xref: /linux/arch/powerpc/kernel/signal.c (revision b8d312aa075f33282565467662c4628dae0a2aff)
1 /*
2  * Common signal handling code for both 32 and 64 bits
3  *
4  *    Copyright (c) 2007 Benjamin Herrenschmidt, IBM Corporation
5  *    Extracted from signal_32.c and signal_64.c
6  *
7  * This file is subject to the terms and conditions of the GNU General
8  * Public License.  See the file README.legal in the main directory of
9  * this archive for more details.
10  */
11 
12 #include <linux/tracehook.h>
13 #include <linux/signal.h>
14 #include <linux/uprobes.h>
15 #include <linux/key.h>
16 #include <linux/context_tracking.h>
17 #include <linux/livepatch.h>
18 #include <linux/syscalls.h>
19 #include <asm/hw_breakpoint.h>
20 #include <linux/uaccess.h>
21 #include <asm/unistd.h>
22 #include <asm/debug.h>
23 #include <asm/tm.h>
24 
25 #include "signal.h"
26 
27 /* Log an error when sending an unhandled signal to a process. Controlled
28  * through debug.exception-trace sysctl.
29  */
30 
31 int show_unhandled_signals = 1;
32 
33 /*
34  * Allocate space for the signal frame
35  */
36 void __user *get_sigframe(struct ksignal *ksig, unsigned long sp,
37 			   size_t frame_size, int is_32)
38 {
39         unsigned long oldsp, newsp;
40 
41         /* Default to using normal stack */
42         oldsp = get_clean_sp(sp, is_32);
43 	oldsp = sigsp(oldsp, ksig);
44 	newsp = (oldsp - frame_size) & ~0xFUL;
45 
46 	/* Check access */
47 	if (!access_ok((void __user *)newsp, oldsp - newsp))
48 		return NULL;
49 
50         return (void __user *)newsp;
51 }
52 
53 static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
54 				  int has_handler)
55 {
56 	unsigned long ret = regs->gpr[3];
57 	int restart = 1;
58 
59 	/* syscall ? */
60 	if (TRAP(regs) != 0x0C00)
61 		return;
62 
63 	/* error signalled ? */
64 	if (!(regs->ccr & 0x10000000))
65 		return;
66 
67 	switch (ret) {
68 	case ERESTART_RESTARTBLOCK:
69 	case ERESTARTNOHAND:
70 		/* ERESTARTNOHAND means that the syscall should only be
71 		 * restarted if there was no handler for the signal, and since
72 		 * we only get here if there is a handler, we dont restart.
73 		 */
74 		restart = !has_handler;
75 		break;
76 	case ERESTARTSYS:
77 		/* ERESTARTSYS means to restart the syscall if there is no
78 		 * handler or the handler was registered with SA_RESTART
79 		 */
80 		restart = !has_handler || (ka->sa.sa_flags & SA_RESTART) != 0;
81 		break;
82 	case ERESTARTNOINTR:
83 		/* ERESTARTNOINTR means that the syscall should be
84 		 * called again after the signal handler returns.
85 		 */
86 		break;
87 	default:
88 		return;
89 	}
90 	if (restart) {
91 		if (ret == ERESTART_RESTARTBLOCK)
92 			regs->gpr[0] = __NR_restart_syscall;
93 		else
94 			regs->gpr[3] = regs->orig_gpr3;
95 		regs->nip -= 4;
96 		regs->result = 0;
97 	} else {
98 		regs->result = -EINTR;
99 		regs->gpr[3] = EINTR;
100 		regs->ccr |= 0x10000000;
101 	}
102 }
103 
104 static void do_signal(struct task_struct *tsk)
105 {
106 	sigset_t *oldset = sigmask_to_save();
107 	struct ksignal ksig = { .sig = 0 };
108 	int ret;
109 	int is32 = is_32bit_task();
110 
111 	BUG_ON(tsk != current);
112 
113 	get_signal(&ksig);
114 
115 	/* Is there any syscall restart business here ? */
116 	check_syscall_restart(tsk->thread.regs, &ksig.ka, ksig.sig > 0);
117 
118 	if (ksig.sig <= 0) {
119 		/* No signal to deliver -- put the saved sigmask back */
120 		restore_saved_sigmask();
121 		tsk->thread.regs->trap = 0;
122 		return;               /* no signals delivered */
123 	}
124 
125 #ifndef CONFIG_PPC_ADV_DEBUG_REGS
126         /*
127 	 * Reenable the DABR before delivering the signal to
128 	 * user space. The DABR will have been cleared if it
129 	 * triggered inside the kernel.
130 	 */
131 	if (tsk->thread.hw_brk.address && tsk->thread.hw_brk.type)
132 		__set_breakpoint(&tsk->thread.hw_brk);
133 #endif
134 	/* Re-enable the breakpoints for the signal stack */
135 	thread_change_pc(tsk, tsk->thread.regs);
136 
137 	rseq_signal_deliver(&ksig, tsk->thread.regs);
138 
139 	if (is32) {
140         	if (ksig.ka.sa.sa_flags & SA_SIGINFO)
141 			ret = handle_rt_signal32(&ksig, oldset, tsk);
142 		else
143 			ret = handle_signal32(&ksig, oldset, tsk);
144 	} else {
145 		ret = handle_rt_signal64(&ksig, oldset, tsk);
146 	}
147 
148 	tsk->thread.regs->trap = 0;
149 	signal_setup_done(ret, &ksig, test_thread_flag(TIF_SINGLESTEP));
150 }
151 
152 void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
153 {
154 	user_exit();
155 
156 	/* Check valid addr_limit, TIF check is done there */
157 	addr_limit_user_check();
158 
159 	if (thread_info_flags & _TIF_UPROBE)
160 		uprobe_notify_resume(regs);
161 
162 	if (thread_info_flags & _TIF_PATCH_PENDING)
163 		klp_update_patch_state(current);
164 
165 	if (thread_info_flags & _TIF_SIGPENDING) {
166 		BUG_ON(regs != current->thread.regs);
167 		do_signal(current);
168 	}
169 
170 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
171 		clear_thread_flag(TIF_NOTIFY_RESUME);
172 		tracehook_notify_resume(regs);
173 		rseq_handle_notify_resume(NULL, regs);
174 	}
175 
176 	user_enter();
177 }
178 
179 unsigned long get_tm_stackpointer(struct task_struct *tsk)
180 {
181 	/* When in an active transaction that takes a signal, we need to be
182 	 * careful with the stack.  It's possible that the stack has moved back
183 	 * up after the tbegin.  The obvious case here is when the tbegin is
184 	 * called inside a function that returns before a tend.  In this case,
185 	 * the stack is part of the checkpointed transactional memory state.
186 	 * If we write over this non transactionally or in suspend, we are in
187 	 * trouble because if we get a tm abort, the program counter and stack
188 	 * pointer will be back at the tbegin but our in memory stack won't be
189 	 * valid anymore.
190 	 *
191 	 * To avoid this, when taking a signal in an active transaction, we
192 	 * need to use the stack pointer from the checkpointed state, rather
193 	 * than the speculated state.  This ensures that the signal context
194 	 * (written tm suspended) will be written below the stack required for
195 	 * the rollback.  The transaction is aborted because of the treclaim,
196 	 * so any memory written between the tbegin and the signal will be
197 	 * rolled back anyway.
198 	 *
199 	 * For signals taken in non-TM or suspended mode, we use the
200 	 * normal/non-checkpointed stack pointer.
201 	 */
202 
203 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
204 	BUG_ON(tsk != current);
205 
206 	if (MSR_TM_ACTIVE(tsk->thread.regs->msr)) {
207 		tm_reclaim_current(TM_CAUSE_SIGNAL);
208 		if (MSR_TM_TRANSACTIONAL(tsk->thread.regs->msr))
209 			return tsk->thread.ckpt_regs.gpr[1];
210 	}
211 #endif
212 	return tsk->thread.regs->gpr[1];
213 }
214