1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * PowerPC version 4 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 5 * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP 6 * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> 7 * Low-level exception handlers and MMU support 8 * rewritten by Paul Mackerras. 9 * Copyright (C) 1996 Paul Mackerras. 10 * MPC8xx modifications by Dan Malek 11 * Copyright (C) 1997 Dan Malek (dmalek@jlc.net). 12 * 13 * This file contains low-level support and setup for PowerPC 8xx 14 * embedded processors, including trap and interrupt dispatch. 15 */ 16 17#include <linux/init.h> 18#include <linux/magic.h> 19#include <linux/pgtable.h> 20#include <linux/sizes.h> 21#include <linux/linkage.h> 22 23#include <asm/processor.h> 24#include <asm/page.h> 25#include <asm/mmu.h> 26#include <asm/cache.h> 27#include <asm/cputable.h> 28#include <asm/thread_info.h> 29#include <asm/ppc_asm.h> 30#include <asm/asm-offsets.h> 31#include <asm/ptrace.h> 32#include <asm/code-patching-asm.h> 33#include <asm/interrupt.h> 34 35/* 36 * Value for the bits that have fixed value in RPN entries. 37 * Also used for tagging DAR for DTLBerror. 38 */ 39#define RPN_PATTERN 0x00f0 40 41#include "head_32.h" 42 43.macro compare_to_kernel_boundary scratch, addr 44#if CONFIG_TASK_SIZE <= 0x80000000 && CONFIG_PAGE_OFFSET >= 0x80000000 45/* By simply checking Address >= 0x80000000, we know if its a kernel address */ 46 not. \scratch, \addr 47#else 48 rlwinm \scratch, \addr, 16, 0xfff8 49 cmpli cr0, \scratch, PAGE_OFFSET@h 50#endif 51.endm 52 53#define PAGE_SHIFT_512K 19 54#define PAGE_SHIFT_8M 23 55 56 __HEAD 57_GLOBAL(_stext); 58_GLOBAL(_start); 59 60/* MPC8xx 61 * This port was done on an MBX board with an 860. Right now I only 62 * support an ELF compressed (zImage) boot from EPPC-Bug because the 63 * code there loads up some registers before calling us: 64 * r3: ptr to board info data 65 * r4: initrd_start or if no initrd then 0 66 * r5: initrd_end - unused if r4 is 0 67 * r6: Start of command line string 68 * r7: End of command line string 69 * 70 * I decided to use conditional compilation instead of checking PVR and 71 * adding more processor specific branches around code I don't need. 72 * Since this is an embedded processor, I also appreciate any memory 73 * savings I can get. 74 * 75 * The MPC8xx does not have any BATs, but it supports large page sizes. 76 * We first initialize the MMU to support 8M byte pages, then load one 77 * entry into each of the instruction and data TLBs to map the first 78 * 8M 1:1. I also mapped an additional I/O space 1:1 so we can get to 79 * the "internal" processor registers before MMU_init is called. 80 * 81 * -- Dan 82 */ 83 .globl __start 84__start: 85 mr r31,r3 /* save device tree ptr */ 86 87 /* We have to turn on the MMU right away so we get cache modes 88 * set correctly. 89 */ 90 bl initial_mmu 91 92/* We now have the lower 8 Meg mapped into TLB entries, and the caches 93 * ready to work. 94 */ 95 96turn_on_mmu: 97 mfmsr r0 98 ori r0,r0,MSR_DR|MSR_IR 99 mtspr SPRN_SRR1,r0 100 lis r0,start_here@h 101 ori r0,r0,start_here@l 102 mtspr SPRN_SRR0,r0 103 rfi /* enables MMU */ 104 105 106#ifdef CONFIG_PERF_EVENTS 107 .align 4 108 109 .globl itlb_miss_counter 110itlb_miss_counter: 111 .space 4 112 113 .globl dtlb_miss_counter 114dtlb_miss_counter: 115 .space 4 116 117 .globl instruction_counter 118instruction_counter: 119 .space 4 120#endif 121 122/* System reset */ 123 EXCEPTION(INTERRUPT_SYSTEM_RESET, Reset, system_reset_exception) 124 125/* Machine check */ 126 START_EXCEPTION(INTERRUPT_MACHINE_CHECK, MachineCheck) 127 EXCEPTION_PROLOG INTERRUPT_MACHINE_CHECK MachineCheck handle_dar_dsisr=1 128 prepare_transfer_to_handler 129 bl machine_check_exception 130 b interrupt_return 131 132/* External interrupt */ 133 EXCEPTION(INTERRUPT_EXTERNAL, HardwareInterrupt, do_IRQ) 134 135/* Alignment exception */ 136 START_EXCEPTION(INTERRUPT_ALIGNMENT, Alignment) 137 EXCEPTION_PROLOG INTERRUPT_ALIGNMENT Alignment handle_dar_dsisr=1 138 prepare_transfer_to_handler 139 bl alignment_exception 140 REST_NVGPRS(r1) 141 b interrupt_return 142 143/* Program check exception */ 144 START_EXCEPTION(INTERRUPT_PROGRAM, ProgramCheck) 145 EXCEPTION_PROLOG INTERRUPT_PROGRAM ProgramCheck 146 prepare_transfer_to_handler 147 bl program_check_exception 148 REST_NVGPRS(r1) 149 b interrupt_return 150 151/* Decrementer */ 152 EXCEPTION(INTERRUPT_DECREMENTER, Decrementer, timer_interrupt) 153 154/* System call */ 155 START_EXCEPTION(INTERRUPT_SYSCALL, SystemCall) 156 SYSCALL_ENTRY INTERRUPT_SYSCALL 157 158/* Single step - not used on 601 */ 159 EXCEPTION(INTERRUPT_TRACE, SingleStep, single_step_exception) 160 161/* On the MPC8xx, this is a software emulation interrupt. It occurs 162 * for all unimplemented and illegal instructions. 163 */ 164 START_EXCEPTION(INTERRUPT_SOFT_EMU_8xx, SoftEmu) 165 EXCEPTION_PROLOG INTERRUPT_SOFT_EMU_8xx SoftEmu 166 prepare_transfer_to_handler 167 bl emulation_assist_interrupt 168 REST_NVGPRS(r1) 169 b interrupt_return 170 171/* 172 * For the MPC8xx, this is a software tablewalk to load the instruction 173 * TLB. The task switch loads the M_TWB register with the pointer to the first 174 * level table. 175 * If we discover there is no second level table (value is zero) or if there 176 * is an invalid pte, we load that into the TLB, which causes another fault 177 * into the TLB Error interrupt where we can handle such problems. 178 * We have to use the MD_xxx registers for the tablewalk because the 179 * equivalent MI_xxx registers only perform the attribute functions. 180 */ 181 182#ifdef CONFIG_8xx_CPU15 183#define INVALIDATE_ADJACENT_PAGES_CPU15(addr, tmp) \ 184 addi tmp, addr, PAGE_SIZE; \ 185 tlbie tmp; \ 186 addi tmp, addr, -PAGE_SIZE; \ 187 tlbie tmp 188#else 189#define INVALIDATE_ADJACENT_PAGES_CPU15(addr, tmp) 190#endif 191 192 START_EXCEPTION(INTERRUPT_INST_TLB_MISS_8xx, InstructionTLBMiss) 193 mtspr SPRN_SPRG_SCRATCH2, r10 194 mtspr SPRN_M_TW, r11 195 196 /* If we are faulting a kernel address, we have to use the 197 * kernel page tables. 198 */ 199 mfspr r10, SPRN_SRR0 /* Get effective address of fault */ 200 INVALIDATE_ADJACENT_PAGES_CPU15(r10, r11) 201 mtspr SPRN_MD_EPN, r10 202#ifdef CONFIG_EXECMEM 203 mfcr r11 204 compare_to_kernel_boundary r10, r10 205#endif 206 mfspr r10, SPRN_M_TWB /* Get level 1 table */ 207#ifdef CONFIG_EXECMEM 208 blt+ 3f 209 rlwinm r10, r10, 0, 20, 31 210 oris r10, r10, (swapper_pg_dir - PAGE_OFFSET)@ha 2113: 212 mtcr r11 213#endif 214 lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10) /* Get level 1 entry */ 215 mtspr SPRN_MD_TWC, r11 216 mfspr r10, SPRN_MD_TWC 217 lwz r10, 0(r10) /* Get the pte */ 218 rlwimi r11, r10, 0, _PAGE_GUARDED | _PAGE_ACCESSED 219 rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K 220 mtspr SPRN_MI_TWC, r11 221 /* The Linux PTE won't go exactly into the MMU TLB. 222 * Software indicator bits 20 and 23 must be clear. 223 * Software indicator bits 22, 24, 25, 26, and 27 must be 224 * set. All other Linux PTE bits control the behavior 225 * of the MMU. 226 */ 227 rlwinm r10, r10, 0, ~0x0f00 /* Clear bits 20-23 */ 228 rlwimi r10, r10, 4, 0x0400 /* Copy _PAGE_EXEC into bit 21 */ 229 ori r10, r10, RPN_PATTERN | 0x200 /* Set 22 and 24-27 */ 230 mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ 231 232 /* Restore registers */ 2330: mfspr r10, SPRN_SPRG_SCRATCH2 234 mfspr r11, SPRN_M_TW 235 rfi 236 patch_site 0b, patch__itlbmiss_exit_1 237 238#ifdef CONFIG_PERF_EVENTS 239 patch_site 0f, patch__itlbmiss_perf 2400: lwz r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) 241 addi r10, r10, 1 242 stw r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) 243 mfspr r10, SPRN_SPRG_SCRATCH2 244 mfspr r11, SPRN_M_TW 245 rfi 246#endif 247 248 START_EXCEPTION(INTERRUPT_DATA_TLB_MISS_8xx, DataStoreTLBMiss) 249 mtspr SPRN_SPRG_SCRATCH2, r10 250 mtspr SPRN_M_TW, r11 251 mfcr r11 252 253 /* If we are faulting a kernel address, we have to use the 254 * kernel page tables. 255 */ 256 mfspr r10, SPRN_MD_EPN 257 compare_to_kernel_boundary r10, r10 258 mfspr r10, SPRN_M_TWB /* Get level 1 table */ 259 blt+ 3f 260 rlwinm r10, r10, 0, 20, 31 261 oris r10, r10, (swapper_pg_dir - PAGE_OFFSET)@ha 2623: 263 mtcr r11 264 lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10) /* Get level 1 entry */ 265 266 mtspr SPRN_MD_TWC, r11 267 mfspr r10, SPRN_MD_TWC 268 lwz r10, 0(r10) /* Get the pte */ 269 270 /* Insert Guarded and Accessed flags into the TWC from the Linux PTE. 271 * It is bit 27 of both the Linux PTE and the TWC (at least 272 * I got that right :-). It will be better when we can put 273 * this into the Linux pgd/pmd and load it in the operation 274 * above. 275 */ 276 rlwimi r11, r10, 0, _PAGE_GUARDED | _PAGE_ACCESSED 277 rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K 278 mtspr SPRN_MD_TWC, r11 279 280 /* The Linux PTE won't go exactly into the MMU TLB. 281 * Software indicator bits 24, 25, 26, and 27 must be 282 * set. All other Linux PTE bits control the behavior 283 * of the MMU. 284 */ 285 li r11, RPN_PATTERN 286 rlwimi r10, r11, 0, 24, 27 /* Set 24-27 */ 287 mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ 288 mtspr SPRN_DAR, r11 /* Tag DAR */ 289 290 /* Restore registers */ 291 2920: mfspr r10, SPRN_SPRG_SCRATCH2 293 mfspr r11, SPRN_M_TW 294 rfi 295 patch_site 0b, patch__dtlbmiss_exit_1 296 297#ifdef CONFIG_PERF_EVENTS 298 patch_site 0f, patch__dtlbmiss_perf 2990: lwz r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0) 300 addi r10, r10, 1 301 stw r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0) 302 mfspr r10, SPRN_SPRG_SCRATCH2 303 mfspr r11, SPRN_M_TW 304 rfi 305#endif 306 307/* This is an instruction TLB error on the MPC8xx. This could be due 308 * to many reasons, such as executing guarded memory or illegal instruction 309 * addresses. There is nothing to do but handle a big time error fault. 310 */ 311 START_EXCEPTION(INTERRUPT_INST_TLB_ERROR_8xx, InstructionTLBError) 312 /* 0x400 is InstructionAccess exception, needed by bad_page_fault() */ 313 EXCEPTION_PROLOG INTERRUPT_INST_STORAGE InstructionTLBError 314 andis. r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */ 315 andis. r10,r9,SRR1_ISI_NOPT@h 316 beq+ .Litlbie 317 tlbie r12 318.Litlbie: 319 stw r12, _DAR(r11) 320 stw r5, _DSISR(r11) 321 prepare_transfer_to_handler 322 bl do_page_fault 323 b interrupt_return 324 325/* This is the data TLB error on the MPC8xx. This could be due to 326 * many reasons, including a dirty update to a pte. We bail out to 327 * a higher level function that can handle it. 328 */ 329 START_EXCEPTION(INTERRUPT_DATA_TLB_ERROR_8xx, DataTLBError) 330 EXCEPTION_PROLOG_0 handle_dar_dsisr=1 331 mfspr r11, SPRN_DAR 332 cmpwi cr1, r11, RPN_PATTERN 333 beq- cr1, FixupDAR /* must be a buggy dcbX, icbi insn. */ 334DARFixed:/* Return from dcbx instruction bug workaround */ 335 EXCEPTION_PROLOG_1 336 /* 0x300 is DataAccess exception, needed by bad_page_fault() */ 337 EXCEPTION_PROLOG_2 INTERRUPT_DATA_STORAGE DataTLBError handle_dar_dsisr=1 338 lwz r4, _DAR(r11) 339 lwz r5, _DSISR(r11) 340 andis. r10,r5,DSISR_NOHPTE@h 341 beq+ .Ldtlbie 342 tlbie r4 343.Ldtlbie: 344 prepare_transfer_to_handler 345 bl do_page_fault 346 b interrupt_return 347 348#ifdef CONFIG_VMAP_STACK 349 vmap_stack_overflow_exception 350#endif 351 352/* On the MPC8xx, these next four traps are used for development 353 * support of breakpoints and such. Someday I will get around to 354 * using them. 355 */ 356 START_EXCEPTION(INTERRUPT_DATA_BREAKPOINT_8xx, DataBreakpoint) 357 EXCEPTION_PROLOG_0 handle_dar_dsisr=1 358 mfspr r11, SPRN_SRR0 359 cmplwi cr1, r11, (.Ldtlbie - PAGE_OFFSET)@l 360 cmplwi cr7, r11, (.Litlbie - PAGE_OFFSET)@l 361 cror 4*cr1+eq, 4*cr1+eq, 4*cr7+eq 362 bne cr1, 1f 363 mtcr r10 364 mfspr r10, SPRN_SPRG_SCRATCH0 365 mfspr r11, SPRN_SPRG_SCRATCH1 366 rfi 367 3681: EXCEPTION_PROLOG_1 369 EXCEPTION_PROLOG_2 INTERRUPT_DATA_BREAKPOINT_8xx DataBreakpoint handle_dar_dsisr=1 370 mfspr r4,SPRN_BAR 371 stw r4,_DAR(r11) 372 prepare_transfer_to_handler 373 bl do_break 374 REST_NVGPRS(r1) 375 b interrupt_return 376 377#ifdef CONFIG_PERF_EVENTS 378 START_EXCEPTION(INTERRUPT_INST_BREAKPOINT_8xx, InstructionBreakpoint) 379 mtspr SPRN_SPRG_SCRATCH0, r10 380 lwz r10, (instruction_counter - PAGE_OFFSET)@l(0) 381 addi r10, r10, -1 382 stw r10, (instruction_counter - PAGE_OFFSET)@l(0) 383 lis r10, 0xffff 384 ori r10, r10, 0x01 385 mtspr SPRN_COUNTA, r10 386 mfspr r10, SPRN_SPRG_SCRATCH0 387 rfi 388#else 389 EXCEPTION(INTERRUPT_INST_BREAKPOINT_8xx, Trap_1d, unknown_exception) 390#endif 391 EXCEPTION(0x1e00, Trap_1e, unknown_exception) 392 EXCEPTION(0x1f00, Trap_1f, unknown_exception) 393 394 __HEAD 395 . = 0x2000 396 397/* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions 398 * by decoding the registers used by the dcbx instruction and adding them. 399 * DAR is set to the calculated address. 400 */ 401FixupDAR:/* Entry point for dcbx workaround. */ 402 mtspr SPRN_M_TW, r10 403 /* fetch instruction from memory. */ 404 mfspr r10, SPRN_SRR0 405 mtspr SPRN_MD_EPN, r10 406 rlwinm r11, r10, 16, 0xfff8 407 cmpli cr1, r11, PAGE_OFFSET@h 408 mfspr r11, SPRN_M_TWB /* Get level 1 table */ 409 blt+ cr1, 3f 410 411 /* create physical page address from effective address */ 412 tophys(r11, r10) 413 mfspr r11, SPRN_M_TWB /* Get level 1 table */ 414 rlwinm r11, r11, 0, 20, 31 415 oris r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha 4163: 417 lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ 418 mtspr SPRN_MD_TWC, r11 419 mtcrf 0x01, r11 420 mfspr r11, SPRN_MD_TWC 421 lwz r11, 0(r11) /* Get the pte */ 422 bt 28,200f /* bit 28 = Large page (8M) */ 423 /* concat physical page address(r11) and page offset(r10) */ 424 rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31 425201: lwz r11,0(r11) 426/* Check if it really is a dcbx instruction. */ 427/* dcbt and dcbtst does not generate DTLB Misses/Errors, 428 * no need to include them here */ 429 xoris r10, r11, 0x7c00 /* check if major OP code is 31 */ 430 rlwinm r10, r10, 0, 21, 5 431 cmpwi cr1, r10, 2028 /* Is dcbz? */ 432 beq+ cr1, 142f 433 cmpwi cr1, r10, 940 /* Is dcbi? */ 434 beq+ cr1, 142f 435 cmpwi cr1, r10, 108 /* Is dcbst? */ 436 beq+ cr1, 144f /* Fix up store bit! */ 437 cmpwi cr1, r10, 172 /* Is dcbf? */ 438 beq+ cr1, 142f 439 cmpwi cr1, r10, 1964 /* Is icbi? */ 440 beq+ cr1, 142f 441141: mfspr r10,SPRN_M_TW 442 b DARFixed /* Nope, go back to normal TLB processing */ 443 444200: 445 /* concat physical page address(r11) and page offset(r10) */ 446 rlwimi r11, r10, 0, 32 - PAGE_SHIFT_8M, 31 447 b 201b 448 449144: mfspr r10, SPRN_DSISR 450 rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */ 451 mtspr SPRN_DSISR, r10 452142: /* continue, it was a dcbx, dcbi instruction. */ 453 mfctr r10 454 mtdar r10 /* save ctr reg in DAR */ 455 rlwinm r10, r11, 24, 24, 28 /* offset into jump table for reg RB */ 456 addi r10, r10, 150f@l /* add start of table */ 457 mtctr r10 /* load ctr with jump address */ 458 xor r10, r10, r10 /* sum starts at zero */ 459 bctr /* jump into table */ 460150: 461 add r10, r10, r0 ;b 151f 462 add r10, r10, r1 ;b 151f 463 add r10, r10, r2 ;b 151f 464 add r10, r10, r3 ;b 151f 465 add r10, r10, r4 ;b 151f 466 add r10, r10, r5 ;b 151f 467 add r10, r10, r6 ;b 151f 468 add r10, r10, r7 ;b 151f 469 add r10, r10, r8 ;b 151f 470 add r10, r10, r9 ;b 151f 471 mtctr r11 ;b 154f /* r10 needs special handling */ 472 mtctr r11 ;b 153f /* r11 needs special handling */ 473 add r10, r10, r12 ;b 151f 474 add r10, r10, r13 ;b 151f 475 add r10, r10, r14 ;b 151f 476 add r10, r10, r15 ;b 151f 477 add r10, r10, r16 ;b 151f 478 add r10, r10, r17 ;b 151f 479 add r10, r10, r18 ;b 151f 480 add r10, r10, r19 ;b 151f 481 add r10, r10, r20 ;b 151f 482 add r10, r10, r21 ;b 151f 483 add r10, r10, r22 ;b 151f 484 add r10, r10, r23 ;b 151f 485 add r10, r10, r24 ;b 151f 486 add r10, r10, r25 ;b 151f 487 add r10, r10, r26 ;b 151f 488 add r10, r10, r27 ;b 151f 489 add r10, r10, r28 ;b 151f 490 add r10, r10, r29 ;b 151f 491 add r10, r10, r30 ;b 151f 492 add r10, r10, r31 493151: 494 rlwinm r11,r11,19,24,28 /* offset into jump table for reg RA */ 495 cmpwi cr1, r11, 0 496 beq cr1, 152f /* if reg RA is zero, don't add it */ 497 addi r11, r11, 150b@l /* add start of table */ 498 mtctr r11 /* load ctr with jump address */ 499 rlwinm r11,r11,0,16,10 /* make sure we don't execute this more than once */ 500 bctr /* jump into table */ 501152: 502 mfdar r11 503 mtctr r11 /* restore ctr reg from DAR */ 504 mfspr r11, SPRN_SPRG_THREAD 505 stw r10, DAR(r11) 506 mfspr r10, SPRN_DSISR 507 stw r10, DSISR(r11) 508 mfspr r10,SPRN_M_TW 509 b DARFixed /* Go back to normal TLB handling */ 510 511 /* special handling for r10,r11 since these are modified already */ 512153: mfspr r11, SPRN_SPRG_SCRATCH1 /* load r11 from SPRN_SPRG_SCRATCH1 */ 513 add r10, r10, r11 /* add it */ 514 mfctr r11 /* restore r11 */ 515 b 151b 516154: mfspr r11, SPRN_SPRG_SCRATCH0 /* load r10 from SPRN_SPRG_SCRATCH0 */ 517 add r10, r10, r11 /* add it */ 518 mfctr r11 /* restore r11 */ 519 b 151b 520 521/* 522 * This is where the main kernel code starts. 523 */ 524start_here: 525 /* ptr to current */ 526 lis r2,init_task@h 527 ori r2,r2,init_task@l 528 529 /* ptr to phys current thread */ 530 tophys(r4,r2) 531 addi r4,r4,THREAD /* init task's THREAD */ 532 mtspr SPRN_SPRG_THREAD,r4 533 534 /* stack */ 535 lis r1,init_thread_union@ha 536 addi r1,r1,init_thread_union@l 537 lis r0, STACK_END_MAGIC@h 538 ori r0, r0, STACK_END_MAGIC@l 539 stw r0, 0(r1) 540 li r0,0 541 stwu r0,THREAD_SIZE-STACK_FRAME_MIN_SIZE(r1) 542 543 lis r6, swapper_pg_dir@ha 544 tophys(r6,r6) 545 mtspr SPRN_M_TWB, r6 546 547 bl early_init /* We have to do this with MMU on */ 548 549/* 550 * Decide what sort of machine this is and initialize the MMU. 551 */ 552#ifdef CONFIG_KASAN 553 bl kasan_early_init 554#endif 555 li r3,0 556 mr r4,r31 557 bl machine_init 558 bl MMU_init 559 560/* 561 * Go back to running unmapped so we can load up new values 562 * and change to using our exception vectors. 563 * On the 8xx, all we have to do is invalidate the TLB to clear 564 * the old 8M byte TLB mappings and load the page table base register. 565 */ 566 /* The right way to do this would be to track it down through 567 * init's THREAD like the context switch code does, but this is 568 * easier......until someone changes init's static structures. 569 */ 570 lis r4,2f@h 571 ori r4,r4,2f@l 572 tophys(r4,r4) 573 li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR) 574 mtspr SPRN_SRR0,r4 575 mtspr SPRN_SRR1,r3 576 rfi 577/* Load up the kernel context */ 5782: 579#ifdef CONFIG_PIN_TLB_IMMR 580 lis r0, MD_TWAM@h 581 oris r0, r0, 0x1f00 582 mtspr SPRN_MD_CTR, r0 583 LOAD_REG_IMMEDIATE(r0, VIRT_IMMR_BASE | MD_EVALID) 584 tlbie r0 585 mtspr SPRN_MD_EPN, r0 586 LOAD_REG_IMMEDIATE(r0, MD_SVALID | MD_PS512K | MD_GUARDED) 587 mtspr SPRN_MD_TWC, r0 588 mfspr r0, SPRN_IMMR 589 rlwinm r0, r0, 0, 0xfff80000 590 ori r0, r0, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | \ 591 _PAGE_NO_CACHE | _PAGE_PRESENT 592 mtspr SPRN_MD_RPN, r0 593 lis r0, (MD_TWAM | MD_RSV4I)@h 594 mtspr SPRN_MD_CTR, r0 595#endif 596#if !defined(CONFIG_PIN_TLB_DATA) && !defined(CONFIG_PIN_TLB_IMMR) 597 lis r0, MD_TWAM@h 598 mtspr SPRN_MD_CTR, r0 599#endif 600 tlbia /* Clear all TLB entries */ 601 sync /* wait for tlbia/tlbie to finish */ 602 603 /* set up the PTE pointers for the Abatron bdiGDB. 604 */ 605 lis r5, abatron_pteptrs@h 606 ori r5, r5, abatron_pteptrs@l 607 stw r5, 0xf0(0) /* Must match your Abatron config file */ 608 tophys(r5,r5) 609 lis r6, swapper_pg_dir@h 610 ori r6, r6, swapper_pg_dir@l 611 stw r6, 0(r5) 612 613/* Now turn on the MMU for real! */ 614 li r4,MSR_KERNEL 615 lis r3,start_kernel@h 616 ori r3,r3,start_kernel@l 617 mtspr SPRN_SRR0,r3 618 mtspr SPRN_SRR1,r4 619 rfi /* enable MMU and jump to start_kernel */ 620 621/* Set up the initial MMU state so we can do the first level of 622 * kernel initialization. This maps the first 8 MBytes of memory 1:1 623 * virtual to physical. Also, set the cache mode since that is defined 624 * by TLB entries and perform any additional mapping (like of the IMMR). 625 * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel, 626 * 24 Mbytes of data, and the 512k IMMR space. Anything not covered by 627 * these mappings is mapped by page tables. 628 */ 629SYM_FUNC_START_LOCAL(initial_mmu) 630 li r8, 0 631 mtspr SPRN_MI_CTR, r8 /* remove PINNED ITLB entries */ 632 lis r10, MD_TWAM@h 633 mtspr SPRN_MD_CTR, r10 /* remove PINNED DTLB entries */ 634 635 tlbia /* Invalidate all TLB entries */ 636 637 lis r8, MI_APG_INIT@h /* Set protection modes */ 638 ori r8, r8, MI_APG_INIT@l 639 mtspr SPRN_MI_AP, r8 640 lis r8, MD_APG_INIT@h 641 ori r8, r8, MD_APG_INIT@l 642 mtspr SPRN_MD_AP, r8 643 644 /* Map the lower RAM (up to 32 Mbytes) into the ITLB and DTLB */ 645 lis r8, MI_RSV4I@h 646 ori r8, r8, 0x1c00 647 oris r12, r10, MD_RSV4I@h 648 ori r12, r12, 0x1c00 649 li r9, 4 /* up to 4 pages of 8M */ 650 mtctr r9 651 lis r9, KERNELBASE@h /* Create vaddr for TLB */ 652 li r10, MI_PS8MEG | _PMD_ACCESSED | MI_SVALID 653 li r11, MI_BOOTINIT /* Create RPN for address 0 */ 6541: 655 mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */ 656 addi r8, r8, 0x100 657 ori r0, r9, MI_EVALID /* Mark it valid */ 658 mtspr SPRN_MI_EPN, r0 659 mtspr SPRN_MI_TWC, r10 660 mtspr SPRN_MI_RPN, r11 /* Store TLB entry */ 661 mtspr SPRN_MD_CTR, r12 662 addi r12, r12, 0x100 663 mtspr SPRN_MD_EPN, r0 664 mtspr SPRN_MD_TWC, r10 665 mtspr SPRN_MD_RPN, r11 666 addis r9, r9, 0x80 667 addis r11, r11, 0x80 668 669 bdnz 1b 670 671 /* Since the cache is enabled according to the information we 672 * just loaded into the TLB, invalidate and enable the caches here. 673 * We should probably check/set other modes....later. 674 */ 675 lis r8, IDC_INVALL@h 676 mtspr SPRN_IC_CST, r8 677 mtspr SPRN_DC_CST, r8 678 lis r8, IDC_ENABLE@h 679 mtspr SPRN_IC_CST, r8 680 mtspr SPRN_DC_CST, r8 681 /* Disable debug mode entry on breakpoints */ 682 mfspr r8, SPRN_DER 683#ifdef CONFIG_PERF_EVENTS 684 rlwinm r8, r8, 0, ~0xc 685#else 686 rlwinm r8, r8, 0, ~0x8 687#endif 688 mtspr SPRN_DER, r8 689 blr 690SYM_FUNC_END(initial_mmu) 691 692_GLOBAL(mmu_pin_tlb) 693 lis r9, (1f - PAGE_OFFSET)@h 694 ori r9, r9, (1f - PAGE_OFFSET)@l 695 mfmsr r10 696 mflr r11 697 li r12, MSR_KERNEL & ~(MSR_IR | MSR_DR | MSR_RI) 698 rlwinm r0, r10, 0, ~MSR_RI 699 rlwinm r0, r0, 0, ~MSR_EE 700 mtmsr r0 701 isync 702 .align 4 703 mtspr SPRN_SRR0, r9 704 mtspr SPRN_SRR1, r12 705 rfi 7061: 707 li r5, 0 708 lis r6, MD_TWAM@h 709 mtspr SPRN_MI_CTR, r5 710 mtspr SPRN_MD_CTR, r6 711 tlbia 712 713 LOAD_REG_IMMEDIATE(r5, 28 << 8) 714 LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET) 715 LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG | _PMD_ACCESSED) 716 LOAD_REG_IMMEDIATE(r8, 0xf0 | _PAGE_RO | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT) 717 LOAD_REG_ADDR(r9, _sinittext) 718 li r0, 4 719 mtctr r0 720 7212: ori r0, r6, MI_EVALID 722 mtspr SPRN_MI_CTR, r5 723 mtspr SPRN_MI_EPN, r0 724 mtspr SPRN_MI_TWC, r7 725 mtspr SPRN_MI_RPN, r8 726 addi r5, r5, 0x100 727 addis r6, r6, SZ_8M@h 728 addis r8, r8, SZ_8M@h 729 cmplw r6, r9 730 bdnzt lt, 2b 731 lis r0, MI_RSV4I@h 732 mtspr SPRN_MI_CTR, r0 733 734 LOAD_REG_IMMEDIATE(r5, 28 << 8 | MD_TWAM) 735#ifdef CONFIG_PIN_TLB_DATA 736 LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET) 737 LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG | _PMD_ACCESSED) 738 li r8, 0 739#ifdef CONFIG_PIN_TLB_IMMR 740 li r0, 3 741#else 742 li r0, 4 743#endif 744 mtctr r0 745 cmpwi r4, 0 746 beq 4f 747 LOAD_REG_ADDR(r9, _sinittext) 748 7492: ori r0, r6, MD_EVALID 750 ori r12, r8, 0xf0 | _PAGE_RO | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT 751 mtspr SPRN_MD_CTR, r5 752 mtspr SPRN_MD_EPN, r0 753 mtspr SPRN_MD_TWC, r7 754 mtspr SPRN_MD_RPN, r12 755 addi r5, r5, 0x100 756 addis r6, r6, SZ_8M@h 757 addis r8, r8, SZ_8M@h 758 cmplw r6, r9 759 bdnzt lt, 2b 7604: 7612: ori r0, r6, MD_EVALID 762 ori r12, r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT 763 mtspr SPRN_MD_CTR, r5 764 mtspr SPRN_MD_EPN, r0 765 mtspr SPRN_MD_TWC, r7 766 mtspr SPRN_MD_RPN, r12 767 addi r5, r5, 0x100 768 addis r6, r6, SZ_8M@h 769 addis r8, r8, SZ_8M@h 770 cmplw r6, r3 771 bdnzt lt, 2b 772#endif 773#ifdef CONFIG_PIN_TLB_IMMR 774 LOAD_REG_IMMEDIATE(r0, VIRT_IMMR_BASE | MD_EVALID) 775 LOAD_REG_IMMEDIATE(r7, MD_SVALID | MD_PS512K | MD_GUARDED | _PMD_ACCESSED) 776 mfspr r8, SPRN_IMMR 777 rlwinm r8, r8, 0, 0xfff80000 778 ori r8, r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | \ 779 _PAGE_NO_CACHE | _PAGE_PRESENT 780 mtspr SPRN_MD_CTR, r5 781 mtspr SPRN_MD_EPN, r0 782 mtspr SPRN_MD_TWC, r7 783 mtspr SPRN_MD_RPN, r8 784#endif 785#if defined(CONFIG_PIN_TLB_IMMR) || defined(CONFIG_PIN_TLB_DATA) 786 lis r0, (MD_RSV4I | MD_TWAM)@h 787 mtspr SPRN_MD_CTR, r0 788#endif 789 mtspr SPRN_SRR1, r10 790 mtspr SPRN_SRR0, r11 791 rfi 792