1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Boot code and exception vectors for Book3E processors 4 * 5 * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. 6 */ 7 8#include <linux/threads.h> 9#include <asm/reg.h> 10#include <asm/page.h> 11#include <asm/ppc_asm.h> 12#include <asm/asm-offsets.h> 13#include <asm/cputable.h> 14#include <asm/setup.h> 15#include <asm/thread_info.h> 16#include <asm/reg_a2.h> 17#include <asm/exception-64e.h> 18#include <asm/bug.h> 19#include <asm/irqflags.h> 20#include <asm/ptrace.h> 21#include <asm/ppc-opcode.h> 22#include <asm/mmu.h> 23#include <asm/hw_irq.h> 24#include <asm/kvm_asm.h> 25#include <asm/kvm_booke_hv_asm.h> 26#include <asm/feature-fixups.h> 27#include <asm/context_tracking.h> 28 29/* 64e interrupt returns always use SRR registers */ 30#define fast_interrupt_return fast_interrupt_return_srr 31#define interrupt_return interrupt_return_srr 32 33/* XXX This will ultimately add space for a special exception save 34 * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc... 35 * when taking special interrupts. For now we don't support that, 36 * special interrupts from within a non-standard level will probably 37 * blow you up 38 */ 39#define SPECIAL_EXC_SRR0 0 40#define SPECIAL_EXC_SRR1 1 41#define SPECIAL_EXC_SPRG_GEN 2 42#define SPECIAL_EXC_SPRG_TLB 3 43#define SPECIAL_EXC_MAS0 4 44#define SPECIAL_EXC_MAS1 5 45#define SPECIAL_EXC_MAS2 6 46#define SPECIAL_EXC_MAS3 7 47#define SPECIAL_EXC_MAS6 8 48#define SPECIAL_EXC_MAS7 9 49#define SPECIAL_EXC_MAS5 10 /* E.HV only */ 50#define SPECIAL_EXC_MAS8 11 /* E.HV only */ 51#define SPECIAL_EXC_IRQHAPPENED 12 52#define SPECIAL_EXC_DEAR 13 53#define SPECIAL_EXC_ESR 14 54#define SPECIAL_EXC_SOFTE 15 55#define SPECIAL_EXC_CSRR0 16 56#define SPECIAL_EXC_CSRR1 17 57/* must be even to keep 16-byte stack alignment */ 58#define SPECIAL_EXC_END 18 59 60#define SPECIAL_EXC_FRAME_SIZE (INT_FRAME_SIZE + SPECIAL_EXC_END * 8) 61#define SPECIAL_EXC_FRAME_OFFS (INT_FRAME_SIZE - 288) 62 63#define SPECIAL_EXC_STORE(reg, name) \ 64 std reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1) 65 66#define SPECIAL_EXC_LOAD(reg, name) \ 67 ld reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1) 68 69special_reg_save: 70 /* 71 * We only need (or have stack space) to save this stuff if 72 * we interrupted the kernel. 73 */ 74 ld r3,_MSR(r1) 75 andi. r3,r3,MSR_PR 76 bnelr 77 78 /* 79 * Advance to the next TLB exception frame for handler 80 * types that don't do it automatically. 81 */ 82 LOAD_REG_ADDR(r11,extlb_level_exc) 83 lwz r12,0(r11) 84 mfspr r10,SPRN_SPRG_TLB_EXFRAME 85 add r10,r10,r12 86 mtspr SPRN_SPRG_TLB_EXFRAME,r10 87 88 /* 89 * Save registers needed to allow nesting of certain exceptions 90 * (such as TLB misses) inside special exception levels 91 */ 92 mfspr r10,SPRN_SRR0 93 SPECIAL_EXC_STORE(r10,SRR0) 94 mfspr r10,SPRN_SRR1 95 SPECIAL_EXC_STORE(r10,SRR1) 96 mfspr r10,SPRN_SPRG_GEN_SCRATCH 97 SPECIAL_EXC_STORE(r10,SPRG_GEN) 98 mfspr r10,SPRN_SPRG_TLB_SCRATCH 99 SPECIAL_EXC_STORE(r10,SPRG_TLB) 100 mfspr r10,SPRN_MAS0 101 SPECIAL_EXC_STORE(r10,MAS0) 102 mfspr r10,SPRN_MAS1 103 SPECIAL_EXC_STORE(r10,MAS1) 104 mfspr r10,SPRN_MAS2 105 SPECIAL_EXC_STORE(r10,MAS2) 106 mfspr r10,SPRN_MAS3 107 SPECIAL_EXC_STORE(r10,MAS3) 108 mfspr r10,SPRN_MAS6 109 SPECIAL_EXC_STORE(r10,MAS6) 110 mfspr r10,SPRN_MAS7 111 SPECIAL_EXC_STORE(r10,MAS7) 112BEGIN_FTR_SECTION 113 mfspr r10,SPRN_MAS5 114 SPECIAL_EXC_STORE(r10,MAS5) 115 mfspr r10,SPRN_MAS8 116 SPECIAL_EXC_STORE(r10,MAS8) 117 118 /* MAS5/8 could have inappropriate values if we interrupted KVM code */ 119 li r10,0 120 mtspr SPRN_MAS5,r10 121 mtspr SPRN_MAS8,r10 122END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) 123 mfspr r10,SPRN_DEAR 124 SPECIAL_EXC_STORE(r10,DEAR) 125 mfspr r10,SPRN_ESR 126 SPECIAL_EXC_STORE(r10,ESR) 127 128 ld r10,_NIP(r1) 129 SPECIAL_EXC_STORE(r10,CSRR0) 130 ld r10,_MSR(r1) 131 SPECIAL_EXC_STORE(r10,CSRR1) 132 133 blr 134 135ret_from_level_except: 136 ld r3,_MSR(r1) 137 andi. r3,r3,MSR_PR 138 beq 1f 139 REST_NVGPRS(r1) 140 b interrupt_return 1411: 142 143 LOAD_REG_ADDR(r11,extlb_level_exc) 144 lwz r12,0(r11) 145 mfspr r10,SPRN_SPRG_TLB_EXFRAME 146 sub r10,r10,r12 147 mtspr SPRN_SPRG_TLB_EXFRAME,r10 148 149 /* 150 * It's possible that the special level exception interrupted a 151 * TLB miss handler, and inserted the same entry that the 152 * interrupted handler was about to insert. On CPUs without TLB 153 * write conditional, this can result in a duplicate TLB entry. 154 * Wipe all non-bolted entries to be safe. 155 * 156 * Note that this doesn't protect against any TLB misses 157 * we may take accessing the stack from here to the end of 158 * the special level exception. It's not clear how we can 159 * reasonably protect against that, but only CPUs with 160 * neither TLB write conditional nor bolted kernel memory 161 * are affected. Do any such CPUs even exist? 162 */ 163 PPC_TLBILX_ALL(0,R0) 164 165 REST_NVGPRS(r1) 166 167 SPECIAL_EXC_LOAD(r10,SRR0) 168 mtspr SPRN_SRR0,r10 169 SPECIAL_EXC_LOAD(r10,SRR1) 170 mtspr SPRN_SRR1,r10 171 SPECIAL_EXC_LOAD(r10,SPRG_GEN) 172 mtspr SPRN_SPRG_GEN_SCRATCH,r10 173 SPECIAL_EXC_LOAD(r10,SPRG_TLB) 174 mtspr SPRN_SPRG_TLB_SCRATCH,r10 175 SPECIAL_EXC_LOAD(r10,MAS0) 176 mtspr SPRN_MAS0,r10 177 SPECIAL_EXC_LOAD(r10,MAS1) 178 mtspr SPRN_MAS1,r10 179 SPECIAL_EXC_LOAD(r10,MAS2) 180 mtspr SPRN_MAS2,r10 181 SPECIAL_EXC_LOAD(r10,MAS3) 182 mtspr SPRN_MAS3,r10 183 SPECIAL_EXC_LOAD(r10,MAS6) 184 mtspr SPRN_MAS6,r10 185 SPECIAL_EXC_LOAD(r10,MAS7) 186 mtspr SPRN_MAS7,r10 187BEGIN_FTR_SECTION 188 SPECIAL_EXC_LOAD(r10,MAS5) 189 mtspr SPRN_MAS5,r10 190 SPECIAL_EXC_LOAD(r10,MAS8) 191 mtspr SPRN_MAS8,r10 192END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) 193 194 SPECIAL_EXC_LOAD(r10,DEAR) 195 mtspr SPRN_DEAR,r10 196 SPECIAL_EXC_LOAD(r10,ESR) 197 mtspr SPRN_ESR,r10 198 199 stdcx. r0,0,r1 /* to clear the reservation */ 200 201 REST_GPRS(2, 9, r1) 202 203 ld r10,_CTR(r1) 204 ld r11,_XER(r1) 205 mtctr r10 206 mtxer r11 207 208 blr 209 210.macro ret_from_level srr0 srr1 paca_ex scratch 211 bl ret_from_level_except 212 213 ld r10,_LINK(r1) 214 ld r11,_CCR(r1) 215 ld r0,GPR13(r1) 216 mtlr r10 217 mtcr r11 218 219 REST_GPRS(10, 12, r1) 220 mtspr \scratch,r0 221 222 std r10,\paca_ex+EX_R10(r13); 223 std r11,\paca_ex+EX_R11(r13); 224 ld r10,_NIP(r1) 225 ld r11,_MSR(r1) 226 REST_GPR(0, r1) 227 REST_GPR(1, r1) 228 mtspr \srr0,r10 229 mtspr \srr1,r11 230 ld r10,\paca_ex+EX_R10(r13) 231 ld r11,\paca_ex+EX_R11(r13) 232 mfspr r13,\scratch 233.endm 234 235ret_from_crit_except: 236 ret_from_level SPRN_CSRR0 SPRN_CSRR1 PACA_EXCRIT SPRN_SPRG_CRIT_SCRATCH 237 rfci 238 239ret_from_mc_except: 240 ret_from_level SPRN_MCSRR0 SPRN_MCSRR1 PACA_EXMC SPRN_SPRG_MC_SCRATCH 241 rfmci 242 243/* Exception prolog code for all exceptions */ 244#define EXCEPTION_PROLOG(n, intnum, type, addition) \ 245 mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \ 246 mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \ 247 std r10,PACA_EX##type+EX_R10(r13); \ 248 std r11,PACA_EX##type+EX_R11(r13); \ 249 mfcr r10; /* save CR */ \ 250 mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \ 251 DO_KVM intnum,SPRN_##type##_SRR1; /* KVM hook */ \ 252 stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \ 253 addition; /* additional code for that exc. */ \ 254 std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \ 255 type##_SET_KSTACK; /* get special stack if necessary */\ 256 andi. r10,r11,MSR_PR; /* save stack pointer */ \ 257 beq 1f; /* branch around if supervisor */ \ 258 ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\ 2591: type##_BTB_FLUSH \ 260 cmpdi cr1,r1,0; /* check if SP makes sense */ \ 261 bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \ 262 mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */ 263 264/* Exception type-specific macros */ 265#define GEN_SET_KSTACK \ 266 subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ 267#define SPRN_GEN_SRR0 SPRN_SRR0 268#define SPRN_GEN_SRR1 SPRN_SRR1 269 270#define GDBELL_SET_KSTACK GEN_SET_KSTACK 271#define SPRN_GDBELL_SRR0 SPRN_GSRR0 272#define SPRN_GDBELL_SRR1 SPRN_GSRR1 273 274#define CRIT_SET_KSTACK \ 275 ld r1,PACA_CRIT_STACK(r13); \ 276 subi r1,r1,SPECIAL_EXC_FRAME_SIZE 277#define SPRN_CRIT_SRR0 SPRN_CSRR0 278#define SPRN_CRIT_SRR1 SPRN_CSRR1 279 280#define DBG_SET_KSTACK \ 281 ld r1,PACA_DBG_STACK(r13); \ 282 subi r1,r1,SPECIAL_EXC_FRAME_SIZE 283#define SPRN_DBG_SRR0 SPRN_DSRR0 284#define SPRN_DBG_SRR1 SPRN_DSRR1 285 286#define MC_SET_KSTACK \ 287 ld r1,PACA_MC_STACK(r13); \ 288 subi r1,r1,SPECIAL_EXC_FRAME_SIZE 289#define SPRN_MC_SRR0 SPRN_MCSRR0 290#define SPRN_MC_SRR1 SPRN_MCSRR1 291 292#define GEN_BTB_FLUSH \ 293 START_BTB_FLUSH_SECTION \ 294 beq 1f; \ 295 BTB_FLUSH(r10) \ 296 1: \ 297 END_BTB_FLUSH_SECTION 298 299#define CRIT_BTB_FLUSH \ 300 START_BTB_FLUSH_SECTION \ 301 BTB_FLUSH(r10) \ 302 END_BTB_FLUSH_SECTION 303 304#define DBG_BTB_FLUSH CRIT_BTB_FLUSH 305#define MC_BTB_FLUSH CRIT_BTB_FLUSH 306#define GDBELL_BTB_FLUSH GEN_BTB_FLUSH 307 308#define NORMAL_EXCEPTION_PROLOG(n, intnum, addition) \ 309 EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n)) 310 311#define CRIT_EXCEPTION_PROLOG(n, intnum, addition) \ 312 EXCEPTION_PROLOG(n, intnum, CRIT, addition##_CRIT(n)) 313 314#define DBG_EXCEPTION_PROLOG(n, intnum, addition) \ 315 EXCEPTION_PROLOG(n, intnum, DBG, addition##_DBG(n)) 316 317#define MC_EXCEPTION_PROLOG(n, intnum, addition) \ 318 EXCEPTION_PROLOG(n, intnum, MC, addition##_MC(n)) 319 320#define GDBELL_EXCEPTION_PROLOG(n, intnum, addition) \ 321 EXCEPTION_PROLOG(n, intnum, GDBELL, addition##_GDBELL(n)) 322 323/* Variants of the "addition" argument for the prolog 324 */ 325#define PROLOG_ADDITION_NONE_GEN(n) 326#define PROLOG_ADDITION_NONE_GDBELL(n) 327#define PROLOG_ADDITION_NONE_CRIT(n) 328#define PROLOG_ADDITION_NONE_DBG(n) 329#define PROLOG_ADDITION_NONE_MC(n) 330 331#define PROLOG_ADDITION_MASKABLE_GEN(n) \ 332 lbz r10,PACAIRQSOFTMASK(r13); /* are irqs soft-masked? */ \ 333 andi. r10,r10,IRQS_DISABLED; /* yes -> go out of line */ \ 334 bne masked_interrupt_book3e_##n 335 336/* 337 * Additional regs must be re-loaded from paca before EXCEPTION_COMMON* is 338 * called, because that does SAVE_NVGPRS which must see the original register 339 * values, otherwise the scratch values might be restored when exiting the 340 * interrupt. 341 */ 342#define PROLOG_ADDITION_2REGS_GEN(n) \ 343 std r14,PACA_EXGEN+EX_R14(r13); \ 344 std r15,PACA_EXGEN+EX_R15(r13) 345 346#define PROLOG_ADDITION_1REG_GEN(n) \ 347 std r14,PACA_EXGEN+EX_R14(r13); 348 349#define PROLOG_ADDITION_2REGS_CRIT(n) \ 350 std r14,PACA_EXCRIT+EX_R14(r13); \ 351 std r15,PACA_EXCRIT+EX_R15(r13) 352 353#define PROLOG_ADDITION_2REGS_DBG(n) \ 354 std r14,PACA_EXDBG+EX_R14(r13); \ 355 std r15,PACA_EXDBG+EX_R15(r13) 356 357#define PROLOG_ADDITION_2REGS_MC(n) \ 358 std r14,PACA_EXMC+EX_R14(r13); \ 359 std r15,PACA_EXMC+EX_R15(r13) 360 361 362/* Core exception code for all exceptions except TLB misses. */ 363#define EXCEPTION_COMMON_LVL(n, scratch, excf) \ 364exc_##n##_common: \ 365 SAVE_GPR(0, r1); /* save r0 in stackframe */ \ 366 SAVE_GPRS(2, 9, r1); /* save r2 - r9 in stackframe */ \ 367 std r10,_NIP(r1); /* save SRR0 to stackframe */ \ 368 std r11,_MSR(r1); /* save SRR1 to stackframe */ \ 369 beq 2f; /* if from kernel mode */ \ 3702: ld r3,excf+EX_R10(r13); /* get back r10 */ \ 371 ld r4,excf+EX_R11(r13); /* get back r11 */ \ 372 mfspr r5,scratch; /* get back r13 */ \ 373 SAVE_GPR(12, r1); /* save r12 in stackframe */ \ 374 LOAD_PACA_TOC(); /* get kernel TOC into r2 */ \ 375 mflr r6; /* save LR in stackframe */ \ 376 mfctr r7; /* save CTR in stackframe */ \ 377 mfspr r8,SPRN_XER; /* save XER in stackframe */ \ 378 ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \ 379 lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \ 380 lbz r11,PACAIRQSOFTMASK(r13); /* get current IRQ softe */ \ 381 LOAD_REG_IMMEDIATE(r12, STACK_FRAME_REGS_MARKER); \ 382 ZEROIZE_GPR(0); \ 383 std r3,GPR10(r1); /* save r10 to stackframe */ \ 384 std r4,GPR11(r1); /* save r11 to stackframe */ \ 385 std r5,GPR13(r1); /* save it to stackframe */ \ 386 std r6,_LINK(r1); \ 387 std r7,_CTR(r1); \ 388 std r8,_XER(r1); \ 389 li r3,(n); /* regs.trap vector */ \ 390 std r9,0(r1); /* store stack frame back link */ \ 391 std r10,_CCR(r1); /* store orig CR in stackframe */ \ 392 std r9,GPR1(r1); /* store stack frame back link */ \ 393 std r11,SOFTE(r1); /* and save it to stackframe */ \ 394 std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ 395 std r3,_TRAP(r1); /* set trap number */ \ 396 std r0,RESULT(r1); /* clear regs->result */ \ 397 SAVE_NVGPRS(r1); 398 399#define EXCEPTION_COMMON(n) \ 400 EXCEPTION_COMMON_LVL(n, SPRN_SPRG_GEN_SCRATCH, PACA_EXGEN) 401#define EXCEPTION_COMMON_CRIT(n) \ 402 EXCEPTION_COMMON_LVL(n, SPRN_SPRG_CRIT_SCRATCH, PACA_EXCRIT) 403#define EXCEPTION_COMMON_MC(n) \ 404 EXCEPTION_COMMON_LVL(n, SPRN_SPRG_MC_SCRATCH, PACA_EXMC) 405#define EXCEPTION_COMMON_DBG(n) \ 406 EXCEPTION_COMMON_LVL(n, SPRN_SPRG_DBG_SCRATCH, PACA_EXDBG) 407 408/* XXX FIXME: Restore r14/r15 when necessary */ 409#define BAD_STACK_TRAMPOLINE(n) \ 410exc_##n##_bad_stack: \ 411 li r1,(n); /* get exception number */ \ 412 sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ 413 b bad_stack_book3e; /* bad stack error */ 414 415/* WARNING: If you change the layout of this stub, make sure you check 416 * the debug exception handler which handles single stepping 417 * into exceptions from userspace, and the MM code in 418 * arch/powerpc/mm/tlb_nohash.c which patches the branch here 419 * and would need to be updated if that branch is moved 420 */ 421#define EXCEPTION_STUB(loc, label) \ 422 . = interrupt_base_book3e + loc; \ 423 nop; /* To make debug interrupts happy */ \ 424 b exc_##label##_book3e; 425 426#define ACK_NONE(r) 427#define ACK_DEC(r) \ 428 lis r,TSR_DIS@h; \ 429 mtspr SPRN_TSR,r 430#define ACK_FIT(r) \ 431 lis r,TSR_FIS@h; \ 432 mtspr SPRN_TSR,r 433 434/* Used by asynchronous interrupt that may happen in the idle loop. 435 * 436 * This check if the thread was in the idle loop, and if yes, returns 437 * to the caller rather than the PC. This is to avoid a race if 438 * interrupts happen before the wait instruction. 439 */ 440#define CHECK_NAPPING() \ 441 ld r11, PACA_THREAD_INFO(r13); \ 442 ld r10,TI_LOCAL_FLAGS(r11); \ 443 andi. r9,r10,_TLF_NAPPING; \ 444 beq+ 1f; \ 445 ld r8,_LINK(r1); \ 446 rlwinm r7,r10,0,~_TLF_NAPPING; \ 447 std r8,_NIP(r1); \ 448 std r7,TI_LOCAL_FLAGS(r11); \ 4491: 450 451 452#define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr, ack) \ 453 START_EXCEPTION(label); \ 454 NORMAL_EXCEPTION_PROLOG(trapnum, intnum, PROLOG_ADDITION_MASKABLE)\ 455 EXCEPTION_COMMON(trapnum) \ 456 ack(r8); \ 457 CHECK_NAPPING(); \ 458 addi r3,r1,STACK_FRAME_OVERHEAD; \ 459 bl hdlr; \ 460 b interrupt_return 461 462/* 463 * And here we have the exception vectors ! 464 */ 465 466 .text 467 .balign 0x1000 468 .globl interrupt_base_book3e 469interrupt_base_book3e: /* fake trap */ 470 EXCEPTION_STUB(0x000, machine_check) 471 EXCEPTION_STUB(0x020, critical_input) /* 0x0100 */ 472 EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */ 473 EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */ 474 EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */ 475 EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */ 476 EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */ 477 EXCEPTION_STUB(0x0e0, program) /* 0x0700 */ 478 EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */ 479 EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */ 480 EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */ 481 EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */ 482 EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */ 483 EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ 484 EXCEPTION_STUB(0x1c0, data_tlb_miss) 485 EXCEPTION_STUB(0x1e0, instruction_tlb_miss) 486 EXCEPTION_STUB(0x200, altivec_unavailable) 487 EXCEPTION_STUB(0x220, altivec_assist) 488 EXCEPTION_STUB(0x260, perfmon) 489 EXCEPTION_STUB(0x280, doorbell) 490 EXCEPTION_STUB(0x2a0, doorbell_crit) 491 EXCEPTION_STUB(0x2c0, guest_doorbell) 492 EXCEPTION_STUB(0x2e0, guest_doorbell_crit) 493 EXCEPTION_STUB(0x300, hypercall) 494 EXCEPTION_STUB(0x320, ehpriv) 495 EXCEPTION_STUB(0x340, lrat_error) 496 497 .globl __end_interrupts 498__end_interrupts: 499 500/* Critical Input Interrupt */ 501 START_EXCEPTION(critical_input); 502 CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL, 503 PROLOG_ADDITION_NONE) 504 EXCEPTION_COMMON_CRIT(0x100) 505 bl special_reg_save 506 CHECK_NAPPING(); 507 addi r3,r1,STACK_FRAME_OVERHEAD 508 bl unknown_nmi_exception 509 b ret_from_crit_except 510 511/* Machine Check Interrupt */ 512 START_EXCEPTION(machine_check); 513 MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK, 514 PROLOG_ADDITION_NONE) 515 EXCEPTION_COMMON_MC(0x000) 516 bl special_reg_save 517 CHECK_NAPPING(); 518 addi r3,r1,STACK_FRAME_OVERHEAD 519 bl machine_check_exception 520 b ret_from_mc_except 521 522/* Data Storage Interrupt */ 523 START_EXCEPTION(data_storage) 524 NORMAL_EXCEPTION_PROLOG(0x300, BOOKE_INTERRUPT_DATA_STORAGE, 525 PROLOG_ADDITION_2REGS) 526 mfspr r14,SPRN_DEAR 527 mfspr r15,SPRN_ESR 528 std r14,_DEAR(r1) 529 std r15,_ESR(r1) 530 ld r14,PACA_EXGEN+EX_R14(r13) 531 ld r15,PACA_EXGEN+EX_R15(r13) 532 EXCEPTION_COMMON(0x300) 533 b storage_fault_common 534 535/* Instruction Storage Interrupt */ 536 START_EXCEPTION(instruction_storage); 537 NORMAL_EXCEPTION_PROLOG(0x400, BOOKE_INTERRUPT_INST_STORAGE, 538 PROLOG_ADDITION_2REGS) 539 li r15,0 540 mr r14,r10 541 std r14,_DEAR(r1) 542 std r15,_ESR(r1) 543 ld r14,PACA_EXGEN+EX_R14(r13) 544 ld r15,PACA_EXGEN+EX_R15(r13) 545 EXCEPTION_COMMON(0x400) 546 b storage_fault_common 547 548/* External Input Interrupt */ 549 MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL, 550 external_input, do_IRQ, ACK_NONE) 551 552/* Alignment */ 553 START_EXCEPTION(alignment); 554 NORMAL_EXCEPTION_PROLOG(0x600, BOOKE_INTERRUPT_ALIGNMENT, 555 PROLOG_ADDITION_2REGS) 556 mfspr r14,SPRN_DEAR 557 mfspr r15,SPRN_ESR 558 std r14,_DEAR(r1) 559 std r15,_ESR(r1) 560 ld r14,PACA_EXGEN+EX_R14(r13) 561 ld r15,PACA_EXGEN+EX_R15(r13) 562 EXCEPTION_COMMON(0x600) 563 b alignment_more /* no room, go out of line */ 564 565/* Program Interrupt */ 566 START_EXCEPTION(program); 567 NORMAL_EXCEPTION_PROLOG(0x700, BOOKE_INTERRUPT_PROGRAM, 568 PROLOG_ADDITION_1REG) 569 mfspr r14,SPRN_ESR 570 std r14,_ESR(r1) 571 ld r14,PACA_EXGEN+EX_R14(r13) 572 EXCEPTION_COMMON(0x700) 573 addi r3,r1,STACK_FRAME_OVERHEAD 574 bl program_check_exception 575 REST_NVGPRS(r1) 576 b interrupt_return 577 578/* Floating Point Unavailable Interrupt */ 579 START_EXCEPTION(fp_unavailable); 580 NORMAL_EXCEPTION_PROLOG(0x800, BOOKE_INTERRUPT_FP_UNAVAIL, 581 PROLOG_ADDITION_NONE) 582 /* we can probably do a shorter exception entry for that one... */ 583 EXCEPTION_COMMON(0x800) 584 ld r12,_MSR(r1) 585 andi. r0,r12,MSR_PR; 586 beq- 1f 587 bl load_up_fpu 588 b fast_interrupt_return 5891: addi r3,r1,STACK_FRAME_OVERHEAD 590 bl kernel_fp_unavailable_exception 591 b interrupt_return 592 593/* Altivec Unavailable Interrupt */ 594 START_EXCEPTION(altivec_unavailable); 595 NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_ALTIVEC_UNAVAIL, 596 PROLOG_ADDITION_NONE) 597 /* we can probably do a shorter exception entry for that one... */ 598 EXCEPTION_COMMON(0x200) 599#ifdef CONFIG_ALTIVEC 600BEGIN_FTR_SECTION 601 ld r12,_MSR(r1) 602 andi. r0,r12,MSR_PR; 603 beq- 1f 604 bl load_up_altivec 605 b fast_interrupt_return 6061: 607END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) 608#endif 609 addi r3,r1,STACK_FRAME_OVERHEAD 610 bl altivec_unavailable_exception 611 b interrupt_return 612 613/* AltiVec Assist */ 614 START_EXCEPTION(altivec_assist); 615 NORMAL_EXCEPTION_PROLOG(0x220, 616 BOOKE_INTERRUPT_ALTIVEC_ASSIST, 617 PROLOG_ADDITION_NONE) 618 EXCEPTION_COMMON(0x220) 619 addi r3,r1,STACK_FRAME_OVERHEAD 620#ifdef CONFIG_ALTIVEC 621BEGIN_FTR_SECTION 622 bl altivec_assist_exception 623END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) 624 REST_NVGPRS(r1) 625#else 626 bl unknown_exception 627#endif 628 b interrupt_return 629 630 631/* Decrementer Interrupt */ 632 MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER, 633 decrementer, timer_interrupt, ACK_DEC) 634 635/* Fixed Interval Timer Interrupt */ 636 MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT, 637 fixed_interval, unknown_exception, ACK_FIT) 638 639/* Watchdog Timer Interrupt */ 640 START_EXCEPTION(watchdog); 641 CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG, 642 PROLOG_ADDITION_NONE) 643 EXCEPTION_COMMON_CRIT(0x9f0) 644 bl special_reg_save 645 CHECK_NAPPING(); 646 addi r3,r1,STACK_FRAME_OVERHEAD 647#ifdef CONFIG_BOOKE_WDT 648 bl WatchdogException 649#else 650 bl unknown_nmi_exception 651#endif 652 b ret_from_crit_except 653 654/* System Call Interrupt */ 655 START_EXCEPTION(system_call) 656 mr r9,r13 /* keep a copy of userland r13 */ 657 mfspr r11,SPRN_SRR0 /* get return address */ 658 mfspr r12,SPRN_SRR1 /* get previous MSR */ 659 mfspr r13,SPRN_SPRG_PACA /* get our PACA */ 660 b system_call_common 661 662/* Auxiliary Processor Unavailable Interrupt */ 663 START_EXCEPTION(ap_unavailable); 664 NORMAL_EXCEPTION_PROLOG(0xf20, BOOKE_INTERRUPT_AP_UNAVAIL, 665 PROLOG_ADDITION_NONE) 666 EXCEPTION_COMMON(0xf20) 667 addi r3,r1,STACK_FRAME_OVERHEAD 668 bl unknown_exception 669 b interrupt_return 670 671/* Debug exception as a critical interrupt*/ 672 START_EXCEPTION(debug_crit); 673 CRIT_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG, 674 PROLOG_ADDITION_2REGS) 675 676 /* 677 * If there is a single step or branch-taken exception in an 678 * exception entry sequence, it was probably meant to apply to 679 * the code where the exception occurred (since exception entry 680 * doesn't turn off DE automatically). We simulate the effect 681 * of turning off DE on entry to an exception handler by turning 682 * off DE in the CSRR1 value and clearing the debug status. 683 */ 684 685 mfspr r14,SPRN_DBSR /* check single-step/branch taken */ 686 andis. r15,r14,(DBSR_IC|DBSR_BT)@h 687 beq+ 1f 688 689#ifdef CONFIG_RELOCATABLE 690 __LOAD_PACA_TOC(r15) 691 LOAD_REG_ADDR_ALTTOC(r14, r15, interrupt_base_book3e) 692 LOAD_REG_ADDR_ALTTOC(r15, r15, __end_interrupts) 693 cmpld cr0,r10,r14 694 cmpld cr1,r10,r15 695#else 696 LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e) 697 cmpld cr0, r10, r14 698 LOAD_REG_IMMEDIATE_SYM(r14, r15, __end_interrupts) 699 cmpld cr1, r10, r14 700#endif 701 blt+ cr0,1f 702 bge+ cr1,1f 703 704 /* here it looks like we got an inappropriate debug exception. */ 705 lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ 706 rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ 707 mtspr SPRN_DBSR,r14 708 mtspr SPRN_CSRR1,r11 709 lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */ 710 ld r1,PACA_EXCRIT+EX_R1(r13) 711 ld r14,PACA_EXCRIT+EX_R14(r13) 712 ld r15,PACA_EXCRIT+EX_R15(r13) 713 mtcr r10 714 ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */ 715 ld r11,PACA_EXCRIT+EX_R11(r13) 716 mfspr r13,SPRN_SPRG_CRIT_SCRATCH 717 rfci 718 719 /* Normal debug exception */ 720 /* XXX We only handle coming from userspace for now since we can't 721 * quite save properly an interrupted kernel state yet 722 */ 7231: andi. r14,r11,MSR_PR; /* check for userspace again */ 724 beq kernel_dbg_exc; /* if from kernel mode */ 725 726 /* Now we mash up things to make it look like we are coming on a 727 * normal exception 728 */ 729 mfspr r14,SPRN_DBSR 730 std r14,_DSISR(r1) 731 ld r14,PACA_EXCRIT+EX_R14(r13) 732 ld r15,PACA_EXCRIT+EX_R15(r13) 733 EXCEPTION_COMMON_CRIT(0xd00) 734 addi r3,r1,STACK_FRAME_OVERHEAD 735 bl DebugException 736 REST_NVGPRS(r1) 737 b interrupt_return 738 739kernel_dbg_exc: 740 b . /* NYI */ 741 742/* Debug exception as a debug interrupt*/ 743 START_EXCEPTION(debug_debug); 744 DBG_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG, 745 PROLOG_ADDITION_2REGS) 746 747 /* 748 * If there is a single step or branch-taken exception in an 749 * exception entry sequence, it was probably meant to apply to 750 * the code where the exception occurred (since exception entry 751 * doesn't turn off DE automatically). We simulate the effect 752 * of turning off DE on entry to an exception handler by turning 753 * off DE in the DSRR1 value and clearing the debug status. 754 */ 755 756 mfspr r14,SPRN_DBSR /* check single-step/branch taken */ 757 andis. r15,r14,(DBSR_IC|DBSR_BT)@h 758 beq+ 1f 759 760#ifdef CONFIG_RELOCATABLE 761 __LOAD_PACA_TOC(r15) 762 LOAD_REG_ADDR_ALTTOC(r14, r15, interrupt_base_book3e) 763 LOAD_REG_ADDR_ALTTOC(r15, r15, __end_interrupts) 764 cmpld cr0,r10,r14 765 cmpld cr1,r10,r15 766#else 767 LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e) 768 cmpld cr0, r10, r14 769 LOAD_REG_IMMEDIATE_SYM(r14, r15,__end_interrupts) 770 cmpld cr1, r10, r14 771#endif 772 blt+ cr0,1f 773 bge+ cr1,1f 774 775 /* here it looks like we got an inappropriate debug exception. */ 776 lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ 777 rlwinm r11,r11,0,~MSR_DE /* clear DE in the DSRR1 value */ 778 mtspr SPRN_DBSR,r14 779 mtspr SPRN_DSRR1,r11 780 lwz r10,PACA_EXDBG+EX_CR(r13) /* restore registers */ 781 ld r1,PACA_EXDBG+EX_R1(r13) 782 ld r14,PACA_EXDBG+EX_R14(r13) 783 ld r15,PACA_EXDBG+EX_R15(r13) 784 mtcr r10 785 ld r10,PACA_EXDBG+EX_R10(r13) /* restore registers */ 786 ld r11,PACA_EXDBG+EX_R11(r13) 787 mfspr r13,SPRN_SPRG_DBG_SCRATCH 788 rfdi 789 790 /* Normal debug exception */ 791 /* XXX We only handle coming from userspace for now since we can't 792 * quite save properly an interrupted kernel state yet 793 */ 7941: andi. r14,r11,MSR_PR; /* check for userspace again */ 795 beq kernel_dbg_exc; /* if from kernel mode */ 796 797 /* Now we mash up things to make it look like we are coming on a 798 * normal exception 799 */ 800 mfspr r14,SPRN_DBSR 801 std r14,_DSISR(r1) 802 ld r14,PACA_EXDBG+EX_R14(r13) 803 ld r15,PACA_EXDBG+EX_R15(r13) 804 EXCEPTION_COMMON_DBG(0xd08) 805 addi r3,r1,STACK_FRAME_OVERHEAD 806 bl DebugException 807 REST_NVGPRS(r1) 808 b interrupt_return 809 810 START_EXCEPTION(perfmon); 811 NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR, 812 PROLOG_ADDITION_NONE) 813 EXCEPTION_COMMON(0x260) 814 CHECK_NAPPING() 815 addi r3,r1,STACK_FRAME_OVERHEAD 816 bl performance_monitor_exception 817 b interrupt_return 818 819/* Doorbell interrupt */ 820 MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL, 821 doorbell, doorbell_exception, ACK_NONE) 822 823/* Doorbell critical Interrupt */ 824 START_EXCEPTION(doorbell_crit); 825 CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL, 826 PROLOG_ADDITION_NONE) 827 EXCEPTION_COMMON_CRIT(0x2a0) 828 bl special_reg_save 829 CHECK_NAPPING(); 830 addi r3,r1,STACK_FRAME_OVERHEAD 831 bl unknown_nmi_exception 832 b ret_from_crit_except 833 834/* 835 * Guest doorbell interrupt 836 * This general exception use GSRRx save/restore registers 837 */ 838 START_EXCEPTION(guest_doorbell); 839 GDBELL_EXCEPTION_PROLOG(0x2c0, BOOKE_INTERRUPT_GUEST_DBELL, 840 PROLOG_ADDITION_NONE) 841 EXCEPTION_COMMON(0x2c0) 842 addi r3,r1,STACK_FRAME_OVERHEAD 843 bl unknown_exception 844 b interrupt_return 845 846/* Guest Doorbell critical Interrupt */ 847 START_EXCEPTION(guest_doorbell_crit); 848 CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT, 849 PROLOG_ADDITION_NONE) 850 EXCEPTION_COMMON_CRIT(0x2e0) 851 bl special_reg_save 852 CHECK_NAPPING(); 853 addi r3,r1,STACK_FRAME_OVERHEAD 854 bl unknown_nmi_exception 855 b ret_from_crit_except 856 857/* Hypervisor call */ 858 START_EXCEPTION(hypercall); 859 NORMAL_EXCEPTION_PROLOG(0x310, BOOKE_INTERRUPT_HV_SYSCALL, 860 PROLOG_ADDITION_NONE) 861 EXCEPTION_COMMON(0x310) 862 addi r3,r1,STACK_FRAME_OVERHEAD 863 bl unknown_exception 864 b interrupt_return 865 866/* Embedded Hypervisor priviledged */ 867 START_EXCEPTION(ehpriv); 868 NORMAL_EXCEPTION_PROLOG(0x320, BOOKE_INTERRUPT_HV_PRIV, 869 PROLOG_ADDITION_NONE) 870 EXCEPTION_COMMON(0x320) 871 addi r3,r1,STACK_FRAME_OVERHEAD 872 bl unknown_exception 873 b interrupt_return 874 875/* LRAT Error interrupt */ 876 START_EXCEPTION(lrat_error); 877 NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR, 878 PROLOG_ADDITION_NONE) 879 EXCEPTION_COMMON(0x340) 880 addi r3,r1,STACK_FRAME_OVERHEAD 881 bl unknown_exception 882 b interrupt_return 883 884.macro SEARCH_RESTART_TABLE 885#ifdef CONFIG_RELOCATABLE 886 __LOAD_PACA_TOC(r11) 887 LOAD_REG_ADDR_ALTTOC(r14, r11, __start___restart_table) 888 LOAD_REG_ADDR_ALTTOC(r15, r11, __stop___restart_table) 889#else 890 LOAD_REG_IMMEDIATE_SYM(r14, r11, __start___restart_table) 891 LOAD_REG_IMMEDIATE_SYM(r15, r11, __stop___restart_table) 892#endif 893300: 894 cmpd r14,r15 895 beq 302f 896 ld r11,0(r14) 897 cmpld r10,r11 898 blt 301f 899 ld r11,8(r14) 900 cmpld r10,r11 901 bge 301f 902 ld r11,16(r14) 903 b 303f 904301: 905 addi r14,r14,24 906 b 300b 907302: 908 li r11,0 909303: 910.endm 911 912/* 913 * An interrupt came in while soft-disabled; We mark paca->irq_happened 914 * accordingly and if the interrupt is level sensitive, we hard disable 915 * hard disable (full_mask) corresponds to PACA_IRQ_MUST_HARD_MASK, so 916 * keep these in synch. 917 */ 918 919.macro masked_interrupt_book3e paca_irq full_mask 920 std r14,PACA_EXGEN+EX_R14(r13) 921 std r15,PACA_EXGEN+EX_R15(r13) 922 923 lbz r10,PACAIRQHAPPENED(r13) 924 .if \full_mask == 1 925 ori r10,r10,\paca_irq | PACA_IRQ_HARD_DIS 926 .else 927 ori r10,r10,\paca_irq 928 .endif 929 stb r10,PACAIRQHAPPENED(r13) 930 931 .if \full_mask == 1 932 xori r11,r11,MSR_EE /* clear MSR_EE */ 933 mtspr SPRN_SRR1,r11 934 .endif 935 936 mfspr r10,SPRN_SRR0 937 SEARCH_RESTART_TABLE 938 cmpdi r11,0 939 beq 1f 940 mtspr SPRN_SRR0,r11 /* return to restart address */ 9411: 942 943 lwz r11,PACA_EXGEN+EX_CR(r13) 944 mtcr r11 945 ld r10,PACA_EXGEN+EX_R10(r13) 946 ld r11,PACA_EXGEN+EX_R11(r13) 947 ld r14,PACA_EXGEN+EX_R14(r13) 948 ld r15,PACA_EXGEN+EX_R15(r13) 949 mfspr r13,SPRN_SPRG_GEN_SCRATCH 950 rfi 951 b . 952.endm 953 954masked_interrupt_book3e_0x500: 955 masked_interrupt_book3e PACA_IRQ_EE 1 956 957masked_interrupt_book3e_0x900: 958 ACK_DEC(r10); 959 masked_interrupt_book3e PACA_IRQ_DEC 0 960 961masked_interrupt_book3e_0x980: 962 ACK_FIT(r10); 963 masked_interrupt_book3e PACA_IRQ_DEC 0 964 965masked_interrupt_book3e_0x280: 966masked_interrupt_book3e_0x2c0: 967 masked_interrupt_book3e PACA_IRQ_DBELL 0 968 969/* 970 * This is called from 0x300 and 0x400 handlers after the prologs with 971 * r14 and r15 containing the fault address and error code, with the 972 * original values stashed away in the PACA 973 */ 974storage_fault_common: 975 addi r3,r1,STACK_FRAME_OVERHEAD 976 bl do_page_fault 977 b interrupt_return 978 979/* 980 * Alignment exception doesn't fit entirely in the 0x100 bytes so it 981 * continues here. 982 */ 983alignment_more: 984 addi r3,r1,STACK_FRAME_OVERHEAD 985 bl alignment_exception 986 REST_NVGPRS(r1) 987 b interrupt_return 988 989/* 990 * Trampolines used when spotting a bad kernel stack pointer in 991 * the exception entry code. 992 * 993 * TODO: move some bits like SRR0 read to trampoline, pass PACA 994 * index around, etc... to handle crit & mcheck 995 */ 996BAD_STACK_TRAMPOLINE(0x000) 997BAD_STACK_TRAMPOLINE(0x100) 998BAD_STACK_TRAMPOLINE(0x200) 999BAD_STACK_TRAMPOLINE(0x220) 1000BAD_STACK_TRAMPOLINE(0x260) 1001BAD_STACK_TRAMPOLINE(0x280) 1002BAD_STACK_TRAMPOLINE(0x2a0) 1003BAD_STACK_TRAMPOLINE(0x2c0) 1004BAD_STACK_TRAMPOLINE(0x2e0) 1005BAD_STACK_TRAMPOLINE(0x300) 1006BAD_STACK_TRAMPOLINE(0x310) 1007BAD_STACK_TRAMPOLINE(0x320) 1008BAD_STACK_TRAMPOLINE(0x340) 1009BAD_STACK_TRAMPOLINE(0x400) 1010BAD_STACK_TRAMPOLINE(0x500) 1011BAD_STACK_TRAMPOLINE(0x600) 1012BAD_STACK_TRAMPOLINE(0x700) 1013BAD_STACK_TRAMPOLINE(0x800) 1014BAD_STACK_TRAMPOLINE(0x900) 1015BAD_STACK_TRAMPOLINE(0x980) 1016BAD_STACK_TRAMPOLINE(0x9f0) 1017BAD_STACK_TRAMPOLINE(0xa00) 1018BAD_STACK_TRAMPOLINE(0xb00) 1019BAD_STACK_TRAMPOLINE(0xc00) 1020BAD_STACK_TRAMPOLINE(0xd00) 1021BAD_STACK_TRAMPOLINE(0xd08) 1022BAD_STACK_TRAMPOLINE(0xe00) 1023BAD_STACK_TRAMPOLINE(0xf00) 1024BAD_STACK_TRAMPOLINE(0xf20) 1025 1026 .globl bad_stack_book3e 1027bad_stack_book3e: 1028 /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ 1029 mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */ 1030 ld r1,PACAEMERGSP(r13) 1031 subi r1,r1,64+INT_FRAME_SIZE 1032 std r10,_NIP(r1) 1033 std r11,_MSR(r1) 1034 ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */ 1035 lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */ 1036 std r10,GPR1(r1) 1037 std r11,_CCR(r1) 1038 mfspr r10,SPRN_DEAR 1039 mfspr r11,SPRN_ESR 1040 std r10,_DEAR(r1) 1041 std r11,_ESR(r1) 1042 SAVE_GPR(0, r1); /* save r0 in stackframe */ \ 1043 SAVE_GPRS(2, 9, r1); /* save r2 - r9 in stackframe */ \ 1044 ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \ 1045 ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \ 1046 mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \ 1047 std r3,GPR10(r1); /* save r10 to stackframe */ \ 1048 std r4,GPR11(r1); /* save r11 to stackframe */ \ 1049 SAVE_GPR(12, r1); /* save r12 in stackframe */ \ 1050 std r5,GPR13(r1); /* save it to stackframe */ \ 1051 mflr r10 1052 mfctr r11 1053 mfxer r12 1054 std r10,_LINK(r1) 1055 std r11,_CTR(r1) 1056 std r12,_XER(r1) 1057 SAVE_NVGPRS(r1) 1058 lhz r12,PACA_TRAP_SAVE(r13) 1059 std r12,_TRAP(r1) 1060 addi r11,r1,INT_FRAME_SIZE 1061 std r11,0(r1) 1062 ZEROIZE_GPR(12) 1063 std r12,0(r11) 1064 LOAD_PACA_TOC() 10651: addi r3,r1,STACK_FRAME_OVERHEAD 1066 bl kernel_bad_stack 1067 b 1b 1068 1069/* 1070 * Setup the initial TLB for a core. This current implementation 1071 * assume that whatever we are running off will not conflict with 1072 * the new mapping at PAGE_OFFSET. 1073 */ 1074_GLOBAL(initial_tlb_book3e) 1075 1076 /* Look for the first TLB with IPROT set */ 1077 mfspr r4,SPRN_TLB0CFG 1078 andi. r3,r4,TLBnCFG_IPROT 1079 lis r3,MAS0_TLBSEL(0)@h 1080 bne found_iprot 1081 1082 mfspr r4,SPRN_TLB1CFG 1083 andi. r3,r4,TLBnCFG_IPROT 1084 lis r3,MAS0_TLBSEL(1)@h 1085 bne found_iprot 1086 1087 mfspr r4,SPRN_TLB2CFG 1088 andi. r3,r4,TLBnCFG_IPROT 1089 lis r3,MAS0_TLBSEL(2)@h 1090 bne found_iprot 1091 1092 lis r3,MAS0_TLBSEL(3)@h 1093 mfspr r4,SPRN_TLB3CFG 1094 /* fall through */ 1095 1096found_iprot: 1097 andi. r5,r4,TLBnCFG_HES 1098 bne have_hes 1099 1100 mflr r8 /* save LR */ 1101/* 1. Find the index of the entry we're executing in 1102 * 1103 * r3 = MAS0_TLBSEL (for the iprot array) 1104 * r4 = SPRN_TLBnCFG 1105 */ 1106 bcl 20,31,$+4 /* Find our address */ 1107invstr: mflr r6 /* Make it accessible */ 1108 mfmsr r7 1109 rlwinm r5,r7,27,31,31 /* extract MSR[IS] */ 1110 mfspr r7,SPRN_PID 1111 slwi r7,r7,16 1112 or r7,r7,r5 1113 mtspr SPRN_MAS6,r7 1114 tlbsx 0,r6 /* search MSR[IS], SPID=PID */ 1115 1116 mfspr r3,SPRN_MAS0 1117 rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */ 1118 1119 mfspr r7,SPRN_MAS1 /* Insure IPROT set */ 1120 oris r7,r7,MAS1_IPROT@h 1121 mtspr SPRN_MAS1,r7 1122 tlbwe 1123 1124/* 2. Invalidate all entries except the entry we're executing in 1125 * 1126 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in 1127 * r4 = SPRN_TLBnCFG 1128 * r5 = ESEL of entry we are running in 1129 */ 1130 andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */ 1131 li r6,0 /* Set Entry counter to 0 */ 11321: mr r7,r3 /* Set MAS0(TLBSEL) */ 1133 rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ 1134 mtspr SPRN_MAS0,r7 1135 tlbre 1136 mfspr r7,SPRN_MAS1 1137 rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ 1138 cmpw r5,r6 1139 beq skpinv /* Dont update the current execution TLB */ 1140 mtspr SPRN_MAS1,r7 1141 tlbwe 1142 isync 1143skpinv: addi r6,r6,1 /* Increment */ 1144 cmpw r6,r4 /* Are we done? */ 1145 bne 1b /* If not, repeat */ 1146 1147 /* Invalidate all TLBs */ 1148 PPC_TLBILX_ALL(0,R0) 1149 sync 1150 isync 1151 1152/* 3. Setup a temp mapping and jump to it 1153 * 1154 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in 1155 * r5 = ESEL of entry we are running in 1156 */ 1157 andi. r7,r5,0x1 /* Find an entry not used and is non-zero */ 1158 addi r7,r7,0x1 1159 mr r4,r3 /* Set MAS0(TLBSEL) = 1 */ 1160 mtspr SPRN_MAS0,r4 1161 tlbre 1162 1163 rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */ 1164 mtspr SPRN_MAS0,r4 1165 1166 mfspr r7,SPRN_MAS1 1167 xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */ 1168 mtspr SPRN_MAS1,r6 1169 1170 tlbwe 1171 1172 mfmsr r6 1173 xori r6,r6,MSR_IS 1174 mtspr SPRN_SRR1,r6 1175 bcl 20,31,$+4 /* Find our address */ 11761: mflr r6 1177 addi r6,r6,(2f - 1b) 1178 mtspr SPRN_SRR0,r6 1179 rfi 11802: 1181 1182/* 4. Clear out PIDs & Search info 1183 * 1184 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in 1185 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping 1186 * r5 = MAS3 1187 */ 1188 li r6,0 1189 mtspr SPRN_MAS6,r6 1190 mtspr SPRN_PID,r6 1191 1192/* 5. Invalidate mapping we started in 1193 * 1194 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in 1195 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping 1196 * r5 = MAS3 1197 */ 1198 mtspr SPRN_MAS0,r3 1199 tlbre 1200 mfspr r6,SPRN_MAS1 1201 rlwinm r6,r6,0,2,31 /* clear IPROT and VALID */ 1202 mtspr SPRN_MAS1,r6 1203 tlbwe 1204 sync 1205 isync 1206 1207/* 6. Setup KERNELBASE mapping in TLB[0] 1208 * 1209 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in 1210 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping 1211 * r5 = MAS3 1212 */ 1213 rlwinm r3,r3,0,16,3 /* clear ESEL */ 1214 mtspr SPRN_MAS0,r3 1215 lis r6,(MAS1_VALID|MAS1_IPROT)@h 1216 ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l 1217 mtspr SPRN_MAS1,r6 1218 1219 LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | MAS2_M_IF_NEEDED) 1220 mtspr SPRN_MAS2,r6 1221 1222 rlwinm r5,r5,0,0,25 1223 ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX 1224 mtspr SPRN_MAS3,r5 1225 li r5,-1 1226 rlwinm r5,r5,0,0,25 1227 1228 tlbwe 1229 1230/* 7. Jump to KERNELBASE mapping 1231 * 1232 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping 1233 */ 1234 /* Now we branch the new virtual address mapped by this entry */ 1235 bcl 20,31,$+4 /* Find our address */ 12361: mflr r6 1237 addi r6,r6,(2f - 1b) 1238 tovirt(r6,r6) 1239 lis r7,MSR_KERNEL@h 1240 ori r7,r7,MSR_KERNEL@l 1241 mtspr SPRN_SRR0,r6 1242 mtspr SPRN_SRR1,r7 1243 rfi /* start execution out of TLB1[0] entry */ 12442: 1245 1246/* 8. Clear out the temp mapping 1247 * 1248 * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in 1249 */ 1250 mtspr SPRN_MAS0,r4 1251 tlbre 1252 mfspr r5,SPRN_MAS1 1253 rlwinm r5,r5,0,2,31 /* clear IPROT and VALID */ 1254 mtspr SPRN_MAS1,r5 1255 tlbwe 1256 sync 1257 isync 1258 1259 /* We translate LR and return */ 1260 tovirt(r8,r8) 1261 mtlr r8 1262 blr 1263 1264have_hes: 1265 /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the 1266 * kernel linear mapping. We also set MAS8 once for all here though 1267 * that will have to be made dependent on whether we are running under 1268 * a hypervisor I suppose. 1269 */ 1270 1271 /* BEWARE, MAGIC 1272 * This code is called as an ordinary function on the boot CPU. But to 1273 * avoid duplication, this code is also used in SCOM bringup of 1274 * secondary CPUs. We read the code between the initial_tlb_code_start 1275 * and initial_tlb_code_end labels one instruction at a time and RAM it 1276 * into the new core via SCOM. That doesn't process branches, so there 1277 * must be none between those two labels. It also means if this code 1278 * ever takes any parameters, the SCOM code must also be updated to 1279 * provide them. 1280 */ 1281 .globl a2_tlbinit_code_start 1282a2_tlbinit_code_start: 1283 1284 ori r11,r3,MAS0_WQ_ALLWAYS 1285 oris r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */ 1286 mtspr SPRN_MAS0,r11 1287 lis r3,(MAS1_VALID | MAS1_IPROT)@h 1288 ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT 1289 mtspr SPRN_MAS1,r3 1290 LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M) 1291 mtspr SPRN_MAS2,r3 1292 li r3,MAS3_SR | MAS3_SW | MAS3_SX 1293 mtspr SPRN_MAS7_MAS3,r3 1294 li r3,0 1295 mtspr SPRN_MAS8,r3 1296 1297 /* Write the TLB entry */ 1298 tlbwe 1299 1300 .globl a2_tlbinit_after_linear_map 1301a2_tlbinit_after_linear_map: 1302 1303 /* Now we branch the new virtual address mapped by this entry */ 1304#ifdef CONFIG_RELOCATABLE 1305 __LOAD_PACA_TOC(r5) 1306 LOAD_REG_ADDR_ALTTOC(r3, r5, 1f) 1307#else 1308 LOAD_REG_IMMEDIATE_SYM(r3, r5, 1f) 1309#endif 1310 mtctr r3 1311 bctr 1312 13131: /* We are now running at PAGE_OFFSET, clean the TLB of everything 1314 * else (including IPROTed things left by firmware) 1315 * r4 = TLBnCFG 1316 * r3 = current address (more or less) 1317 */ 1318 1319 li r5,0 1320 mtspr SPRN_MAS6,r5 1321 tlbsx 0,r3 1322 1323 rlwinm r9,r4,0,TLBnCFG_N_ENTRY 1324 rlwinm r10,r4,8,0xff 1325 addi r10,r10,-1 /* Get inner loop mask */ 1326 1327 li r3,1 1328 1329 mfspr r5,SPRN_MAS1 1330 rlwinm r5,r5,0,(~(MAS1_VALID|MAS1_IPROT)) 1331 1332 mfspr r6,SPRN_MAS2 1333 rldicr r6,r6,0,51 /* Extract EPN */ 1334 1335 mfspr r7,SPRN_MAS0 1336 rlwinm r7,r7,0,0xffff0fff /* Clear HES and WQ */ 1337 1338 rlwinm r8,r7,16,0xfff /* Extract ESEL */ 1339 13402: add r4,r3,r8 1341 and r4,r4,r10 1342 1343 rlwimi r7,r4,16,MAS0_ESEL_MASK 1344 1345 mtspr SPRN_MAS0,r7 1346 mtspr SPRN_MAS1,r5 1347 mtspr SPRN_MAS2,r6 1348 tlbwe 1349 1350 addi r3,r3,1 1351 and. r4,r3,r10 1352 1353 bne 3f 1354 addis r6,r6,(1<<30)@h 13553: 1356 cmpw r3,r9 1357 blt 2b 1358 1359 .globl a2_tlbinit_after_iprot_flush 1360a2_tlbinit_after_iprot_flush: 1361 1362 PPC_TLBILX(0,0,R0) 1363 sync 1364 isync 1365 1366 .globl a2_tlbinit_code_end 1367a2_tlbinit_code_end: 1368 1369 /* We translate LR and return */ 1370 mflr r3 1371 tovirt(r3,r3) 1372 mtlr r3 1373 blr 1374 1375/* 1376 * Main entry (boot CPU, thread 0) 1377 * 1378 * We enter here from head_64.S, possibly after the prom_init trampoline 1379 * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits 1380 * mode. Anything else is as it was left by the bootloader 1381 * 1382 * Initial requirements of this port: 1383 * 1384 * - Kernel loaded at 0 physical 1385 * - A good lump of memory mapped 0:0 by UTLB entry 0 1386 * - MSR:IS & MSR:DS set to 0 1387 * 1388 * Note that some of the above requirements will be relaxed in the future 1389 * as the kernel becomes smarter at dealing with different initial conditions 1390 * but for now you have to be careful 1391 */ 1392_GLOBAL(start_initialization_book3e) 1393 mflr r28 1394 1395 /* First, we need to setup some initial TLBs to map the kernel 1396 * text, data and bss at PAGE_OFFSET. We don't have a real mode 1397 * and always use AS 0, so we just set it up to match our link 1398 * address and never use 0 based addresses. 1399 */ 1400 bl initial_tlb_book3e 1401 1402 /* Init global core bits */ 1403 bl init_core_book3e 1404 1405 /* Init per-thread bits */ 1406 bl init_thread_book3e 1407 1408 /* Return to common init code */ 1409 tovirt(r28,r28) 1410 mtlr r28 1411 blr 1412 1413 1414/* 1415 * Secondary core/processor entry 1416 * 1417 * This is entered for thread 0 of a secondary core, all other threads 1418 * are expected to be stopped. It's similar to start_initialization_book3e 1419 * except that it's generally entered from the holding loop in head_64.S 1420 * after CPUs have been gathered by Open Firmware. 1421 * 1422 * We assume we are in 32 bits mode running with whatever TLB entry was 1423 * set for us by the firmware or POR engine. 1424 */ 1425_GLOBAL(book3e_secondary_core_init_tlb_set) 1426 li r4,1 1427 b generic_secondary_smp_init 1428 1429_GLOBAL(book3e_secondary_core_init) 1430 mflr r28 1431 1432 /* Do we need to setup initial TLB entry ? */ 1433 cmplwi r4,0 1434 bne 2f 1435 1436 /* Setup TLB for this core */ 1437 bl initial_tlb_book3e 1438 1439 /* We can return from the above running at a different 1440 * address, so recalculate r2 (TOC) 1441 */ 1442 bl relative_toc 1443 1444 /* Init global core bits */ 14452: bl init_core_book3e 1446 1447 /* Init per-thread bits */ 14483: bl init_thread_book3e 1449 1450 /* Return to common init code at proper virtual address. 1451 * 1452 * Due to various previous assumptions, we know we entered this 1453 * function at either the final PAGE_OFFSET mapping or using a 1454 * 1:1 mapping at 0, so we don't bother doing a complicated check 1455 * here, we just ensure the return address has the right top bits. 1456 * 1457 * Note that if we ever want to be smarter about where we can be 1458 * started from, we have to be careful that by the time we reach 1459 * the code below we may already be running at a different location 1460 * than the one we were called from since initial_tlb_book3e can 1461 * have moved us already. 1462 */ 1463 cmpdi cr0,r28,0 1464 blt 1f 1465 lis r3,PAGE_OFFSET@highest 1466 sldi r3,r3,32 1467 or r28,r28,r3 14681: mtlr r28 1469 blr 1470 1471_GLOBAL(book3e_secondary_thread_init) 1472 mflr r28 1473 b 3b 1474 1475 .globl init_core_book3e 1476init_core_book3e: 1477 /* Establish the interrupt vector base */ 1478 tovirt(r2,r2) 1479 LOAD_REG_ADDR(r3, interrupt_base_book3e) 1480 mtspr SPRN_IVPR,r3 1481 sync 1482 blr 1483 1484init_thread_book3e: 1485 lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h 1486 mtspr SPRN_EPCR,r3 1487 1488 /* Make sure interrupts are off */ 1489 wrteei 0 1490 1491 /* disable all timers and clear out status */ 1492 li r3,0 1493 mtspr SPRN_TCR,r3 1494 mfspr r3,SPRN_TSR 1495 mtspr SPRN_TSR,r3 1496 1497 blr 1498 1499_GLOBAL(__setup_base_ivors) 1500 SET_IVOR(0, 0x020) /* Critical Input */ 1501 SET_IVOR(1, 0x000) /* Machine Check */ 1502 SET_IVOR(2, 0x060) /* Data Storage */ 1503 SET_IVOR(3, 0x080) /* Instruction Storage */ 1504 SET_IVOR(4, 0x0a0) /* External Input */ 1505 SET_IVOR(5, 0x0c0) /* Alignment */ 1506 SET_IVOR(6, 0x0e0) /* Program */ 1507 SET_IVOR(7, 0x100) /* FP Unavailable */ 1508 SET_IVOR(8, 0x120) /* System Call */ 1509 SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ 1510 SET_IVOR(10, 0x160) /* Decrementer */ 1511 SET_IVOR(11, 0x180) /* Fixed Interval Timer */ 1512 SET_IVOR(12, 0x1a0) /* Watchdog Timer */ 1513 SET_IVOR(13, 0x1c0) /* Data TLB Error */ 1514 SET_IVOR(14, 0x1e0) /* Instruction TLB Error */ 1515 SET_IVOR(15, 0x040) /* Debug */ 1516 1517 sync 1518 1519 blr 1520 1521_GLOBAL(setup_altivec_ivors) 1522 SET_IVOR(32, 0x200) /* AltiVec Unavailable */ 1523 SET_IVOR(33, 0x220) /* AltiVec Assist */ 1524 blr 1525 1526_GLOBAL(setup_perfmon_ivor) 1527 SET_IVOR(35, 0x260) /* Performance Monitor */ 1528 blr 1529 1530_GLOBAL(setup_doorbell_ivors) 1531 SET_IVOR(36, 0x280) /* Processor Doorbell */ 1532 SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */ 1533 blr 1534 1535_GLOBAL(setup_ehv_ivors) 1536 SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */ 1537 SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */ 1538 SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */ 1539 SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */ 1540 blr 1541 1542_GLOBAL(setup_lrat_ivor) 1543 SET_IVOR(42, 0x340) /* LRAT Error */ 1544 blr 1545