xref: /linux/arch/powerpc/kernel/exceptions-64e.S (revision 2a2dfc869d3345ccdd91322b023f4b0da84acbe7)
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 *  Boot code and exception vectors for Book3E processors
4 *
5 *  Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
6 */
7
8#include <linux/threads.h>
9#include <asm/reg.h>
10#include <asm/page.h>
11#include <asm/ppc_asm.h>
12#include <asm/asm-offsets.h>
13#include <asm/cputable.h>
14#include <asm/setup.h>
15#include <asm/thread_info.h>
16#include <asm/reg_a2.h>
17#include <asm/exception-64e.h>
18#include <asm/bug.h>
19#include <asm/irqflags.h>
20#include <asm/ptrace.h>
21#include <asm/ppc-opcode.h>
22#include <asm/mmu.h>
23#include <asm/hw_irq.h>
24#include <asm/kvm_asm.h>
25#include <asm/kvm_booke_hv_asm.h>
26#include <asm/feature-fixups.h>
27#include <asm/context_tracking.h>
28
29/* 64e interrupt returns always use SRR registers */
30#define fast_interrupt_return fast_interrupt_return_srr
31#define interrupt_return interrupt_return_srr
32
33/* XXX This will ultimately add space for a special exception save
34 *     structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
35 *     when taking special interrupts. For now we don't support that,
36 *     special interrupts from within a non-standard level will probably
37 *     blow you up
38 */
39#define SPECIAL_EXC_SRR0	0
40#define SPECIAL_EXC_SRR1	1
41#define SPECIAL_EXC_SPRG_GEN	2
42#define SPECIAL_EXC_SPRG_TLB	3
43#define SPECIAL_EXC_MAS0	4
44#define SPECIAL_EXC_MAS1	5
45#define SPECIAL_EXC_MAS2	6
46#define SPECIAL_EXC_MAS3	7
47#define SPECIAL_EXC_MAS6	8
48#define SPECIAL_EXC_MAS7	9
49#define SPECIAL_EXC_MAS5	10	/* E.HV only */
50#define SPECIAL_EXC_MAS8	11	/* E.HV only */
51#define SPECIAL_EXC_IRQHAPPENED	12
52#define SPECIAL_EXC_DEAR	13
53#define SPECIAL_EXC_ESR		14
54#define SPECIAL_EXC_SOFTE	15
55#define SPECIAL_EXC_CSRR0	16
56#define SPECIAL_EXC_CSRR1	17
57/* must be even to keep 16-byte stack alignment */
58#define SPECIAL_EXC_END		18
59
60#define SPECIAL_EXC_FRAME_SIZE	(INT_FRAME_SIZE + SPECIAL_EXC_END * 8)
61#define SPECIAL_EXC_FRAME_OFFS  (INT_FRAME_SIZE - 288)
62
63#define SPECIAL_EXC_STORE(reg, name) \
64	std	reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1)
65
66#define SPECIAL_EXC_LOAD(reg, name) \
67	ld	reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1)
68
69special_reg_save:
70	/*
71	 * We only need (or have stack space) to save this stuff if
72	 * we interrupted the kernel.
73	 */
74	ld	r3,_MSR(r1)
75	andi.	r3,r3,MSR_PR
76	bnelr
77
78	/*
79	 * Advance to the next TLB exception frame for handler
80	 * types that don't do it automatically.
81	 */
82	LOAD_REG_ADDR(r11,extlb_level_exc)
83	lwz	r12,0(r11)
84	mfspr	r10,SPRN_SPRG_TLB_EXFRAME
85	add	r10,r10,r12
86	mtspr	SPRN_SPRG_TLB_EXFRAME,r10
87
88	/*
89	 * Save registers needed to allow nesting of certain exceptions
90	 * (such as TLB misses) inside special exception levels
91	 */
92	mfspr	r10,SPRN_SRR0
93	SPECIAL_EXC_STORE(r10,SRR0)
94	mfspr	r10,SPRN_SRR1
95	SPECIAL_EXC_STORE(r10,SRR1)
96	mfspr	r10,SPRN_SPRG_GEN_SCRATCH
97	SPECIAL_EXC_STORE(r10,SPRG_GEN)
98	mfspr	r10,SPRN_SPRG_TLB_SCRATCH
99	SPECIAL_EXC_STORE(r10,SPRG_TLB)
100	mfspr	r10,SPRN_MAS0
101	SPECIAL_EXC_STORE(r10,MAS0)
102	mfspr	r10,SPRN_MAS1
103	SPECIAL_EXC_STORE(r10,MAS1)
104	mfspr	r10,SPRN_MAS2
105	SPECIAL_EXC_STORE(r10,MAS2)
106	mfspr	r10,SPRN_MAS3
107	SPECIAL_EXC_STORE(r10,MAS3)
108	mfspr	r10,SPRN_MAS6
109	SPECIAL_EXC_STORE(r10,MAS6)
110	mfspr	r10,SPRN_MAS7
111	SPECIAL_EXC_STORE(r10,MAS7)
112BEGIN_FTR_SECTION
113	mfspr	r10,SPRN_MAS5
114	SPECIAL_EXC_STORE(r10,MAS5)
115	mfspr	r10,SPRN_MAS8
116	SPECIAL_EXC_STORE(r10,MAS8)
117
118	/* MAS5/8 could have inappropriate values if we interrupted KVM code */
119	li	r10,0
120	mtspr	SPRN_MAS5,r10
121	mtspr	SPRN_MAS8,r10
122END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
123	mfspr	r10,SPRN_DEAR
124	SPECIAL_EXC_STORE(r10,DEAR)
125	mfspr	r10,SPRN_ESR
126	SPECIAL_EXC_STORE(r10,ESR)
127
128	ld	r10,_NIP(r1)
129	SPECIAL_EXC_STORE(r10,CSRR0)
130	ld	r10,_MSR(r1)
131	SPECIAL_EXC_STORE(r10,CSRR1)
132
133	blr
134
135ret_from_level_except:
136	ld	r3,_MSR(r1)
137	andi.	r3,r3,MSR_PR
138	beq	1f
139	REST_NVGPRS(r1)
140	b	interrupt_return
1411:
142
143	LOAD_REG_ADDR(r11,extlb_level_exc)
144	lwz	r12,0(r11)
145	mfspr	r10,SPRN_SPRG_TLB_EXFRAME
146	sub	r10,r10,r12
147	mtspr	SPRN_SPRG_TLB_EXFRAME,r10
148
149	/*
150	 * It's possible that the special level exception interrupted a
151	 * TLB miss handler, and inserted the same entry that the
152	 * interrupted handler was about to insert.  On CPUs without TLB
153	 * write conditional, this can result in a duplicate TLB entry.
154	 * Wipe all non-bolted entries to be safe.
155	 *
156	 * Note that this doesn't protect against any TLB misses
157	 * we may take accessing the stack from here to the end of
158	 * the special level exception.  It's not clear how we can
159	 * reasonably protect against that, but only CPUs with
160	 * neither TLB write conditional nor bolted kernel memory
161	 * are affected.  Do any such CPUs even exist?
162	 */
163	PPC_TLBILX_ALL(0,R0)
164
165	REST_NVGPRS(r1)
166
167	SPECIAL_EXC_LOAD(r10,SRR0)
168	mtspr	SPRN_SRR0,r10
169	SPECIAL_EXC_LOAD(r10,SRR1)
170	mtspr	SPRN_SRR1,r10
171	SPECIAL_EXC_LOAD(r10,SPRG_GEN)
172	mtspr	SPRN_SPRG_GEN_SCRATCH,r10
173	SPECIAL_EXC_LOAD(r10,SPRG_TLB)
174	mtspr	SPRN_SPRG_TLB_SCRATCH,r10
175	SPECIAL_EXC_LOAD(r10,MAS0)
176	mtspr	SPRN_MAS0,r10
177	SPECIAL_EXC_LOAD(r10,MAS1)
178	mtspr	SPRN_MAS1,r10
179	SPECIAL_EXC_LOAD(r10,MAS2)
180	mtspr	SPRN_MAS2,r10
181	SPECIAL_EXC_LOAD(r10,MAS3)
182	mtspr	SPRN_MAS3,r10
183	SPECIAL_EXC_LOAD(r10,MAS6)
184	mtspr	SPRN_MAS6,r10
185	SPECIAL_EXC_LOAD(r10,MAS7)
186	mtspr	SPRN_MAS7,r10
187BEGIN_FTR_SECTION
188	SPECIAL_EXC_LOAD(r10,MAS5)
189	mtspr	SPRN_MAS5,r10
190	SPECIAL_EXC_LOAD(r10,MAS8)
191	mtspr	SPRN_MAS8,r10
192END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
193
194	SPECIAL_EXC_LOAD(r10,DEAR)
195	mtspr	SPRN_DEAR,r10
196	SPECIAL_EXC_LOAD(r10,ESR)
197	mtspr	SPRN_ESR,r10
198
199	stdcx.	r0,0,r1		/* to clear the reservation */
200
201	REST_GPRS(2, 9, r1)
202
203	ld	r10,_CTR(r1)
204	ld	r11,_XER(r1)
205	mtctr	r10
206	mtxer	r11
207
208	blr
209
210.macro ret_from_level srr0 srr1 paca_ex scratch
211	bl	ret_from_level_except
212
213	ld	r10,_LINK(r1)
214	ld	r11,_CCR(r1)
215	ld	r0,GPR13(r1)
216	mtlr	r10
217	mtcr	r11
218
219	ld	r10,GPR10(r1)
220	ld	r11,GPR11(r1)
221	ld	r12,GPR12(r1)
222	mtspr	\scratch,r0
223
224	std	r10,\paca_ex+EX_R10(r13);
225	std	r11,\paca_ex+EX_R11(r13);
226	ld	r10,_NIP(r1)
227	ld	r11,_MSR(r1)
228	ld	r0,GPR0(r1)
229	ld	r1,GPR1(r1)
230	mtspr	\srr0,r10
231	mtspr	\srr1,r11
232	ld	r10,\paca_ex+EX_R10(r13)
233	ld	r11,\paca_ex+EX_R11(r13)
234	mfspr	r13,\scratch
235.endm
236
237ret_from_crit_except:
238	ret_from_level SPRN_CSRR0 SPRN_CSRR1 PACA_EXCRIT SPRN_SPRG_CRIT_SCRATCH
239	rfci
240
241ret_from_mc_except:
242	ret_from_level SPRN_MCSRR0 SPRN_MCSRR1 PACA_EXMC SPRN_SPRG_MC_SCRATCH
243	rfmci
244
245/* Exception prolog code for all exceptions */
246#define EXCEPTION_PROLOG(n, intnum, type, addition)	    		    \
247	mtspr	SPRN_SPRG_##type##_SCRATCH,r13;	/* get spare registers */   \
248	mfspr	r13,SPRN_SPRG_PACA;	/* get PACA */			    \
249	std	r10,PACA_EX##type+EX_R10(r13);				    \
250	std	r11,PACA_EX##type+EX_R11(r13);				    \
251	mfcr	r10;			/* save CR */			    \
252	mfspr	r11,SPRN_##type##_SRR1;/* what are we coming from */	    \
253	DO_KVM	intnum,SPRN_##type##_SRR1;    /* KVM hook */		    \
254	stw	r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
255	addition;			/* additional code for that exc. */ \
256	std	r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */  \
257	type##_SET_KSTACK;		/* get special stack if necessary */\
258	andi.	r10,r11,MSR_PR;		/* save stack pointer */	    \
259	beq	1f;			/* branch around if supervisor */   \
260	ld	r1,PACAKSAVE(r13);	/* get kernel stack coming from usr */\
2611:	type##_BTB_FLUSH		\
262	cmpdi	cr1,r1,0;		/* check if SP makes sense */	    \
263	bge-	cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
264	mfspr	r10,SPRN_##type##_SRR0;	/* read SRR0 before touching stack */
265
266/* Exception type-specific macros */
267#define	GEN_SET_KSTACK							    \
268	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack */
269#define SPRN_GEN_SRR0	SPRN_SRR0
270#define SPRN_GEN_SRR1	SPRN_SRR1
271
272#define	GDBELL_SET_KSTACK	GEN_SET_KSTACK
273#define SPRN_GDBELL_SRR0	SPRN_GSRR0
274#define SPRN_GDBELL_SRR1	SPRN_GSRR1
275
276#define CRIT_SET_KSTACK						            \
277	ld	r1,PACA_CRIT_STACK(r13);				    \
278	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE
279#define SPRN_CRIT_SRR0	SPRN_CSRR0
280#define SPRN_CRIT_SRR1	SPRN_CSRR1
281
282#define DBG_SET_KSTACK						            \
283	ld	r1,PACA_DBG_STACK(r13);					    \
284	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE
285#define SPRN_DBG_SRR0	SPRN_DSRR0
286#define SPRN_DBG_SRR1	SPRN_DSRR1
287
288#define MC_SET_KSTACK						            \
289	ld	r1,PACA_MC_STACK(r13);					    \
290	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE
291#define SPRN_MC_SRR0	SPRN_MCSRR0
292#define SPRN_MC_SRR1	SPRN_MCSRR1
293
294#ifdef CONFIG_PPC_FSL_BOOK3E
295#define GEN_BTB_FLUSH			\
296	START_BTB_FLUSH_SECTION		\
297		beq 1f;			\
298		BTB_FLUSH(r10)			\
299		1:		\
300	END_BTB_FLUSH_SECTION
301
302#define CRIT_BTB_FLUSH			\
303	START_BTB_FLUSH_SECTION		\
304		BTB_FLUSH(r10)		\
305	END_BTB_FLUSH_SECTION
306
307#define DBG_BTB_FLUSH CRIT_BTB_FLUSH
308#define MC_BTB_FLUSH CRIT_BTB_FLUSH
309#define GDBELL_BTB_FLUSH GEN_BTB_FLUSH
310#else
311#define GEN_BTB_FLUSH
312#define CRIT_BTB_FLUSH
313#define DBG_BTB_FLUSH
314#define MC_BTB_FLUSH
315#define GDBELL_BTB_FLUSH
316#endif
317
318#define NORMAL_EXCEPTION_PROLOG(n, intnum, addition)			    \
319	EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n))
320
321#define CRIT_EXCEPTION_PROLOG(n, intnum, addition)			    \
322	EXCEPTION_PROLOG(n, intnum, CRIT, addition##_CRIT(n))
323
324#define DBG_EXCEPTION_PROLOG(n, intnum, addition)			    \
325	EXCEPTION_PROLOG(n, intnum, DBG, addition##_DBG(n))
326
327#define MC_EXCEPTION_PROLOG(n, intnum, addition)			    \
328	EXCEPTION_PROLOG(n, intnum, MC, addition##_MC(n))
329
330#define GDBELL_EXCEPTION_PROLOG(n, intnum, addition)			    \
331	EXCEPTION_PROLOG(n, intnum, GDBELL, addition##_GDBELL(n))
332
333/* Variants of the "addition" argument for the prolog
334 */
335#define PROLOG_ADDITION_NONE_GEN(n)
336#define PROLOG_ADDITION_NONE_GDBELL(n)
337#define PROLOG_ADDITION_NONE_CRIT(n)
338#define PROLOG_ADDITION_NONE_DBG(n)
339#define PROLOG_ADDITION_NONE_MC(n)
340
341#define PROLOG_ADDITION_MASKABLE_GEN(n)					    \
342	lbz	r10,PACAIRQSOFTMASK(r13);	/* are irqs soft-masked? */ \
343	andi.	r10,r10,IRQS_DISABLED;	/* yes -> go out of line */ \
344	bne	masked_interrupt_book3e_##n
345
346/*
347 * Additional regs must be re-loaded from paca before EXCEPTION_COMMON* is
348 * called, because that does SAVE_NVGPRS which must see the original register
349 * values, otherwise the scratch values might be restored when exiting the
350 * interrupt.
351 */
352#define PROLOG_ADDITION_2REGS_GEN(n)					    \
353	std	r14,PACA_EXGEN+EX_R14(r13);				    \
354	std	r15,PACA_EXGEN+EX_R15(r13)
355
356#define PROLOG_ADDITION_1REG_GEN(n)					    \
357	std	r14,PACA_EXGEN+EX_R14(r13);
358
359#define PROLOG_ADDITION_2REGS_CRIT(n)					    \
360	std	r14,PACA_EXCRIT+EX_R14(r13);				    \
361	std	r15,PACA_EXCRIT+EX_R15(r13)
362
363#define PROLOG_ADDITION_2REGS_DBG(n)					    \
364	std	r14,PACA_EXDBG+EX_R14(r13);				    \
365	std	r15,PACA_EXDBG+EX_R15(r13)
366
367#define PROLOG_ADDITION_2REGS_MC(n)					    \
368	std	r14,PACA_EXMC+EX_R14(r13);				    \
369	std	r15,PACA_EXMC+EX_R15(r13)
370
371
372/* Core exception code for all exceptions except TLB misses. */
373#define EXCEPTION_COMMON_LVL(n, scratch, excf)				    \
374exc_##n##_common:							    \
375	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
376	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
377	SAVE_GPRS(3, 9, r1);		/* save r3 - r9 in stackframe */    \
378	std	r10,_NIP(r1);		/* save SRR0 to stackframe */	    \
379	std	r11,_MSR(r1);		/* save SRR1 to stackframe */	    \
380	beq	2f;			/* if from kernel mode */	    \
3812:	ld	r3,excf+EX_R10(r13);	/* get back r10 */		    \
382	ld	r4,excf+EX_R11(r13);	/* get back r11 */		    \
383	mfspr	r5,scratch;		/* get back r13 */		    \
384	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
385	ld	r2,PACATOC(r13);	/* get kernel TOC into r2 */	    \
386	mflr	r6;			/* save LR in stackframe */	    \
387	mfctr	r7;			/* save CTR in stackframe */	    \
388	mfspr	r8,SPRN_XER;		/* save XER in stackframe */	    \
389	ld	r9,excf+EX_R1(r13);	/* load orig r1 back from PACA */   \
390	lwz	r10,excf+EX_CR(r13);	/* load orig CR back from PACA	*/  \
391	lbz	r11,PACAIRQSOFTMASK(r13); /* get current IRQ softe */	    \
392	ld	r12,exception_marker@toc(r2);				    \
393	li	r0,0;							    \
394	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
395	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
396	std	r5,GPR13(r1);		/* save it to stackframe */	    \
397	std	r6,_LINK(r1);						    \
398	std	r7,_CTR(r1);						    \
399	std	r8,_XER(r1);						    \
400	li	r3,(n);			/* regs.trap vector */		    \
401	std	r9,0(r1);		/* store stack frame back link */   \
402	std	r10,_CCR(r1);		/* store orig CR in stackframe */   \
403	std	r9,GPR1(r1);		/* store stack frame back link */   \
404	std	r11,SOFTE(r1);		/* and save it to stackframe */     \
405	std	r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */	    \
406	std	r3,_TRAP(r1);		/* set trap number		*/  \
407	std	r0,RESULT(r1);		/* clear regs->result */	    \
408	SAVE_NVGPRS(r1);
409
410#define EXCEPTION_COMMON(n) \
411	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_GEN_SCRATCH, PACA_EXGEN)
412#define EXCEPTION_COMMON_CRIT(n) \
413	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_CRIT_SCRATCH, PACA_EXCRIT)
414#define EXCEPTION_COMMON_MC(n) \
415	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_MC_SCRATCH, PACA_EXMC)
416#define EXCEPTION_COMMON_DBG(n) \
417	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_DBG_SCRATCH, PACA_EXDBG)
418
419/* XXX FIXME: Restore r14/r15 when necessary */
420#define BAD_STACK_TRAMPOLINE(n)						    \
421exc_##n##_bad_stack:							    \
422	li	r1,(n);			/* get exception number */	    \
423	sth	r1,PACA_TRAP_SAVE(r13);	/* store trap */		    \
424	b	bad_stack_book3e;	/* bad stack error */
425
426/* WARNING: If you change the layout of this stub, make sure you check
427	*   the debug exception handler which handles single stepping
428	*   into exceptions from userspace, and the MM code in
429	*   arch/powerpc/mm/tlb_nohash.c which patches the branch here
430	*   and would need to be updated if that branch is moved
431	*/
432#define	EXCEPTION_STUB(loc, label)					\
433	. = interrupt_base_book3e + loc;				\
434	nop;	/* To make debug interrupts happy */			\
435	b	exc_##label##_book3e;
436
437#define ACK_NONE(r)
438#define ACK_DEC(r)							\
439	lis	r,TSR_DIS@h;						\
440	mtspr	SPRN_TSR,r
441#define ACK_FIT(r)							\
442	lis	r,TSR_FIS@h;						\
443	mtspr	SPRN_TSR,r
444
445/* Used by asynchronous interrupt that may happen in the idle loop.
446 *
447 * This check if the thread was in the idle loop, and if yes, returns
448 * to the caller rather than the PC. This is to avoid a race if
449 * interrupts happen before the wait instruction.
450 */
451#define CHECK_NAPPING()							\
452	ld	r11, PACA_THREAD_INFO(r13);				\
453	ld	r10,TI_LOCAL_FLAGS(r11);				\
454	andi.	r9,r10,_TLF_NAPPING;					\
455	beq+	1f;							\
456	ld	r8,_LINK(r1);						\
457	rlwinm	r7,r10,0,~_TLF_NAPPING;					\
458	std	r8,_NIP(r1);						\
459	std	r7,TI_LOCAL_FLAGS(r11);					\
4601:
461
462
463#define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr, ack)		\
464	START_EXCEPTION(label);						\
465	NORMAL_EXCEPTION_PROLOG(trapnum, intnum, PROLOG_ADDITION_MASKABLE)\
466	EXCEPTION_COMMON(trapnum)					\
467	ack(r8);							\
468	CHECK_NAPPING();						\
469	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
470	bl	hdlr;							\
471	b	interrupt_return
472
473/* This value is used to mark exception frames on the stack. */
474	.section	".toc","aw"
475exception_marker:
476	.tc	ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
477
478
479/*
480 * And here we have the exception vectors !
481 */
482
483	.text
484	.balign	0x1000
485	.globl interrupt_base_book3e
486interrupt_base_book3e:					/* fake trap */
487	EXCEPTION_STUB(0x000, machine_check)
488	EXCEPTION_STUB(0x020, critical_input)		/* 0x0100 */
489	EXCEPTION_STUB(0x040, debug_crit)		/* 0x0d00 */
490	EXCEPTION_STUB(0x060, data_storage)		/* 0x0300 */
491	EXCEPTION_STUB(0x080, instruction_storage)	/* 0x0400 */
492	EXCEPTION_STUB(0x0a0, external_input)		/* 0x0500 */
493	EXCEPTION_STUB(0x0c0, alignment)		/* 0x0600 */
494	EXCEPTION_STUB(0x0e0, program)			/* 0x0700 */
495	EXCEPTION_STUB(0x100, fp_unavailable)		/* 0x0800 */
496	EXCEPTION_STUB(0x120, system_call)		/* 0x0c00 */
497	EXCEPTION_STUB(0x140, ap_unavailable)		/* 0x0f20 */
498	EXCEPTION_STUB(0x160, decrementer)		/* 0x0900 */
499	EXCEPTION_STUB(0x180, fixed_interval)		/* 0x0980 */
500	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
501	EXCEPTION_STUB(0x1c0, data_tlb_miss)
502	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
503	EXCEPTION_STUB(0x200, altivec_unavailable)
504	EXCEPTION_STUB(0x220, altivec_assist)
505	EXCEPTION_STUB(0x260, perfmon)
506	EXCEPTION_STUB(0x280, doorbell)
507	EXCEPTION_STUB(0x2a0, doorbell_crit)
508	EXCEPTION_STUB(0x2c0, guest_doorbell)
509	EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
510	EXCEPTION_STUB(0x300, hypercall)
511	EXCEPTION_STUB(0x320, ehpriv)
512	EXCEPTION_STUB(0x340, lrat_error)
513
514	.globl __end_interrupts
515__end_interrupts:
516
517/* Critical Input Interrupt */
518	START_EXCEPTION(critical_input);
519	CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL,
520			      PROLOG_ADDITION_NONE)
521	EXCEPTION_COMMON_CRIT(0x100)
522	bl	special_reg_save
523	CHECK_NAPPING();
524	addi	r3,r1,STACK_FRAME_OVERHEAD
525	bl	unknown_nmi_exception
526	b	ret_from_crit_except
527
528/* Machine Check Interrupt */
529	START_EXCEPTION(machine_check);
530	MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK,
531			    PROLOG_ADDITION_NONE)
532	EXCEPTION_COMMON_MC(0x000)
533	bl	special_reg_save
534	CHECK_NAPPING();
535	addi	r3,r1,STACK_FRAME_OVERHEAD
536	bl	machine_check_exception
537	b	ret_from_mc_except
538
539/* Data Storage Interrupt */
540	START_EXCEPTION(data_storage)
541	NORMAL_EXCEPTION_PROLOG(0x300, BOOKE_INTERRUPT_DATA_STORAGE,
542				PROLOG_ADDITION_2REGS)
543	mfspr	r14,SPRN_DEAR
544	mfspr	r15,SPRN_ESR
545	std	r14,_DEAR(r1)
546	std	r15,_ESR(r1)
547	ld	r14,PACA_EXGEN+EX_R14(r13)
548	ld	r15,PACA_EXGEN+EX_R15(r13)
549	EXCEPTION_COMMON(0x300)
550	b	storage_fault_common
551
552/* Instruction Storage Interrupt */
553	START_EXCEPTION(instruction_storage);
554	NORMAL_EXCEPTION_PROLOG(0x400, BOOKE_INTERRUPT_INST_STORAGE,
555				PROLOG_ADDITION_2REGS)
556	li	r15,0
557	mr	r14,r10
558	std	r14,_DEAR(r1)
559	std	r15,_ESR(r1)
560	ld	r14,PACA_EXGEN+EX_R14(r13)
561	ld	r15,PACA_EXGEN+EX_R15(r13)
562	EXCEPTION_COMMON(0x400)
563	b	storage_fault_common
564
565/* External Input Interrupt */
566	MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL,
567			   external_input, do_IRQ, ACK_NONE)
568
569/* Alignment */
570	START_EXCEPTION(alignment);
571	NORMAL_EXCEPTION_PROLOG(0x600, BOOKE_INTERRUPT_ALIGNMENT,
572				PROLOG_ADDITION_2REGS)
573	mfspr	r14,SPRN_DEAR
574	mfspr	r15,SPRN_ESR
575	std	r14,_DEAR(r1)
576	std	r15,_ESR(r1)
577	ld	r14,PACA_EXGEN+EX_R14(r13)
578	ld	r15,PACA_EXGEN+EX_R15(r13)
579	EXCEPTION_COMMON(0x600)
580	b	alignment_more	/* no room, go out of line */
581
582/* Program Interrupt */
583	START_EXCEPTION(program);
584	NORMAL_EXCEPTION_PROLOG(0x700, BOOKE_INTERRUPT_PROGRAM,
585				PROLOG_ADDITION_1REG)
586	mfspr	r14,SPRN_ESR
587	std	r14,_ESR(r1)
588	ld	r14,PACA_EXGEN+EX_R14(r13)
589	EXCEPTION_COMMON(0x700)
590	addi	r3,r1,STACK_FRAME_OVERHEAD
591	bl	program_check_exception
592	REST_NVGPRS(r1)
593	b	interrupt_return
594
595/* Floating Point Unavailable Interrupt */
596	START_EXCEPTION(fp_unavailable);
597	NORMAL_EXCEPTION_PROLOG(0x800, BOOKE_INTERRUPT_FP_UNAVAIL,
598				PROLOG_ADDITION_NONE)
599	/* we can probably do a shorter exception entry for that one... */
600	EXCEPTION_COMMON(0x800)
601	ld	r12,_MSR(r1)
602	andi.	r0,r12,MSR_PR;
603	beq-	1f
604	bl	load_up_fpu
605	b	fast_interrupt_return
6061:	addi	r3,r1,STACK_FRAME_OVERHEAD
607	bl	kernel_fp_unavailable_exception
608	b	interrupt_return
609
610/* Altivec Unavailable Interrupt */
611	START_EXCEPTION(altivec_unavailable);
612	NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_ALTIVEC_UNAVAIL,
613				PROLOG_ADDITION_NONE)
614	/* we can probably do a shorter exception entry for that one... */
615	EXCEPTION_COMMON(0x200)
616#ifdef CONFIG_ALTIVEC
617BEGIN_FTR_SECTION
618	ld	r12,_MSR(r1)
619	andi.	r0,r12,MSR_PR;
620	beq-	1f
621	bl	load_up_altivec
622	b	fast_interrupt_return
6231:
624END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
625#endif
626	addi	r3,r1,STACK_FRAME_OVERHEAD
627	bl	altivec_unavailable_exception
628	b	interrupt_return
629
630/* AltiVec Assist */
631	START_EXCEPTION(altivec_assist);
632	NORMAL_EXCEPTION_PROLOG(0x220,
633				BOOKE_INTERRUPT_ALTIVEC_ASSIST,
634				PROLOG_ADDITION_NONE)
635	EXCEPTION_COMMON(0x220)
636	addi	r3,r1,STACK_FRAME_OVERHEAD
637#ifdef CONFIG_ALTIVEC
638BEGIN_FTR_SECTION
639	bl	altivec_assist_exception
640END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
641	REST_NVGPRS(r1)
642#else
643	bl	unknown_exception
644#endif
645	b	interrupt_return
646
647
648/* Decrementer Interrupt */
649	MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER,
650			   decrementer, timer_interrupt, ACK_DEC)
651
652/* Fixed Interval Timer Interrupt */
653	MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT,
654			   fixed_interval, unknown_exception, ACK_FIT)
655
656/* Watchdog Timer Interrupt */
657	START_EXCEPTION(watchdog);
658	CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG,
659			      PROLOG_ADDITION_NONE)
660	EXCEPTION_COMMON_CRIT(0x9f0)
661	bl	special_reg_save
662	CHECK_NAPPING();
663	addi	r3,r1,STACK_FRAME_OVERHEAD
664#ifdef CONFIG_BOOKE_WDT
665	bl	WatchdogException
666#else
667	bl	unknown_nmi_exception
668#endif
669	b	ret_from_crit_except
670
671/* System Call Interrupt */
672	START_EXCEPTION(system_call)
673	mr	r9,r13			/* keep a copy of userland r13 */
674	mfspr	r11,SPRN_SRR0		/* get return address */
675	mfspr	r12,SPRN_SRR1		/* get previous MSR */
676	mfspr	r13,SPRN_SPRG_PACA	/* get our PACA */
677	b	system_call_common
678
679/* Auxiliary Processor Unavailable Interrupt */
680	START_EXCEPTION(ap_unavailable);
681	NORMAL_EXCEPTION_PROLOG(0xf20, BOOKE_INTERRUPT_AP_UNAVAIL,
682				PROLOG_ADDITION_NONE)
683	EXCEPTION_COMMON(0xf20)
684	addi	r3,r1,STACK_FRAME_OVERHEAD
685	bl	unknown_exception
686	b	interrupt_return
687
688/* Debug exception as a critical interrupt*/
689	START_EXCEPTION(debug_crit);
690	CRIT_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
691			      PROLOG_ADDITION_2REGS)
692
693	/*
694	 * If there is a single step or branch-taken exception in an
695	 * exception entry sequence, it was probably meant to apply to
696	 * the code where the exception occurred (since exception entry
697	 * doesn't turn off DE automatically).  We simulate the effect
698	 * of turning off DE on entry to an exception handler by turning
699	 * off DE in the CSRR1 value and clearing the debug status.
700	 */
701
702	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
703	andis.	r15,r14,(DBSR_IC|DBSR_BT)@h
704	beq+	1f
705
706#ifdef CONFIG_RELOCATABLE
707	ld	r15,PACATOC(r13)
708	ld	r14,interrupt_base_book3e@got(r15)
709	ld	r15,__end_interrupts@got(r15)
710	cmpld	cr0,r10,r14
711	cmpld	cr1,r10,r15
712#else
713	LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e)
714	cmpld	cr0, r10, r14
715	LOAD_REG_IMMEDIATE_SYM(r14, r15, __end_interrupts)
716	cmpld	cr1, r10, r14
717#endif
718	blt+	cr0,1f
719	bge+	cr1,1f
720
721	/* here it looks like we got an inappropriate debug exception. */
722	lis	r14,(DBSR_IC|DBSR_BT)@h		/* clear the event */
723	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the CSRR1 value */
724	mtspr	SPRN_DBSR,r14
725	mtspr	SPRN_CSRR1,r11
726	lwz	r10,PACA_EXCRIT+EX_CR(r13)	/* restore registers */
727	ld	r1,PACA_EXCRIT+EX_R1(r13)
728	ld	r14,PACA_EXCRIT+EX_R14(r13)
729	ld	r15,PACA_EXCRIT+EX_R15(r13)
730	mtcr	r10
731	ld	r10,PACA_EXCRIT+EX_R10(r13)	/* restore registers */
732	ld	r11,PACA_EXCRIT+EX_R11(r13)
733	mfspr	r13,SPRN_SPRG_CRIT_SCRATCH
734	rfci
735
736	/* Normal debug exception */
737	/* XXX We only handle coming from userspace for now since we can't
738	 *     quite save properly an interrupted kernel state yet
739	 */
7401:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
741	beq	kernel_dbg_exc;		/* if from kernel mode */
742
743	/* Now we mash up things to make it look like we are coming on a
744	 * normal exception
745	 */
746	mfspr	r14,SPRN_DBSR
747	std	r14,_DSISR(r1)
748	ld	r14,PACA_EXCRIT+EX_R14(r13)
749	ld	r15,PACA_EXCRIT+EX_R15(r13)
750	EXCEPTION_COMMON_CRIT(0xd00)
751	addi	r3,r1,STACK_FRAME_OVERHEAD
752	bl	DebugException
753	REST_NVGPRS(r1)
754	b	interrupt_return
755
756kernel_dbg_exc:
757	b	.	/* NYI */
758
759/* Debug exception as a debug interrupt*/
760	START_EXCEPTION(debug_debug);
761	DBG_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
762						 PROLOG_ADDITION_2REGS)
763
764	/*
765	 * If there is a single step or branch-taken exception in an
766	 * exception entry sequence, it was probably meant to apply to
767	 * the code where the exception occurred (since exception entry
768	 * doesn't turn off DE automatically).  We simulate the effect
769	 * of turning off DE on entry to an exception handler by turning
770	 * off DE in the DSRR1 value and clearing the debug status.
771	 */
772
773	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
774	andis.	r15,r14,(DBSR_IC|DBSR_BT)@h
775	beq+	1f
776
777#ifdef CONFIG_RELOCATABLE
778	ld	r15,PACATOC(r13)
779	ld	r14,interrupt_base_book3e@got(r15)
780	ld	r15,__end_interrupts@got(r15)
781	cmpld	cr0,r10,r14
782	cmpld	cr1,r10,r15
783#else
784	LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e)
785	cmpld	cr0, r10, r14
786	LOAD_REG_IMMEDIATE_SYM(r14, r15,__end_interrupts)
787	cmpld	cr1, r10, r14
788#endif
789	blt+	cr0,1f
790	bge+	cr1,1f
791
792	/* here it looks like we got an inappropriate debug exception. */
793	lis	r14,(DBSR_IC|DBSR_BT)@h		/* clear the event */
794	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the DSRR1 value */
795	mtspr	SPRN_DBSR,r14
796	mtspr	SPRN_DSRR1,r11
797	lwz	r10,PACA_EXDBG+EX_CR(r13)	/* restore registers */
798	ld	r1,PACA_EXDBG+EX_R1(r13)
799	ld	r14,PACA_EXDBG+EX_R14(r13)
800	ld	r15,PACA_EXDBG+EX_R15(r13)
801	mtcr	r10
802	ld	r10,PACA_EXDBG+EX_R10(r13)	/* restore registers */
803	ld	r11,PACA_EXDBG+EX_R11(r13)
804	mfspr	r13,SPRN_SPRG_DBG_SCRATCH
805	rfdi
806
807	/* Normal debug exception */
808	/* XXX We only handle coming from userspace for now since we can't
809	 *     quite save properly an interrupted kernel state yet
810	 */
8111:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
812	beq	kernel_dbg_exc;		/* if from kernel mode */
813
814	/* Now we mash up things to make it look like we are coming on a
815	 * normal exception
816	 */
817	mfspr	r14,SPRN_DBSR
818	std	r14,_DSISR(r1)
819	ld	r14,PACA_EXDBG+EX_R14(r13)
820	ld	r15,PACA_EXDBG+EX_R15(r13)
821	EXCEPTION_COMMON_DBG(0xd08)
822	addi	r3,r1,STACK_FRAME_OVERHEAD
823	bl	DebugException
824	REST_NVGPRS(r1)
825	b	interrupt_return
826
827	START_EXCEPTION(perfmon);
828	NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
829				PROLOG_ADDITION_NONE)
830	EXCEPTION_COMMON(0x260)
831	CHECK_NAPPING()
832	addi	r3,r1,STACK_FRAME_OVERHEAD
833	bl	performance_monitor_exception
834	b	interrupt_return
835
836/* Doorbell interrupt */
837	MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
838			   doorbell, doorbell_exception, ACK_NONE)
839
840/* Doorbell critical Interrupt */
841	START_EXCEPTION(doorbell_crit);
842	CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL,
843			      PROLOG_ADDITION_NONE)
844	EXCEPTION_COMMON_CRIT(0x2a0)
845	bl	special_reg_save
846	CHECK_NAPPING();
847	addi	r3,r1,STACK_FRAME_OVERHEAD
848	bl	unknown_nmi_exception
849	b	ret_from_crit_except
850
851/*
852 *	Guest doorbell interrupt
853 *	This general exception use GSRRx save/restore registers
854 */
855	START_EXCEPTION(guest_doorbell);
856	GDBELL_EXCEPTION_PROLOG(0x2c0, BOOKE_INTERRUPT_GUEST_DBELL,
857			        PROLOG_ADDITION_NONE)
858	EXCEPTION_COMMON(0x2c0)
859	addi	r3,r1,STACK_FRAME_OVERHEAD
860	bl	unknown_exception
861	b	interrupt_return
862
863/* Guest Doorbell critical Interrupt */
864	START_EXCEPTION(guest_doorbell_crit);
865	CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT,
866			      PROLOG_ADDITION_NONE)
867	EXCEPTION_COMMON_CRIT(0x2e0)
868	bl	special_reg_save
869	CHECK_NAPPING();
870	addi	r3,r1,STACK_FRAME_OVERHEAD
871	bl	unknown_nmi_exception
872	b	ret_from_crit_except
873
874/* Hypervisor call */
875	START_EXCEPTION(hypercall);
876	NORMAL_EXCEPTION_PROLOG(0x310, BOOKE_INTERRUPT_HV_SYSCALL,
877			        PROLOG_ADDITION_NONE)
878	EXCEPTION_COMMON(0x310)
879	addi	r3,r1,STACK_FRAME_OVERHEAD
880	bl	unknown_exception
881	b	interrupt_return
882
883/* Embedded Hypervisor priviledged  */
884	START_EXCEPTION(ehpriv);
885	NORMAL_EXCEPTION_PROLOG(0x320, BOOKE_INTERRUPT_HV_PRIV,
886			        PROLOG_ADDITION_NONE)
887	EXCEPTION_COMMON(0x320)
888	addi	r3,r1,STACK_FRAME_OVERHEAD
889	bl	unknown_exception
890	b	interrupt_return
891
892/* LRAT Error interrupt */
893	START_EXCEPTION(lrat_error);
894	NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR,
895			        PROLOG_ADDITION_NONE)
896	EXCEPTION_COMMON(0x340)
897	addi	r3,r1,STACK_FRAME_OVERHEAD
898	bl	unknown_exception
899	b	interrupt_return
900
901.macro SEARCH_RESTART_TABLE
902#ifdef CONFIG_RELOCATABLE
903	ld	r11,PACATOC(r13)
904	ld	r14,__start___restart_table@got(r11)
905	ld	r15,__stop___restart_table@got(r11)
906#else
907	LOAD_REG_IMMEDIATE_SYM(r14, r11, __start___restart_table)
908	LOAD_REG_IMMEDIATE_SYM(r15, r11, __stop___restart_table)
909#endif
910300:
911	cmpd	r14,r15
912	beq	302f
913	ld	r11,0(r14)
914	cmpld	r10,r11
915	blt	301f
916	ld	r11,8(r14)
917	cmpld	r10,r11
918	bge	301f
919	ld	r11,16(r14)
920	b	303f
921301:
922	addi	r14,r14,24
923	b	300b
924302:
925	li	r11,0
926303:
927.endm
928
929/*
930 * An interrupt came in while soft-disabled; We mark paca->irq_happened
931 * accordingly and if the interrupt is level sensitive, we hard disable
932 * hard disable (full_mask) corresponds to PACA_IRQ_MUST_HARD_MASK, so
933 * keep these in synch.
934 */
935
936.macro masked_interrupt_book3e paca_irq full_mask
937	std	r14,PACA_EXGEN+EX_R14(r13)
938	std	r15,PACA_EXGEN+EX_R15(r13)
939
940	lbz	r10,PACAIRQHAPPENED(r13)
941	.if \full_mask == 1
942	ori	r10,r10,\paca_irq | PACA_IRQ_HARD_DIS
943	.else
944	ori	r10,r10,\paca_irq
945	.endif
946	stb	r10,PACAIRQHAPPENED(r13)
947
948	.if \full_mask == 1
949	xori	r11,r11,MSR_EE		/* clear MSR_EE */
950	mtspr	SPRN_SRR1,r11
951	.endif
952
953	mfspr	r10,SPRN_SRR0
954	SEARCH_RESTART_TABLE
955	cmpdi	r11,0
956	beq	1f
957	mtspr	SPRN_SRR0,r11		/* return to restart address */
9581:
959
960	lwz	r11,PACA_EXGEN+EX_CR(r13)
961	mtcr	r11
962	ld	r10,PACA_EXGEN+EX_R10(r13)
963	ld	r11,PACA_EXGEN+EX_R11(r13)
964	ld	r14,PACA_EXGEN+EX_R14(r13)
965	ld	r15,PACA_EXGEN+EX_R15(r13)
966	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
967	rfi
968	b	.
969.endm
970
971masked_interrupt_book3e_0x500:
972	masked_interrupt_book3e PACA_IRQ_EE 1
973
974masked_interrupt_book3e_0x900:
975	ACK_DEC(r10);
976	masked_interrupt_book3e PACA_IRQ_DEC 0
977
978masked_interrupt_book3e_0x980:
979	ACK_FIT(r10);
980	masked_interrupt_book3e PACA_IRQ_DEC 0
981
982masked_interrupt_book3e_0x280:
983masked_interrupt_book3e_0x2c0:
984	masked_interrupt_book3e PACA_IRQ_DBELL 0
985
986/*
987 * This is called from 0x300 and 0x400 handlers after the prologs with
988 * r14 and r15 containing the fault address and error code, with the
989 * original values stashed away in the PACA
990 */
991storage_fault_common:
992	addi	r3,r1,STACK_FRAME_OVERHEAD
993	bl	do_page_fault
994	b	interrupt_return
995
996/*
997 * Alignment exception doesn't fit entirely in the 0x100 bytes so it
998 * continues here.
999 */
1000alignment_more:
1001	addi	r3,r1,STACK_FRAME_OVERHEAD
1002	bl	alignment_exception
1003	REST_NVGPRS(r1)
1004	b	interrupt_return
1005
1006/*
1007 * Trampolines used when spotting a bad kernel stack pointer in
1008 * the exception entry code.
1009 *
1010 * TODO: move some bits like SRR0 read to trampoline, pass PACA
1011 * index around, etc... to handle crit & mcheck
1012 */
1013BAD_STACK_TRAMPOLINE(0x000)
1014BAD_STACK_TRAMPOLINE(0x100)
1015BAD_STACK_TRAMPOLINE(0x200)
1016BAD_STACK_TRAMPOLINE(0x220)
1017BAD_STACK_TRAMPOLINE(0x260)
1018BAD_STACK_TRAMPOLINE(0x280)
1019BAD_STACK_TRAMPOLINE(0x2a0)
1020BAD_STACK_TRAMPOLINE(0x2c0)
1021BAD_STACK_TRAMPOLINE(0x2e0)
1022BAD_STACK_TRAMPOLINE(0x300)
1023BAD_STACK_TRAMPOLINE(0x310)
1024BAD_STACK_TRAMPOLINE(0x320)
1025BAD_STACK_TRAMPOLINE(0x340)
1026BAD_STACK_TRAMPOLINE(0x400)
1027BAD_STACK_TRAMPOLINE(0x500)
1028BAD_STACK_TRAMPOLINE(0x600)
1029BAD_STACK_TRAMPOLINE(0x700)
1030BAD_STACK_TRAMPOLINE(0x800)
1031BAD_STACK_TRAMPOLINE(0x900)
1032BAD_STACK_TRAMPOLINE(0x980)
1033BAD_STACK_TRAMPOLINE(0x9f0)
1034BAD_STACK_TRAMPOLINE(0xa00)
1035BAD_STACK_TRAMPOLINE(0xb00)
1036BAD_STACK_TRAMPOLINE(0xc00)
1037BAD_STACK_TRAMPOLINE(0xd00)
1038BAD_STACK_TRAMPOLINE(0xd08)
1039BAD_STACK_TRAMPOLINE(0xe00)
1040BAD_STACK_TRAMPOLINE(0xf00)
1041BAD_STACK_TRAMPOLINE(0xf20)
1042
1043	.globl	bad_stack_book3e
1044bad_stack_book3e:
1045	/* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
1046	mfspr	r10,SPRN_SRR0;		  /* read SRR0 before touching stack */
1047	ld	r1,PACAEMERGSP(r13)
1048	subi	r1,r1,64+INT_FRAME_SIZE
1049	std	r10,_NIP(r1)
1050	std	r11,_MSR(r1)
1051	ld	r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
1052	lwz	r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
1053	std	r10,GPR1(r1)
1054	std	r11,_CCR(r1)
1055	mfspr	r10,SPRN_DEAR
1056	mfspr	r11,SPRN_ESR
1057	std	r10,_DEAR(r1)
1058	std	r11,_ESR(r1)
1059	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
1060	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
1061	SAVE_GPRS(3, 9, r1);		/* save r3 - r9 in stackframe */    \
1062	ld	r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */		    \
1063	ld	r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */		    \
1064	mfspr	r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
1065	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
1066	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
1067	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
1068	std	r5,GPR13(r1);		/* save it to stackframe */	    \
1069	mflr	r10
1070	mfctr	r11
1071	mfxer	r12
1072	std	r10,_LINK(r1)
1073	std	r11,_CTR(r1)
1074	std	r12,_XER(r1)
1075	SAVE_GPRS(14, 31, r1)
1076	lhz	r12,PACA_TRAP_SAVE(r13)
1077	std	r12,_TRAP(r1)
1078	addi	r11,r1,INT_FRAME_SIZE
1079	std	r11,0(r1)
1080	li	r12,0
1081	std	r12,0(r11)
1082	ld	r2,PACATOC(r13)
10831:	addi	r3,r1,STACK_FRAME_OVERHEAD
1084	bl	kernel_bad_stack
1085	b	1b
1086
1087/*
1088 * Setup the initial TLB for a core. This current implementation
1089 * assume that whatever we are running off will not conflict with
1090 * the new mapping at PAGE_OFFSET.
1091 */
1092_GLOBAL(initial_tlb_book3e)
1093
1094	/* Look for the first TLB with IPROT set */
1095	mfspr	r4,SPRN_TLB0CFG
1096	andi.	r3,r4,TLBnCFG_IPROT
1097	lis	r3,MAS0_TLBSEL(0)@h
1098	bne	found_iprot
1099
1100	mfspr	r4,SPRN_TLB1CFG
1101	andi.	r3,r4,TLBnCFG_IPROT
1102	lis	r3,MAS0_TLBSEL(1)@h
1103	bne	found_iprot
1104
1105	mfspr	r4,SPRN_TLB2CFG
1106	andi.	r3,r4,TLBnCFG_IPROT
1107	lis	r3,MAS0_TLBSEL(2)@h
1108	bne	found_iprot
1109
1110	lis	r3,MAS0_TLBSEL(3)@h
1111	mfspr	r4,SPRN_TLB3CFG
1112	/* fall through */
1113
1114found_iprot:
1115	andi.	r5,r4,TLBnCFG_HES
1116	bne	have_hes
1117
1118	mflr	r8				/* save LR */
1119/* 1. Find the index of the entry we're executing in
1120 *
1121 * r3 = MAS0_TLBSEL (for the iprot array)
1122 * r4 = SPRN_TLBnCFG
1123 */
1124	bcl	20,31,$+4			/* Find our address */
1125invstr:	mflr	r6				/* Make it accessible */
1126	mfmsr	r7
1127	rlwinm	r5,r7,27,31,31			/* extract MSR[IS] */
1128	mfspr	r7,SPRN_PID
1129	slwi	r7,r7,16
1130	or	r7,r7,r5
1131	mtspr	SPRN_MAS6,r7
1132	tlbsx	0,r6				/* search MSR[IS], SPID=PID */
1133
1134	mfspr	r3,SPRN_MAS0
1135	rlwinm	r5,r3,16,20,31			/* Extract MAS0(Entry) */
1136
1137	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
1138	oris	r7,r7,MAS1_IPROT@h
1139	mtspr	SPRN_MAS1,r7
1140	tlbwe
1141
1142/* 2. Invalidate all entries except the entry we're executing in
1143 *
1144 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1145 * r4 = SPRN_TLBnCFG
1146 * r5 = ESEL of entry we are running in
1147 */
1148	andi.	r4,r4,TLBnCFG_N_ENTRY		/* Extract # entries */
1149	li	r6,0				/* Set Entry counter to 0 */
11501:	mr	r7,r3				/* Set MAS0(TLBSEL) */
1151	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
1152	mtspr	SPRN_MAS0,r7
1153	tlbre
1154	mfspr	r7,SPRN_MAS1
1155	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
1156	cmpw	r5,r6
1157	beq	skpinv				/* Dont update the current execution TLB */
1158	mtspr	SPRN_MAS1,r7
1159	tlbwe
1160	isync
1161skpinv:	addi	r6,r6,1				/* Increment */
1162	cmpw	r6,r4				/* Are we done? */
1163	bne	1b				/* If not, repeat */
1164
1165	/* Invalidate all TLBs */
1166	PPC_TLBILX_ALL(0,R0)
1167	sync
1168	isync
1169
1170/* 3. Setup a temp mapping and jump to it
1171 *
1172 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1173 * r5 = ESEL of entry we are running in
1174 */
1175	andi.	r7,r5,0x1	/* Find an entry not used and is non-zero */
1176	addi	r7,r7,0x1
1177	mr	r4,r3		/* Set MAS0(TLBSEL) = 1 */
1178	mtspr	SPRN_MAS0,r4
1179	tlbre
1180
1181	rlwimi	r4,r7,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r7) */
1182	mtspr	SPRN_MAS0,r4
1183
1184	mfspr	r7,SPRN_MAS1
1185	xori	r6,r7,MAS1_TS		/* Setup TMP mapping in the other Address space */
1186	mtspr	SPRN_MAS1,r6
1187
1188	tlbwe
1189
1190	mfmsr	r6
1191	xori	r6,r6,MSR_IS
1192	mtspr	SPRN_SRR1,r6
1193	bcl	20,31,$+4	/* Find our address */
11941:	mflr	r6
1195	addi	r6,r6,(2f - 1b)
1196	mtspr	SPRN_SRR0,r6
1197	rfi
11982:
1199
1200/* 4. Clear out PIDs & Search info
1201 *
1202 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1203 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1204 * r5 = MAS3
1205 */
1206	li	r6,0
1207	mtspr   SPRN_MAS6,r6
1208	mtspr	SPRN_PID,r6
1209
1210/* 5. Invalidate mapping we started in
1211 *
1212 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1213 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1214 * r5 = MAS3
1215 */
1216	mtspr	SPRN_MAS0,r3
1217	tlbre
1218	mfspr	r6,SPRN_MAS1
1219	rlwinm	r6,r6,0,2,31	/* clear IPROT and VALID */
1220	mtspr	SPRN_MAS1,r6
1221	tlbwe
1222	sync
1223	isync
1224
1225/* 6. Setup KERNELBASE mapping in TLB[0]
1226 *
1227 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1228 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1229 * r5 = MAS3
1230 */
1231	rlwinm	r3,r3,0,16,3	/* clear ESEL */
1232	mtspr	SPRN_MAS0,r3
1233	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
1234	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
1235	mtspr	SPRN_MAS1,r6
1236
1237	LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | MAS2_M_IF_NEEDED)
1238	mtspr	SPRN_MAS2,r6
1239
1240	rlwinm	r5,r5,0,0,25
1241	ori	r5,r5,MAS3_SR | MAS3_SW | MAS3_SX
1242	mtspr	SPRN_MAS3,r5
1243	li	r5,-1
1244	rlwinm	r5,r5,0,0,25
1245
1246	tlbwe
1247
1248/* 7. Jump to KERNELBASE mapping
1249 *
1250 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1251 */
1252	/* Now we branch the new virtual address mapped by this entry */
1253	bcl	20,31,$+4	/* Find our address */
12541:	mflr	r6
1255	addi	r6,r6,(2f - 1b)
1256	tovirt(r6,r6)
1257	lis	r7,MSR_KERNEL@h
1258	ori	r7,r7,MSR_KERNEL@l
1259	mtspr	SPRN_SRR0,r6
1260	mtspr	SPRN_SRR1,r7
1261	rfi				/* start execution out of TLB1[0] entry */
12622:
1263
1264/* 8. Clear out the temp mapping
1265 *
1266 * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1267 */
1268	mtspr	SPRN_MAS0,r4
1269	tlbre
1270	mfspr	r5,SPRN_MAS1
1271	rlwinm	r5,r5,0,2,31	/* clear IPROT and VALID */
1272	mtspr	SPRN_MAS1,r5
1273	tlbwe
1274	sync
1275	isync
1276
1277	/* We translate LR and return */
1278	tovirt(r8,r8)
1279	mtlr	r8
1280	blr
1281
1282have_hes:
1283	/* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
1284	 * kernel linear mapping. We also set MAS8 once for all here though
1285	 * that will have to be made dependent on whether we are running under
1286	 * a hypervisor I suppose.
1287	 */
1288
1289	/* BEWARE, MAGIC
1290	 * This code is called as an ordinary function on the boot CPU. But to
1291	 * avoid duplication, this code is also used in SCOM bringup of
1292	 * secondary CPUs. We read the code between the initial_tlb_code_start
1293	 * and initial_tlb_code_end labels one instruction at a time and RAM it
1294	 * into the new core via SCOM. That doesn't process branches, so there
1295	 * must be none between those two labels. It also means if this code
1296	 * ever takes any parameters, the SCOM code must also be updated to
1297	 * provide them.
1298	 */
1299	.globl a2_tlbinit_code_start
1300a2_tlbinit_code_start:
1301
1302	ori	r11,r3,MAS0_WQ_ALLWAYS
1303	oris	r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
1304	mtspr	SPRN_MAS0,r11
1305	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
1306	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
1307	mtspr	SPRN_MAS1,r3
1308	LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
1309	mtspr	SPRN_MAS2,r3
1310	li	r3,MAS3_SR | MAS3_SW | MAS3_SX
1311	mtspr	SPRN_MAS7_MAS3,r3
1312	li	r3,0
1313	mtspr	SPRN_MAS8,r3
1314
1315	/* Write the TLB entry */
1316	tlbwe
1317
1318	.globl a2_tlbinit_after_linear_map
1319a2_tlbinit_after_linear_map:
1320
1321	/* Now we branch the new virtual address mapped by this entry */
1322#ifdef CONFIG_RELOCATABLE
1323	ld	r5,PACATOC(r13)
1324	ld	r3,1f@got(r5)
1325#else
1326	LOAD_REG_IMMEDIATE_SYM(r3, r5, 1f)
1327#endif
1328	mtctr	r3
1329	bctr
1330
13311:	/* We are now running at PAGE_OFFSET, clean the TLB of everything
1332	 * else (including IPROTed things left by firmware)
1333	 * r4 = TLBnCFG
1334	 * r3 = current address (more or less)
1335	 */
1336
1337	li	r5,0
1338	mtspr	SPRN_MAS6,r5
1339	tlbsx	0,r3
1340
1341	rlwinm	r9,r4,0,TLBnCFG_N_ENTRY
1342	rlwinm	r10,r4,8,0xff
1343	addi	r10,r10,-1	/* Get inner loop mask */
1344
1345	li	r3,1
1346
1347	mfspr	r5,SPRN_MAS1
1348	rlwinm	r5,r5,0,(~(MAS1_VALID|MAS1_IPROT))
1349
1350	mfspr	r6,SPRN_MAS2
1351	rldicr	r6,r6,0,51		/* Extract EPN */
1352
1353	mfspr	r7,SPRN_MAS0
1354	rlwinm	r7,r7,0,0xffff0fff	/* Clear HES and WQ */
1355
1356	rlwinm	r8,r7,16,0xfff		/* Extract ESEL */
1357
13582:	add	r4,r3,r8
1359	and	r4,r4,r10
1360
1361	rlwimi	r7,r4,16,MAS0_ESEL_MASK
1362
1363	mtspr	SPRN_MAS0,r7
1364	mtspr	SPRN_MAS1,r5
1365	mtspr	SPRN_MAS2,r6
1366	tlbwe
1367
1368	addi	r3,r3,1
1369	and.	r4,r3,r10
1370
1371	bne	3f
1372	addis	r6,r6,(1<<30)@h
13733:
1374	cmpw	r3,r9
1375	blt	2b
1376
1377	.globl  a2_tlbinit_after_iprot_flush
1378a2_tlbinit_after_iprot_flush:
1379
1380	PPC_TLBILX(0,0,R0)
1381	sync
1382	isync
1383
1384	.globl a2_tlbinit_code_end
1385a2_tlbinit_code_end:
1386
1387	/* We translate LR and return */
1388	mflr	r3
1389	tovirt(r3,r3)
1390	mtlr	r3
1391	blr
1392
1393/*
1394 * Main entry (boot CPU, thread 0)
1395 *
1396 * We enter here from head_64.S, possibly after the prom_init trampoline
1397 * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
1398 * mode. Anything else is as it was left by the bootloader
1399 *
1400 * Initial requirements of this port:
1401 *
1402 * - Kernel loaded at 0 physical
1403 * - A good lump of memory mapped 0:0 by UTLB entry 0
1404 * - MSR:IS & MSR:DS set to 0
1405 *
1406 * Note that some of the above requirements will be relaxed in the future
1407 * as the kernel becomes smarter at dealing with different initial conditions
1408 * but for now you have to be careful
1409 */
1410_GLOBAL(start_initialization_book3e)
1411	mflr	r28
1412
1413	/* First, we need to setup some initial TLBs to map the kernel
1414	 * text, data and bss at PAGE_OFFSET. We don't have a real mode
1415	 * and always use AS 0, so we just set it up to match our link
1416	 * address and never use 0 based addresses.
1417	 */
1418	bl	initial_tlb_book3e
1419
1420	/* Init global core bits */
1421	bl	init_core_book3e
1422
1423	/* Init per-thread bits */
1424	bl	init_thread_book3e
1425
1426	/* Return to common init code */
1427	tovirt(r28,r28)
1428	mtlr	r28
1429	blr
1430
1431
1432/*
1433 * Secondary core/processor entry
1434 *
1435 * This is entered for thread 0 of a secondary core, all other threads
1436 * are expected to be stopped. It's similar to start_initialization_book3e
1437 * except that it's generally entered from the holding loop in head_64.S
1438 * after CPUs have been gathered by Open Firmware.
1439 *
1440 * We assume we are in 32 bits mode running with whatever TLB entry was
1441 * set for us by the firmware or POR engine.
1442 */
1443_GLOBAL(book3e_secondary_core_init_tlb_set)
1444	li	r4,1
1445	b	generic_secondary_smp_init
1446
1447_GLOBAL(book3e_secondary_core_init)
1448	mflr	r28
1449
1450	/* Do we need to setup initial TLB entry ? */
1451	cmplwi	r4,0
1452	bne	2f
1453
1454	/* Setup TLB for this core */
1455	bl	initial_tlb_book3e
1456
1457	/* We can return from the above running at a different
1458	 * address, so recalculate r2 (TOC)
1459	 */
1460	bl	relative_toc
1461
1462	/* Init global core bits */
14632:	bl	init_core_book3e
1464
1465	/* Init per-thread bits */
14663:	bl	init_thread_book3e
1467
1468	/* Return to common init code at proper virtual address.
1469	 *
1470	 * Due to various previous assumptions, we know we entered this
1471	 * function at either the final PAGE_OFFSET mapping or using a
1472	 * 1:1 mapping at 0, so we don't bother doing a complicated check
1473	 * here, we just ensure the return address has the right top bits.
1474	 *
1475	 * Note that if we ever want to be smarter about where we can be
1476	 * started from, we have to be careful that by the time we reach
1477	 * the code below we may already be running at a different location
1478	 * than the one we were called from since initial_tlb_book3e can
1479	 * have moved us already.
1480	 */
1481	cmpdi	cr0,r28,0
1482	blt	1f
1483	lis	r3,PAGE_OFFSET@highest
1484	sldi	r3,r3,32
1485	or	r28,r28,r3
14861:	mtlr	r28
1487	blr
1488
1489_GLOBAL(book3e_secondary_thread_init)
1490	mflr	r28
1491	b	3b
1492
1493	.globl init_core_book3e
1494init_core_book3e:
1495	/* Establish the interrupt vector base */
1496	tovirt(r2,r2)
1497	LOAD_REG_ADDR(r3, interrupt_base_book3e)
1498	mtspr	SPRN_IVPR,r3
1499	sync
1500	blr
1501
1502init_thread_book3e:
1503	lis	r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
1504	mtspr	SPRN_EPCR,r3
1505
1506	/* Make sure interrupts are off */
1507	wrteei	0
1508
1509	/* disable all timers and clear out status */
1510	li	r3,0
1511	mtspr	SPRN_TCR,r3
1512	mfspr	r3,SPRN_TSR
1513	mtspr	SPRN_TSR,r3
1514
1515	blr
1516
1517_GLOBAL(__setup_base_ivors)
1518	SET_IVOR(0, 0x020) /* Critical Input */
1519	SET_IVOR(1, 0x000) /* Machine Check */
1520	SET_IVOR(2, 0x060) /* Data Storage */
1521	SET_IVOR(3, 0x080) /* Instruction Storage */
1522	SET_IVOR(4, 0x0a0) /* External Input */
1523	SET_IVOR(5, 0x0c0) /* Alignment */
1524	SET_IVOR(6, 0x0e0) /* Program */
1525	SET_IVOR(7, 0x100) /* FP Unavailable */
1526	SET_IVOR(8, 0x120) /* System Call */
1527	SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
1528	SET_IVOR(10, 0x160) /* Decrementer */
1529	SET_IVOR(11, 0x180) /* Fixed Interval Timer */
1530	SET_IVOR(12, 0x1a0) /* Watchdog Timer */
1531	SET_IVOR(13, 0x1c0) /* Data TLB Error */
1532	SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
1533	SET_IVOR(15, 0x040) /* Debug */
1534
1535	sync
1536
1537	blr
1538
1539_GLOBAL(setup_altivec_ivors)
1540	SET_IVOR(32, 0x200) /* AltiVec Unavailable */
1541	SET_IVOR(33, 0x220) /* AltiVec Assist */
1542	blr
1543
1544_GLOBAL(setup_perfmon_ivor)
1545	SET_IVOR(35, 0x260) /* Performance Monitor */
1546	blr
1547
1548_GLOBAL(setup_doorbell_ivors)
1549	SET_IVOR(36, 0x280) /* Processor Doorbell */
1550	SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
1551	blr
1552
1553_GLOBAL(setup_ehv_ivors)
1554	SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
1555	SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
1556	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
1557	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
1558	blr
1559
1560_GLOBAL(setup_lrat_ivor)
1561	SET_IVOR(42, 0x340) /* LRAT Error */
1562	blr
1563