1 /* 2 * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. 3 */ 4 #ifndef _ASM_POWERPC_PPC_ASM_H 5 #define _ASM_POWERPC_PPC_ASM_H 6 7 #include <linux/stringify.h> 8 #include <asm/asm-compat.h> 9 #include <asm/processor.h> 10 #include <asm/ppc-opcode.h> 11 #include <asm/firmware.h> 12 #include <asm/feature-fixups.h> 13 #include <asm/extable.h> 14 15 #ifdef __ASSEMBLY__ 16 17 #define SZL (BITS_PER_LONG/8) 18 19 /* 20 * This expands to a sequence of operations with reg incrementing from 21 * start to end inclusive, of this form: 22 * 23 * op reg, (offset + (width * reg))(base) 24 * 25 * Note that offset is not the offset of the first operation unless start 26 * is zero (or width is zero). 27 */ 28 .macro OP_REGS op, width, start, end, base, offset 29 .Lreg=\start 30 .rept (\end - \start + 1) 31 \op .Lreg, \offset + \width * .Lreg(\base) 32 .Lreg=.Lreg+1 33 .endr 34 .endm 35 36 /* 37 * This expands to a sequence of register clears for regs start to end 38 * inclusive, of the form: 39 * 40 * li rN, 0 41 */ 42 .macro ZEROIZE_REGS start, end 43 .Lreg=\start 44 .rept (\end - \start + 1) 45 li .Lreg, 0 46 .Lreg=.Lreg+1 47 .endr 48 .endm 49 50 /* 51 * Macros for storing registers into and loading registers from 52 * exception frames. 53 */ 54 #ifdef __powerpc64__ 55 #define SAVE_GPRS(start, end, base) OP_REGS std, 8, start, end, base, GPR0 56 #define REST_GPRS(start, end, base) OP_REGS ld, 8, start, end, base, GPR0 57 #define SAVE_NVGPRS(base) SAVE_GPRS(14, 31, base) 58 #define REST_NVGPRS(base) REST_GPRS(14, 31, base) 59 #else 60 #define SAVE_GPRS(start, end, base) OP_REGS stw, 4, start, end, base, GPR0 61 #define REST_GPRS(start, end, base) OP_REGS lwz, 4, start, end, base, GPR0 62 #define SAVE_NVGPRS(base) SAVE_GPRS(13, 31, base) 63 #define REST_NVGPRS(base) REST_GPRS(13, 31, base) 64 #endif 65 66 #define ZEROIZE_GPRS(start, end) ZEROIZE_REGS start, end 67 #ifdef __powerpc64__ 68 #define ZEROIZE_NVGPRS() ZEROIZE_GPRS(14, 31) 69 #else 70 #define ZEROIZE_NVGPRS() ZEROIZE_GPRS(13, 31) 71 #endif 72 #define ZEROIZE_GPR(n) ZEROIZE_GPRS(n, n) 73 74 #define SAVE_GPR(n, base) SAVE_GPRS(n, n, base) 75 #define REST_GPR(n, base) REST_GPRS(n, n, base) 76 77 /* macros for handling user register sanitisation */ 78 #ifdef CONFIG_INTERRUPT_SANITIZE_REGISTERS 79 #define SANITIZE_SYSCALL_GPRS() ZEROIZE_GPR(0); \ 80 ZEROIZE_GPRS(5, 12); \ 81 ZEROIZE_NVGPRS() 82 #define SANITIZE_GPR(n) ZEROIZE_GPR(n) 83 #define SANITIZE_GPRS(start, end) ZEROIZE_GPRS(start, end) 84 #define SANITIZE_NVGPRS() ZEROIZE_NVGPRS() 85 #define SANITIZE_RESTORE_NVGPRS() REST_NVGPRS(r1) 86 #define HANDLER_RESTORE_NVGPRS() 87 #else 88 #define SANITIZE_SYSCALL_GPRS() 89 #define SANITIZE_GPR(n) 90 #define SANITIZE_GPRS(start, end) 91 #define SANITIZE_NVGPRS() 92 #define SANITIZE_RESTORE_NVGPRS() 93 #define HANDLER_RESTORE_NVGPRS() REST_NVGPRS(r1) 94 #endif /* CONFIG_INTERRUPT_SANITIZE_REGISTERS */ 95 96 #define SAVE_FPR(n, base) stfd n,8*TS_FPRWIDTH*(n)(base) 97 #define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) 98 #define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) 99 #define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) 100 #define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) 101 #define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) 102 #define REST_FPR(n, base) lfd n,8*TS_FPRWIDTH*(n)(base) 103 #define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) 104 #define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) 105 #define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) 106 #define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) 107 #define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) 108 109 #define SAVE_VR(n,b,base) li b,16*(n); stvx n,base,b 110 #define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) 111 #define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) 112 #define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) 113 #define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) 114 #define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) 115 #define REST_VR(n,b,base) li b,16*(n); lvx n,base,b 116 #define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) 117 #define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) 118 #define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) 119 #define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) 120 #define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) 121 122 #ifdef __BIG_ENDIAN__ 123 #define STXVD2X_ROT(n,b,base) STXVD2X(n,b,base) 124 #define LXVD2X_ROT(n,b,base) LXVD2X(n,b,base) 125 #else 126 #define STXVD2X_ROT(n,b,base) XXSWAPD(n,n); \ 127 STXVD2X(n,b,base); \ 128 XXSWAPD(n,n) 129 130 #define LXVD2X_ROT(n,b,base) LXVD2X(n,b,base); \ 131 XXSWAPD(n,n) 132 #endif 133 /* Save the lower 32 VSRs in the thread VSR region */ 134 #define SAVE_VSR(n,b,base) li b,16*(n); STXVD2X_ROT(n,R##base,R##b) 135 #define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) 136 #define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) 137 #define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) 138 #define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) 139 #define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) 140 #define REST_VSR(n,b,base) li b,16*(n); LXVD2X_ROT(n,R##base,R##b) 141 #define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) 142 #define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) 143 #define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) 144 #define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) 145 #define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) 146 147 /* 148 * b = base register for addressing, o = base offset from register of 1st EVR 149 * n = first EVR, s = scratch 150 */ 151 #define SAVE_EVR(n,s,b,o) evmergehi s,s,n; stw s,o+4*(n)(b) 152 #define SAVE_2EVRS(n,s,b,o) SAVE_EVR(n,s,b,o); SAVE_EVR(n+1,s,b,o) 153 #define SAVE_4EVRS(n,s,b,o) SAVE_2EVRS(n,s,b,o); SAVE_2EVRS(n+2,s,b,o) 154 #define SAVE_8EVRS(n,s,b,o) SAVE_4EVRS(n,s,b,o); SAVE_4EVRS(n+4,s,b,o) 155 #define SAVE_16EVRS(n,s,b,o) SAVE_8EVRS(n,s,b,o); SAVE_8EVRS(n+8,s,b,o) 156 #define SAVE_32EVRS(n,s,b,o) SAVE_16EVRS(n,s,b,o); SAVE_16EVRS(n+16,s,b,o) 157 #define REST_EVR(n,s,b,o) lwz s,o+4*(n)(b); evmergelo n,s,n 158 #define REST_2EVRS(n,s,b,o) REST_EVR(n,s,b,o); REST_EVR(n+1,s,b,o) 159 #define REST_4EVRS(n,s,b,o) REST_2EVRS(n,s,b,o); REST_2EVRS(n+2,s,b,o) 160 #define REST_8EVRS(n,s,b,o) REST_4EVRS(n,s,b,o); REST_4EVRS(n+4,s,b,o) 161 #define REST_16EVRS(n,s,b,o) REST_8EVRS(n,s,b,o); REST_8EVRS(n+8,s,b,o) 162 #define REST_32EVRS(n,s,b,o) REST_16EVRS(n,s,b,o); REST_16EVRS(n+16,s,b,o) 163 164 /* Macros to adjust thread priority for hardware multithreading */ 165 #define HMT_VERY_LOW or 31,31,31 # very low priority 166 #define HMT_LOW or 1,1,1 167 #define HMT_MEDIUM_LOW or 6,6,6 # medium low priority 168 #define HMT_MEDIUM or 2,2,2 169 #define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority 170 #define HMT_HIGH or 3,3,3 171 #define HMT_EXTRA_HIGH or 7,7,7 # power7 only 172 173 #ifdef CONFIG_PPC64 174 #define ULONG_SIZE 8 175 #else 176 #define ULONG_SIZE 4 177 #endif 178 #define __VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE)) 179 #define VCPU_GPR(n) __VCPU_GPR(__REG_##n) 180 181 #ifdef __KERNEL__ 182 183 /* 184 * Used to name C functions called from asm 185 */ 186 #ifdef CONFIG_PPC_KERNEL_PCREL 187 #define CFUNC(name) name@notoc 188 #else 189 #define CFUNC(name) name 190 #endif 191 192 /* 193 * We use __powerpc64__ here because we want the compat VDSO to use the 32-bit 194 * version below in the else case of the ifdef. 195 */ 196 #ifdef __powerpc64__ 197 198 #define STACKFRAMESIZE 256 199 #define __STK_REG(i) (112 + ((i)-14)*8) 200 #define STK_REG(i) __STK_REG(__REG_##i) 201 202 #ifdef CONFIG_PPC64_ELF_ABI_V2 203 #define STK_GOT 24 204 #define STK_PARAM_AREA 32 205 #else 206 #define STK_GOT 40 207 #define STK_PARAM_AREA 48 208 #endif 209 210 #define __STK_PARAM(i) (STK_PARAM_AREA + ((i)-3)*8) 211 #define STK_PARAM(i) __STK_PARAM(__REG_##i) 212 213 #ifdef CONFIG_PPC64_ELF_ABI_V2 214 215 #define _GLOBAL(name) \ 216 .align 2 ; \ 217 .type name,@function; \ 218 .globl name; \ 219 name: 220 221 #ifdef CONFIG_PPC_KERNEL_PCREL 222 #define _GLOBAL_TOC _GLOBAL 223 #else 224 #define _GLOBAL_TOC(name) \ 225 .align 2 ; \ 226 .type name,@function; \ 227 .globl name; \ 228 name: \ 229 0: addis r2,r12,(.TOC.-0b)@ha; \ 230 addi r2,r2,(.TOC.-0b)@l; \ 231 .localentry name,.-name 232 #endif 233 234 #define DOTSYM(a) a 235 236 #else 237 238 #define XGLUE(a,b) a##b 239 #define GLUE(a,b) XGLUE(a,b) 240 241 #define _GLOBAL(name) \ 242 .align 2 ; \ 243 .globl name; \ 244 .globl GLUE(.,name); \ 245 .pushsection ".opd","aw"; \ 246 name: \ 247 .quad GLUE(.,name); \ 248 .quad .TOC.@tocbase; \ 249 .quad 0; \ 250 .popsection; \ 251 .type GLUE(.,name),@function; \ 252 GLUE(.,name): 253 254 #define _GLOBAL_TOC(name) _GLOBAL(name) 255 256 #define DOTSYM(a) GLUE(.,a) 257 258 #endif 259 260 #else /* 32-bit */ 261 262 #define _GLOBAL(n) \ 263 .globl n; \ 264 n: 265 266 #define _GLOBAL_TOC(name) _GLOBAL(name) 267 268 #define DOTSYM(a) a 269 270 #endif 271 272 /* 273 * __kprobes (the C annotation) puts the symbol into the .kprobes.text 274 * section, which gets emitted at the end of regular text. 275 * 276 * _ASM_NOKPROBE_SYMBOL and NOKPROBE_SYMBOL just adds the symbol to 277 * a blacklist. The former is for core kprobe functions/data, the 278 * latter is for those that incdentially must be excluded from probing 279 * and allows them to be linked at more optimal location within text. 280 */ 281 #ifdef CONFIG_KPROBES 282 #define _ASM_NOKPROBE_SYMBOL(entry) \ 283 .pushsection "_kprobe_blacklist","aw"; \ 284 PPC_LONG (entry) ; \ 285 .popsection 286 #else 287 #define _ASM_NOKPROBE_SYMBOL(entry) 288 #endif 289 290 #define FUNC_START(name) _GLOBAL(name) 291 #define FUNC_END(name) 292 293 /* 294 * LOAD_REG_IMMEDIATE(rn, expr) 295 * Loads the value of the constant expression 'expr' into register 'rn' 296 * using immediate instructions only. Use this when it's important not 297 * to reference other data (i.e. on ppc64 when the TOC pointer is not 298 * valid) and when 'expr' is a constant or absolute address. 299 * 300 * LOAD_REG_ADDR(rn, name) 301 * Loads the address of label 'name' into register 'rn'. Use this when 302 * you don't particularly need immediate instructions only, but you need 303 * the whole address in one register (e.g. it's a structure address and 304 * you want to access various offsets within it). On ppc32 this is 305 * identical to LOAD_REG_IMMEDIATE. 306 * 307 * LOAD_REG_ADDR_PIC(rn, name) 308 * Loads the address of label 'name' into register 'run'. Use this when 309 * the kernel doesn't run at the linked or relocated address. Please 310 * note that this macro will clobber the lr register. 311 * 312 * LOAD_REG_ADDRBASE(rn, name) 313 * ADDROFF(name) 314 * LOAD_REG_ADDRBASE loads part of the address of label 'name' into 315 * register 'rn'. ADDROFF(name) returns the remainder of the address as 316 * a constant expression. ADDROFF(name) is a signed expression < 16 bits 317 * in size, so is suitable for use directly as an offset in load and store 318 * instructions. Use this when loading/storing a single word or less as: 319 * LOAD_REG_ADDRBASE(rX, name) 320 * ld rY,ADDROFF(name)(rX) 321 */ 322 323 /* Be careful, this will clobber the lr register. */ 324 #define LOAD_REG_ADDR_PIC(reg, name) \ 325 bcl 20,31,$+4; \ 326 0: mflr reg; \ 327 addis reg,reg,(name - 0b)@ha; \ 328 addi reg,reg,(name - 0b)@l; 329 330 #if defined(__powerpc64__) && defined(HAVE_AS_ATHIGH) 331 #define __AS_ATHIGH high 332 #else 333 #define __AS_ATHIGH h 334 #endif 335 336 .macro __LOAD_REG_IMMEDIATE_32 r, x 337 .if (\x) >= 0x8000 || (\x) < -0x8000 338 lis \r, (\x)@__AS_ATHIGH 339 .if (\x) & 0xffff != 0 340 ori \r, \r, (\x)@l 341 .endif 342 .else 343 li \r, (\x)@l 344 .endif 345 .endm 346 347 .macro __LOAD_REG_IMMEDIATE r, x 348 .if (\x) >= 0x80000000 || (\x) < -0x80000000 349 __LOAD_REG_IMMEDIATE_32 \r, (\x) >> 32 350 sldi \r, \r, 32 351 .if (\x) & 0xffff0000 != 0 352 oris \r, \r, (\x)@__AS_ATHIGH 353 .endif 354 .if (\x) & 0xffff != 0 355 ori \r, \r, (\x)@l 356 .endif 357 .else 358 __LOAD_REG_IMMEDIATE_32 \r, \x 359 .endif 360 .endm 361 362 #ifdef __powerpc64__ 363 364 #ifdef CONFIG_PPC_KERNEL_PCREL 365 #define __LOAD_PACA_TOC(reg) \ 366 li reg,-1 367 #else 368 #define __LOAD_PACA_TOC(reg) \ 369 ld reg,PACATOC(r13) 370 #endif 371 372 #define LOAD_PACA_TOC() \ 373 __LOAD_PACA_TOC(r2) 374 375 #define LOAD_REG_IMMEDIATE(reg, expr) __LOAD_REG_IMMEDIATE reg, expr 376 377 #define LOAD_REG_IMMEDIATE_SYM(reg, tmp, expr) \ 378 lis tmp, (expr)@highest; \ 379 lis reg, (expr)@__AS_ATHIGH; \ 380 ori tmp, tmp, (expr)@higher; \ 381 ori reg, reg, (expr)@l; \ 382 rldimi reg, tmp, 32, 0 383 384 #ifdef CONFIG_PPC_KERNEL_PCREL 385 #define LOAD_REG_ADDR(reg,name) \ 386 pla reg,name@pcrel 387 388 #else 389 #define LOAD_REG_ADDR(reg,name) \ 390 addis reg,r2,name@toc@ha; \ 391 addi reg,reg,name@toc@l 392 #endif 393 394 #ifdef CONFIG_PPC_BOOK3E_64 395 /* 396 * This is used in register-constrained interrupt handlers. Not to be used 397 * by BOOK3S. ld complains with "got/toc optimization is not supported" if r2 398 * is not used for the TOC offset, so use @got(tocreg). If the interrupt 399 * handlers saved r2 instead, LOAD_REG_ADDR could be used. 400 */ 401 #define LOAD_REG_ADDR_ALTTOC(reg,tocreg,name) \ 402 ld reg,name@got(tocreg) 403 #endif 404 405 #define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name) 406 #define ADDROFF(name) 0 407 408 /* offsets for stack frame layout */ 409 #define LRSAVE 16 410 411 /* 412 * GCC stack frames follow a different pattern on 32 vs 64. This can be used 413 * to make asm frames be consistent with C. 414 */ 415 #define PPC_CREATE_STACK_FRAME(size) \ 416 mflr r0; \ 417 std r0,16(r1); \ 418 stdu r1,-(size)(r1) 419 420 #else /* 32-bit */ 421 422 #define LOAD_REG_IMMEDIATE(reg, expr) __LOAD_REG_IMMEDIATE_32 reg, expr 423 424 #define LOAD_REG_IMMEDIATE_SYM(reg,expr) \ 425 lis reg,(expr)@ha; \ 426 addi reg,reg,(expr)@l; 427 428 #define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE_SYM(reg, name) 429 430 #define LOAD_REG_ADDRBASE(reg, name) lis reg,name@ha 431 #define ADDROFF(name) name@l 432 433 /* offsets for stack frame layout */ 434 #define LRSAVE 4 435 436 #define PPC_CREATE_STACK_FRAME(size) \ 437 stwu r1,-(size)(r1); \ 438 mflr r0; \ 439 stw r0,(size+4)(r1) 440 441 #endif 442 443 /* various errata or part fixups */ 444 #if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_E500) 445 #define MFTB(dest) \ 446 90: mfspr dest, SPRN_TBRL; \ 447 BEGIN_FTR_SECTION_NESTED(96); \ 448 cmpwi dest,0; \ 449 beq- 90b; \ 450 END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) 451 #else 452 #define MFTB(dest) MFTBL(dest) 453 #endif 454 455 #ifdef CONFIG_PPC_8xx 456 #define MFTBL(dest) mftb dest 457 #define MFTBU(dest) mftbu dest 458 #else 459 #define MFTBL(dest) mfspr dest, SPRN_TBRL 460 #define MFTBU(dest) mfspr dest, SPRN_TBRU 461 #endif 462 463 #ifndef CONFIG_SMP 464 #define TLBSYNC 465 #else 466 #define TLBSYNC tlbsync; sync 467 #endif 468 469 #ifdef CONFIG_PPC64 470 #define MTOCRF(FXM, RS) \ 471 BEGIN_FTR_SECTION_NESTED(848); \ 472 mtcrf (FXM), RS; \ 473 FTR_SECTION_ELSE_NESTED(848); \ 474 mtocrf (FXM), RS; \ 475 ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848) 476 #endif 477 478 /* 479 * This instruction is not implemented on the PPC 603 or 601; however, on 480 * the 403GCX and 405GP tlbia IS defined and tlbie is not. 481 * All of these instructions exist in the 8xx, they have magical powers, 482 * and they must be used. 483 */ 484 485 #if !defined(CONFIG_44x) && !defined(CONFIG_PPC_8xx) 486 #define tlbia \ 487 li r4,1024; \ 488 mtctr r4; \ 489 lis r4,KERNELBASE@h; \ 490 .machine push; \ 491 .machine "power4"; \ 492 0: tlbie r4; \ 493 .machine pop; \ 494 addi r4,r4,0x1000; \ 495 bdnz 0b 496 #endif 497 498 499 #ifdef CONFIG_IBM440EP_ERR42 500 #define PPC440EP_ERR42 isync 501 #else 502 #define PPC440EP_ERR42 503 #endif 504 505 /* The following stops all load and store data streams associated with stream 506 * ID (ie. streams created explicitly). The embedded and server mnemonics for 507 * dcbt are different so this must only be used for server. 508 */ 509 #define DCBT_BOOK3S_STOP_ALL_STREAM_IDS(scratch) \ 510 lis scratch,0x60000000@h; \ 511 .machine push; \ 512 .machine power4; \ 513 dcbt 0,scratch,0b01010; \ 514 .machine pop; 515 516 #define DCBT_SETUP_STREAMS(from, from_parms, to, to_parms, scratch) \ 517 lis scratch,0x8000; /* GO=1 */ \ 518 clrldi scratch,scratch,32; \ 519 .machine push; \ 520 .machine power4; \ 521 /* setup read stream 0 */ \ 522 dcbt 0,from,0b01000; /* addr from */ \ 523 dcbt 0,from_parms,0b01010; /* length and depth from */ \ 524 /* setup write stream 1 */ \ 525 dcbtst 0,to,0b01000; /* addr to */ \ 526 dcbtst 0,to_parms,0b01010; /* length and depth to */ \ 527 eieio; \ 528 dcbt 0,scratch,0b01010; /* all streams GO */ \ 529 .machine pop; 530 531 /* 532 * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them 533 * keep the address intact to be compatible with code shared with 534 * 32-bit classic. 535 * 536 * On the other hand, I find it useful to have them behave as expected 537 * by their name (ie always do the addition) on 64-bit BookE 538 */ 539 #if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64) 540 #define toreal(rd) 541 #define fromreal(rd) 542 543 /* 544 * We use addis to ensure compatibility with the "classic" ppc versions of 545 * these macros, which use rs = 0 to get the tophys offset in rd, rather than 546 * converting the address in r0, and so this version has to do that too 547 * (i.e. set register rd to 0 when rs == 0). 548 */ 549 #define tophys(rd,rs) \ 550 addis rd,rs,0 551 552 #define tovirt(rd,rs) \ 553 addis rd,rs,0 554 555 #elif defined(CONFIG_PPC64) 556 #define toreal(rd) /* we can access c000... in real mode */ 557 #define fromreal(rd) 558 559 #define tophys(rd,rs) \ 560 clrldi rd,rs,2 561 562 #define tovirt(rd,rs) \ 563 rotldi rd,rs,16; \ 564 ori rd,rd,((KERNELBASE>>48)&0xFFFF);\ 565 rotldi rd,rd,48 566 #else 567 #define toreal(rd) tophys(rd,rd) 568 #define fromreal(rd) tovirt(rd,rd) 569 570 #define tophys(rd, rs) addis rd, rs, -PAGE_OFFSET@h 571 #define tovirt(rd, rs) addis rd, rs, PAGE_OFFSET@h 572 #endif 573 574 #ifdef CONFIG_PPC_BOOK3S_64 575 #define MTMSRD(r) mtmsrd r 576 #define MTMSR_EERI(reg) mtmsrd reg,1 577 #else 578 #define MTMSRD(r) mtmsr r 579 #define MTMSR_EERI(reg) mtmsr reg 580 #endif 581 582 #endif /* __KERNEL__ */ 583 584 /* The boring bits... */ 585 586 /* Condition Register Bit Fields */ 587 588 #define cr0 0 589 #define cr1 1 590 #define cr2 2 591 #define cr3 3 592 #define cr4 4 593 #define cr5 5 594 #define cr6 6 595 #define cr7 7 596 597 598 /* 599 * General Purpose Registers (GPRs) 600 * 601 * The lower case r0-r31 should be used in preference to the upper 602 * case R0-R31 as they provide more error checking in the assembler. 603 * Use R0-31 only when really nessesary. 604 */ 605 606 #define r0 %r0 607 #define r1 %r1 608 #define r2 %r2 609 #define r3 %r3 610 #define r4 %r4 611 #define r5 %r5 612 #define r6 %r6 613 #define r7 %r7 614 #define r8 %r8 615 #define r9 %r9 616 #define r10 %r10 617 #define r11 %r11 618 #define r12 %r12 619 #define r13 %r13 620 #define r14 %r14 621 #define r15 %r15 622 #define r16 %r16 623 #define r17 %r17 624 #define r18 %r18 625 #define r19 %r19 626 #define r20 %r20 627 #define r21 %r21 628 #define r22 %r22 629 #define r23 %r23 630 #define r24 %r24 631 #define r25 %r25 632 #define r26 %r26 633 #define r27 %r27 634 #define r28 %r28 635 #define r29 %r29 636 #define r30 %r30 637 #define r31 %r31 638 639 640 /* Floating Point Registers (FPRs) */ 641 642 #define fr0 0 643 #define fr1 1 644 #define fr2 2 645 #define fr3 3 646 #define fr4 4 647 #define fr5 5 648 #define fr6 6 649 #define fr7 7 650 #define fr8 8 651 #define fr9 9 652 #define fr10 10 653 #define fr11 11 654 #define fr12 12 655 #define fr13 13 656 #define fr14 14 657 #define fr15 15 658 #define fr16 16 659 #define fr17 17 660 #define fr18 18 661 #define fr19 19 662 #define fr20 20 663 #define fr21 21 664 #define fr22 22 665 #define fr23 23 666 #define fr24 24 667 #define fr25 25 668 #define fr26 26 669 #define fr27 27 670 #define fr28 28 671 #define fr29 29 672 #define fr30 30 673 #define fr31 31 674 675 /* AltiVec Registers (VPRs) */ 676 677 #define v0 0 678 #define v1 1 679 #define v2 2 680 #define v3 3 681 #define v4 4 682 #define v5 5 683 #define v6 6 684 #define v7 7 685 #define v8 8 686 #define v9 9 687 #define v10 10 688 #define v11 11 689 #define v12 12 690 #define v13 13 691 #define v14 14 692 #define v15 15 693 #define v16 16 694 #define v17 17 695 #define v18 18 696 #define v19 19 697 #define v20 20 698 #define v21 21 699 #define v22 22 700 #define v23 23 701 #define v24 24 702 #define v25 25 703 #define v26 26 704 #define v27 27 705 #define v28 28 706 #define v29 29 707 #define v30 30 708 #define v31 31 709 710 /* VSX Registers (VSRs) */ 711 712 #define vs0 0 713 #define vs1 1 714 #define vs2 2 715 #define vs3 3 716 #define vs4 4 717 #define vs5 5 718 #define vs6 6 719 #define vs7 7 720 #define vs8 8 721 #define vs9 9 722 #define vs10 10 723 #define vs11 11 724 #define vs12 12 725 #define vs13 13 726 #define vs14 14 727 #define vs15 15 728 #define vs16 16 729 #define vs17 17 730 #define vs18 18 731 #define vs19 19 732 #define vs20 20 733 #define vs21 21 734 #define vs22 22 735 #define vs23 23 736 #define vs24 24 737 #define vs25 25 738 #define vs26 26 739 #define vs27 27 740 #define vs28 28 741 #define vs29 29 742 #define vs30 30 743 #define vs31 31 744 #define vs32 32 745 #define vs33 33 746 #define vs34 34 747 #define vs35 35 748 #define vs36 36 749 #define vs37 37 750 #define vs38 38 751 #define vs39 39 752 #define vs40 40 753 #define vs41 41 754 #define vs42 42 755 #define vs43 43 756 #define vs44 44 757 #define vs45 45 758 #define vs46 46 759 #define vs47 47 760 #define vs48 48 761 #define vs49 49 762 #define vs50 50 763 #define vs51 51 764 #define vs52 52 765 #define vs53 53 766 #define vs54 54 767 #define vs55 55 768 #define vs56 56 769 #define vs57 57 770 #define vs58 58 771 #define vs59 59 772 #define vs60 60 773 #define vs61 61 774 #define vs62 62 775 #define vs63 63 776 777 /* SPE Registers (EVPRs) */ 778 779 #define evr0 0 780 #define evr1 1 781 #define evr2 2 782 #define evr3 3 783 #define evr4 4 784 #define evr5 5 785 #define evr6 6 786 #define evr7 7 787 #define evr8 8 788 #define evr9 9 789 #define evr10 10 790 #define evr11 11 791 #define evr12 12 792 #define evr13 13 793 #define evr14 14 794 #define evr15 15 795 #define evr16 16 796 #define evr17 17 797 #define evr18 18 798 #define evr19 19 799 #define evr20 20 800 #define evr21 21 801 #define evr22 22 802 #define evr23 23 803 #define evr24 24 804 #define evr25 25 805 #define evr26 26 806 #define evr27 27 807 #define evr28 28 808 #define evr29 29 809 #define evr30 30 810 #define evr31 31 811 812 #define RFSCV .long 0x4c0000a4 813 814 /* 815 * Create an endian fixup trampoline 816 * 817 * This starts with a "tdi 0,0,0x48" instruction which is 818 * essentially a "trap never", and thus akin to a nop. 819 * 820 * The opcode for this instruction read with the wrong endian 821 * however results in a b . + 8 822 * 823 * So essentially we use that trick to execute the following 824 * trampoline in "reverse endian" if we are running with the 825 * MSR_LE bit set the "wrong" way for whatever endianness the 826 * kernel is built for. 827 */ 828 829 #ifdef CONFIG_PPC_BOOK3E_64 830 #define FIXUP_ENDIAN 831 #else 832 /* 833 * This version may be used in HV or non-HV context. 834 * MSR[EE] must be disabled. 835 */ 836 #define FIXUP_ENDIAN \ 837 tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \ 838 b 191f; /* Skip trampoline if endian is good */ \ 839 .long 0xa600607d; /* mfmsr r11 */ \ 840 .long 0x01006b69; /* xori r11,r11,1 */ \ 841 .long 0x00004039; /* li r10,0 */ \ 842 .long 0x6401417d; /* mtmsrd r10,1 */ \ 843 .long 0x05009f42; /* bcl 20,31,$+4 */ \ 844 .long 0xa602487d; /* mflr r10 */ \ 845 .long 0x14004a39; /* addi r10,r10,20 */ \ 846 .long 0xa6035a7d; /* mtsrr0 r10 */ \ 847 .long 0xa6037b7d; /* mtsrr1 r11 */ \ 848 .long 0x2400004c; /* rfid */ \ 849 191: 850 851 /* 852 * This version that may only be used with MSR[HV]=1 853 * - Does not clear MSR[RI], so more robust. 854 * - Slightly smaller and faster. 855 */ 856 #define FIXUP_ENDIAN_HV \ 857 tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \ 858 b 191f; /* Skip trampoline if endian is good */ \ 859 .long 0xa600607d; /* mfmsr r11 */ \ 860 .long 0x01006b69; /* xori r11,r11,1 */ \ 861 .long 0x05009f42; /* bcl 20,31,$+4 */ \ 862 .long 0xa602487d; /* mflr r10 */ \ 863 .long 0x14004a39; /* addi r10,r10,20 */ \ 864 .long 0xa64b5a7d; /* mthsrr0 r10 */ \ 865 .long 0xa64b7b7d; /* mthsrr1 r11 */ \ 866 .long 0x2402004c; /* hrfid */ \ 867 191: 868 869 #endif /* !CONFIG_PPC_BOOK3E_64 */ 870 871 #endif /* __ASSEMBLY__ */ 872 873 #define SOFT_MASK_TABLE(_start, _end) \ 874 stringify_in_c(.section __soft_mask_table,"a";)\ 875 stringify_in_c(.balign 8;) \ 876 stringify_in_c(.llong (_start);) \ 877 stringify_in_c(.llong (_end);) \ 878 stringify_in_c(.previous) 879 880 #define RESTART_TABLE(_start, _end, _target) \ 881 stringify_in_c(.section __restart_table,"a";)\ 882 stringify_in_c(.balign 8;) \ 883 stringify_in_c(.llong (_start);) \ 884 stringify_in_c(.llong (_end);) \ 885 stringify_in_c(.llong (_target);) \ 886 stringify_in_c(.previous) 887 888 #ifdef CONFIG_PPC_E500 889 #define BTB_FLUSH(reg) \ 890 lis reg,BUCSR_INIT@h; \ 891 ori reg,reg,BUCSR_INIT@l; \ 892 mtspr SPRN_BUCSR,reg; \ 893 isync; 894 #else 895 #define BTB_FLUSH(reg) 896 #endif /* CONFIG_PPC_E500 */ 897 898 #if defined(CONFIG_PPC64_ELF_ABI_V1) 899 #define STACK_FRAME_PARAMS 48 900 #elif defined(CONFIG_PPC64_ELF_ABI_V2) 901 #define STACK_FRAME_PARAMS 32 902 #elif defined(CONFIG_PPC32) 903 #define STACK_FRAME_PARAMS 8 904 #endif 905 906 #endif /* _ASM_POWERPC_PPC_ASM_H */ 907