1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _ASM_POWERPC_BOOK3S_32_PGTABLE_H 3 #define _ASM_POWERPC_BOOK3S_32_PGTABLE_H 4 5 #include <asm-generic/pgtable-nopmd.h> 6 7 /* 8 * The "classic" 32-bit implementation of the PowerPC MMU uses a hash 9 * table containing PTEs, together with a set of 16 segment registers, 10 * to define the virtual to physical address mapping. 11 * 12 * We use the hash table as an extended TLB, i.e. a cache of currently 13 * active mappings. We maintain a two-level page table tree, much 14 * like that used by the i386, for the sake of the Linux memory 15 * management code. Low-level assembler code in hash_low_32.S 16 * (procedure hash_page) is responsible for extracting ptes from the 17 * tree and putting them into the hash table when necessary, and 18 * updating the accessed and modified bits in the page table tree. 19 */ 20 21 #define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ 22 #define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ 23 #define _PAGE_READ 0x004 /* software: read access allowed */ 24 #define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ 25 #define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ 26 #define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ 27 #define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ 28 #define _PAGE_DIRTY 0x080 /* C: page changed */ 29 #define _PAGE_ACCESSED 0x100 /* R: page referenced */ 30 #define _PAGE_EXEC 0x200 /* software: exec allowed */ 31 #define _PAGE_WRITE 0x400 /* software: user write access allowed */ 32 #define _PAGE_SPECIAL 0x800 /* software: Special page */ 33 34 #ifdef CONFIG_PTE_64BIT 35 /* We never clear the high word of the pte */ 36 #define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE) 37 #else 38 #define _PTE_NONE_MASK _PAGE_HASHPTE 39 #endif 40 41 #define _PMD_PRESENT 0 42 #define _PMD_PRESENT_MASK (PAGE_MASK) 43 #define _PMD_BAD (~PAGE_MASK) 44 45 /* We borrow the _PAGE_READ bit to store the exclusive marker in swap PTEs. */ 46 #define _PAGE_SWP_EXCLUSIVE _PAGE_READ 47 48 /* And here we include common definitions */ 49 50 #define _PAGE_HPTEFLAGS _PAGE_HASHPTE 51 52 /* 53 * Location of the PFN in the PTE. Most 32-bit platforms use the same 54 * as _PAGE_SHIFT here (ie, naturally aligned). 55 * Platform who don't just pre-define the value so we don't override it here. 56 */ 57 #define PTE_RPN_SHIFT (PAGE_SHIFT) 58 59 /* 60 * The mask covered by the RPN must be a ULL on 32-bit platforms with 61 * 64-bit PTEs. 62 */ 63 #ifdef CONFIG_PTE_64BIT 64 #define PTE_RPN_MASK (~((1ULL << PTE_RPN_SHIFT) - 1)) 65 #define MAX_POSSIBLE_PHYSMEM_BITS 36 66 #else 67 #define PTE_RPN_MASK (~((1UL << PTE_RPN_SHIFT) - 1)) 68 #define MAX_POSSIBLE_PHYSMEM_BITS 32 69 #endif 70 71 /* 72 * _PAGE_CHG_MASK masks of bits that are to be preserved across 73 * pgprot changes. 74 */ 75 #define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HASHPTE | _PAGE_DIRTY | \ 76 _PAGE_ACCESSED | _PAGE_SPECIAL) 77 78 /* 79 * We define 2 sets of base prot bits, one for basic pages (ie, 80 * cacheable kernel and user pages) and one for non cacheable 81 * pages. We always set _PAGE_COHERENT when SMP is enabled or 82 * the processor might need it for DMA coherency. 83 */ 84 #define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED) 85 #define _PAGE_BASE (_PAGE_BASE_NC | _PAGE_COHERENT) 86 87 #include <asm/pgtable-masks.h> 88 89 /* Permission masks used for kernel mappings */ 90 #define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW) 91 #define PAGE_KERNEL_NC __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | _PAGE_NO_CACHE) 92 #define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | _PAGE_NO_CACHE | _PAGE_GUARDED) 93 #define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX) 94 #define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO) 95 #define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX) 96 97 #define PTE_INDEX_SIZE PTE_SHIFT 98 #define PMD_INDEX_SIZE 0 99 #define PUD_INDEX_SIZE 0 100 #define PGD_INDEX_SIZE (32 - PGDIR_SHIFT) 101 102 #define PMD_CACHE_INDEX PMD_INDEX_SIZE 103 #define PUD_CACHE_INDEX PUD_INDEX_SIZE 104 105 #ifndef __ASSEMBLER__ 106 #define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE) 107 #define PMD_TABLE_SIZE 0 108 #define PUD_TABLE_SIZE 0 109 #define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) 110 111 /* Bits to mask out from a PMD to get to the PTE page */ 112 #define PMD_MASKED_BITS (PTE_TABLE_SIZE - 1) 113 #endif /* __ASSEMBLER__ */ 114 115 #define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) 116 #define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) 117 118 /* 119 * The normal case is that PTEs are 32-bits and we have a 1-page 120 * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus 121 * 122 * For any >32-bit physical address platform, we can use the following 123 * two level page table layout where the pgdir is 8KB and the MS 13 bits 124 * are an index to the second level table. The combined pgdir/pmd first 125 * level has 2048 entries and the second level has 512 64-bit PTE entries. 126 * -Matt 127 */ 128 /* PGDIR_SHIFT determines what a top-level page table entry can map */ 129 #define PGDIR_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) 130 #define PGDIR_SIZE (1UL << PGDIR_SHIFT) 131 #define PGDIR_MASK (~(PGDIR_SIZE-1)) 132 133 #define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) 134 135 #ifndef __ASSEMBLER__ 136 137 int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot); 138 void unmap_kernel_page(unsigned long va); 139 140 #endif /* !__ASSEMBLER__ */ 141 142 /* 143 * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary 144 * value (for now) on others, from where we can start layout kernel 145 * virtual space that goes below PKMAP and FIXMAP 146 */ 147 148 #define FIXADDR_SIZE 0 149 #ifdef CONFIG_KASAN 150 #include <asm/kasan.h> 151 #define FIXADDR_TOP (KASAN_SHADOW_START - PAGE_SIZE) 152 #else 153 #define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE)) 154 #endif 155 156 /* 157 * ioremap_bot starts at that address. Early ioremaps move down from there, 158 * until mem_init() at which point this becomes the top of the vmalloc 159 * and ioremap space 160 */ 161 #ifdef CONFIG_HIGHMEM 162 #define IOREMAP_TOP PKMAP_BASE 163 #else 164 #define IOREMAP_TOP FIXADDR_START 165 #endif 166 167 /* PPC32 shares vmalloc area with ioremap */ 168 #define IOREMAP_START VMALLOC_START 169 #define IOREMAP_END VMALLOC_END 170 171 /* 172 * Just any arbitrary offset to the start of the vmalloc VM area: the 173 * current 16MB value just means that there will be a 64MB "hole" after the 174 * physical memory until the kernel virtual memory starts. That means that 175 * any out-of-bounds memory accesses will hopefully be caught. 176 * The vmalloc() routines leaves a hole of 4kB between each vmalloced 177 * area for the same reason. ;) 178 * 179 * We no longer map larger than phys RAM with the BATs so we don't have 180 * to worry about the VMALLOC_OFFSET causing problems. We do have to worry 181 * about clashes between our early calls to ioremap() that start growing down 182 * from ioremap_base being run into the VM area allocations (growing upwards 183 * from VMALLOC_START). For this reason we have ioremap_bot to check when 184 * we actually run into our mappings setup in the early boot with the VM 185 * system. This really does become a problem for machines with good amounts 186 * of RAM. -- Cort 187 */ 188 #define VMALLOC_OFFSET (0x1000000) /* 16M */ 189 190 #define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) 191 192 #ifdef CONFIG_KASAN_VMALLOC 193 #define VMALLOC_END ALIGN_DOWN(ioremap_bot, PAGE_SIZE << KASAN_SHADOW_SCALE_SHIFT) 194 #else 195 #define VMALLOC_END ioremap_bot 196 #endif 197 198 #ifndef __ASSEMBLER__ 199 #include <linux/sched.h> 200 #include <linux/threads.h> 201 202 /* Bits to mask out from a PGD to get to the PUD page */ 203 #define PGD_MASKED_BITS 0 204 205 #define pgd_ERROR(e) \ 206 pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) 207 /* 208 * Bits in a linux-style PTE. These match the bits in the 209 * (hardware-defined) PowerPC PTE as closely as possible. 210 */ 211 212 #define pte_clear(mm, addr, ptep) \ 213 do { pte_update(mm, addr, ptep, ~_PAGE_HASHPTE, 0, 0); } while (0) 214 215 #define pmd_none(pmd) (!pmd_val(pmd)) 216 #define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD) 217 #define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK) 218 static inline void pmd_clear(pmd_t *pmdp) 219 { 220 *pmdp = __pmd(0); 221 } 222 223 224 /* 225 * When flushing the tlb entry for a page, we also need to flush the hash 226 * table entry. flush_hash_pages is assembler (for speed) in hashtable.S. 227 */ 228 extern int flush_hash_pages(unsigned context, unsigned long va, 229 unsigned long pmdval, int count); 230 231 /* Add an HPTE to the hash table */ 232 extern void add_hash_page(unsigned context, unsigned long va, 233 unsigned long pmdval); 234 235 /* Flush an entry from the TLB/hash table */ 236 static inline void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr) 237 { 238 if (mmu_has_feature(MMU_FTR_HPTE_TABLE)) { 239 unsigned long ptephys = __pa(ptep) & PAGE_MASK; 240 241 flush_hash_pages(mm->context.id, addr, ptephys, 1); 242 } 243 } 244 245 /* 246 * PTE updates. This function is called whenever an existing 247 * valid PTE is updated. This does -not- include set_pte_at() 248 * which nowadays only sets a new PTE. 249 * 250 * Depending on the type of MMU, we may need to use atomic updates 251 * and the PTE may be either 32 or 64 bit wide. In the later case, 252 * when using atomic updates, only the low part of the PTE is 253 * accessed atomically. 254 */ 255 static inline pte_basic_t pte_update(struct mm_struct *mm, unsigned long addr, pte_t *p, 256 unsigned long clr, unsigned long set, int huge) 257 { 258 pte_basic_t old; 259 260 if (mmu_has_feature(MMU_FTR_HPTE_TABLE)) { 261 unsigned long tmp; 262 263 asm volatile( 264 #ifndef CONFIG_PTE_64BIT 265 "1: lwarx %0, 0, %3\n" 266 " andc %1, %0, %4\n" 267 #else 268 "1: lwarx %L0, 0, %3\n" 269 " lwz %0, -4(%3)\n" 270 " andc %1, %L0, %4\n" 271 #endif 272 " or %1, %1, %5\n" 273 " stwcx. %1, 0, %3\n" 274 " bne- 1b" 275 : "=&r" (old), "=&r" (tmp), "=m" (*p) 276 #ifndef CONFIG_PTE_64BIT 277 : "r" (p), 278 #else 279 : "b" ((unsigned long)(p) + 4), 280 #endif 281 "r" (clr), "r" (set), "m" (*p) 282 : "cc" ); 283 } else { 284 old = pte_val(*p); 285 286 *p = __pte((old & ~(pte_basic_t)clr) | set); 287 } 288 289 return old; 290 } 291 292 /* 293 * 2.6 calls this without flushing the TLB entry; this is wrong 294 * for our hash-based implementation, we fix that up here. 295 */ 296 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG 297 static inline int __ptep_test_and_clear_young(struct mm_struct *mm, 298 unsigned long addr, pte_t *ptep) 299 { 300 unsigned long old; 301 old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0); 302 if (old & _PAGE_HASHPTE) 303 flush_hash_entry(mm, ptep, addr); 304 305 return (old & _PAGE_ACCESSED) != 0; 306 } 307 #define ptep_test_and_clear_young(__vma, __addr, __ptep) \ 308 __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep) 309 310 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR 311 static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, 312 pte_t *ptep) 313 { 314 return __pte(pte_update(mm, addr, ptep, ~_PAGE_HASHPTE, 0, 0)); 315 } 316 317 #define __HAVE_ARCH_PTEP_SET_WRPROTECT 318 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, 319 pte_t *ptep) 320 { 321 pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 0); 322 } 323 324 static inline void __ptep_set_access_flags(struct vm_area_struct *vma, 325 pte_t *ptep, pte_t entry, 326 unsigned long address, 327 int psize) 328 { 329 unsigned long set = pte_val(entry) & 330 (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); 331 332 pte_update(vma->vm_mm, address, ptep, 0, set, 0); 333 334 flush_tlb_page(vma, address); 335 } 336 337 #define __HAVE_ARCH_PTE_SAME 338 #define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) 339 340 #define pmd_pfn(pmd) (pmd_val(pmd) >> PAGE_SHIFT) 341 #define pmd_page(pmd) pfn_to_page(pmd_pfn(pmd)) 342 343 /* 344 * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that 345 * are !pte_none() && !pte_present(). 346 * 347 * Format of swap PTEs (32bit PTEs): 348 * 349 * 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 350 * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 351 * <----------------- offset --------------------> < type -> E H P 352 * 353 * E is the exclusive marker that is not stored in swap entries. 354 * _PAGE_PRESENT (P) and __PAGE_HASHPTE (H) must be 0. 355 * 356 * For 64bit PTEs, the offset is extended by 32bit. 357 */ 358 #define __swp_type(entry) ((entry).val & 0x1f) 359 #define __swp_offset(entry) ((entry).val >> 5) 360 #define __swp_entry(type, offset) ((swp_entry_t) { ((type) & 0x1f) | ((offset) << 5) }) 361 #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 }) 362 #define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 }) 363 364 static inline bool pte_swp_exclusive(pte_t pte) 365 { 366 return pte_val(pte) & _PAGE_SWP_EXCLUSIVE; 367 } 368 369 static inline pte_t pte_swp_mkexclusive(pte_t pte) 370 { 371 return __pte(pte_val(pte) | _PAGE_SWP_EXCLUSIVE); 372 } 373 374 static inline pte_t pte_swp_clear_exclusive(pte_t pte) 375 { 376 return __pte(pte_val(pte) & ~_PAGE_SWP_EXCLUSIVE); 377 } 378 379 /* Generic accessors to PTE bits */ 380 static inline bool pte_read(pte_t pte) 381 { 382 return !!(pte_val(pte) & _PAGE_READ); 383 } 384 385 static inline bool pte_write(pte_t pte) 386 { 387 return !!(pte_val(pte) & _PAGE_WRITE); 388 } 389 390 static inline int pte_dirty(pte_t pte) { return !!(pte_val(pte) & _PAGE_DIRTY); } 391 static inline int pte_young(pte_t pte) { return !!(pte_val(pte) & _PAGE_ACCESSED); } 392 static inline int pte_special(pte_t pte) { return !!(pte_val(pte) & _PAGE_SPECIAL); } 393 static inline int pte_none(pte_t pte) { return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; } 394 static inline bool pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; } 395 396 static inline int pte_present(pte_t pte) 397 { 398 return pte_val(pte) & _PAGE_PRESENT; 399 } 400 401 static inline bool pte_hw_valid(pte_t pte) 402 { 403 return pte_val(pte) & _PAGE_PRESENT; 404 } 405 406 static inline bool pte_hashpte(pte_t pte) 407 { 408 return !!(pte_val(pte) & _PAGE_HASHPTE); 409 } 410 411 static inline bool pte_ci(pte_t pte) 412 { 413 return !!(pte_val(pte) & _PAGE_NO_CACHE); 414 } 415 416 /* 417 * We only find page table entry in the last level 418 * Hence no need for other accessors 419 */ 420 #define pte_access_permitted pte_access_permitted 421 static inline bool pte_access_permitted(pte_t pte, bool write) 422 { 423 /* 424 * A read-only access is controlled by _PAGE_READ bit. 425 * We have _PAGE_READ set for WRITE 426 */ 427 if (!pte_present(pte) || !pte_read(pte)) 428 return false; 429 430 if (write && !pte_write(pte)) 431 return false; 432 433 return true; 434 } 435 436 /* Conversion functions: convert a page and protection to a page entry, 437 * and a page entry and page directory to the page they refer to. 438 * 439 * Even if PTEs can be unsigned long long, a PFN is always an unsigned 440 * long for now. 441 */ 442 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) 443 { 444 return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) | 445 pgprot_val(pgprot)); 446 } 447 448 /* Generic modifiers for PTE bits */ 449 static inline pte_t pte_wrprotect(pte_t pte) 450 { 451 return __pte(pte_val(pte) & ~_PAGE_WRITE); 452 } 453 454 static inline pte_t pte_exprotect(pte_t pte) 455 { 456 return __pte(pte_val(pte) & ~_PAGE_EXEC); 457 } 458 459 static inline pte_t pte_mkclean(pte_t pte) 460 { 461 return __pte(pte_val(pte) & ~_PAGE_DIRTY); 462 } 463 464 static inline pte_t pte_mkold(pte_t pte) 465 { 466 return __pte(pte_val(pte) & ~_PAGE_ACCESSED); 467 } 468 469 static inline pte_t pte_mkexec(pte_t pte) 470 { 471 return __pte(pte_val(pte) | _PAGE_EXEC); 472 } 473 474 static inline pte_t pte_mkpte(pte_t pte) 475 { 476 return pte; 477 } 478 479 static inline pte_t pte_mkwrite_novma(pte_t pte) 480 { 481 /* 482 * write implies read, hence set both 483 */ 484 return __pte(pte_val(pte) | _PAGE_RW); 485 } 486 487 static inline pte_t pte_mkdirty(pte_t pte) 488 { 489 return __pte(pte_val(pte) | _PAGE_DIRTY); 490 } 491 492 static inline pte_t pte_mkyoung(pte_t pte) 493 { 494 return __pte(pte_val(pte) | _PAGE_ACCESSED); 495 } 496 497 static inline pte_t pte_mkspecial(pte_t pte) 498 { 499 return __pte(pte_val(pte) | _PAGE_SPECIAL); 500 } 501 502 static inline pte_t pte_mkhuge(pte_t pte) 503 { 504 return pte; 505 } 506 507 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) 508 { 509 return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); 510 } 511 512 513 514 /* This low level function performs the actual PTE insertion 515 * Setting the PTE depends on the MMU type and other factors. 516 * 517 * First case is 32-bit in UP mode with 32-bit PTEs, we need to preserve 518 * the _PAGE_HASHPTE bit since we may not have invalidated the previous 519 * translation in the hash yet (done in a subsequent flush_tlb_xxx()) 520 * and see we need to keep track that this PTE needs invalidating. 521 * 522 * Second case is 32-bit with 64-bit PTE. In this case, we 523 * can just store as long as we do the two halves in the right order 524 * with a barrier in between. This is possible because we take care, 525 * in the hash code, to pre-invalidate if the PTE was already hashed, 526 * which synchronizes us with any concurrent invalidation. 527 * In the percpu case, we fallback to the simple update preserving 528 * the hash bits (ie, same as the non-SMP case). 529 * 530 * Third case is 32-bit in SMP mode with 32-bit PTEs. We use the 531 * helper pte_update() which does an atomic update. We need to do that 532 * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a 533 * per-CPU PTE such as a kmap_atomic, we also do a simple update preserving 534 * the hash bits instead. 535 */ 536 static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, 537 pte_t *ptep, pte_t pte, int percpu) 538 { 539 if ((!IS_ENABLED(CONFIG_SMP) && !IS_ENABLED(CONFIG_PTE_64BIT)) || percpu) { 540 *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) | 541 (pte_val(pte) & ~_PAGE_HASHPTE)); 542 } else if (IS_ENABLED(CONFIG_PTE_64BIT)) { 543 if (pte_val(*ptep) & _PAGE_HASHPTE) 544 flush_hash_entry(mm, ptep, addr); 545 546 asm volatile("stw%X0 %2,%0; eieio; stw%X1 %L2,%1" : 547 "=m" (*ptep), "=m" (*((unsigned char *)ptep+4)) : 548 "r" (pte) : "memory"); 549 } else { 550 pte_update(mm, addr, ptep, ~_PAGE_HASHPTE, pte_val(pte), 0); 551 } 552 } 553 554 /* 555 * Macro to mark a page protection value as "uncacheable". 556 */ 557 558 #define _PAGE_CACHE_CTL (_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \ 559 _PAGE_WRITETHRU) 560 561 #define pgprot_noncached pgprot_noncached 562 static inline pgprot_t pgprot_noncached(pgprot_t prot) 563 { 564 return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | 565 _PAGE_NO_CACHE | _PAGE_GUARDED); 566 } 567 568 #define pgprot_noncached_wc pgprot_noncached_wc 569 static inline pgprot_t pgprot_noncached_wc(pgprot_t prot) 570 { 571 return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | 572 _PAGE_NO_CACHE); 573 } 574 575 #define pgprot_cached pgprot_cached 576 static inline pgprot_t pgprot_cached(pgprot_t prot) 577 { 578 return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | 579 _PAGE_COHERENT); 580 } 581 582 #define pgprot_cached_wthru pgprot_cached_wthru 583 static inline pgprot_t pgprot_cached_wthru(pgprot_t prot) 584 { 585 return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | 586 _PAGE_COHERENT | _PAGE_WRITETHRU); 587 } 588 589 #define pgprot_cached_noncoherent pgprot_cached_noncoherent 590 static inline pgprot_t pgprot_cached_noncoherent(pgprot_t prot) 591 { 592 return __pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL); 593 } 594 595 #define pgprot_writecombine pgprot_writecombine 596 static inline pgprot_t pgprot_writecombine(pgprot_t prot) 597 { 598 return pgprot_noncached_wc(prot); 599 } 600 601 #endif /* !__ASSEMBLER__ */ 602 603 #endif /* _ASM_POWERPC_BOOK3S_32_PGTABLE_H */ 604