1/* 2 * MPC8315E RDB Device Tree Source 3 * 4 * Copyright 2007 Freescale Semiconductor Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 */ 11 12/dts-v1/; 13 14/ { 15 compatible = "fsl,mpc8315erdb"; 16 #address-cells = <1>; 17 #size-cells = <1>; 18 19 aliases { 20 ethernet0 = &enet0; 21 ethernet1 = &enet1; 22 serial0 = &serial0; 23 serial1 = &serial1; 24 pci0 = &pci0; 25 pci1 = &pci1; 26 pci2 = &pci2; 27 }; 28 29 cpus { 30 #address-cells = <1>; 31 #size-cells = <0>; 32 33 PowerPC,8315@0 { 34 device_type = "cpu"; 35 reg = <0x0>; 36 d-cache-line-size = <32>; 37 i-cache-line-size = <32>; 38 d-cache-size = <16384>; 39 i-cache-size = <16384>; 40 timebase-frequency = <0>; // from bootloader 41 bus-frequency = <0>; // from bootloader 42 clock-frequency = <0>; // from bootloader 43 }; 44 }; 45 46 memory { 47 device_type = "memory"; 48 reg = <0x00000000 0x08000000>; // 128MB at 0 49 }; 50 51 localbus@e0005000 { 52 #address-cells = <2>; 53 #size-cells = <1>; 54 compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; 55 reg = <0xe0005000 0x1000>; 56 interrupts = <77 0x8>; 57 interrupt-parent = <&ipic>; 58 59 // CS0 and CS1 are swapped when 60 // booting from nand, but the 61 // addresses are the same. 62 ranges = <0x0 0x0 0xfe000000 0x00800000 63 0x1 0x0 0xe0600000 0x00002000 64 0x2 0x0 0xf0000000 0x00020000 65 0x3 0x0 0xfa000000 0x00008000>; 66 67 flash@0,0 { 68 #address-cells = <1>; 69 #size-cells = <1>; 70 compatible = "cfi-flash"; 71 reg = <0x0 0x0 0x800000>; 72 bank-width = <2>; 73 device-width = <1>; 74 }; 75 76 nand@1,0 { 77 #address-cells = <1>; 78 #size-cells = <1>; 79 compatible = "fsl,mpc8315-fcm-nand", 80 "fsl,elbc-fcm-nand"; 81 reg = <0x1 0x0 0x2000>; 82 83 u-boot@0 { 84 reg = <0x0 0x100000>; 85 read-only; 86 }; 87 88 kernel@100000 { 89 reg = <0x100000 0x300000>; 90 }; 91 fs@400000 { 92 reg = <0x400000 0x1c00000>; 93 }; 94 }; 95 }; 96 97 immr@e0000000 { 98 #address-cells = <1>; 99 #size-cells = <1>; 100 device_type = "soc"; 101 compatible = "fsl,mpc8315-immr", "simple-bus"; 102 ranges = <0 0xe0000000 0x00100000>; 103 reg = <0xe0000000 0x00000200>; 104 bus-frequency = <0>; 105 106 wdt@200 { 107 device_type = "watchdog"; 108 compatible = "mpc83xx_wdt"; 109 reg = <0x200 0x100>; 110 }; 111 112 i2c@3000 { 113 #address-cells = <1>; 114 #size-cells = <0>; 115 cell-index = <0>; 116 compatible = "fsl-i2c"; 117 reg = <0x3000 0x100>; 118 interrupts = <14 0x8>; 119 interrupt-parent = <&ipic>; 120 dfsrr; 121 rtc@68 { 122 compatible = "dallas,ds1339"; 123 reg = <0x68>; 124 }; 125 126 mcu_pio: mcu@a { 127 #gpio-cells = <2>; 128 compatible = "fsl,mc9s08qg8-mpc8315erdb", 129 "fsl,mcu-mpc8349emitx"; 130 reg = <0x0a>; 131 gpio-controller; 132 }; 133 }; 134 135 spi@7000 { 136 cell-index = <0>; 137 compatible = "fsl,spi"; 138 reg = <0x7000 0x1000>; 139 interrupts = <16 0x8>; 140 interrupt-parent = <&ipic>; 141 mode = "cpu"; 142 }; 143 144 dma@82a8 { 145 #address-cells = <1>; 146 #size-cells = <1>; 147 compatible = "fsl,mpc8315-dma", "fsl,elo-dma"; 148 reg = <0x82a8 4>; 149 ranges = <0 0x8100 0x1a8>; 150 interrupt-parent = <&ipic>; 151 interrupts = <71 8>; 152 cell-index = <0>; 153 dma-channel@0 { 154 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; 155 reg = <0 0x80>; 156 cell-index = <0>; 157 interrupt-parent = <&ipic>; 158 interrupts = <71 8>; 159 }; 160 dma-channel@80 { 161 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; 162 reg = <0x80 0x80>; 163 cell-index = <1>; 164 interrupt-parent = <&ipic>; 165 interrupts = <71 8>; 166 }; 167 dma-channel@100 { 168 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; 169 reg = <0x100 0x80>; 170 cell-index = <2>; 171 interrupt-parent = <&ipic>; 172 interrupts = <71 8>; 173 }; 174 dma-channel@180 { 175 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; 176 reg = <0x180 0x28>; 177 cell-index = <3>; 178 interrupt-parent = <&ipic>; 179 interrupts = <71 8>; 180 }; 181 }; 182 183 usb@23000 { 184 compatible = "fsl-usb2-dr"; 185 reg = <0x23000 0x1000>; 186 #address-cells = <1>; 187 #size-cells = <0>; 188 interrupt-parent = <&ipic>; 189 interrupts = <38 0x8>; 190 phy_type = "utmi"; 191 }; 192 193 enet0: ethernet@24000 { 194 #address-cells = <1>; 195 #size-cells = <1>; 196 cell-index = <0>; 197 device_type = "network"; 198 model = "eTSEC"; 199 compatible = "gianfar"; 200 reg = <0x24000 0x1000>; 201 ranges = <0x0 0x24000 0x1000>; 202 local-mac-address = [ 00 00 00 00 00 00 ]; 203 interrupts = <32 0x8 33 0x8 34 0x8>; 204 interrupt-parent = <&ipic>; 205 tbi-handle = <&tbi0>; 206 phy-handle = < &phy0 >; 207 fsl,magic-packet; 208 209 mdio@520 { 210 #address-cells = <1>; 211 #size-cells = <0>; 212 compatible = "fsl,gianfar-mdio"; 213 reg = <0x520 0x20>; 214 215 phy0: ethernet-phy@0 { 216 interrupt-parent = <&ipic>; 217 interrupts = <20 0x8>; 218 reg = <0x0>; 219 }; 220 221 phy1: ethernet-phy@1 { 222 interrupt-parent = <&ipic>; 223 interrupts = <19 0x8>; 224 reg = <0x1>; 225 }; 226 227 tbi0: tbi-phy@11 { 228 reg = <0x11>; 229 device_type = "tbi-phy"; 230 }; 231 }; 232 }; 233 234 enet1: ethernet@25000 { 235 #address-cells = <1>; 236 #size-cells = <1>; 237 cell-index = <1>; 238 device_type = "network"; 239 model = "eTSEC"; 240 compatible = "gianfar"; 241 reg = <0x25000 0x1000>; 242 ranges = <0x0 0x25000 0x1000>; 243 local-mac-address = [ 00 00 00 00 00 00 ]; 244 interrupts = <35 0x8 36 0x8 37 0x8>; 245 interrupt-parent = <&ipic>; 246 tbi-handle = <&tbi1>; 247 phy-handle = < &phy1 >; 248 fsl,magic-packet; 249 250 mdio@520 { 251 #address-cells = <1>; 252 #size-cells = <0>; 253 compatible = "fsl,gianfar-tbi"; 254 reg = <0x520 0x20>; 255 256 tbi1: tbi-phy@11 { 257 reg = <0x11>; 258 device_type = "tbi-phy"; 259 }; 260 }; 261 }; 262 263 serial0: serial@4500 { 264 cell-index = <0>; 265 device_type = "serial"; 266 compatible = "fsl,ns16550", "ns16550"; 267 reg = <0x4500 0x100>; 268 clock-frequency = <133333333>; 269 interrupts = <9 0x8>; 270 interrupt-parent = <&ipic>; 271 }; 272 273 serial1: serial@4600 { 274 cell-index = <1>; 275 device_type = "serial"; 276 compatible = "fsl,ns16550", "ns16550"; 277 reg = <0x4600 0x100>; 278 clock-frequency = <133333333>; 279 interrupts = <10 0x8>; 280 interrupt-parent = <&ipic>; 281 }; 282 283 crypto@30000 { 284 compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", 285 "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", 286 "fsl,sec2.0"; 287 reg = <0x30000 0x10000>; 288 interrupts = <11 0x8>; 289 interrupt-parent = <&ipic>; 290 fsl,num-channels = <4>; 291 fsl,channel-fifo-len = <24>; 292 fsl,exec-units-mask = <0x97c>; 293 fsl,descriptor-types-mask = <0x3a30abf>; 294 }; 295 296 sata@18000 { 297 compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; 298 reg = <0x18000 0x1000>; 299 cell-index = <1>; 300 interrupts = <44 0x8>; 301 interrupt-parent = <&ipic>; 302 }; 303 304 sata@19000 { 305 compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; 306 reg = <0x19000 0x1000>; 307 cell-index = <2>; 308 interrupts = <45 0x8>; 309 interrupt-parent = <&ipic>; 310 }; 311 312 gtm1: timer@500 { 313 compatible = "fsl,mpc8315-gtm", "fsl,gtm"; 314 reg = <0x500 0x100>; 315 interrupts = <90 8 78 8 84 8 72 8>; 316 interrupt-parent = <&ipic>; 317 clock-frequency = <133333333>; 318 }; 319 320 timer@600 { 321 compatible = "fsl,mpc8315-gtm", "fsl,gtm"; 322 reg = <0x600 0x100>; 323 interrupts = <91 8 79 8 85 8 73 8>; 324 interrupt-parent = <&ipic>; 325 clock-frequency = <133333333>; 326 }; 327 328 /* IPIC 329 * interrupts cell = <intr #, sense> 330 * sense values match linux IORESOURCE_IRQ_* defines: 331 * sense == 8: Level, low assertion 332 * sense == 2: Edge, high-to-low change 333 */ 334 ipic: interrupt-controller@700 { 335 interrupt-controller; 336 #address-cells = <0>; 337 #interrupt-cells = <2>; 338 reg = <0x700 0x100>; 339 device_type = "ipic"; 340 }; 341 342 ipic-msi@7c0 { 343 compatible = "fsl,ipic-msi"; 344 reg = <0x7c0 0x40>; 345 msi-available-ranges = <0 0x100>; 346 interrupts = <0x43 0x8 347 0x4 0x8 348 0x51 0x8 349 0x52 0x8 350 0x56 0x8 351 0x57 0x8 352 0x58 0x8 353 0x59 0x8>; 354 interrupt-parent = < &ipic >; 355 }; 356 357 pmc: power@b00 { 358 compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc", 359 "fsl,mpc8349-pmc"; 360 reg = <0xb00 0x100 0xa00 0x100>; 361 interrupts = <80 8>; 362 interrupt-parent = <&ipic>; 363 fsl,mpc8313-wakeup-timer = <>m1>; 364 }; 365 }; 366 367 pci0: pci@e0008500 { 368 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 369 interrupt-map = < 370 /* IDSEL 0x0E -mini PCI */ 371 0x7000 0x0 0x0 0x1 &ipic 18 0x8 372 0x7000 0x0 0x0 0x2 &ipic 18 0x8 373 0x7000 0x0 0x0 0x3 &ipic 18 0x8 374 0x7000 0x0 0x0 0x4 &ipic 18 0x8 375 376 /* IDSEL 0x0F -mini PCI */ 377 0x7800 0x0 0x0 0x1 &ipic 17 0x8 378 0x7800 0x0 0x0 0x2 &ipic 17 0x8 379 0x7800 0x0 0x0 0x3 &ipic 17 0x8 380 0x7800 0x0 0x0 0x4 &ipic 17 0x8 381 382 /* IDSEL 0x10 - PCI slot */ 383 0x8000 0x0 0x0 0x1 &ipic 48 0x8 384 0x8000 0x0 0x0 0x2 &ipic 17 0x8 385 0x8000 0x0 0x0 0x3 &ipic 48 0x8 386 0x8000 0x0 0x0 0x4 &ipic 17 0x8>; 387 interrupt-parent = <&ipic>; 388 interrupts = <66 0x8>; 389 bus-range = <0x0 0x0>; 390 ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 391 0x42000000 0 0x80000000 0x80000000 0 0x10000000 392 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>; 393 clock-frequency = <66666666>; 394 #interrupt-cells = <1>; 395 #size-cells = <2>; 396 #address-cells = <3>; 397 reg = <0xe0008500 0x100 /* internal registers */ 398 0xe0008300 0x8>; /* config space access registers */ 399 compatible = "fsl,mpc8349-pci"; 400 device_type = "pci"; 401 }; 402 403 pci1: pcie@e0009000 { 404 #address-cells = <3>; 405 #size-cells = <2>; 406 #interrupt-cells = <1>; 407 device_type = "pci"; 408 compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; 409 reg = <0xe0009000 0x00001000>; 410 ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 411 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; 412 bus-range = <0 255>; 413 interrupt-map-mask = <0xf800 0 0 7>; 414 interrupt-map = <0 0 0 1 &ipic 1 8 415 0 0 0 2 &ipic 1 8 416 0 0 0 3 &ipic 1 8 417 0 0 0 4 &ipic 1 8>; 418 clock-frequency = <0>; 419 420 pcie@0 { 421 #address-cells = <3>; 422 #size-cells = <2>; 423 device_type = "pci"; 424 reg = <0 0 0 0 0>; 425 ranges = <0x02000000 0 0xa0000000 426 0x02000000 0 0xa0000000 427 0 0x10000000 428 0x01000000 0 0x00000000 429 0x01000000 0 0x00000000 430 0 0x00800000>; 431 }; 432 }; 433 434 pci2: pcie@e000a000 { 435 #address-cells = <3>; 436 #size-cells = <2>; 437 #interrupt-cells = <1>; 438 device_type = "pci"; 439 compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; 440 reg = <0xe000a000 0x00001000>; 441 ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000 442 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>; 443 bus-range = <0 255>; 444 interrupt-map-mask = <0xf800 0 0 7>; 445 interrupt-map = <0 0 0 1 &ipic 2 8 446 0 0 0 2 &ipic 2 8 447 0 0 0 3 &ipic 2 8 448 0 0 0 4 &ipic 2 8>; 449 clock-frequency = <0>; 450 451 pcie@0 { 452 #address-cells = <3>; 453 #size-cells = <2>; 454 device_type = "pci"; 455 reg = <0 0 0 0 0>; 456 ranges = <0x02000000 0 0xc0000000 457 0x02000000 0 0xc0000000 458 0 0x10000000 459 0x01000000 0 0x00000000 460 0x01000000 0 0x00000000 461 0 0x00800000>; 462 }; 463 }; 464 465 leds { 466 compatible = "gpio-leds"; 467 468 pwr { 469 gpios = <&mcu_pio 0 0>; 470 default-state = "on"; 471 }; 472 473 hdd { 474 gpios = <&mcu_pio 1 0>; 475 linux,default-trigger = "ide-disk"; 476 }; 477 }; 478}; 479