xref: /linux/arch/powerpc/boot/dts/mpc8308rdb.dts (revision 24168c5e6dfbdd5b414f048f47f75d64533296ca)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8308RDB Device Tree Source
4 *
5 * Copyright 2009 Freescale Semiconductor Inc.
6 * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
7 */
8
9/dts-v1/;
10
11/ {
12	compatible = "fsl,mpc8308rdb";
13	#address-cells = <1>;
14	#size-cells = <1>;
15
16	aliases {
17		ethernet0 = &enet0;
18		ethernet1 = &enet1;
19		serial0 = &serial0;
20		serial1 = &serial1;
21		pci0 = &pci0;
22	};
23
24	cpus {
25		#address-cells = <1>;
26		#size-cells = <0>;
27
28		PowerPC,8308@0 {
29			device_type = "cpu";
30			reg = <0x0>;
31			d-cache-line-size = <32>;
32			i-cache-line-size = <32>;
33			d-cache-size = <16384>;
34			i-cache-size = <16384>;
35			timebase-frequency = <0>;	// from bootloader
36			bus-frequency = <0>;		// from bootloader
37			clock-frequency = <0>;		// from bootloader
38		};
39	};
40
41	memory {
42		device_type = "memory";
43		reg = <0x00000000 0x08000000>;	// 128MB at 0
44	};
45
46	localbus@e0005000 {
47		#address-cells = <2>;
48		#size-cells = <1>;
49		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
50		reg = <0xe0005000 0x1000>;
51		interrupts = <77 0x8>;
52		interrupt-parent = <&ipic>;
53
54		// CS0 and CS1 are swapped when
55		// booting from nand, but the
56		// addresses are the same.
57		ranges = <0x0 0x0 0xfe000000 0x00800000
58		          0x1 0x0 0xe0600000 0x00002000
59		          0x2 0x0 0xf0000000 0x00020000
60		          0x3 0x0 0xfa000000 0x00008000>;
61
62		flash@0,0 {
63			#address-cells = <1>;
64			#size-cells = <1>;
65			compatible = "cfi-flash";
66			reg = <0x0 0x0 0x800000>;
67			bank-width = <2>;
68			device-width = <1>;
69
70			u-boot@0 {
71				reg = <0x0 0x60000>;
72				read-only;
73			};
74			env@60000 {
75				reg = <0x60000 0x10000>;
76			};
77			env1@70000 {
78				reg = <0x70000 0x10000>;
79			};
80			kernel@80000 {
81				reg = <0x80000 0x200000>;
82			};
83			dtb@280000 {
84				reg = <0x280000 0x10000>;
85			};
86			ramdisk@290000 {
87				reg = <0x290000 0x570000>;
88			};
89		};
90
91		nand@1,0 {
92			#address-cells = <1>;
93			#size-cells = <1>;
94			compatible = "fsl,mpc8315-fcm-nand",
95			             "fsl,elbc-fcm-nand";
96			reg = <0x1 0x0 0x2000>;
97
98			jffs2@0 {
99				reg = <0x0 0x2000000>;
100			};
101		};
102	};
103
104	immr@e0000000 {
105		#address-cells = <1>;
106		#size-cells = <1>;
107		device_type = "soc";
108		compatible = "fsl,mpc8308-immr", "simple-bus";
109		ranges = <0 0xe0000000 0x00100000>;
110		reg = <0xe0000000 0x00000200>;
111		bus-frequency = <0>;
112
113		i2c@3000 {
114			#address-cells = <1>;
115			#size-cells = <0>;
116			cell-index = <0>;
117			compatible = "fsl-i2c";
118			reg = <0x3000 0x100>;
119			interrupts = <14 0x8>;
120			interrupt-parent = <&ipic>;
121			dfsrr;
122			rtc@68 {
123				compatible = "dallas,ds1339";
124				reg = <0x68>;
125			};
126		};
127
128		usb@23000 {
129			compatible = "fsl-usb2-dr";
130			reg = <0x23000 0x1000>;
131			#address-cells = <1>;
132			#size-cells = <0>;
133			interrupt-parent = <&ipic>;
134			interrupts = <38 0x8>;
135			dr_mode = "peripheral";
136			phy_type = "ulpi";
137		};
138
139		enet0: ethernet@24000 {
140			#address-cells = <1>;
141			#size-cells = <1>;
142			ranges = <0x0 0x24000 0x1000>;
143
144			cell-index = <0>;
145			device_type = "network";
146			model = "eTSEC";
147			compatible = "gianfar";
148			reg = <0x24000 0x1000>;
149			local-mac-address = [ 00 00 00 00 00 00 ];
150			interrupts = <32 0x8 33 0x8 34 0x8>;
151			interrupt-parent = <&ipic>;
152			tbi-handle = < &tbi0 >;
153			phy-handle = < &phy2 >;
154			fsl,magic-packet;
155
156			mdio@520 {
157				#address-cells = <1>;
158				#size-cells = <0>;
159				compatible = "fsl,gianfar-mdio";
160				reg = <0x520 0x20>;
161				phy2: ethernet-phy@2 {
162					interrupt-parent = <&ipic>;
163					interrupts = <17 0x8>;
164					reg = <0x2>;
165				};
166				tbi0: tbi-phy@11 {
167					reg = <0x11>;
168					device_type = "tbi-phy";
169				};
170			};
171		};
172
173		enet1: ethernet@25000 {
174			#address-cells = <1>;
175			#size-cells = <1>;
176			cell-index = <1>;
177			device_type = "network";
178			model = "eTSEC";
179			compatible = "gianfar";
180			reg = <0x25000 0x1000>;
181			ranges = <0x0 0x25000 0x1000>;
182			local-mac-address = [ 00 00 00 00 00 00 ];
183			interrupts = <35 0x8 36 0x8 37 0x8>;
184			interrupt-parent = <&ipic>;
185			tbi-handle = < &tbi1 >;
186			/* Vitesse 7385 isn't on the MDIO bus */
187			fixed-link = <1 1 1000 0 0>;
188			fsl,magic-packet;
189
190			mdio@520 {
191				#address-cells = <1>;
192				#size-cells = <0>;
193				compatible = "fsl,gianfar-tbi";
194				reg = <0x520 0x20>;
195
196				tbi1: tbi-phy@11 {
197					reg = <0x11>;
198					device_type = "tbi-phy";
199				};
200			};
201		};
202
203		serial0: serial@4500 {
204			cell-index = <0>;
205			device_type = "serial";
206			compatible = "fsl,ns16550", "ns16550";
207			reg = <0x4500 0x100>;
208			clock-frequency = <133333333>;
209			interrupts = <9 0x8>;
210			interrupt-parent = <&ipic>;
211		};
212
213		serial1: serial@4600 {
214			cell-index = <1>;
215			device_type = "serial";
216			compatible = "fsl,ns16550", "ns16550";
217			reg = <0x4600 0x100>;
218			clock-frequency = <133333333>;
219			interrupts = <10 0x8>;
220			interrupt-parent = <&ipic>;
221		};
222
223		gpio@c00 {
224			#gpio-cells = <2>;
225			device_type = "gpio";
226			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
227			reg = <0xc00 0x18>;
228			interrupts = <74 0x8>;
229			interrupt-parent = <&ipic>;
230			gpio-controller;
231		};
232
233		/* IPIC
234		 * interrupts cell = <intr #, sense>
235		 * sense values match linux IORESOURCE_IRQ_* defines:
236		 * sense == 8: Level, low assertion
237		 * sense == 2: Edge, high-to-low change
238		 */
239		ipic: interrupt-controller@700 {
240			compatible = "fsl,ipic";
241			interrupt-controller;
242			#address-cells = <0>;
243			#interrupt-cells = <2>;
244			reg = <0x700 0x100>;
245			device_type = "ipic";
246		};
247
248		ipic-msi@7c0 {
249			compatible = "fsl,ipic-msi";
250			reg = <0x7c0 0x40>;
251			msi-available-ranges = <0x0 0x100>;
252			interrupts = < 0x43 0x8
253					0x4  0x8
254					0x51 0x8
255					0x52 0x8
256					0x56 0x8
257					0x57 0x8
258					0x58 0x8
259					0x59 0x8 >;
260			interrupt-parent = < &ipic >;
261		};
262
263		dma@2c000 {
264			compatible = "fsl,mpc8308-dma";
265			reg = <0x2c000 0x1800>;
266			interrupts = <3 0x8
267					94 0x8>;
268			interrupt-parent = < &ipic >;
269		};
270
271	};
272
273	pci0: pcie@e0009000 {
274		#address-cells = <3>;
275		#size-cells = <2>;
276		#interrupt-cells = <1>;
277		device_type = "pci";
278		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
279		reg = <0xe0009000 0x00001000
280			0xb0000000 0x01000000>;
281		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
282		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
283		bus-range = <0 0>;
284		interrupt-map-mask = <0xf800 0 0 7>;
285		interrupt-map = <0 0 0 1 &ipic 1 8
286				 0 0 0 2 &ipic 1 8
287				 0 0 0 3 &ipic 1 8
288				 0 0 0 4 &ipic 1 8>;
289		interrupts = <0x1 0x8>;
290		interrupt-parent = <&ipic>;
291		clock-frequency = <0>;
292
293		pcie@0 {
294			#address-cells = <3>;
295			#size-cells = <2>;
296			device_type = "pci";
297			reg = <0 0 0 0 0>;
298			ranges = <0x02000000 0 0xa0000000
299				  0x02000000 0 0xa0000000
300				  0 0x10000000
301				  0x01000000 0 0x00000000
302				  0x01000000 0 0x00000000
303				  0 0x00800000>;
304		};
305	};
306};
307