1/* 2 * Device Tree Source for IBM Embedded PPC 476 Platform 3 * 4 * Copyright 2010 Torez Smith, IBM Corporation. 5 * 6 * Based on earlier code: 7 * Copyright (c) 2006, 2007 IBM Corp. 8 * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> 9 * 10 * This file is licensed under the terms of the GNU General Public 11 * License version 2. This program is licensed "as is" without 12 * any warranty of any kind, whether express or implied. 13 */ 14 15/dts-v1/; 16 17/memreserve/ 0x01f00000 0x00100000; 18 19/ { 20 #address-cells = <2>; 21 #size-cells = <1>; 22 model = "ibm,iss-4xx"; 23 compatible = "ibm,iss-4xx"; 24 dcr-parent = <&{/cpus/cpu@0}>; 25 26 aliases { 27 serial0 = &UART0; 28 }; 29 30 cpus { 31 #address-cells = <1>; 32 #size-cells = <0>; 33 34 cpu@0 { 35 device_type = "cpu"; 36 model = "PowerPC,4xx"; // real CPU changed in sim 37 reg = <0>; 38 clock-frequency = <100000000>; // 100Mhz :-) 39 timebase-frequency = <100000000>; 40 i-cache-line-size = <32>; 41 d-cache-line-size = <32>; 42 i-cache-size = <32768>; 43 d-cache-size = <32768>; 44 dcr-controller; 45 dcr-access-method = "native"; 46 status = "ok"; 47 }; 48 cpu@1 { 49 device_type = "cpu"; 50 model = "PowerPC,4xx"; // real CPU changed in sim 51 reg = <1>; 52 clock-frequency = <100000000>; // 100Mhz :-) 53 timebase-frequency = <100000000>; 54 i-cache-line-size = <32>; 55 d-cache-line-size = <32>; 56 i-cache-size = <32768>; 57 d-cache-size = <32768>; 58 dcr-controller; 59 dcr-access-method = "native"; 60 status = "disabled"; 61 enable-method = "spin-table"; 62 cpu-release-addr = <0 0x01f00100>; 63 }; 64 cpu@2 { 65 device_type = "cpu"; 66 model = "PowerPC,4xx"; // real CPU changed in sim 67 reg = <2>; 68 clock-frequency = <100000000>; // 100Mhz :-) 69 timebase-frequency = <100000000>; 70 i-cache-line-size = <32>; 71 d-cache-line-size = <32>; 72 i-cache-size = <32768>; 73 d-cache-size = <32768>; 74 dcr-controller; 75 dcr-access-method = "native"; 76 status = "disabled"; 77 enable-method = "spin-table"; 78 cpu-release-addr = <0 0x01f00200>; 79 }; 80 cpu@3 { 81 device_type = "cpu"; 82 model = "PowerPC,4xx"; // real CPU changed in sim 83 reg = <3>; 84 clock-frequency = <100000000>; // 100Mhz :-) 85 timebase-frequency = <100000000>; 86 i-cache-line-size = <32>; 87 d-cache-line-size = <32>; 88 i-cache-size = <32768>; 89 d-cache-size = <32768>; 90 dcr-controller; 91 dcr-access-method = "native"; 92 status = "disabled"; 93 enable-method = "spin-table"; 94 cpu-release-addr = <0 0x01f00300>; 95 }; 96 }; 97 98 memory { 99 device_type = "memory"; 100 reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage 101 102 }; 103 104 MPIC: interrupt-controller { 105 compatible = "chrp,open-pic"; 106 interrupt-controller; 107 dcr-reg = <0xffc00000 0x00030000>; 108 #address-cells = <0>; 109 #size-cells = <0>; 110 #interrupt-cells = <2>; 111 112 }; 113 114 plb { 115 compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */ 116 #address-cells = <2>; 117 #size-cells = <1>; 118 ranges; 119 clock-frequency = <0>; // Filled in by zImage 120 121 POB0: opb { 122 compatible = "ibm,opb-4xx", "ibm,opb"; 123 #address-cells = <1>; 124 #size-cells = <1>; 125 /* Wish there was a nicer way of specifying a full 32-bit 126 range */ 127 ranges = <0x00000000 0x00000001 0x00000000 0x80000000 128 0x80000000 0x00000001 0x80000000 0x80000000>; 129 clock-frequency = <0>; // Filled in by zImage 130 UART0: serial@40000200 { 131 device_type = "serial"; 132 compatible = "ns16550a"; 133 reg = <0x40000200 0x00000008>; 134 virtual-reg = <0xe0000200>; 135 clock-frequency = <11059200>; 136 current-speed = <115200>; 137 interrupt-parent = <&MPIC>; 138 interrupts = <0x0 0x2>; 139 }; 140 }; 141 }; 142 143 nvrtc { 144 compatible = "ds1743-nvram", "ds1743", "rtc-ds1743"; 145 reg = <0 0xEF703000 0x2000>; 146 }; 147 iss-block { 148 compatible = "ibm,iss-sim-block-device"; 149 reg = <0 0xEF701000 0x1000>; 150 }; 151 152 chosen { 153 linux,stdout-path = "/plb/opb/serial@40000200"; 154 }; 155}; 156