1/* 2 * T1040RDB Device Tree Source 3 * 4 * Copyright 2014 - 2015 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35/include/ "t104xsi-pre.dtsi" 36/include/ "t104xrdb.dtsi" 37 38/ { 39 model = "fsl,T1040RDB"; 40 compatible = "fsl,T1040RDB"; 41 42 aliases { 43 phy_sgmii_2 = &phy_sgmii_2; 44 }; 45 46 soc@ffe000000 { 47 fman@400000 { 48 ethernet@e0000 { 49 fixed-link = <0 1 1000 0 0>; 50 phy-connection-type = "sgmii"; 51 }; 52 53 ethernet@e2000 { 54 fixed-link = <1 1 1000 0 0>; 55 phy-connection-type = "sgmii"; 56 }; 57 58 ethernet@e4000 { 59 phy-handle = <&phy_sgmii_2>; 60 phy-connection-type = "sgmii"; 61 }; 62 63 mdio@fc000 { 64 phy_sgmii_2: ethernet-phy@3 { 65 reg = <0x03>; 66 }; 67 68 /* VSC8514 QSGMII PHY */ 69 phy_qsgmii_0: ethernet-phy@4 { 70 reg = <0x4>; 71 }; 72 73 phy_qsgmii_1: ethernet-phy@5 { 74 reg = <0x5>; 75 }; 76 77 phy_qsgmii_2: ethernet-phy@6 { 78 reg = <0x6>; 79 }; 80 81 phy_qsgmii_3: ethernet-phy@7 { 82 reg = <0x7>; 83 }; 84 85 /* VSC8514 QSGMII PHY */ 86 phy_qsgmii_4: ethernet-phy@8 { 87 reg = <0x8>; 88 }; 89 90 phy_qsgmii_5: ethernet-phy@9 { 91 reg = <0x9>; 92 }; 93 94 phy_qsgmii_6: ethernet-phy@a { 95 reg = <0xa>; 96 }; 97 98 phy_qsgmii_7: ethernet-phy@b { 99 reg = <0xb>; 100 }; 101 }; 102 }; 103 }; 104 105 ifc: localbus@ffe124000 { 106 cpld@3,0 { 107 compatible = "fsl,t1040rdb-cpld"; 108 }; 109 }; 110}; 111 112#include "t1040si-post.dtsi" 113 114&seville_switch { 115 status = "okay"; 116}; 117 118&seville_port0 { 119 managed = "in-band-status"; 120 phy-handle = <&phy_qsgmii_0>; 121 phy-mode = "qsgmii"; 122 label = "ETH5"; 123 status = "okay"; 124}; 125 126&seville_port1 { 127 managed = "in-band-status"; 128 phy-handle = <&phy_qsgmii_1>; 129 phy-mode = "qsgmii"; 130 label = "ETH4"; 131 status = "okay"; 132}; 133 134&seville_port2 { 135 managed = "in-band-status"; 136 phy-handle = <&phy_qsgmii_2>; 137 phy-mode = "qsgmii"; 138 label = "ETH7"; 139 status = "okay"; 140}; 141 142&seville_port3 { 143 managed = "in-band-status"; 144 phy-handle = <&phy_qsgmii_3>; 145 phy-mode = "qsgmii"; 146 label = "ETH6"; 147 status = "okay"; 148}; 149 150&seville_port4 { 151 managed = "in-band-status"; 152 phy-handle = <&phy_qsgmii_4>; 153 phy-mode = "qsgmii"; 154 label = "ETH9"; 155 status = "okay"; 156}; 157 158&seville_port5 { 159 managed = "in-band-status"; 160 phy-handle = <&phy_qsgmii_5>; 161 phy-mode = "qsgmii"; 162 label = "ETH8"; 163 status = "okay"; 164}; 165 166&seville_port6 { 167 managed = "in-band-status"; 168 phy-handle = <&phy_qsgmii_6>; 169 phy-mode = "qsgmii"; 170 label = "ETH11"; 171 status = "okay"; 172}; 173 174&seville_port7 { 175 managed = "in-band-status"; 176 phy-handle = <&phy_qsgmii_7>; 177 phy-mode = "qsgmii"; 178 label = "ETH10"; 179 status = "okay"; 180}; 181 182&seville_port8 { 183 ethernet = <&enet0>; 184 status = "okay"; 185}; 186