xref: /linux/arch/powerpc/boot/dts/fsl/t1024rdb.dts (revision 95298d63c67673c654c08952672d016212b26054)
1/*
2 * T1024 RDB Device Tree Source
3 *
4 * Copyright 2014 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "t102xsi-pre.dtsi"
36
37/ {
38	model = "fsl,T1024RDB";
39	compatible = "fsl,T1024RDB";
40	#address-cells = <2>;
41	#size-cells = <2>;
42	interrupt-parent = <&mpic>;
43
44	aliases {
45		sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
46	};
47
48	reserved-memory {
49		#address-cells = <2>;
50		#size-cells = <2>;
51		ranges;
52
53		bman_fbpr: bman-fbpr {
54			size = <0 0x1000000>;
55			alignment = <0 0x1000000>;
56		};
57
58		qman_fqd: qman-fqd {
59			size = <0 0x400000>;
60			alignment = <0 0x400000>;
61		};
62
63		qman_pfdr: qman-pfdr {
64			size = <0 0x2000000>;
65			alignment = <0 0x2000000>;
66		};
67	};
68
69	ifc: localbus@ffe124000 {
70		reg = <0xf 0xfe124000 0 0x2000>;
71		ranges = <0 0 0xf 0xe8000000 0x08000000
72			  2 0 0xf 0xff800000 0x00010000
73			  3 0 0xf 0xffdf0000 0x00008000>;
74
75		nor@0,0 {
76			#address-cells = <1>;
77			#size-cells = <1>;
78			compatible = "cfi-flash";
79			reg = <0x0 0x0 0x8000000>;
80			bank-width = <2>;
81			device-width = <1>;
82		};
83
84		nand@1,0 {
85			#address-cells = <1>;
86			#size-cells = <1>;
87			compatible = "fsl,ifc-nand";
88			reg = <0x2 0x0 0x10000>;
89		};
90
91		board-control@2,0 {
92			#address-cells = <1>;
93			#size-cells = <1>;
94			compatible = "fsl,t1024-cpld";
95			reg = <3 0 0x300>;
96			ranges = <0 3 0 0x300>;
97			bank-width = <1>;
98			device-width = <1>;
99		};
100	};
101
102	memory {
103		device_type = "memory";
104	};
105
106	dcsr: dcsr@f00000000 {
107		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
108	};
109
110	bportals: bman-portals@ff4000000 {
111		ranges = <0x0 0xf 0xf4000000 0x2000000>;
112	};
113
114	qportals: qman-portals@ff6000000 {
115		ranges = <0x0 0xf 0xf6000000 0x2000000>;
116	};
117
118	soc: soc@ffe000000 {
119		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
120		reg = <0xf 0xfe000000 0 0x00001000>;
121		spi@110000 {
122			flash@0 {
123				#address-cells = <1>;
124				#size-cells = <1>;
125				compatible = "micron,n25q512ax3", "jedec,spi-nor";
126				reg = <0>;
127				spi-max-frequency = <10000000>; /* input clk */
128			};
129
130			slic@1 {
131				compatible = "maxim,ds26522";
132				reg = <1>;
133				spi-max-frequency = <2000000>;
134			};
135
136			slic@2 {
137				compatible = "maxim,ds26522";
138				reg = <2>;
139				spi-max-frequency = <2000000>;
140			};
141		};
142
143		i2c@118000 {
144			adt7461@4c {
145				/* Thermal Monitor */
146				compatible = "adi,adt7461";
147				reg = <0x4c>;
148			};
149
150			current-sensor@40 {
151				compatible = "ti,ina220";
152				reg = <0x40>;
153				shunt-resistor = <1000>;
154			};
155
156			eeprom@50 {
157				compatible = "atmel,24c256";
158				reg = <0x50>;
159			};
160
161			rtc@68 {
162				compatible = "dallas,ds1339";
163				reg = <0x68>;
164				interrupts = <0x1 0x1 0 0>;
165			};
166		};
167
168		i2c@118100 {
169			pca9546@77 {
170				compatible = "nxp,pca9546";
171				reg = <0x77>;
172				#address-cells = <1>;
173				#size-cells = <0>;
174			};
175		};
176
177		fman@400000 {
178			fm1mac1: ethernet@e0000 {
179				phy-handle = <&xg_aqr105_phy3>;
180				phy-connection-type = "xgmii";
181				sleep = <&rcpm 0x80000000>;
182			};
183
184			fm1mac2: ethernet@e2000 {
185				sleep = <&rcpm 0x40000000>;
186			};
187
188			fm1mac3: ethernet@e4000 {
189				phy-handle = <&rgmii_phy2>;
190				phy-connection-type = "rgmii";
191				sleep = <&rcpm 0x20000000>;
192			};
193
194			fm1mac4: ethernet@e6000 {
195				phy-handle = <&rgmii_phy1>;
196				phy-connection-type = "rgmii";
197				sleep = <&rcpm 0x10000000>;
198			};
199
200
201			mdio0: mdio@fc000 {
202				rgmii_phy1: ethernet-phy@2 {
203					reg = <0x2>;
204				};
205				rgmii_phy2: ethernet-phy@6 {
206					reg = <0x6>;
207				};
208			};
209
210			xmdio0: mdio@fd000 {
211				xg_aqr105_phy3: ethernet-phy@1 {
212					compatible = "ethernet-phy-ieee802.3-c45";
213					reg = <0x1>;
214				};
215				sg_2500_aqr105_phy4: ethernet-phy@2 {
216					compatible = "ethernet-phy-ieee802.3-c45";
217					reg = <0x2>;
218				};
219			};
220		};
221	};
222
223	pci0: pcie@ffe240000 {
224		reg = <0xf 0xfe240000 0 0x10000>;
225		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
226			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
227		pcie@0 {
228			ranges = <0x02000000 0 0xe0000000
229				  0x02000000 0 0xe0000000
230				  0 0x10000000
231
232				  0x01000000 0 0x00000000
233				  0x01000000 0 0x00000000
234				  0 0x00010000>;
235		};
236	};
237
238	pci1: pcie@ffe250000 {
239		reg = <0xf 0xfe250000 0 0x10000>;
240		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
241			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
242		pcie@0 {
243			ranges = <0x02000000 0 0xe0000000
244				  0x02000000 0 0xe0000000
245				  0 0x10000000
246
247				  0x01000000 0 0x00000000
248				  0x01000000 0 0x00000000
249				  0 0x00010000>;
250		};
251	};
252
253	pci2: pcie@ffe260000 {
254		reg = <0xf 0xfe260000 0 0x10000>;
255		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
256			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
257		pcie@0 {
258			ranges = <0x02000000 0 0xe0000000
259				  0x02000000 0 0xe0000000
260				  0 0x10000000
261
262				  0x01000000 0 0x00000000
263				  0x01000000 0 0x00000000
264				  0 0x00010000>;
265		};
266	};
267};
268
269#include "t1024si-post.dtsi"
270