xref: /linux/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi (revision b85d45947951d23cb22d90caecf4c1eb81342c96)
1/*
2 * T1023 Silicon/SoC Device Tree Source (post include)
3 *
4 * Copyright 2014 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&ifc {
36	#address-cells = <2>;
37	#size-cells = <1>;
38	compatible = "fsl,ifc", "simple-bus";
39	interrupts = <25 2 0 0>;
40};
41
42&pci0 {
43	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
44	device_type = "pci";
45	#size-cells = <2>;
46	#address-cells = <3>;
47	bus-range = <0x0 0xff>;
48	interrupts = <20 2 0 0>;
49	fsl,iommu-parent = <&pamu0>;
50	pcie@0 {
51		reg = <0 0 0 0 0>;
52		#interrupt-cells = <1>;
53		#size-cells = <2>;
54		#address-cells = <3>;
55		device_type = "pci";
56		interrupts = <20 2 0 0>;
57		interrupt-map-mask = <0xf800 0 0 7>;
58		interrupt-map = <
59			/* IDSEL 0x0 */
60			0000 0 0 1 &mpic 40 1 0 0
61			0000 0 0 2 &mpic 1 1 0 0
62			0000 0 0 3 &mpic 2 1 0 0
63			0000 0 0 4 &mpic 3 1 0 0
64			>;
65	};
66};
67
68&pci1 {
69	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
70	device_type = "pci";
71	#size-cells = <2>;
72	#address-cells = <3>;
73	bus-range = <0 0xff>;
74	interrupts = <21 2 0 0>;
75	fsl,iommu-parent = <&pamu0>;
76	pcie@0 {
77		reg = <0 0 0 0 0>;
78		#interrupt-cells = <1>;
79		#size-cells = <2>;
80		#address-cells = <3>;
81		device_type = "pci";
82		interrupts = <21 2 0 0>;
83		interrupt-map-mask = <0xf800 0 0 7>;
84		interrupt-map = <
85			/* IDSEL 0x0 */
86			0000 0 0 1 &mpic 41 1 0 0
87			0000 0 0 2 &mpic 5 1 0 0
88			0000 0 0 3 &mpic 6 1 0 0
89			0000 0 0 4 &mpic 7 1 0 0
90			>;
91	};
92};
93
94&pci2 {
95	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
96	device_type = "pci";
97	#size-cells = <2>;
98	#address-cells = <3>;
99	bus-range = <0x0 0xff>;
100	interrupts = <22 2 0 0>;
101	fsl,iommu-parent = <&pamu0>;
102	pcie@0 {
103		reg = <0 0 0 0 0>;
104		#interrupt-cells = <1>;
105		#size-cells = <2>;
106		#address-cells = <3>;
107		device_type = "pci";
108		interrupts = <22 2 0 0>;
109		interrupt-map-mask = <0xf800 0 0 7>;
110		interrupt-map = <
111			/* IDSEL 0x0 */
112			0000 0 0 1 &mpic 42 1 0 0
113			0000 0 0 2 &mpic 9 1 0 0
114			0000 0 0 3 &mpic 10 1 0 0
115			0000 0 0 4 &mpic 11 1 0 0
116			>;
117	};
118};
119
120&dcsr {
121	#address-cells = <1>;
122	#size-cells = <1>;
123	compatible = "fsl,dcsr", "simple-bus";
124
125	dcsr-epu@0 {
126		compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
127		interrupts = <52 2 0 0
128			      84 2 0 0
129			      85 2 0 0>;
130		reg = <0x0 0x1000>;
131	};
132	dcsr-npc {
133		compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
134		reg = <0x1000 0x1000 0x1002000 0x10000>;
135	};
136	dcsr-nxc@2000 {
137		compatible = "fsl,dcsr-nxc";
138		reg = <0x2000 0x1000>;
139	};
140	dcsr-corenet {
141		compatible = "fsl,dcsr-corenet";
142		reg = <0x8000 0x1000 0x1A000 0x1000>;
143	};
144	dcsr-ocn@11000 {
145		compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
146		reg = <0x11000 0x1000>;
147	};
148	dcsr-ddr@12000 {
149		compatible = "fsl,dcsr-ddr";
150		dev-handle = <&ddr1>;
151		reg = <0x12000 0x1000>;
152	};
153	dcsr-nal@18000 {
154		compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
155		reg = <0x18000 0x1000>;
156	};
157	dcsr-rcpm@22000 {
158		compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
159		reg = <0x22000 0x1000>;
160	};
161	dcsr-snpc@30000 {
162		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
163		reg = <0x30000 0x1000 0x1022000 0x10000>;
164	};
165	dcsr-snpc@31000 {
166		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
167		reg = <0x31000 0x1000 0x1042000 0x10000>;
168	};
169	dcsr-cpu-sb-proxy@100000 {
170		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
171		cpu-handle = <&cpu0>;
172		reg = <0x100000 0x1000 0x101000 0x1000>;
173	};
174	dcsr-cpu-sb-proxy@108000 {
175		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
176		cpu-handle = <&cpu1>;
177		reg = <0x108000 0x1000 0x109000 0x1000>;
178	};
179};
180
181&soc {
182	#address-cells = <1>;
183	#size-cells = <1>;
184	device_type = "soc";
185	compatible = "simple-bus";
186
187	soc-sram-error {
188		compatible = "fsl,soc-sram-error";
189		interrupts = <16 2 1 29>;
190	};
191
192	corenet-law@0 {
193		compatible = "fsl,corenet-law";
194		reg = <0x0 0x1000>;
195		fsl,num-laws = <16>;
196	};
197
198	ddr1: memory-controller@8000 {
199		compatible = "fsl,qoriq-memory-controller-v5.0",
200				"fsl,qoriq-memory-controller";
201		reg = <0x8000 0x1000>;
202		interrupts = <16 2 1 23>;
203	};
204
205	cpc: l3-cache-controller@10000 {
206		compatible = "fsl,t1023-l3-cache-controller", "cache";
207		reg = <0x10000 0x1000>;
208		interrupts = <16 2 1 27>;
209	};
210
211	corenet-cf@18000 {
212		compatible = "fsl,corenet2-cf";
213		reg = <0x18000 0x1000>;
214		interrupts = <16 2 1 31>;
215	};
216
217	iommu@20000 {
218		compatible = "fsl,pamu-v1.0", "fsl,pamu";
219		reg = <0x20000 0x1000>;
220		ranges = <0 0x20000 0x1000>;
221		#address-cells = <1>;
222		#size-cells = <1>;
223		interrupts = <
224			24 2 0 0
225			16 2 1 30>;
226		pamu0: pamu@0 {
227			reg = <0 0x1000>;
228			fsl,primary-cache-geometry = <128 1>;
229			fsl,secondary-cache-geometry = <32 2>;
230		};
231	};
232
233/include/ "qoriq-mpic.dtsi"
234
235	guts: global-utilities@e0000 {
236		compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
237		reg = <0xe0000 0xe00>;
238		fsl,has-rstcr;
239		fsl,liodn-bits = <12>;
240	};
241
242/include/ "qoriq-clockgen2.dtsi"
243	global-utilities@e1000 {
244		compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
245		mux0: mux0@0 {
246			#clock-cells = <0>;
247			reg = <0x0 4>;
248			compatible = "fsl,core-mux-clock";
249			clocks = <&pll0 0>, <&pll0 1>;
250			clock-names = "pll0_0", "pll0_1";
251			clock-output-names = "cmux0";
252		};
253		mux1: mux1@20 {
254			#clock-cells = <0>;
255			reg = <0x20 4>;
256			compatible = "fsl,core-mux-clock";
257			clocks = <&pll0 0>, <&pll0 1>;
258			clock-names = "pll0_0", "pll0_1";
259			clock-output-names = "cmux1";
260		};
261	};
262
263	rcpm: global-utilities@e2000 {
264		compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.0";
265		reg = <0xe2000 0x1000>;
266	};
267
268	sfp: sfp@e8000 {
269		compatible = "fsl,t1023-sfp";
270		reg = <0xe8000 0x1000>;
271	};
272
273	serdes: serdes@ea000 {
274		compatible = "fsl,t1023-serdes";
275		reg = <0xea000 0x4000>;
276	};
277
278	scfg: global-utilities@fc000 {
279		compatible = "fsl,t1023-scfg";
280		reg = <0xfc000 0x1000>;
281	};
282
283/include/ "elo3-dma-0.dtsi"
284/include/ "elo3-dma-1.dtsi"
285
286/include/ "qoriq-espi-0.dtsi"
287	spi@110000 {
288		fsl,espi-num-chipselects = <4>;
289	};
290
291/include/ "qoriq-esdhc-0.dtsi"
292	sdhc@114000 {
293		compatible = "fsl,t1023-esdhc", "fsl,esdhc";
294		fsl,iommu-parent = <&pamu0>;
295		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
296		sdhci,auto-cmd12;
297		no-1-8-v;
298	};
299/include/ "qoriq-i2c-0.dtsi"
300/include/ "qoriq-i2c-1.dtsi"
301/include/ "qoriq-duart-0.dtsi"
302/include/ "qoriq-duart-1.dtsi"
303/include/ "qoriq-gpio-0.dtsi"
304/include/ "qoriq-gpio-1.dtsi"
305/include/ "qoriq-gpio-2.dtsi"
306/include/ "qoriq-gpio-3.dtsi"
307/include/ "qoriq-usb2-mph-0.dtsi"
308	usb0: usb@210000 {
309		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
310		fsl,iommu-parent = <&pamu0>;
311		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
312		phy_type = "utmi";
313		port0;
314	};
315/include/ "qoriq-usb2-dr-0.dtsi"
316	usb1: usb@211000 {
317		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
318		fsl,iommu-parent = <&pamu0>;
319		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
320		dr_mode = "host";
321		phy_type = "utmi";
322	};
323/include/ "qoriq-sata2-0.dtsi"
324	sata@220000 {
325		fsl,iommu-parent = <&pamu0>;
326		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
327	};
328
329/include/ "qoriq-sec5.0-0.dtsi"
330};
331