1/* 2 * T1023 Silicon/SoC Device Tree Source (post include) 3 * 4 * Copyright 2014 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35#include <dt-bindings/thermal/thermal.h> 36 37&ifc { 38 #address-cells = <2>; 39 #size-cells = <1>; 40 compatible = "fsl,ifc", "simple-bus"; 41 interrupts = <25 2 0 0>; 42}; 43 44&pci0 { 45 compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; 46 device_type = "pci"; 47 #size-cells = <2>; 48 #address-cells = <3>; 49 bus-range = <0x0 0xff>; 50 interrupts = <20 2 0 0>; 51 fsl,iommu-parent = <&pamu0>; 52 pcie@0 { 53 reg = <0 0 0 0 0>; 54 #interrupt-cells = <1>; 55 #size-cells = <2>; 56 #address-cells = <3>; 57 device_type = "pci"; 58 interrupts = <20 2 0 0>; 59 interrupt-map-mask = <0xf800 0 0 7>; 60 interrupt-map = < 61 /* IDSEL 0x0 */ 62 0000 0 0 1 &mpic 40 1 0 0 63 0000 0 0 2 &mpic 1 1 0 0 64 0000 0 0 3 &mpic 2 1 0 0 65 0000 0 0 4 &mpic 3 1 0 0 66 >; 67 }; 68}; 69 70&pci1 { 71 compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; 72 device_type = "pci"; 73 #size-cells = <2>; 74 #address-cells = <3>; 75 bus-range = <0 0xff>; 76 interrupts = <21 2 0 0>; 77 fsl,iommu-parent = <&pamu0>; 78 pcie@0 { 79 reg = <0 0 0 0 0>; 80 #interrupt-cells = <1>; 81 #size-cells = <2>; 82 #address-cells = <3>; 83 device_type = "pci"; 84 interrupts = <21 2 0 0>; 85 interrupt-map-mask = <0xf800 0 0 7>; 86 interrupt-map = < 87 /* IDSEL 0x0 */ 88 0000 0 0 1 &mpic 41 1 0 0 89 0000 0 0 2 &mpic 5 1 0 0 90 0000 0 0 3 &mpic 6 1 0 0 91 0000 0 0 4 &mpic 7 1 0 0 92 >; 93 }; 94}; 95 96&pci2 { 97 compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; 98 device_type = "pci"; 99 #size-cells = <2>; 100 #address-cells = <3>; 101 bus-range = <0x0 0xff>; 102 interrupts = <22 2 0 0>; 103 fsl,iommu-parent = <&pamu0>; 104 pcie@0 { 105 reg = <0 0 0 0 0>; 106 #interrupt-cells = <1>; 107 #size-cells = <2>; 108 #address-cells = <3>; 109 device_type = "pci"; 110 interrupts = <22 2 0 0>; 111 interrupt-map-mask = <0xf800 0 0 7>; 112 interrupt-map = < 113 /* IDSEL 0x0 */ 114 0000 0 0 1 &mpic 42 1 0 0 115 0000 0 0 2 &mpic 9 1 0 0 116 0000 0 0 3 &mpic 10 1 0 0 117 0000 0 0 4 &mpic 11 1 0 0 118 >; 119 }; 120}; 121 122&dcsr { 123 #address-cells = <1>; 124 #size-cells = <1>; 125 compatible = "fsl,dcsr", "simple-bus"; 126 127 dcsr-epu@0 { 128 compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu"; 129 interrupts = <52 2 0 0 130 84 2 0 0 131 85 2 0 0>; 132 reg = <0x0 0x1000>; 133 }; 134 dcsr-npc { 135 compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc"; 136 reg = <0x1000 0x1000 0x1002000 0x10000>; 137 }; 138 dcsr-nxc@2000 { 139 compatible = "fsl,dcsr-nxc"; 140 reg = <0x2000 0x1000>; 141 }; 142 dcsr-corenet { 143 compatible = "fsl,dcsr-corenet"; 144 reg = <0x8000 0x1000 0x1A000 0x1000>; 145 }; 146 dcsr-ocn@11000 { 147 compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn"; 148 reg = <0x11000 0x1000>; 149 }; 150 dcsr-ddr@12000 { 151 compatible = "fsl,dcsr-ddr"; 152 dev-handle = <&ddr1>; 153 reg = <0x12000 0x1000>; 154 }; 155 dcsr-nal@18000 { 156 compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal"; 157 reg = <0x18000 0x1000>; 158 }; 159 dcsr-rcpm@22000 { 160 compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm"; 161 reg = <0x22000 0x1000>; 162 }; 163 dcsr-snpc@30000 { 164 compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc"; 165 reg = <0x30000 0x1000 0x1022000 0x10000>; 166 }; 167 dcsr-snpc@31000 { 168 compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc"; 169 reg = <0x31000 0x1000 0x1042000 0x10000>; 170 }; 171 dcsr-cpu-sb-proxy@100000 { 172 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; 173 cpu-handle = <&cpu0>; 174 reg = <0x100000 0x1000 0x101000 0x1000>; 175 }; 176 dcsr-cpu-sb-proxy@108000 { 177 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; 178 cpu-handle = <&cpu1>; 179 reg = <0x108000 0x1000 0x109000 0x1000>; 180 }; 181}; 182 183&soc { 184 #address-cells = <1>; 185 #size-cells = <1>; 186 device_type = "soc"; 187 compatible = "simple-bus"; 188 189 soc-sram-error { 190 compatible = "fsl,soc-sram-error"; 191 interrupts = <16 2 1 29>; 192 }; 193 194 corenet-law@0 { 195 compatible = "fsl,corenet-law"; 196 reg = <0x0 0x1000>; 197 fsl,num-laws = <16>; 198 }; 199 200 ddr1: memory-controller@8000 { 201 compatible = "fsl,qoriq-memory-controller-v5.0", 202 "fsl,qoriq-memory-controller"; 203 reg = <0x8000 0x1000>; 204 interrupts = <16 2 1 23>; 205 }; 206 207 cpc: l3-cache-controller@10000 { 208 compatible = "fsl,t1023-l3-cache-controller", "cache"; 209 reg = <0x10000 0x1000>; 210 interrupts = <16 2 1 27>; 211 }; 212 213 corenet-cf@18000 { 214 compatible = "fsl,corenet2-cf"; 215 reg = <0x18000 0x1000>; 216 interrupts = <16 2 1 31>; 217 }; 218 219 iommu@20000 { 220 compatible = "fsl,pamu-v1.0", "fsl,pamu"; 221 reg = <0x20000 0x1000>; 222 ranges = <0 0x20000 0x1000>; 223 #address-cells = <1>; 224 #size-cells = <1>; 225 interrupts = < 226 24 2 0 0 227 16 2 1 30>; 228 pamu0: pamu@0 { 229 reg = <0 0x1000>; 230 fsl,primary-cache-geometry = <128 1>; 231 fsl,secondary-cache-geometry = <32 2>; 232 }; 233 }; 234 235/include/ "qoriq-mpic.dtsi" 236 237 guts: global-utilities@e0000 { 238 compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0"; 239 reg = <0xe0000 0xe00>; 240 fsl,has-rstcr; 241 fsl,liodn-bits = <12>; 242 }; 243 244/include/ "qoriq-clockgen2.dtsi" 245 global-utilities@e1000 { 246 compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0"; 247 mux0: mux0@0 { 248 #clock-cells = <0>; 249 reg = <0x0 4>; 250 compatible = "fsl,core-mux-clock"; 251 clocks = <&pll0 0>, <&pll0 1>; 252 clock-names = "pll0_0", "pll0_1"; 253 clock-output-names = "cmux0"; 254 }; 255 mux1: mux1@20 { 256 #clock-cells = <0>; 257 reg = <0x20 4>; 258 compatible = "fsl,core-mux-clock"; 259 clocks = <&pll0 0>, <&pll0 1>; 260 clock-names = "pll0_0", "pll0_1"; 261 clock-output-names = "cmux1"; 262 }; 263 }; 264 265 rcpm: global-utilities@e2000 { 266 compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.1"; 267 reg = <0xe2000 0x1000>; 268 }; 269 270 sfp: sfp@e8000 { 271 compatible = "fsl,t1023-sfp"; 272 reg = <0xe8000 0x1000>; 273 }; 274 275 serdes: serdes@ea000 { 276 compatible = "fsl,t1023-serdes"; 277 reg = <0xea000 0x4000>; 278 }; 279 280 tmu: tmu@f0000 { 281 compatible = "fsl,qoriq-tmu"; 282 reg = <0xf0000 0x1000>; 283 interrupts = <18 2 0 0>; 284 fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; 285 fsl,tmu-calibration = <0x00000000 0x0000000f 286 0x00000001 0x00000017 287 0x00000002 0x0000001e 288 0x00000003 0x00000026 289 0x00000004 0x0000002e 290 0x00000005 0x00000035 291 0x00000006 0x0000003d 292 0x00000007 0x00000044 293 0x00000008 0x0000004c 294 0x00000009 0x00000053 295 0x0000000a 0x0000005b 296 0x0000000b 0x00000064 297 298 0x00010000 0x00000011 299 0x00010001 0x0000001c 300 0x00010002 0x00000024 301 0x00010003 0x0000002b 302 0x00010004 0x00000034 303 0x00010005 0x00000039 304 0x00010006 0x00000042 305 0x00010007 0x0000004c 306 0x00010008 0x00000051 307 0x00010009 0x0000005a 308 0x0001000a 0x00000063 309 310 0x00020000 0x00000013 311 0x00020001 0x00000019 312 0x00020002 0x00000024 313 0x00020003 0x0000002c 314 0x00020004 0x00000035 315 0x00020005 0x0000003d 316 0x00020006 0x00000046 317 0x00020007 0x00000050 318 0x00020008 0x00000059 319 320 0x00030000 0x00000002 321 0x00030001 0x0000000d 322 0x00030002 0x00000019 323 0x00030003 0x00000024>; 324 #thermal-sensor-cells = <0>; 325 }; 326 327 thermal-zones { 328 cpu_thermal: cpu-thermal { 329 polling-delay-passive = <1000>; 330 polling-delay = <5000>; 331 332 thermal-sensors = <&tmu>; 333 334 trips { 335 cpu_alert: cpu-alert { 336 temperature = <85000>; 337 hysteresis = <2000>; 338 type = "passive"; 339 }; 340 cpu_crit: cpu-crit { 341 temperature = <95000>; 342 hysteresis = <2000>; 343 type = "critical"; 344 }; 345 }; 346 347 cooling-maps { 348 map0 { 349 trip = <&cpu_alert>; 350 cooling-device = 351 <&cpu0 THERMAL_NO_LIMIT 352 THERMAL_NO_LIMIT>; 353 }; 354 map1 { 355 trip = <&cpu_alert>; 356 cooling-device = 357 <&cpu1 THERMAL_NO_LIMIT 358 THERMAL_NO_LIMIT>; 359 }; 360 }; 361 }; 362 }; 363 364 scfg: global-utilities@fc000 { 365 compatible = "fsl,t1023-scfg"; 366 reg = <0xfc000 0x1000>; 367 }; 368 369/include/ "elo3-dma-0.dtsi" 370/include/ "elo3-dma-1.dtsi" 371 372/include/ "qoriq-espi-0.dtsi" 373 spi@110000 { 374 fsl,espi-num-chipselects = <4>; 375 }; 376 377/include/ "qoriq-esdhc-0.dtsi" 378 sdhc@114000 { 379 compatible = "fsl,t1023-esdhc", "fsl,esdhc"; 380 fsl,iommu-parent = <&pamu0>; 381 fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ 382 sdhci,auto-cmd12; 383 no-1-8-v; 384 }; 385/include/ "qoriq-i2c-0.dtsi" 386/include/ "qoriq-i2c-1.dtsi" 387/include/ "qoriq-duart-0.dtsi" 388/include/ "qoriq-duart-1.dtsi" 389/include/ "qoriq-gpio-0.dtsi" 390/include/ "qoriq-gpio-1.dtsi" 391/include/ "qoriq-gpio-2.dtsi" 392/include/ "qoriq-gpio-3.dtsi" 393/include/ "qoriq-usb2-mph-0.dtsi" 394 usb0: usb@210000 { 395 compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; 396 fsl,iommu-parent = <&pamu0>; 397 fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ 398 phy_type = "utmi"; 399 port0; 400 }; 401/include/ "qoriq-usb2-dr-0.dtsi" 402 usb1: usb@211000 { 403 compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; 404 fsl,iommu-parent = <&pamu0>; 405 fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ 406 dr_mode = "host"; 407 phy_type = "utmi"; 408 }; 409/include/ "qoriq-sata2-0.dtsi" 410 sata@220000 { 411 fsl,iommu-parent = <&pamu0>; 412 fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ 413 }; 414 415/include/ "qoriq-sec5.0-0.dtsi" 416 417/include/ "qoriq-fman3l-0.dtsi" 418/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi" 419/include/ "qoriq-fman3-0-1g-1.dtsi" 420/include/ "qoriq-fman3-0-1g-2.dtsi" 421/include/ "qoriq-fman3-0-1g-3.dtsi" 422 fman@400000 { 423 enet0: ethernet@e0000 { 424 }; 425 426 enet1: ethernet@e2000 { 427 }; 428 429 enet2: ethernet@e4000 { 430 }; 431 432 enet3: ethernet@e6000 { 433 }; 434 }; 435}; 436