1/* 2 * T1023 RDB Device Tree Source 3 * 4 * Copyright 2014 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35/include/ "t102xsi-pre.dtsi" 36 37/ { 38 model = "fsl,T1023RDB"; 39 compatible = "fsl,T1023RDB"; 40 #address-cells = <2>; 41 #size-cells = <2>; 42 interrupt-parent = <&mpic>; 43 44 reserved-memory { 45 #address-cells = <2>; 46 #size-cells = <2>; 47 ranges; 48 49 bman_fbpr: bman-fbpr { 50 size = <0 0x1000000>; 51 alignment = <0 0x1000000>; 52 }; 53 54 qman_fqd: qman-fqd { 55 size = <0 0x400000>; 56 alignment = <0 0x400000>; 57 }; 58 59 qman_pfdr: qman-pfdr { 60 size = <0 0x2000000>; 61 alignment = <0 0x2000000>; 62 }; 63 }; 64 65 ifc: localbus@ffe124000 { 66 reg = <0xf 0xfe124000 0 0x2000>; 67 ranges = <0 0 0xf 0xe8000000 0x08000000 68 1 0 0xf 0xff800000 0x00010000>; 69 70 nor@0,0 { 71 #address-cells = <1>; 72 #size-cells = <1>; 73 status = "disabled"; 74 compatible = "cfi-flash"; 75 reg = <0x0 0x0 0x8000000>; 76 bank-width = <2>; 77 device-width = <1>; 78 }; 79 80 nand@1,0 { 81 #address-cells = <1>; 82 #size-cells = <1>; 83 compatible = "fsl,ifc-nand"; 84 reg = <0x1 0x0 0x10000>; 85 }; 86 }; 87 88 memory { 89 device_type = "memory"; 90 }; 91 92 dcsr: dcsr@f00000000 { 93 ranges = <0x00000000 0xf 0x00000000 0x01072000>; 94 }; 95 96 bportals: bman-portals@ff4000000 { 97 ranges = <0x0 0xf 0xf4000000 0x2000000>; 98 }; 99 100 qportals: qman-portals@ff6000000 { 101 ranges = <0x0 0xf 0xf6000000 0x2000000>; 102 }; 103 104 soc: soc@ffe000000 { 105 ranges = <0x00000000 0xf 0xfe000000 0x1000000>; 106 reg = <0xf 0xfe000000 0 0x00001000>; 107 spi@110000 { 108 flash@0 { 109 #address-cells = <1>; 110 #size-cells = <1>; 111 compatible = "spansion,s25fl512s", "jedec,spi-nor"; 112 reg = <0>; 113 spi-max-frequency = <10000000>; /* input clk */ 114 }; 115 }; 116 117 i2c@118000 { 118 eeprom@50 { 119 compatible = "st,m24256"; 120 reg = <0x50>; 121 }; 122 123 rtc@68 { 124 compatible = "dallas,ds1339"; 125 reg = <0x68>; 126 interrupts = <0x5 0x1 0 0>; 127 }; 128 }; 129 130 i2c@118100 { 131 current-sensor@40 { 132 compatible = "ti,ina220"; 133 reg = <0x40>; 134 shunt-resistor = <1000>; 135 }; 136 137 current-sensor@41 { 138 compatible = "ti,ina220"; 139 reg = <0x41>; 140 shunt-resistor = <1000>; 141 }; 142 }; 143 144 fman@400000 { 145 fm1mac1: ethernet@e0000 { 146 phy-handle = <&sgmii_rtk_phy2>; 147 phy-connection-type = "sgmii"; 148 sleep = <&rcpm 0x80000000>; 149 }; 150 151 fm1mac2: ethernet@e2000 { 152 sleep = <&rcpm 0x40000000>; 153 }; 154 155 fm1mac3: ethernet@e4000 { 156 phy-handle = <&sgmii_aqr_phy3>; 157 phy-connection-type = "sgmii-2500"; 158 sleep = <&rcpm 0x20000000>; 159 }; 160 161 fm1mac4: ethernet@e6000 { 162 phy-handle = <&rgmii_rtk_phy1>; 163 phy-connection-type = "rgmii"; 164 sleep = <&rcpm 0x10000000>; 165 }; 166 167 168 mdio0: mdio@fc000 { 169 rgmii_rtk_phy1: ethernet-phy@1 { 170 reg = <0x1>; 171 }; 172 sgmii_rtk_phy2: ethernet-phy@3 { 173 reg = <0x3>; 174 }; 175 }; 176 177 xmdio0: mdio@fd000 { 178 sgmii_aqr_phy3: ethernet-phy@2 { 179 compatible = "ethernet-phy-ieee802.3-c45"; 180 reg = <0x2>; 181 }; 182 }; 183 }; 184 }; 185 186 pci0: pcie@ffe240000 { 187 reg = <0xf 0xfe240000 0 0x10000>; 188 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 189 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; 190 pcie@0 { 191 ranges = <0x02000000 0 0xe0000000 192 0x02000000 0 0xe0000000 193 0 0x10000000 194 195 0x01000000 0 0x00000000 196 0x01000000 0 0x00000000 197 0 0x00010000>; 198 }; 199 }; 200 201 pci1: pcie@ffe250000 { 202 reg = <0xf 0xfe250000 0 0x10000>; 203 ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 204 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; 205 pcie@0 { 206 ranges = <0x02000000 0 0xe0000000 207 0x02000000 0 0xe0000000 208 0 0x10000000 209 210 0x01000000 0 0x00000000 211 0x01000000 0 0x00000000 212 0 0x00010000>; 213 }; 214 }; 215 216 pci2: pcie@ffe260000 { 217 reg = <0xf 0xfe260000 0 0x10000>; 218 ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 219 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; 220 pcie@0 { 221 ranges = <0x02000000 0 0xe0000000 222 0x02000000 0 0xe0000000 223 0 0x10000000 224 225 0x01000000 0 0x00000000 226 0x01000000 0 0x00000000 227 0 0x00010000>; 228 }; 229 }; 230}; 231 232#include "t1023si-post.dtsi" 233