xref: /linux/arch/powerpc/boot/dts/fsl/ppa8548.dts (revision 26fbb4c8c7c3ee9a4c3b4de555a8587b5a19154e) 
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * PPA8548 Device Tree Source (36-bit address map)
4 * Copyright 2013 Prodrive B.V.
5 *
6 * Based on:
7 * MPC8548 CDS Device Tree Source (36-bit address map)
8 * Copyright 2012 Freescale Semiconductor Inc.
9 */
10
11/include/ "mpc8548si-pre.dtsi"
12
13/ {
14	model = "ppa8548";
15	compatible = "ppa8548";
16	#address-cells = <2>;
17	#size-cells = <2>;
18	interrupt-parent = <&mpic>;
19
20	memory {
21		device_type = "memory";
22		reg = <0 0 0x0 0x40000000>;
23	};
24
25	lbc: localbus@fe0005000 {
26		reg = <0xf 0xe0005000 0 0x1000>;
27		ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
28	};
29
30	soc: soc8548@fe0000000 {
31		ranges = <0 0xf 0xe0000000 0x100000>;
32	};
33
34	pci0: pci@fe0008000 {
35		/* ppa8548 board doesn't support PCI */
36		status = "disabled";
37	};
38
39	pci1: pci@fe0009000 {
40		/* ppa8548 board doesn't support PCI */
41		status = "disabled";
42	};
43
44	pci2: pcie@fe000a000 {
45		/* ppa8548 board doesn't support PCI */
46		status = "disabled";
47	};
48
49	rio: rapidio@fe00c0000 {
50		reg = <0xf 0xe00c0000 0x0 0x11000>;
51		port1 {
52			ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
53		};
54	};
55};
56
57&lbc {
58	nor@0 {
59		#address-cells = <1>;
60		#size-cells = <1>;
61		compatible = "cfi-flash";
62		reg = <0x0 0x0 0x00800000>;
63		bank-width = <2>;
64		device-width = <2>;
65
66		partition@0 {
67			reg = <0x0 0x7A0000>;
68			label = "user";
69		};
70
71		partition@7A0000 {
72			reg = <0x7A0000 0x20000>;
73			label = "env";
74			read-only;
75		};
76
77		partition@7C0000 {
78			reg = <0x7C0000 0x40000>;
79			label = "u-boot";
80			read-only;
81		};
82	};
83};
84
85&soc {
86	i2c@3000 {
87		rtc@6f {
88			compatible = "intersil,isl1208";
89			reg = <0x6f>;
90		};
91	};
92
93	i2c@3100 {
94	};
95
96	/*
97	 * Only ethernet controller @25000 and @26000 are used.
98	 * Use alias enet2 and enet3 for the remainig controllers,
99	 * to stay compatible with mpc8548si-pre.dtsi.
100	 */
101	enet2: ethernet@24000 {
102		status = "disabled";
103	};
104
105	mdio@24520 {
106		phy0: ethernet-phy@0 {
107			interrupts = <7 1 0 0>;
108			reg = <0x0>;
109		};
110		phy1: ethernet-phy@1 {
111			interrupts = <8 1 0 0>;
112			reg = <0x1>;
113		};
114		tbi0: tbi-phy@11 {
115			reg = <0x11>;
116			device_type = "tbi-phy";
117		};
118	};
119
120	enet0: ethernet@25000 {
121		tbi-handle = <&tbi1>;
122		phy-handle = <&phy0>;
123	};
124
125	mdio@25520 {
126		tbi1: tbi-phy@11 {
127			reg = <0x11>;
128			device_type = "tbi-phy";
129		};
130	};
131
132	enet1: ethernet@26000 {
133		tbi-handle = <&tbi2>;
134		phy-handle = <&phy1>;
135	};
136
137	mdio@26520 {
138		tbi2: tbi-phy@11 {
139			reg = <0x11>;
140			device_type = "tbi-phy";
141		};
142	};
143
144	enet3: ethernet@27000 {
145		status = "disabled";
146	};
147
148	mdio@27520 {
149		tbi3: tbi-phy@11 {
150			reg = <0x11>;
151			device_type = "tbi-phy";
152		};
153	};
154
155	crypto@30000 {
156		status = "disabled";
157	};
158};
159
160/include/ "mpc8548si-post.dtsi"
161