xref: /linux/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi (revision b9f12a5d97f652c77ef6803dccd0d40d1290f5be)
1/*
2 * P2041/P2040 Silicon/SoC Device Tree Source (post include)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&lbc {
36	compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
37	interrupts = <25 2 0 0>;
38	#address-cells = <2>;
39	#size-cells = <1>;
40};
41
42/* controller at 0x200000 */
43&pci0 {
44	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
45	device_type = "pci";
46	#size-cells = <2>;
47	#address-cells = <3>;
48	bus-range = <0x0 0xff>;
49	clock-frequency = <33333333>;
50	interrupts = <16 2 1 15>;
51	fsl,iommu-parent = <&pamu0>;
52	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
53	pcie@0 {
54		reg = <0 0 0 0 0>;
55		#interrupt-cells = <1>;
56		#size-cells = <2>;
57		#address-cells = <3>;
58		device_type = "pci";
59		interrupts = <16 2 1 15>;
60		interrupt-map-mask = <0xf800 0 0 7>;
61		interrupt-map = <
62			/* IDSEL 0x0 */
63			0000 0 0 1 &mpic 40 1 0 0
64			0000 0 0 2 &mpic 1 1 0 0
65			0000 0 0 3 &mpic 2 1 0 0
66			0000 0 0 4 &mpic 3 1 0 0
67			>;
68	};
69};
70
71/* controller at 0x201000 */
72&pci1 {
73	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
74	device_type = "pci";
75	#size-cells = <2>;
76	#address-cells = <3>;
77	bus-range = <0 0xff>;
78	clock-frequency = <33333333>;
79	interrupts = <16 2 1 14>;
80	fsl,iommu-parent = <&pamu0>;
81	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
82	pcie@0 {
83		reg = <0 0 0 0 0>;
84		#interrupt-cells = <1>;
85		#size-cells = <2>;
86		#address-cells = <3>;
87		device_type = "pci";
88		interrupts = <16 2 1 14>;
89		interrupt-map-mask = <0xf800 0 0 7>;
90		interrupt-map = <
91			/* IDSEL 0x0 */
92			0000 0 0 1 &mpic 41 1 0 0
93			0000 0 0 2 &mpic 5 1 0 0
94			0000 0 0 3 &mpic 6 1 0 0
95			0000 0 0 4 &mpic 7 1 0 0
96			>;
97	};
98};
99
100/* controller at 0x202000 */
101&pci2 {
102	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
103	device_type = "pci";
104	#size-cells = <2>;
105	#address-cells = <3>;
106	bus-range = <0x0 0xff>;
107	clock-frequency = <33333333>;
108	interrupts = <16 2 1 13>;
109	fsl,iommu-parent = <&pamu0>;
110	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
111	pcie@0 {
112		reg = <0 0 0 0 0>;
113		#interrupt-cells = <1>;
114		#size-cells = <2>;
115		#address-cells = <3>;
116		device_type = "pci";
117		interrupts = <16 2 1 13>;
118		interrupt-map-mask = <0xf800 0 0 7>;
119		interrupt-map = <
120			/* IDSEL 0x0 */
121			0000 0 0 1 &mpic 42 1 0 0
122			0000 0 0 2 &mpic 9 1 0 0
123			0000 0 0 3 &mpic 10 1 0 0
124			0000 0 0 4 &mpic 11 1 0 0
125			>;
126	};
127};
128
129&rio {
130	compatible = "fsl,srio";
131	interrupts = <16 2 1 11>;
132	#address-cells = <2>;
133	#size-cells = <2>;
134	fsl,iommu-parent = <&pamu0>;
135	ranges;
136
137	port1 {
138		#address-cells = <2>;
139		#size-cells = <2>;
140		cell-index = <1>;
141		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
142	};
143
144	port2 {
145		#address-cells = <2>;
146		#size-cells = <2>;
147		cell-index = <2>;
148		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
149	};
150};
151
152&dcsr {
153	#address-cells = <1>;
154	#size-cells = <1>;
155	compatible = "fsl,dcsr", "simple-bus";
156
157	dcsr-epu@0 {
158		compatible = "fsl,p2041-dcsr-epu", "fsl,dcsr-epu";
159		interrupts = <52 2 0 0
160			      84 2 0 0
161			      85 2 0 0>;
162		reg = <0x0 0x1000>;
163	};
164	dcsr-npc {
165		compatible = "fsl,dcsr-npc";
166		reg = <0x1000 0x1000 0x1000000 0x8000>;
167	};
168	dcsr-nxc@2000 {
169		compatible = "fsl,dcsr-nxc";
170		reg = <0x2000 0x1000>;
171	};
172	dcsr-corenet {
173		compatible = "fsl,dcsr-corenet";
174		reg = <0x8000 0x1000 0xB0000 0x1000>;
175	};
176	dcsr-dpaa@9000 {
177		compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
178		reg = <0x9000 0x1000>;
179	};
180	dcsr-ocn@11000 {
181		compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
182		reg = <0x11000 0x1000>;
183	};
184	dcsr-ddr@12000 {
185		compatible = "fsl,dcsr-ddr";
186		dev-handle = <&ddr1>;
187		reg = <0x12000 0x1000>;
188	};
189	dcsr-nal@18000 {
190		compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
191		reg = <0x18000 0x1000>;
192	};
193	dcsr-rcpm@22000 {
194		compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
195		reg = <0x22000 0x1000>;
196	};
197	dcsr-cpu-sb-proxy@40000 {
198		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
199		cpu-handle = <&cpu0>;
200		reg = <0x40000 0x1000>;
201	};
202	dcsr-cpu-sb-proxy@41000 {
203		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
204		cpu-handle = <&cpu1>;
205		reg = <0x41000 0x1000>;
206	};
207	dcsr-cpu-sb-proxy@42000 {
208		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
209		cpu-handle = <&cpu2>;
210		reg = <0x42000 0x1000>;
211	};
212	dcsr-cpu-sb-proxy@43000 {
213		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
214		cpu-handle = <&cpu3>;
215		reg = <0x43000 0x1000>;
216	};
217};
218
219&soc {
220	#address-cells = <1>;
221	#size-cells = <1>;
222	device_type = "soc";
223	compatible = "simple-bus";
224
225	soc-sram-error {
226		compatible = "fsl,soc-sram-error";
227		interrupts = <16 2 1 29>;
228	};
229
230	corenet-law@0 {
231		compatible = "fsl,corenet-law";
232		reg = <0x0 0x1000>;
233		fsl,num-laws = <32>;
234	};
235
236	ddr1: memory-controller@8000 {
237		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
238		reg = <0x8000 0x1000>;
239		interrupts = <16 2 1 23>;
240	};
241
242	cpc: l3-cache-controller@10000 {
243		compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
244		reg = <0x10000 0x1000>;
245		interrupts = <16 2 1 27>;
246	};
247
248	corenet-cf@18000 {
249		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
250		reg = <0x18000 0x1000>;
251		interrupts = <16 2 1 31>;
252		fsl,ccf-num-csdids = <32>;
253		fsl,ccf-num-snoopids = <32>;
254	};
255
256	iommu@20000 {
257		compatible = "fsl,pamu-v1.0", "fsl,pamu";
258		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
259		ranges = <0 0x20000 0x4000>;
260		#address-cells = <1>;
261		#size-cells = <1>;
262		interrupts = <
263			24 2 0 0
264			16 2 1 30>;
265		fsl,portid-mapping = <0x0f000000>;
266
267		pamu0: pamu@0 {
268			reg = <0 0x1000>;
269			fsl,primary-cache-geometry = <32 1>;
270			fsl,secondary-cache-geometry = <128 2>;
271		};
272
273		pamu1: pamu@1000 {
274			reg = <0x1000 0x1000>;
275			fsl,primary-cache-geometry = <32 1>;
276			fsl,secondary-cache-geometry = <128 2>;
277		};
278
279		pamu2: pamu@2000 {
280			reg = <0x2000 0x1000>;
281			fsl,primary-cache-geometry = <32 1>;
282			fsl,secondary-cache-geometry = <128 2>;
283		};
284
285		pamu3: pamu@3000 {
286			reg = <0x3000 0x1000>;
287			fsl,primary-cache-geometry = <32 1>;
288			fsl,secondary-cache-geometry = <128 2>;
289		};
290	};
291
292/include/ "qoriq-mpic.dtsi"
293
294	guts: global-utilities@e0000 {
295		compatible = "fsl,qoriq-device-config-1.0";
296		reg = <0xe0000 0xe00>;
297		fsl,has-rstcr;
298		#sleep-cells = <1>;
299		fsl,liodn-bits = <12>;
300	};
301
302	pins: global-utilities@e0e00 {
303		compatible = "fsl,qoriq-pin-control-1.0";
304		reg = <0xe0e00 0x200>;
305		#sleep-cells = <2>;
306	};
307
308	clockgen: global-utilities@e1000 {
309		compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
310		ranges = <0x0 0xe1000 0x1000>;
311		reg = <0xe1000 0x1000>;
312		clock-frequency = <0>;
313		#address-cells = <1>;
314		#size-cells = <1>;
315
316		sysclk: sysclk {
317			#clock-cells = <0>;
318			compatible = "fsl,qoriq-sysclk-1.0";
319			clock-output-names = "sysclk";
320		};
321
322		pll0: pll0@800 {
323			#clock-cells = <1>;
324			reg = <0x800 0x4>;
325			compatible = "fsl,qoriq-core-pll-1.0";
326			clocks = <&sysclk>;
327			clock-output-names = "pll0", "pll0-div2";
328		};
329
330		pll1: pll1@820 {
331			#clock-cells = <1>;
332			reg = <0x820 0x4>;
333			compatible = "fsl,qoriq-core-pll-1.0";
334			clocks = <&sysclk>;
335			clock-output-names = "pll1", "pll1-div2";
336		};
337
338		mux0: mux0@0 {
339			#clock-cells = <0>;
340			reg = <0x0 0x4>;
341			compatible = "fsl,qoriq-core-mux-1.0";
342			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
343			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
344			clock-output-names = "cmux0";
345		};
346
347		mux1: mux1@20 {
348			#clock-cells = <0>;
349			reg = <0x20 0x4>;
350			compatible = "fsl,qoriq-core-mux-1.0";
351			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
352			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
353			clock-output-names = "cmux1";
354		};
355
356		mux2: mux2@40 {
357			#clock-cells = <0>;
358			reg = <0x40 0x4>;
359			compatible = "fsl,qoriq-core-mux-1.0";
360			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
361			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
362		};
363
364		mux3: mux3@60 {
365			#clock-cells = <0>;
366			reg = <0x60 0x4>;
367			compatible = "fsl,qoriq-core-mux-1.0";
368			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
369			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
370			clock-output-names = "cmux3";
371		};
372	};
373
374	rcpm: global-utilities@e2000 {
375		compatible = "fsl,qoriq-rcpm-1.0";
376		reg = <0xe2000 0x1000>;
377		#sleep-cells = <1>;
378	};
379
380	sfp: sfp@e8000 {
381		compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
382		reg	   = <0xe8000 0x1000>;
383	};
384
385	serdes: serdes@ea000 {
386		compatible = "fsl,p2041-serdes";
387		reg	   = <0xea000 0x1000>;
388	};
389
390/include/ "qoriq-dma-0.dtsi"
391	dma@100300 {
392		fsl,iommu-parent = <&pamu0>;
393		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
394	};
395
396/include/ "qoriq-dma-1.dtsi"
397	dma@101300 {
398		fsl,iommu-parent = <&pamu0>;
399		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
400	};
401
402/include/ "qoriq-espi-0.dtsi"
403	spi@110000 {
404		fsl,espi-num-chipselects = <4>;
405	};
406
407/include/ "qoriq-esdhc-0.dtsi"
408	sdhc@114000 {
409		fsl,iommu-parent = <&pamu1>;
410		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
411		sdhci,auto-cmd12;
412	};
413
414/include/ "qoriq-i2c-0.dtsi"
415/include/ "qoriq-i2c-1.dtsi"
416/include/ "qoriq-duart-0.dtsi"
417/include/ "qoriq-duart-1.dtsi"
418/include/ "qoriq-gpio-0.dtsi"
419/include/ "qoriq-usb2-mph-0.dtsi"
420	usb0: usb@210000 {
421		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
422		phy_type = "utmi";
423		fsl,iommu-parent = <&pamu1>;
424		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
425		port0;
426	};
427
428/include/ "qoriq-usb2-dr-0.dtsi"
429	usb1: usb@211000 {
430		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
431		fsl,iommu-parent = <&pamu1>;
432		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
433		dr_mode = "host";
434		phy_type = "utmi";
435	};
436
437/include/ "qoriq-sata2-0.dtsi"
438	sata@220000 {
439		fsl,iommu-parent = <&pamu1>;
440		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
441	};
442
443/include/ "qoriq-sata2-1.dtsi"
444	sata@221000 {
445		fsl,iommu-parent = <&pamu1>;
446		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
447	};
448
449/include/ "qoriq-sec4.2-0.dtsi"
450crypto: crypto@300000 {
451		fsl,iommu-parent = <&pamu1>;
452	};
453};
454