xref: /linux/arch/powerpc/boot/dts/fsl/kmcoge4.dts (revision 40d269c000bda9fcd276a0412a9cebd3f6e344c5)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
4 *
5 * (C) Copyright 2014
6 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
7 *
8 * Copyright 2011 Freescale Semiconductor Inc.
9 */
10
11/include/ "p2041si-pre.dtsi"
12
13/ {
14	model = "keymile,kmcoge4";
15	compatible = "keymile,kmcoge4", "keymile,kmp204x";
16	#address-cells = <2>;
17	#size-cells = <2>;
18	interrupt-parent = <&mpic>;
19
20	memory {
21		device_type = "memory";
22	};
23
24	reserved-memory {
25		#address-cells = <2>;
26		#size-cells = <2>;
27		ranges;
28
29		bman_fbpr: bman-fbpr {
30			size = <0 0x1000000>;
31			alignment = <0 0x1000000>;
32		};
33		qman_fqd: qman-fqd {
34			size = <0 0x400000>;
35			alignment = <0 0x400000>;
36		};
37		qman_pfdr: qman-pfdr {
38			size = <0 0x2000000>;
39			alignment = <0 0x2000000>;
40		};
41	};
42
43	dcsr: dcsr@f00000000 {
44		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
45	};
46
47	bportals: bman-portals@ff4000000 {
48		ranges = <0x0 0xf 0xf4000000 0x200000>;
49	};
50
51	qportals: qman-portals@ff4200000 {
52		ranges = <0x0 0xf 0xf4200000 0x200000>;
53	};
54
55	soc: soc@ffe000000 {
56		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
57		reg = <0xf 0xfe000000 0 0x00001000>;
58		spi@110000 {
59			flash@0 {
60				#address-cells = <1>;
61				#size-cells = <1>;
62				compatible = "spansion,s25fl256s1", "jedec,spi-nor";
63				reg = <0>;
64				spi-max-frequency = <20000000>; /* input clock */
65			};
66
67			network_clock@1 {
68				compatible = "zarlink,zl30343";
69				reg = <1>;
70				spi-max-frequency = <8000000>;
71			};
72
73			flash@2 {
74				#address-cells = <1>;
75				#size-cells = <1>;
76				compatible = "micron,m25p32", "jedec,spi-nor";
77				reg = <2>;
78				spi-max-frequency = <15000000>;
79			};
80		};
81
82		sdhc@114000 {
83			status = "disabled";
84		};
85
86		i2c@119000 {
87			status = "disabled";
88		};
89
90		i2c@119100 {
91			status = "disabled";
92		};
93
94		usb0: usb@210000 {
95			status = "disabled";
96		};
97
98		usb1: usb@211000 {
99			status = "disabled";
100		};
101
102		sata@220000 {
103			status = "disabled";
104		};
105
106		sata@221000 {
107			status = "disabled";
108		};
109
110		fman0: fman@400000 {
111			enet0: ethernet@e0000 {
112				phy-connection-type = "sgmii";
113				fixed-link {
114					speed = <1000>;
115					full-duplex;
116				};
117			};
118			mdio0: mdio@e1120 {
119				front_phy: ethernet-phy@11 {
120					reg = <0x11>;
121				};
122			};
123
124			enet1: ethernet@e2000 {
125				phy-connection-type = "sgmii";
126				fixed-link {
127					speed = <1000>;
128					full-duplex;
129				};
130			};
131			enet2: ethernet@e4000 {
132				status = "disabled";
133			};
134
135			enet3: ethernet@e6000 {
136				status = "disabled";
137			};
138			enet4: ethernet@e8000 {
139				phy-handle = <&front_phy>;
140				phy-connection-type = "rgmii";
141			};
142			enet5: ethernet@f0000 {
143				status = "disabled";
144			};
145		};
146	};
147
148	rio: rapidio@ffe0c0000 {
149		status = "disabled";
150	};
151
152	lbc: localbus@ffe124000 {
153		reg = <0xf 0xfe124000 0 0x1000>;
154		ranges = <0 0 0xf 0xffa00000 0x00040000		/* LB 0 */
155			  1 0 0xf 0xfb000000 0x00010000		/* LB 1 */
156			  2 0 0xf 0xd0000000 0x10000000		/* LB 2 */
157			  3 0 0xf 0xe0000000 0x10000000>;	/* LB 3 */
158
159		nand@0,0 {
160			#address-cells = <1>;
161			#size-cells = <1>;
162			compatible = "fsl,elbc-fcm-nand";
163			reg = <0 0 0x40000>;
164		};
165
166		board-control@1,0 {
167			compatible = "keymile,qriox";
168			reg = <1 0 0x80>;
169		};
170
171		chassis-mgmt@3,0 {
172			compatible = "keymile,bfticu";
173			interrupt-controller;
174			#interrupt-cells = <2>;
175			reg = <3 0 0x100>;
176			interrupt-parent = <&mpic>;
177			interrupts = <6 1 0 0>;
178		};
179	};
180
181	pci0: pcie@ffe200000 {
182		reg = <0xf 0xfe200000 0 0x1000>;
183		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
184			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
185		pcie@0 {
186			ranges = <0x02000000 0 0xe0000000
187				  0x02000000 0 0xe0000000
188				  0 0x20000000
189
190				  0x01000000 0 0x00000000
191				  0x01000000 0 0x00000000
192				  0 0x00010000>;
193		};
194	};
195
196	pci1: pcie@ffe201000 {
197		status = "disabled";
198	};
199
200	pci2: pcie@ffe202000 {
201		reg = <0xf 0xfe202000 0 0x1000>;
202		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
203			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
204		pcie@0 {
205			ranges = <0x02000000 0 0xe0000000
206				  0x02000000 0 0xe0000000
207				  0 0x20000000
208
209				  0x01000000 0 0x00000000
210				  0x01000000 0 0x00000000
211				  0 0x00010000>;
212		};
213	};
214};
215
216/include/ "p2041si-post.dtsi"
217