1/* 2 * BSC9132 Silicon/SoC Device Tree Source (post include) 3 * 4 * Copyright 2014 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&ifc { 36 #address-cells = <2>; 37 #size-cells = <1>; 38 compatible = "fsl,ifc", "simple-bus"; 39 /* FIXME: Test whether interrupts are split */ 40 interrupts = <16 2 0 0 20 2 0 0>; 41}; 42 43/* controller at 0xa000 */ 44&pci0 { 45 compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2"; 46 device_type = "pci"; 47 #size-cells = <2>; 48 #address-cells = <3>; 49 bus-range = <0 255>; 50 interrupts = <16 2 0 0>; 51 52 pcie@0 { 53 reg = <0 0 0 0 0>; 54 #interrupt-cells = <1>; 55 #size-cells = <2>; 56 #address-cells = <3>; 57 device_type = "pci"; 58 interrupts = <16 2 0 0>; 59 interrupt-map-mask = <0xf800 0 0 7>; 60 61 interrupt-map = < 62 /* IDSEL 0x0 */ 63 0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0 64 0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0 65 0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0 66 0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0 67 >; 68 }; 69}; 70 71&soc { 72 #address-cells = <1>; 73 #size-cells = <1>; 74 device_type = "soc"; 75 compatible = "fsl,bsc9132-immr", "simple-bus"; 76 bus-frequency = <0>; // Filled out by uboot. 77 78 ecm-law@0 { 79 compatible = "fsl,ecm-law"; 80 reg = <0x0 0x1000>; 81 fsl,num-laws = <12>; 82 }; 83 84 ecm@1000 { 85 compatible = "fsl,bsc9132-ecm", "fsl,ecm"; 86 reg = <0x1000 0x1000>; 87 interrupts = <16 2 0 0>; 88 }; 89 90 memory-controller@2000 { 91 compatible = "fsl,bsc9132-memory-controller"; 92 reg = <0x2000 0x1000>; 93 interrupts = <16 2 1 8>; 94 }; 95 96/include/ "pq3-i2c-0.dtsi" 97 i2c@3000 { 98 interrupts = <17 2 0 0>; 99 }; 100 101/include/ "pq3-i2c-1.dtsi" 102 i2c@3100 { 103 interrupts = <17 2 0 0>; 104 }; 105 106/include/ "pq3-duart-0.dtsi" 107 serial0: serial@4500 { 108 interrupts = <18 2 0 0>; 109 }; 110 111 serial1: serial@4600 { 112 interrupts = <18 2 0 0 >; 113 }; 114/include/ "pq3-espi-0.dtsi" 115 spi0: spi@7000 { 116 fsl,espi-num-chipselects = <1>; 117 interrupts = <22 0x2 0 0>; 118 }; 119 120/include/ "pq3-gpio-0.dtsi" 121 gpio-controller@f000 { 122 interrupts = <19 0x2 0 0>; 123 }; 124 125 L2: l2-cache-controller@20000 { 126 compatible = "fsl,bsc9132-l2-cache-controller"; 127 reg = <0x20000 0x1000>; 128 cache-line-size = <32>; // 32 bytes 129 cache-size = <0x40000>; // L2,256K 130 interrupts = <16 2 1 0>; 131 }; 132 133/include/ "pq3-dma-0.dtsi" 134 135dma@21300 { 136 137 dma-channel@0 { 138 interrupts = <62 2 0 0>; 139 }; 140 141 dma-channel@80 { 142 interrupts = <63 2 0 0>; 143 }; 144 145 dma-channel@100 { 146 interrupts = <64 2 0 0>; 147 }; 148 149 dma-channel@180 { 150 interrupts = <65 2 0 0>; 151 }; 152}; 153 154/include/ "pq3-usb2-dr-0.dtsi" 155usb@22000 { 156 compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2"; 157 interrupts = <40 0x2 0 0>; 158}; 159 160/include/ "pq3-esdhc-0.dtsi" 161 sdhc@2e000 { 162 fsl,sdhci-auto-cmd12; 163 interrupts = <41 0x2 0 0>; 164 }; 165 166/include/ "pq3-sec4.4-0.dtsi" 167crypto@30000 { 168 interrupts = <57 2 0 0>; 169 170 sec_jr0: jr@1000 { 171 interrupts = <58 2 0 0>; 172 }; 173 174 sec_jr1: jr@2000 { 175 interrupts = <59 2 0 0>; 176 }; 177 178 sec_jr2: jr@3000 { 179 interrupts = <60 2 0 0>; 180 }; 181 182 sec_jr3: jr@4000 { 183 interrupts = <61 2 0 0>; 184 }; 185}; 186 187/include/ "pq3-mpic.dtsi" 188/include/ "pq3-mpic-timer-B.dtsi" 189 190/include/ "pq3-etsec2-0.dtsi" 191enet0: ethernet@b0000 { 192 queue-group@b0000 { 193 fsl,rx-bit-map = <0xff>; 194 fsl,tx-bit-map = <0xff>; 195 interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>; 196 }; 197}; 198 199/include/ "pq3-etsec2-1.dtsi" 200enet1: ethernet@b1000 { 201 queue-group@b1000 { 202 fsl,rx-bit-map = <0xff>; 203 fsl,tx-bit-map = <0xff>; 204 interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>; 205 }; 206}; 207 208global-utilities@e0000 { 209 compatible = "fsl,bsc9132-guts"; 210 reg = <0xe0000 0x1000>; 211 fsl,has-rstcr; 212 }; 213}; 214