1/* 2 * BSC9131 Silicon/SoC Device Tree Source (post include) 3 * 4 * Copyright 2011-2012 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&ifc { 36 #address-cells = <2>; 37 #size-cells = <1>; 38 compatible = "fsl,ifc"; 39 interrupts = <16 2 0 0 20 2 0 0>; 40}; 41 42&soc { 43 #address-cells = <1>; 44 #size-cells = <1>; 45 device_type = "soc"; 46 compatible = "fsl,bsc9131-immr", "simple-bus"; 47 bus-frequency = <0>; // Filled out by uboot. 48 49 ecm-law@0 { 50 compatible = "fsl,ecm-law"; 51 reg = <0x0 0x1000>; 52 fsl,num-laws = <12>; 53 }; 54 55 ecm@1000 { 56 compatible = "fsl,bsc9131-ecm", "fsl,ecm"; 57 reg = <0x1000 0x1000>; 58 interrupts = <16 2 0 0>; 59 }; 60 61 memory-controller@2000 { 62 compatible = "fsl,bsc9131-memory-controller"; 63 reg = <0x2000 0x1000>; 64 interrupts = <16 2 0 0>; 65 }; 66 67/include/ "pq3-i2c-0.dtsi" 68 i2c@3000 { 69 interrupts = <17 2 0 0>; 70 }; 71 72/include/ "pq3-i2c-1.dtsi" 73 i2c@3100 { 74 interrupts = <17 2 0 0>; 75 }; 76 77/include/ "pq3-duart-0.dtsi" 78 serial0: serial@4500 { 79 interrupts = <18 2 0 0>; 80 }; 81 82 serial1: serial@4600 { 83 interrupts = <18 2 0 0 >; 84 }; 85/include/ "pq3-espi-0.dtsi" 86 spi0: spi@7000 { 87 fsl,espi-num-chipselects = <1>; 88 interrupts = <22 0x2 0 0>; 89 }; 90 91/include/ "pq3-gpio-0.dtsi" 92 gpio-controller@f000 { 93 interrupts = <19 0x2 0 0>; 94 }; 95 96 L2: l2-cache-controller@20000 { 97 compatible = "fsl,bsc9131-l2-cache-controller"; 98 reg = <0x20000 0x1000>; 99 cache-line-size = <32>; // 32 bytes 100 cache-size = <0x40000>; // L2,256K 101 interrupts = <16 2 0 0>; 102 }; 103 104/include/ "pq3-dma-0.dtsi" 105 106dma@21300 { 107 108 dma-channel@0 { 109 interrupts = <62 2 0 0>; 110 }; 111 112 dma-channel@80 { 113 interrupts = <63 2 0 0>; 114 }; 115 116 dma-channel@100 { 117 interrupts = <64 2 0 0>; 118 }; 119 120 dma-channel@180 { 121 interrupts = <65 2 0 0>; 122 }; 123}; 124 125/include/ "pq3-usb2-dr-0.dtsi" 126usb@22000 { 127 compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2"; 128 interrupts = <40 0x2 0 0>; 129}; 130 131/include/ "pq3-esdhc-0.dtsi" 132 sdhc@2e000 { 133 sdhci,auto-cmd12; 134 interrupts = <41 0x2 0 0>; 135 }; 136 137/include/ "pq3-sec4.4-0.dtsi" 138crypto@30000 { 139 interrupts = <57 2 0 0>; 140 141 sec_jr0: jr@1000 { 142 interrupts = <58 2 0 0>; 143 }; 144 145 sec_jr1: jr@2000 { 146 interrupts = <59 2 0 0>; 147 }; 148 149 sec_jr2: jr@3000 { 150 interrupts = <60 2 0 0>; 151 }; 152 153 sec_jr3: jr@4000 { 154 interrupts = <61 2 0 0>; 155 }; 156}; 157 158/include/ "pq3-mpic.dtsi" 159 160timer@41100 { 161 compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg"; 162 reg = <0x41400 0x200>; 163 interrupts = < 164 0xb0 2 165 0xb1 2 166 0xb2 2 167 0xb3 2>; 168}; 169 170/include/ "pq3-etsec2-0.dtsi" 171enet0: ethernet@b0000 { 172 queue-group@b0000 { 173 interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>; 174 }; 175}; 176 177/include/ "pq3-etsec2-1.dtsi" 178enet1: ethernet@b1000 { 179 queue-group@b1000 { 180 interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>; 181 }; 182}; 183 184global-utilities@e0000 { 185 compatible = "fsl,bsc9131-guts"; 186 reg = <0xe0000 0x1000>; 187 fsl,has-rstcr; 188 }; 189}; 190