1# SPDX-License-Identifier: GPL-2.0 2# Makefile for making ELF bootable images for booting on CHRP 3# using Open Firmware. 4# 5# Geert Uytterhoeven September 1997 6# 7# Based on coffboot by Paul Mackerras 8# Simplified for ppc64 by Todd Inglett 9# 10# NOTE: this code is built for 32 bit in ELF32 format even though 11# it packages a 64 bit kernel. We do this to simplify the 12# bootloader and increase compatibility with OpenFirmware. 13# 14# To this end we need to define BOOTCC, etc, as the tools 15# needed to build the 32 bit image. That's normally the same 16# compiler for the rest of the kernel, with the -m32 flag added. 17# To make it easier to setup a cross compiler, 18# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE 19# in the toplevel makefile. 20 21all: $(obj)/zImage 22 23compress-$(CONFIG_KERNEL_GZIP) := CONFIG_KERNEL_GZIP 24compress-$(CONFIG_KERNEL_XZ) := CONFIG_KERNEL_XZ 25 26ifdef CROSS32_COMPILE 27 BOOTCC := $(CROSS32_COMPILE)gcc 28 BOOTAR := $(CROSS32_COMPILE)ar 29else 30 BOOTCC := $(CC) 31 BOOTAR := $(AR) 32endif 33 34BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ 35 -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \ 36 -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ 37 -D$(compress-y) 38 39ifdef CONFIG_PPC64_BOOT_WRAPPER 40BOOTCFLAGS += -m64 41else 42BOOTCFLAGS += -m32 43endif 44 45BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) 46 47ifdef CONFIG_CPU_BIG_ENDIAN 48BOOTCFLAGS += -mbig-endian 49else 50BOOTCFLAGS += -mlittle-endian 51BOOTCFLAGS += $(call cc-option,-mabi=elfv2) 52endif 53 54BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc 55 56BOOTARFLAGS := -cr$(KBUILD_ARFLAGS) 57 58ifdef CONFIG_CC_IS_CLANG 59BOOTCFLAGS += $(CLANG_FLAGS) 60BOOTAFLAGS += $(CLANG_FLAGS) 61endif 62 63ifdef CONFIG_DEBUG_INFO 64BOOTCFLAGS += -g 65endif 66 67ifeq ($(call cc-option-yn, -fstack-protector),y) 68BOOTCFLAGS += -fno-stack-protector 69endif 70 71BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) 72 73DTC_FLAGS ?= -p 1024 74 75$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 76$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 77$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 78$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 79$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 80$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 81$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 82$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 83$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 84$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 85$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 86 87# The pre-boot decompressors pull in a lot of kernel headers and other source 88# files. This creates a bit of a dependency headache since we need to copy 89# these files into the build dir, fix up any includes and ensure that dependent 90# files are copied in the right order. 91 92# these need to be seperate variables because they are copied out of different 93# directories in the kernel tree. Sure you COULd merge them, but it's a 94# cure-is-worse-than-disease situation. 95zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c 96zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c 97zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h 98zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h 99 100$(addprefix $(obj)/, decompress.o): \ 101 $(addprefix $(obj)/,$(zlib-decomp-y)) 102 103$(addprefix $(obj)/, $(zlib-decomp-y)): \ 104 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 105 $(addprefix $(obj)/,$(zlibheader-y)) \ 106 $(addprefix $(obj)/,$(zlib-y)) 107 108$(addprefix $(obj)/,$(zlib-y)): \ 109 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 110 $(addprefix $(obj)/,$(zlibheader-y)) 111 112libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c 113libfdtheader := fdt.h libfdt.h libfdt_internal.h 114 115$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \ 116 treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \ 117 $(addprefix $(obj)/,$(libfdtheader)) 118 119src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ 120 $(libfdt) libfdt-wrapper.c \ 121 ns16550.c serial.c simple_alloc.c div64.S util.S \ 122 elf_util.c $(zlib-y) devtree.c stdlib.c \ 123 oflib.c ofconsole.c cuboot.c 124 125src-wlib-$(CONFIG_PPC_MPC52XX) += mpc52xx-psc.c 126src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S opal.c 127ifndef CONFIG_PPC64_BOOT_WRAPPER 128src-wlib-y += crtsavres.S 129endif 130src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c 131src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c 132src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c 133src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c 134src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c 135src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c 136src-wlib-$(CONFIG_CPM) += cpm-serial.c 137 138src-plat-y := of.c epapr.c 139src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \ 140 treeboot-walnut.c cuboot-acadia.c \ 141 cuboot-kilauea.c simpleboot.c \ 142 virtex405-head.S virtex.c 143src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ 144 cuboot-bamboo.c cuboot-sam440ep.c \ 145 cuboot-sequoia.c cuboot-rainier.c \ 146 cuboot-taishan.c cuboot-katmai.c \ 147 cuboot-warp.c cuboot-yosemite.c \ 148 treeboot-iss4xx.c treeboot-currituck.c \ 149 treeboot-akebono.c \ 150 simpleboot.c fixed-head.S virtex.c 151src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c 152src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c 153src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c 154src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c 155src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c 156src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ 157 gamecube-head.S gamecube.c \ 158 wii-head.S wii.c holly.c \ 159 fixed-head.S mvme5100.c 160src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c 161src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c 162src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c 163src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S 164src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S 165src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S 166src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c 167 168src-wlib := $(sort $(src-wlib-y)) 169src-plat := $(sort $(src-plat-y)) 170src-boot := $(src-wlib) $(src-plat) empty.c 171 172src-boot := $(addprefix $(obj)/, $(src-boot)) 173obj-boot := $(addsuffix .o, $(basename $(src-boot))) 174obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) 175obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) 176obj-plat: $(libfdt) 177 178quiet_cmd_copy_kern_src = COPY $@ 179 cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ 180 181$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 182 $(call cmd,copy_kern_src) 183 184$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 185 $(call cmd,copy_kern_src) 186 187$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% 188 $(call cmd,copy_kern_src) 189 190$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% 191 $(call cmd,copy_kern_src) 192 193quiet_cmd_copy_libfdt = COPY $@ 194 cmd_copy_libfdt = cp $< $@ 195 196$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% 197 $(call cmd,copy_libfdt) 198 199$(obj)/empty.c: 200 $(Q)touch $@ 201 202$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S 203 $(Q)cp $< $@ 204 205$(srctree)/$(src)/serial.c: $(obj)/autoconf.h 206 207$(obj)/autoconf.h: $(obj)/%: $(objtree)/include/generated/% 208 $(Q)cp $< $@ 209 210clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ 211 $(zlib-decomp-) $(libfdt) $(libfdtheader) \ 212 autoconf.h empty.c zImage.coff.lds zImage.ps3.lds zImage.lds 213 214quiet_cmd_bootcc = BOOTCC $@ 215 cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< 216 217quiet_cmd_bootas = BOOTAS $@ 218 cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< 219 220quiet_cmd_bootar = BOOTAR $@ 221 cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@ 222 223$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE 224 $(call if_changed_dep,bootcc) 225$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE 226 $(Q)mkdir -p $(dir $@) 227 $(call if_changed_dep,bootcc) 228$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE 229 $(Q)mkdir -p $(dir $@) 230 $(call if_changed_dep,bootas) 231 232$(obj)/wrapper.a: $(obj-wlib) FORCE 233 $(call if_changed,bootar) 234 235hostprogs-y := addnote hack-coff mktree 236 237targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) 238extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ 239 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds 240 241dtstree := $(srctree)/$(src)/dts 242 243wrapper :=$(srctree)/$(src)/wrapper 244wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ 245 $(wrapper) FORCE 246 247############# 248# Bits for building various flavours of zImage 249 250ifneq ($(CROSS32_COMPILE),) 251CROSSWRAP := -C "$(CROSS32_COMPILE)" 252else 253ifneq ($(CROSS_COMPILE),) 254CROSSWRAP := -C "$(CROSS_COMPILE)" 255endif 256endif 257 258compressor-$(CONFIG_KERNEL_GZIP) := gz 259compressor-$(CONFIG_KERNEL_XZ) := xz 260 261# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd 262quiet_cmd_wrap = WRAP $@ 263 cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ 264 $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ 265 vmlinux 266 267image-$(CONFIG_PPC_PSERIES) += zImage.pseries 268image-$(CONFIG_PPC_POWERNV) += zImage.pseries 269image-$(CONFIG_PPC_MAPLE) += zImage.maple 270image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries 271image-$(CONFIG_PPC_PS3) += dtbImage.ps3 272image-$(CONFIG_PPC_CHRP) += zImage.chrp 273image-$(CONFIG_PPC_EFIKA) += zImage.chrp 274image-$(CONFIG_PPC_PMAC) += zImage.pmac 275image-$(CONFIG_PPC_HOLLY) += dtbImage.holly 276image-$(CONFIG_DEFAULT_UIMAGE) += uImage 277image-$(CONFIG_EPAPR_BOOT) += zImage.epapr 278 279# 280# Targets which embed a device tree blob 281# 282# Theses are default targets to build images which embed device tree blobs. 283# They are only required on boards which do not have FDT support in firmware. 284# Boards with newish u-boot firmware can use the uImage target above 285# 286 287# Board ports in arch/powerpc/platform/40x/Kconfig 288image-$(CONFIG_EP405) += dtbImage.ep405 289image-$(CONFIG_HOTFOOT) += cuImage.hotfoot 290image-$(CONFIG_WALNUT) += treeImage.walnut 291image-$(CONFIG_ACADIA) += cuImage.acadia 292image-$(CONFIG_OBS600) += uImage.obs600 293 294# Board ports in arch/powerpc/platform/44x/Kconfig 295image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony 296image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo 297image-$(CONFIG_SAM440EP) += cuImage.sam440ep 298image-$(CONFIG_SEQUOIA) += cuImage.sequoia 299image-$(CONFIG_RAINIER) += cuImage.rainier 300image-$(CONFIG_TAISHAN) += cuImage.taishan 301image-$(CONFIG_KATMAI) += cuImage.katmai 302image-$(CONFIG_WARP) += cuImage.warp 303image-$(CONFIG_YOSEMITE) += cuImage.yosemite 304image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ 305 treeImage.iss4xx-mpic 306image-$(CONFIG_CURRITUCK) += treeImage.currituck 307image-$(CONFIG_AKEBONO) += treeImage.akebono 308 309# Board ports in arch/powerpc/platform/8xx/Kconfig 310image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads 311image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads 312image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc 313image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ 314 dtbImage.adder875-redboot 315 316# Board ports in arch/powerpc/platform/52xx/Kconfig 317image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 318image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b 319image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 320 321# Board ports in arch/powerpc/platform/82xx/Kconfig 322image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads 323image-$(CONFIG_PQ2FADS) += cuImage.pq2fads 324image-$(CONFIG_EP8248E) += dtbImage.ep8248e 325 326# Board ports in arch/powerpc/platform/83xx/Kconfig 327image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds 328image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb 329image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ 330 cuImage.mpc8349emitxgp 331image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds 332image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds 333image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot 334 335# Board ports in arch/powerpc/platform/85xx/Kconfig 336image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads 337image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads 338image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ 339 cuImage.mpc8548cds_32b \ 340 cuImage.mpc8555cds 341image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds 342image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ 343 cuImage.mpc8572ds 344image-$(CONFIG_TQM8540) += cuImage.tqm8540 345image-$(CONFIG_TQM8541) += cuImage.tqm8541 346image-$(CONFIG_TQM8548) += cuImage.tqm8548 347image-$(CONFIG_TQM8555) += cuImage.tqm8555 348image-$(CONFIG_TQM8560) += cuImage.tqm8560 349image-$(CONFIG_SBC8548) += cuImage.sbc8548 350image-$(CONFIG_KSI8560) += cuImage.ksi8560 351 352# Board ports in arch/powerpc/platform/86xx/Kconfig 353image-$(CONFIG_MVME7100) += dtbImage.mvme7100 354 355# Board ports in arch/powerpc/platform/embedded6xx/Kconfig 356image-$(CONFIG_STORCENTER) += cuImage.storcenter 357image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 358image-$(CONFIG_GAMECUBE) += dtbImage.gamecube 359image-$(CONFIG_WII) += dtbImage.wii 360image-$(CONFIG_MVME5100) += dtbImage.mvme5100 361 362# Board port in arch/powerpc/platform/amigaone/Kconfig 363image-$(CONFIG_AMIGAONE) += cuImage.amigaone 364 365# For 32-bit powermacs, build the COFF and miboot images 366# as well as the ELF images. 367ifdef CONFIG_PPC32 368image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot 369endif 370 371# Allow extra targets to be added to the defconfig 372image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS)) 373 374initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) 375initrd-y := $(patsubst zImage%, zImage.initrd%, \ 376 $(patsubst dtbImage%, dtbImage.initrd%, \ 377 $(patsubst simpleImage%, simpleImage.initrd%, \ 378 $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) 379initrd-y := $(filter-out $(image-y), $(initrd-y)) 380targets += $(image-y) $(initrd-y) 381 382$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz 383 384# Don't put the ramdisk on the pattern rule; when its missing make will try 385# the pattern rule with less dependencies that also matches (even with the 386# hard dependency listed). 387$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE 388 $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) 389 390$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE 391 $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) 392 393# dtbImage% - a dtbImage is a zImage with an embedded device tree blob 394$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 395 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 396 397$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 398 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb) 399 400# This cannot be in the root of $(src) as the zImage rule always adds a $(obj) 401# prefix 402$(obj)/vmlinux.strip: vmlinux 403 $(STRIP) -s -R .comment $< -o $@ 404 405$(obj)/uImage: vmlinux $(wrapperbits) FORCE 406 $(call if_changed,wrap,uboot) 407 408$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 409 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 410 411$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 412 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) 413 414$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 415 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 416 417$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 418 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb) 419 420$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 421 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 422 423$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 424 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb) 425 426$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 427 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 428 429$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 430 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb) 431 432# Needed for the above targets to work with dts/fsl/ files 433$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb 434 @cp $< $@ 435 436# If there isn't a platform selected then just strip the vmlinux. 437ifeq (,$(image-y)) 438image-y := vmlinux.strip 439endif 440 441$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) 442 $(Q)rm -f $@; ln $< $@ 443$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) 444 $(Q)rm -f $@; ln $< $@ 445 446# Only install the vmlinux 447install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) 448 sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" 449 450# Install the vmlinux and other built boot targets. 451zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) 452 sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^ 453 454# anything not in $(targets) 455clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ 456 zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ 457 zImage.miboot zImage.pmac zImage.pseries \ 458 zImage.maple simpleImage.* otheros.bld 459 460# clean up files cached by wrapper 461clean-kernel-base := vmlinux.strip vmlinux.bin 462clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) 463clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) 464# If not absolute clean-files are relative to $(obj). 465clean-files += $(addprefix $(objtree)/, $(clean-kernel)) 466 467WRAPPER_OBJDIR := /usr/lib/kernel-wrapper 468WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts 469WRAPPER_BINDIR := /usr/sbin 470INSTALL := install 471 472extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) 473hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y)) 474wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper 475dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) 476 477all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) 478 479quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) 480 cmd_mkdir = mkdir -p $@ 481 482quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) 483 cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ 484 485quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) 486 cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ 487 488quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 489 cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ 490 491quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 492 cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ 493 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ 494 -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ 495 496 497$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): 498 $(call cmd,mkdir) 499 500$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) 501 $(call cmd,install) 502 503$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) 504 $(call cmd,install_exe) 505 506$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) 507 $(call cmd,install_dts) 508 509$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) 510 $(call cmd,install_wrapper) 511 512$(obj)/bootwrapper_install: $(all-installed) 513