1# SPDX-License-Identifier: GPL-2.0 2# Makefile for making ELF bootable images for booting on CHRP 3# using Open Firmware. 4# 5# Geert Uytterhoeven September 1997 6# 7# Based on coffboot by Paul Mackerras 8# Simplified for ppc64 by Todd Inglett 9# 10# NOTE: this code may be built for 32 bit in ELF32 format even though 11# it packages a 64 bit kernel. We do this to simplify the 12# bootloader and increase compatibility with OpenFirmware. 13# 14# To this end we need to define BOOTCC, etc, as the tools 15# needed to build the 32 bit image. That's normally the same 16# compiler for the rest of the kernel, with the -m32 flag added. 17# To make it easier to setup a cross compiler, 18# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE 19# in the toplevel makefile. 20 21all: $(obj)/zImage 22 23ifdef CROSS32_COMPILE 24ifdef CONFIG_CC_IS_CLANG 25 BOOTCC := $(CROSS32_COMPILE)clang 26else 27 BOOTCC := $(CROSS32_COMPILE)gcc 28endif 29 BOOTAR := $(CROSS32_COMPILE)ar 30else 31 BOOTCC := $(CC) 32 BOOTAR := $(AR) 33endif 34 35ifdef CONFIG_PPC64_BOOT_WRAPPER 36BOOTTARGETFLAGS += -m64 37BOOTTARGETFLAGS += -mabi=elfv2 38ifdef CONFIG_PPC64_ELF_ABI_V2 39BOOTTARGETFLAGS += $(call cc-option,-mabi=elfv2) 40endif 41else 42BOOTTARGETFLAGS := -m32 43endif 44 45ifdef CONFIG_TARGET_CPU_BOOL 46BOOTTARGETFLAGS += -mcpu=$(CONFIG_TARGET_CPU) 47else ifdef CONFIG_PPC64_BOOT_WRAPPER 48ifdef CONFIG_CPU_LITTLE_ENDIAN 49BOOTTARGETFLAGS += -mcpu=powerpc64le 50else 51BOOTTARGETFLAGS += -mcpu=powerpc64 52endif 53endif 54 55$(obj)/4xx.o: BOOTTARGETFLAGS += -mcpu=405 56$(obj)/ebony.o: BOOTTARGETFLAGS += -mcpu=440 57$(obj)/cuboot-taishan.o: BOOTTARGETFLAGS += -mcpu=440 58$(obj)/cuboot-katmai.o: BOOTTARGETFLAGS += -mcpu=440 59$(obj)/treeboot-iss4xx.o: BOOTTARGETFLAGS += -mcpu=405 60$(obj)/treeboot-currituck.o: BOOTTARGETFLAGS += -mcpu=405 61$(obj)/treeboot-akebono.o: BOOTTARGETFLAGS += -mcpu=405 62 63ifdef CONFIG_CPU_BIG_ENDIAN 64BOOTTARGETFLAGS += -mbig-endian 65else 66BOOTTARGETFLAGS += -mlittle-endian 67endif 68 69BOOTCPPFLAGS := -nostdinc $(LINUXINCLUDE) 70BOOTCPPFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) 71 72BOOTCFLAGS := $(BOOTTARGETFLAGS) \ 73 -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ 74 -fno-strict-aliasing -O2 \ 75 -msoft-float -mno-altivec -mno-vsx \ 76 $(call cc-option,-mno-prefixed) \ 77 $(call cc-option,-mno-pcrel) \ 78 $(call cc-option,-mno-mma) \ 79 $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \ 80 -fomit-frame-pointer -fno-builtin -fPIC 81 82BOOTAFLAGS := $(BOOTTARGETFLAGS) -D__ASSEMBLY__ 83 84BOOTARFLAGS := -crD 85 86ifdef CONFIG_CC_IS_CLANG 87BOOTCFLAGS += $(CLANG_FLAGS) 88BOOTAFLAGS += $(CLANG_FLAGS) 89endif 90 91ifdef CONFIG_DEBUG_INFO 92BOOTCFLAGS += -g 93endif 94 95ifeq ($(call cc-option-yn, -fstack-protector),y) 96BOOTCFLAGS += -fno-stack-protector 97endif 98 99BOOTCFLAGS += -include $(srctree)/include/linux/compiler_attributes.h 100BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) 101 102DTC_FLAGS ?= -p 1024 103 104# The pre-boot decompressors pull in a lot of kernel headers and other source 105# files. This creates a bit of a dependency headache since we need to copy 106# these files into the build dir, fix up any includes and ensure that dependent 107# files are copied in the right order. 108 109# these need to be separate variables because they are copied out of different 110# directories in the kernel tree. Sure you COULD merge them, but it's a 111# cure-is-worse-than-disease situation. 112zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c 113zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c 114zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h 115zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h 116 117$(addprefix $(obj)/, decompress.o): \ 118 $(addprefix $(obj)/,$(zlib-decomp-y)) 119 120$(addprefix $(obj)/, $(zlib-decomp-y)): \ 121 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 122 $(addprefix $(obj)/,$(zlibheader-y)) \ 123 $(addprefix $(obj)/,$(zlib-y)) 124 125$(addprefix $(obj)/,$(zlib-y)): \ 126 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 127 $(addprefix $(obj)/,$(zlibheader-y)) 128 129libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c 130libfdtheader := fdt.h libfdt.h libfdt_internal.h 131 132$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \ 133 treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \ 134 $(addprefix $(obj)/,$(libfdtheader)) 135 136src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ 137 $(libfdt) libfdt-wrapper.c \ 138 ns16550.c serial.c simple_alloc.c div64.S util.S \ 139 elf_util.c $(zlib-y) devtree.c stdlib.c \ 140 oflib.c ofconsole.c cuboot.c 141 142src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c 143src-wlib-$(CONFIG_PPC_POWERNV) += opal-calls.S opal.c 144ifndef CONFIG_PPC64_BOOT_WRAPPER 145src-wlib-y += crtsavres.S 146endif 147src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c 148src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c 149src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c 150src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c 151src-wlib-$(CONFIG_CPM) += cpm-serial.c 152 153src-plat-y := of.c epapr.c 154src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ 155 cuboot-bamboo.c cuboot-sam440ep.c \ 156 cuboot-sequoia.c cuboot-rainier.c \ 157 cuboot-taishan.c cuboot-katmai.c \ 158 cuboot-warp.c cuboot-yosemite.c \ 159 treeboot-iss4xx.c treeboot-currituck.c \ 160 treeboot-akebono.c \ 161 simpleboot.c fixed-head.S 162src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c 163src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c 164src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c 165src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c 166src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c 167src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c \ 168 gamecube-head.S gamecube.c \ 169 wii-head.S wii.c holly.c \ 170 fixed-head.S mvme5100.c 171src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c 172src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c 173src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c 174src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S 175src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S 176src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S 177src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c 178 179src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c 180 181src-wlib := $(sort $(src-wlib-y)) 182src-plat := $(sort $(src-plat-y)) 183src-boot := $(src-wlib) $(src-plat) empty.c 184 185src-boot := $(addprefix $(obj)/, $(src-boot)) 186obj-boot := $(addsuffix .o, $(basename $(src-boot))) 187obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) 188obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) 189obj-plat: $(libfdt) 190 191quiet_cmd_copy_kern_src = COPY $@ 192 cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ 193 194$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 195 $(call cmd,copy_kern_src) 196 197$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 198 $(call cmd,copy_kern_src) 199 200$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% 201 $(call cmd,copy_kern_src) 202 203$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% 204 $(call cmd,copy_kern_src) 205 206quiet_cmd_copy_libfdt = COPY $@ 207 cmd_copy_libfdt = cp $< $@ 208 209$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% 210 $(call cmd,copy_libfdt) 211 212$(obj)/empty.c: 213 $(Q)touch $@ 214 215$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(src)/%.S 216 $(Q)cp $< $@ 217 218clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ 219 $(zlib-decomp-) $(libfdt) $(libfdtheader) \ 220 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds 221 222quiet_cmd_bootcc = BOOTCC $@ 223 cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTCFLAGS) -c -o $@ $< 224 225quiet_cmd_bootas = BOOTAS $@ 226 cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTAFLAGS) -c -o $@ $< 227 228quiet_cmd_bootar = BOOTAR $@ 229 cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@ 230 231$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE 232 $(call if_changed_dep,bootcc) 233$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE 234 $(Q)mkdir -p $(dir $@) 235 $(call if_changed_dep,bootcc) 236$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE 237 $(Q)mkdir -p $(dir $@) 238 $(call if_changed_dep,bootas) 239 240$(obj)/wrapper.a: $(obj-wlib) FORCE 241 $(call if_changed,bootar) 242 243hostprogs := addnote hack-coff mktree 244 245targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds 246extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ 247 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds 248 249dtstree := $(src)/dts 250 251wrapper := $(src)/wrapper 252wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ 253 $(wrapper) FORCE 254 255############# 256# Bits for building various flavours of zImage 257 258ifneq ($(CROSS32_COMPILE),) 259CROSSWRAP := -C "$(CROSS32_COMPILE)" 260else 261ifneq ($(CROSS_COMPILE),) 262CROSSWRAP := -C "$(CROSS_COMPILE)" 263endif 264endif 265 266compressor-$(CONFIG_KERNEL_GZIP) := gz 267compressor-$(CONFIG_KERNEL_XZ) := xz 268compressor-$(CONFIG_KERNEL_LZMA) := lzma 269compressor-$(CONFIG_KERNEL_LZO) := lzo 270 271# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd 272quiet_cmd_wrap = WRAP $@ 273 cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ 274 $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ 275 vmlinux 276 277image-$(CONFIG_PPC_PSERIES) += zImage.pseries 278image-$(CONFIG_PPC_POWERNV) += zImage.pseries 279image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries 280image-$(CONFIG_PPC_PS3) += dtbImage.ps3 281image-$(CONFIG_PPC_CHRP) += zImage.chrp 282image-$(CONFIG_PPC_EFIKA) += zImage.chrp 283image-$(CONFIG_PPC_PMAC) += zImage.pmac 284image-$(CONFIG_PPC_HOLLY) += dtbImage.holly 285image-$(CONFIG_DEFAULT_UIMAGE) += uImage 286image-$(CONFIG_EPAPR_BOOT) += zImage.epapr 287 288# 289# Targets which embed a device tree blob 290# 291# Theses are default targets to build images which embed device tree blobs. 292# They are only required on boards which do not have FDT support in firmware. 293# Boards with newish u-boot firmware can use the uImage target above 294# 295 296# Board ports in arch/powerpc/platform/44x/Kconfig 297image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony 298image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo 299image-$(CONFIG_SAM440EP) += cuImage.sam440ep 300image-$(CONFIG_SEQUOIA) += cuImage.sequoia 301image-$(CONFIG_RAINIER) += cuImage.rainier 302image-$(CONFIG_TAISHAN) += cuImage.taishan 303image-$(CONFIG_KATMAI) += cuImage.katmai 304image-$(CONFIG_WARP) += cuImage.warp 305image-$(CONFIG_YOSEMITE) += cuImage.yosemite 306image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ 307 treeImage.iss4xx-mpic 308image-$(CONFIG_CURRITUCK) += treeImage.currituck 309image-$(CONFIG_AKEBONO) += treeImage.akebono 310 311# Board ports in arch/powerpc/platform/8xx/Kconfig 312image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads 313image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads 314image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc 315image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ 316 dtbImage.adder875-redboot 317 318# Board ports in arch/powerpc/platform/52xx/Kconfig 319image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 320image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b 321image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 322 323# Board ports in arch/powerpc/platform/82xx/Kconfig 324image-$(CONFIG_EP8248E) += dtbImage.ep8248e 325 326# Board ports in arch/powerpc/platform/83xx/Kconfig 327image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb 328image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ 329 cuImage.mpc8349emitxgp 330image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot 331 332# Board ports in arch/powerpc/platform/85xx/Kconfig 333image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds 334image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ 335 cuImage.mpc8572ds 336image-$(CONFIG_TQM8540) += cuImage.tqm8540 337image-$(CONFIG_TQM8541) += cuImage.tqm8541 338image-$(CONFIG_TQM8548) += cuImage.tqm8548 339image-$(CONFIG_TQM8555) += cuImage.tqm8555 340image-$(CONFIG_TQM8560) += cuImage.tqm8560 341image-$(CONFIG_KSI8560) += cuImage.ksi8560 342 343# Board ports in arch/powerpc/platform/86xx/Kconfig 344image-$(CONFIG_MVME7100) += dtbImage.mvme7100 345 346# Board ports in arch/powerpc/platform/embedded6xx/Kconfig 347image-$(CONFIG_STORCENTER) += cuImage.storcenter 348image-$(CONFIG_GAMECUBE) += dtbImage.gamecube 349image-$(CONFIG_WII) += dtbImage.wii 350image-$(CONFIG_MVME5100) += dtbImage.mvme5100 351 352# Board port in arch/powerpc/platform/amigaone/Kconfig 353image-$(CONFIG_AMIGAONE) += cuImage.amigaone 354 355image-$(CONFIG_PPC_MICROWATT) += dtbImage.microwatt 356 357# For 32-bit powermacs, build the COFF and miboot images 358# as well as the ELF images. 359ifdef CONFIG_PPC32 360image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot 361endif 362 363# Allow extra targets to be added to the defconfig 364image-y += $(CONFIG_EXTRA_TARGETS) 365 366initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) 367initrd-y := $(patsubst zImage%, zImage.initrd%, \ 368 $(patsubst dtbImage%, dtbImage.initrd%, \ 369 $(patsubst simpleImage%, simpleImage.initrd%, \ 370 $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) 371initrd-y := $(filter-out $(image-y), $(initrd-y)) 372targets += $(image-y) $(initrd-y) 373targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ 374 $(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y)))) 375targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ 376 $(patsubst $(x).%, dts/fsl/%.dtb, $(filter $(x).%, $(image-y)))) 377 378$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz 379 380# Don't put the ramdisk on the pattern rule; when its missing make will try 381# the pattern rule with less dependencies that also matches (even with the 382# hard dependency listed). 383$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE 384 $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) 385 386$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE 387 $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) 388 389# dtbImage% - a dtbImage is a zImage with an embedded device tree blob 390$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 391 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 392 393$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 394 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb) 395 396# This cannot be in the root of $(src) as the zImage rule always adds a $(obj) 397# prefix 398$(obj)/vmlinux.strip: vmlinux 399 $(STRIP) -s -R .comment $< -o $@ 400 401$(obj)/uImage: vmlinux $(wrapperbits) FORCE 402 $(call if_changed,wrap,uboot) 403 404$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 405 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 406 407$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 408 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) 409 410$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 411 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 412 413$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 414 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb) 415 416$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 417 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 418 419$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 420 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb) 421 422$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 423 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 424 425$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 426 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb) 427 428# Needed for the above targets to work with dts/fsl/ files 429$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb 430 @cp $< $@ 431 432# If there isn't a platform selected then just strip the vmlinux. 433ifeq (,$(image-y)) 434image-y := vmlinux.strip 435endif 436 437$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) 438 $(Q)rm -f $@; ln $< $@ 439$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) 440 $(Q)rm -f $@; ln $< $@ 441 442# anything not in $(targets) 443clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ 444 zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ 445 zImage.miboot zImage.pmac zImage.pseries \ 446 simpleImage.* otheros.bld 447 448# clean up files cached by wrapper 449clean-kernel-base := vmlinux.strip vmlinux.bin 450clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) 451clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) 452# clean-files are relative to $(obj). 453clean-files += $(addprefix ../../../, $(clean-kernel)) 454 455WRAPPER_OBJDIR := /usr/lib/kernel-wrapper 456WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts 457WRAPPER_BINDIR := /usr/sbin 458INSTALL := install 459 460extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) 461hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs)) 462wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper 463dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) 464 465all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) 466 467quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) 468 cmd_mkdir = mkdir -p $@ 469 470quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) 471 cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ 472 473quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) 474 cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ 475 476quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 477 cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ 478 479quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 480 cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ 481 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ 482 -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ 483 484 485$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): 486 $(call cmd,mkdir) 487 488$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) 489 $(call cmd,install) 490 491$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) 492 $(call cmd,install_exe) 493 494$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) 495 $(call cmd,install_dts) 496 497$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) 498 $(call cmd,install_wrapper) 499 500$(obj)/bootwrapper_install: $(all-installed) 501