1# SPDX-License-Identifier: GPL-2.0 2# Makefile for making ELF bootable images for booting on CHRP 3# using Open Firmware. 4# 5# Geert Uytterhoeven September 1997 6# 7# Based on coffboot by Paul Mackerras 8# Simplified for ppc64 by Todd Inglett 9# 10# NOTE: this code may be built for 32 bit in ELF32 format even though 11# it packages a 64 bit kernel. We do this to simplify the 12# bootloader and increase compatibility with OpenFirmware. 13# 14# To this end we need to define BOOTCC, etc, as the tools 15# needed to build the 32 bit image. That's normally the same 16# compiler for the rest of the kernel, with the -m32 flag added. 17# To make it easier to setup a cross compiler, 18# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE 19# in the toplevel makefile. 20 21all: $(obj)/zImage 22 23ifdef CROSS32_COMPILE 24ifdef CONFIG_CC_IS_CLANG 25 BOOTCC := $(CROSS32_COMPILE)clang 26else 27 BOOTCC := $(CROSS32_COMPILE)gcc 28endif 29 BOOTAR := $(CROSS32_COMPILE)ar 30else 31 BOOTCC := $(CC) 32 BOOTAR := $(AR) 33endif 34 35ifdef CONFIG_PPC64_BOOT_WRAPPER 36BOOTTARGETFLAGS += -m64 37BOOTTARGETFLAGS += -mabi=elfv2 38ifdef CONFIG_PPC64_ELF_ABI_V2 39BOOTTARGETFLAGS += $(call cc-option,-mabi=elfv2) 40endif 41else 42BOOTTARGETFLAGS := -m32 43endif 44 45ifdef CONFIG_TARGET_CPU_BOOL 46BOOTTARGETFLAGS += -mcpu=$(CONFIG_TARGET_CPU) 47else ifdef CONFIG_PPC64_BOOT_WRAPPER 48ifdef CONFIG_CPU_LITTLE_ENDIAN 49BOOTTARGETFLAGS += -mcpu=powerpc64le 50else 51BOOTTARGETFLAGS += -mcpu=powerpc64 52endif 53endif 54 55$(obj)/4xx.o: BOOTTARGETFLAGS += -mcpu=405 56$(obj)/ebony.o: BOOTTARGETFLAGS += -mcpu=440 57$(obj)/cuboot-hotfoot.o: BOOTTARGETFLAGS += -mcpu=405 58$(obj)/cuboot-taishan.o: BOOTTARGETFLAGS += -mcpu=440 59$(obj)/cuboot-katmai.o: BOOTTARGETFLAGS += -mcpu=440 60$(obj)/cuboot-acadia.o: BOOTTARGETFLAGS += -mcpu=405 61$(obj)/treeboot-iss4xx.o: BOOTTARGETFLAGS += -mcpu=405 62$(obj)/treeboot-currituck.o: BOOTTARGETFLAGS += -mcpu=405 63$(obj)/treeboot-akebono.o: BOOTTARGETFLAGS += -mcpu=405 64 65ifdef CONFIG_CPU_BIG_ENDIAN 66BOOTTARGETFLAGS += -mbig-endian 67else 68BOOTTARGETFLAGS += -mlittle-endian 69endif 70 71BOOTCPPFLAGS := -nostdinc $(LINUXINCLUDE) 72BOOTCPPFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) 73 74BOOTCFLAGS := $(BOOTTARGETFLAGS) \ 75 -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ 76 -fno-strict-aliasing -O2 \ 77 -msoft-float -mno-altivec -mno-vsx \ 78 $(call cc-option,-mno-prefixed) \ 79 $(call cc-option,-mno-pcrel) \ 80 $(call cc-option,-mno-mma) \ 81 $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \ 82 -fomit-frame-pointer -fno-builtin -fPIC 83 84BOOTAFLAGS := $(BOOTTARGETFLAGS) -D__ASSEMBLY__ 85 86BOOTARFLAGS := -crD 87 88ifdef CONFIG_CC_IS_CLANG 89BOOTCFLAGS += $(CLANG_FLAGS) 90BOOTAFLAGS += $(CLANG_FLAGS) 91endif 92 93ifdef CONFIG_DEBUG_INFO 94BOOTCFLAGS += -g 95endif 96 97ifeq ($(call cc-option-yn, -fstack-protector),y) 98BOOTCFLAGS += -fno-stack-protector 99endif 100 101BOOTCFLAGS += -include $(srctree)/include/linux/compiler_attributes.h 102BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) 103 104DTC_FLAGS ?= -p 1024 105 106# The pre-boot decompressors pull in a lot of kernel headers and other source 107# files. This creates a bit of a dependency headache since we need to copy 108# these files into the build dir, fix up any includes and ensure that dependent 109# files are copied in the right order. 110 111# these need to be separate variables because they are copied out of different 112# directories in the kernel tree. Sure you COULD merge them, but it's a 113# cure-is-worse-than-disease situation. 114zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c 115zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c 116zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h 117zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h 118 119$(addprefix $(obj)/, decompress.o): \ 120 $(addprefix $(obj)/,$(zlib-decomp-y)) 121 122$(addprefix $(obj)/, $(zlib-decomp-y)): \ 123 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 124 $(addprefix $(obj)/,$(zlibheader-y)) \ 125 $(addprefix $(obj)/,$(zlib-y)) 126 127$(addprefix $(obj)/,$(zlib-y)): \ 128 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 129 $(addprefix $(obj)/,$(zlibheader-y)) 130 131libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c 132libfdtheader := fdt.h libfdt.h libfdt_internal.h 133 134$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \ 135 treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \ 136 $(addprefix $(obj)/,$(libfdtheader)) 137 138src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ 139 $(libfdt) libfdt-wrapper.c \ 140 ns16550.c serial.c simple_alloc.c div64.S util.S \ 141 elf_util.c $(zlib-y) devtree.c stdlib.c \ 142 oflib.c ofconsole.c cuboot.c 143 144src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c 145src-wlib-$(CONFIG_PPC_POWERNV) += opal-calls.S opal.c 146ifndef CONFIG_PPC64_BOOT_WRAPPER 147src-wlib-y += crtsavres.S 148endif 149src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c 150src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c 151src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c 152src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c 153src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c 154src-wlib-$(CONFIG_CPM) += cpm-serial.c 155 156src-plat-y := of.c epapr.c 157src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \ 158 cuboot-acadia.c \ 159 cuboot-kilauea.c simpleboot.c 160src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ 161 cuboot-bamboo.c cuboot-sam440ep.c \ 162 cuboot-sequoia.c cuboot-rainier.c \ 163 cuboot-taishan.c cuboot-katmai.c \ 164 cuboot-warp.c cuboot-yosemite.c \ 165 treeboot-iss4xx.c treeboot-currituck.c \ 166 treeboot-akebono.c \ 167 simpleboot.c fixed-head.S 168src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c 169src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c 170src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c 171src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c 172src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c 173src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c \ 174 gamecube-head.S gamecube.c \ 175 wii-head.S wii.c holly.c \ 176 fixed-head.S mvme5100.c 177src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c 178src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c 179src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c 180src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S 181src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S 182src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S 183src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c 184 185src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c 186 187src-wlib := $(sort $(src-wlib-y)) 188src-plat := $(sort $(src-plat-y)) 189src-boot := $(src-wlib) $(src-plat) empty.c 190 191src-boot := $(addprefix $(obj)/, $(src-boot)) 192obj-boot := $(addsuffix .o, $(basename $(src-boot))) 193obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) 194obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) 195obj-plat: $(libfdt) 196 197quiet_cmd_copy_kern_src = COPY $@ 198 cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ 199 200$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 201 $(call cmd,copy_kern_src) 202 203$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 204 $(call cmd,copy_kern_src) 205 206$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% 207 $(call cmd,copy_kern_src) 208 209$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% 210 $(call cmd,copy_kern_src) 211 212quiet_cmd_copy_libfdt = COPY $@ 213 cmd_copy_libfdt = cp $< $@ 214 215$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% 216 $(call cmd,copy_libfdt) 217 218$(obj)/empty.c: 219 $(Q)touch $@ 220 221$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(src)/%.S 222 $(Q)cp $< $@ 223 224clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ 225 $(zlib-decomp-) $(libfdt) $(libfdtheader) \ 226 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds 227 228quiet_cmd_bootcc = BOOTCC $@ 229 cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTCFLAGS) -c -o $@ $< 230 231quiet_cmd_bootas = BOOTAS $@ 232 cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTAFLAGS) -c -o $@ $< 233 234quiet_cmd_bootar = BOOTAR $@ 235 cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@ 236 237$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE 238 $(call if_changed_dep,bootcc) 239$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE 240 $(Q)mkdir -p $(dir $@) 241 $(call if_changed_dep,bootcc) 242$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE 243 $(Q)mkdir -p $(dir $@) 244 $(call if_changed_dep,bootas) 245 246$(obj)/wrapper.a: $(obj-wlib) FORCE 247 $(call if_changed,bootar) 248 249hostprogs := addnote hack-coff mktree 250 251targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds 252extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ 253 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds 254 255dtstree := $(src)/dts 256 257wrapper := $(src)/wrapper 258wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ 259 $(wrapper) FORCE 260 261############# 262# Bits for building various flavours of zImage 263 264ifneq ($(CROSS32_COMPILE),) 265CROSSWRAP := -C "$(CROSS32_COMPILE)" 266else 267ifneq ($(CROSS_COMPILE),) 268CROSSWRAP := -C "$(CROSS_COMPILE)" 269endif 270endif 271 272compressor-$(CONFIG_KERNEL_GZIP) := gz 273compressor-$(CONFIG_KERNEL_XZ) := xz 274compressor-$(CONFIG_KERNEL_LZMA) := lzma 275compressor-$(CONFIG_KERNEL_LZO) := lzo 276 277# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd 278quiet_cmd_wrap = WRAP $@ 279 cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ 280 $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ 281 vmlinux 282 283image-$(CONFIG_PPC_PSERIES) += zImage.pseries 284image-$(CONFIG_PPC_POWERNV) += zImage.pseries 285image-$(CONFIG_PPC_MAPLE) += zImage.maple 286image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries 287image-$(CONFIG_PPC_PS3) += dtbImage.ps3 288image-$(CONFIG_PPC_CHRP) += zImage.chrp 289image-$(CONFIG_PPC_EFIKA) += zImage.chrp 290image-$(CONFIG_PPC_PMAC) += zImage.pmac 291image-$(CONFIG_PPC_HOLLY) += dtbImage.holly 292image-$(CONFIG_DEFAULT_UIMAGE) += uImage 293image-$(CONFIG_EPAPR_BOOT) += zImage.epapr 294 295# 296# Targets which embed a device tree blob 297# 298# Theses are default targets to build images which embed device tree blobs. 299# They are only required on boards which do not have FDT support in firmware. 300# Boards with newish u-boot firmware can use the uImage target above 301# 302 303# Board ports in arch/powerpc/platform/40x/Kconfig 304image-$(CONFIG_HOTFOOT) += cuImage.hotfoot 305image-$(CONFIG_ACADIA) += cuImage.acadia 306image-$(CONFIG_OBS600) += uImage.obs600 307 308# Board ports in arch/powerpc/platform/44x/Kconfig 309image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony 310image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo 311image-$(CONFIG_SAM440EP) += cuImage.sam440ep 312image-$(CONFIG_SEQUOIA) += cuImage.sequoia 313image-$(CONFIG_RAINIER) += cuImage.rainier 314image-$(CONFIG_TAISHAN) += cuImage.taishan 315image-$(CONFIG_KATMAI) += cuImage.katmai 316image-$(CONFIG_WARP) += cuImage.warp 317image-$(CONFIG_YOSEMITE) += cuImage.yosemite 318image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ 319 treeImage.iss4xx-mpic 320image-$(CONFIG_CURRITUCK) += treeImage.currituck 321image-$(CONFIG_AKEBONO) += treeImage.akebono 322 323# Board ports in arch/powerpc/platform/8xx/Kconfig 324image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads 325image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads 326image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc 327image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ 328 dtbImage.adder875-redboot 329 330# Board ports in arch/powerpc/platform/52xx/Kconfig 331image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 332image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b 333image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 334 335# Board ports in arch/powerpc/platform/82xx/Kconfig 336image-$(CONFIG_EP8248E) += dtbImage.ep8248e 337 338# Board ports in arch/powerpc/platform/83xx/Kconfig 339image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb 340image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ 341 cuImage.mpc8349emitxgp 342image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot 343 344# Board ports in arch/powerpc/platform/85xx/Kconfig 345image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds 346image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ 347 cuImage.mpc8572ds 348image-$(CONFIG_TQM8540) += cuImage.tqm8540 349image-$(CONFIG_TQM8541) += cuImage.tqm8541 350image-$(CONFIG_TQM8548) += cuImage.tqm8548 351image-$(CONFIG_TQM8555) += cuImage.tqm8555 352image-$(CONFIG_TQM8560) += cuImage.tqm8560 353image-$(CONFIG_KSI8560) += cuImage.ksi8560 354 355# Board ports in arch/powerpc/platform/86xx/Kconfig 356image-$(CONFIG_MVME7100) += dtbImage.mvme7100 357 358# Board ports in arch/powerpc/platform/embedded6xx/Kconfig 359image-$(CONFIG_STORCENTER) += cuImage.storcenter 360image-$(CONFIG_GAMECUBE) += dtbImage.gamecube 361image-$(CONFIG_WII) += dtbImage.wii 362image-$(CONFIG_MVME5100) += dtbImage.mvme5100 363 364# Board port in arch/powerpc/platform/amigaone/Kconfig 365image-$(CONFIG_AMIGAONE) += cuImage.amigaone 366 367image-$(CONFIG_PPC_MICROWATT) += dtbImage.microwatt 368 369# For 32-bit powermacs, build the COFF and miboot images 370# as well as the ELF images. 371ifdef CONFIG_PPC32 372image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot 373endif 374 375# Allow extra targets to be added to the defconfig 376image-y += $(CONFIG_EXTRA_TARGETS) 377 378initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) 379initrd-y := $(patsubst zImage%, zImage.initrd%, \ 380 $(patsubst dtbImage%, dtbImage.initrd%, \ 381 $(patsubst simpleImage%, simpleImage.initrd%, \ 382 $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) 383initrd-y := $(filter-out $(image-y), $(initrd-y)) 384targets += $(image-y) $(initrd-y) 385targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ 386 $(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y)))) 387targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ 388 $(patsubst $(x).%, dts/fsl/%.dtb, $(filter $(x).%, $(image-y)))) 389 390$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz 391 392# Don't put the ramdisk on the pattern rule; when its missing make will try 393# the pattern rule with less dependencies that also matches (even with the 394# hard dependency listed). 395$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE 396 $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) 397 398$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE 399 $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) 400 401# dtbImage% - a dtbImage is a zImage with an embedded device tree blob 402$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 403 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 404 405$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 406 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb) 407 408# This cannot be in the root of $(src) as the zImage rule always adds a $(obj) 409# prefix 410$(obj)/vmlinux.strip: vmlinux 411 $(STRIP) -s -R .comment $< -o $@ 412 413$(obj)/uImage: vmlinux $(wrapperbits) FORCE 414 $(call if_changed,wrap,uboot) 415 416$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 417 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 418 419$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 420 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) 421 422$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 423 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 424 425$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 426 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb) 427 428$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 429 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 430 431$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 432 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb) 433 434$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 435 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 436 437$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 438 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb) 439 440# Needed for the above targets to work with dts/fsl/ files 441$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb 442 @cp $< $@ 443 444# If there isn't a platform selected then just strip the vmlinux. 445ifeq (,$(image-y)) 446image-y := vmlinux.strip 447endif 448 449$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) 450 $(Q)rm -f $@; ln $< $@ 451$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) 452 $(Q)rm -f $@; ln $< $@ 453 454# anything not in $(targets) 455clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ 456 zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ 457 zImage.miboot zImage.pmac zImage.pseries \ 458 zImage.maple simpleImage.* otheros.bld 459 460# clean up files cached by wrapper 461clean-kernel-base := vmlinux.strip vmlinux.bin 462clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) 463clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) 464# clean-files are relative to $(obj). 465clean-files += $(addprefix ../../../, $(clean-kernel)) 466 467WRAPPER_OBJDIR := /usr/lib/kernel-wrapper 468WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts 469WRAPPER_BINDIR := /usr/sbin 470INSTALL := install 471 472extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) 473hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs)) 474wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper 475dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) 476 477all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) 478 479quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) 480 cmd_mkdir = mkdir -p $@ 481 482quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) 483 cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ 484 485quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) 486 cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ 487 488quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 489 cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ 490 491quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 492 cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ 493 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ 494 -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ 495 496 497$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): 498 $(call cmd,mkdir) 499 500$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) 501 $(call cmd,install) 502 503$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) 504 $(call cmd,install_exe) 505 506$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) 507 $(call cmd,install_dts) 508 509$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) 510 $(call cmd,install_wrapper) 511 512$(obj)/bootwrapper_install: $(all-installed) 513