1/* This file is subject to the terms and conditions of the GNU General Public 2 * License. See the file "COPYING" in the main directory of this archive 3 * for more details. 4 * 5 * Copyright (C) 1999-2007 by Helge Deller <deller@gmx.de> 6 * Copyright 1999 SuSE GmbH (Philipp Rumpf) 7 * Copyright 1999 Philipp Rumpf (prumpf@tux.org) 8 * Copyright 2000 Hewlett Packard (Paul Bame, bame@puffin.external.hp.com) 9 * Copyright (C) 2001 Grant Grundler (Hewlett Packard) 10 * Copyright (C) 2004 Kyle McMartin <kyle@debian.org> 11 * 12 * Initial Version 04-23-1999 by Helge Deller <deller@gmx.de> 13 */ 14 15#include <asm/asm-offsets.h> 16#include <asm/psw.h> 17#include <asm/pdc.h> 18 19#include <asm/assembly.h> 20#include <asm/pgtable.h> 21 22#include <linux/linkage.h> 23#include <linux/init.h> 24 25 .level LEVEL 26 27 __INITDATA 28ENTRY(boot_args) 29 .word 0 /* arg0 */ 30 .word 0 /* arg1 */ 31 .word 0 /* arg2 */ 32 .word 0 /* arg3 */ 33END(boot_args) 34 35 __HEAD 36 37 .align 4 38 .import init_thread_union,data 39 .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ 40#ifndef CONFIG_64BIT 41 .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ 42 .import $global$ /* forward declaration */ 43#endif /*!CONFIG_64BIT*/ 44ENTRY(parisc_kernel_start) 45 .proc 46 .callinfo 47 48 /* Make sure sr4-sr7 are set to zero for the kernel address space */ 49 mtsp %r0,%sr4 50 mtsp %r0,%sr5 51 mtsp %r0,%sr6 52 mtsp %r0,%sr7 53 54 /* Clear BSS (shouldn't the boot loader do this?) */ 55 56 .import __bss_start,data 57 .import __bss_stop,data 58 59 load32 PA(__bss_start),%r3 60 load32 PA(__bss_stop),%r4 61$bss_loop: 62 cmpb,<<,n %r3,%r4,$bss_loop 63 stw,ma %r0,4(%r3) 64 65 /* Save away the arguments the boot loader passed in (32 bit args) */ 66 load32 PA(boot_args),%r1 67 stw,ma %arg0,4(%r1) 68 stw,ma %arg1,4(%r1) 69 stw,ma %arg2,4(%r1) 70 stw,ma %arg3,4(%r1) 71 72 /* Initialize startup VM. Just map first 8/16 MB of memory */ 73 load32 PA(swapper_pg_dir),%r4 74 mtctl %r4,%cr24 /* Initialize kernel root pointer */ 75 mtctl %r4,%cr25 /* Initialize user root pointer */ 76 77#if PT_NLEVELS == 3 78 /* Set pmd in pgd */ 79 load32 PA(pmd0),%r5 80 shrd %r5,PxD_VALUE_SHIFT,%r3 81 ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 82 stw %r3,ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4) 83 ldo ASM_PMD_ENTRY*ASM_PMD_ENTRY_SIZE(%r5),%r4 84#else 85 /* 2-level page table, so pmd == pgd */ 86 ldo ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4 87#endif 88 89 /* Fill in pmd with enough pte directories */ 90 load32 PA(pg0),%r1 91 SHRREG %r1,PxD_VALUE_SHIFT,%r3 92 ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 93 94 ldi ASM_PT_INITIAL,%r1 95 961: 97 stw %r3,0(%r4) 98 ldo (PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 99 addib,> -1,%r1,1b 100#if PT_NLEVELS == 3 101 ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 102#else 103 ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 104#endif 105 106 107 /* Now initialize the PTEs themselves. We use RWX for 108 * everything ... it will get remapped correctly later */ 109 ldo 0+_PAGE_KERNEL_RWX(%r0),%r3 /* Hardwired 0 phys addr start */ 110 ldi (1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */ 111 load32 PA(pg0),%r1 112 113$pgt_fill_loop: 114 STREGM %r3,ASM_PTE_ENTRY_SIZE(%r1) 115 ldo (1<<PFN_PTE_SHIFT)(%r3),%r3 /* add one PFN */ 116 addib,> -1,%r11,$pgt_fill_loop 117 nop 118 119 /* Load the return address...er...crash 'n burn */ 120 copy %r0,%r2 121 122 /* And the RFI Target address too */ 123 load32 start_parisc,%r11 124 125 /* And the initial task pointer */ 126 load32 init_thread_union,%r6 127 mtctl %r6,%cr30 128 129 /* And the stack pointer too */ 130 ldo THREAD_SZ_ALGN(%r6),%sp 131 132#ifdef CONFIG_SMP 133 /* Set the smp rendezvous address into page zero. 134 ** It would be safer to do this in init_smp_config() but 135 ** it's just way easier to deal with here because 136 ** of 64-bit function ptrs and the address is local to this file. 137 */ 138 load32 PA(smp_slave_stext),%r10 139 stw %r10,0x10(%r0) /* MEM_RENDEZ */ 140 stw %r0,0x28(%r0) /* MEM_RENDEZ_HI - assume addr < 4GB */ 141 142 /* FALLTHROUGH */ 143 .procend 144 145 /* 146 ** Code Common to both Monarch and Slave processors. 147 ** Entry: 148 ** 149 ** 1.1: 150 ** %r11 must contain RFI target address. 151 ** %r25/%r26 args to pass to target function 152 ** %r2 in case rfi target decides it didn't like something 153 ** 154 ** 2.0w: 155 ** %r3 PDCE_PROC address 156 ** %r11 RFI target address 157 ** 158 ** Caller must init: SR4-7, %sp, %r10, %cr24/25, 159 */ 160common_stext: 161 .proc 162 .callinfo 163#else 164 /* Clear PDC entry point - we won't use it */ 165 stw %r0,0x10(%r0) /* MEM_RENDEZ */ 166 stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */ 167#endif /*CONFIG_SMP*/ 168 169#ifdef CONFIG_64BIT 170 tophys_r1 %sp 171 172 /* Save the rfi target address */ 173 ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10 174 tophys_r1 %r10 175 std %r11, TASK_PT_GR11(%r10) 176 /* Switch to wide mode Superdome doesn't support narrow PDC 177 ** calls. 178 */ 1791: mfia %rp /* clear upper part of pcoq */ 180 ldo 2f-1b(%rp),%rp 181 depdi 0,31,32,%rp 182 bv (%rp) 183 ssm PSW_SM_W,%r0 184 185 /* Set Wide mode as the "Default" (eg for traps) 186 ** First trap occurs *right* after (or part of) rfi for slave CPUs. 187 ** Someday, palo might not do this for the Monarch either. 188 */ 1892: 190#define MEM_PDC_LO 0x388 191#define MEM_PDC_HI 0x35C 192 ldw MEM_PDC_LO(%r0),%r3 193 ldw MEM_PDC_HI(%r0),%r6 194 depd %r6, 31, 32, %r3 /* move to upper word */ 195 196 mfctl %cr30,%r6 /* PCX-W2 firmware bug */ 197 198 ldo PDC_PSW(%r0),%arg0 /* 21 */ 199 ldo PDC_PSW_SET_DEFAULTS(%r0),%arg1 /* 2 */ 200 ldo PDC_PSW_WIDE_BIT(%r0),%arg2 /* 2 */ 201 load32 PA(stext_pdc_ret), %rp 202 bv (%r3) 203 copy %r0,%arg3 204 205stext_pdc_ret: 206 mtctl %r6,%cr30 /* restore task thread info */ 207 208 /* restore rfi target address*/ 209 ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10 210 tophys_r1 %r10 211 ldd TASK_PT_GR11(%r10), %r11 212 tovirt_r1 %sp 213#endif 214 215 /* PARANOID: clear user scratch/user space SR's */ 216 mtsp %r0,%sr0 217 mtsp %r0,%sr1 218 mtsp %r0,%sr2 219 mtsp %r0,%sr3 220 221 /* Initialize Protection Registers */ 222 mtctl %r0,%cr8 223 mtctl %r0,%cr9 224 mtctl %r0,%cr12 225 mtctl %r0,%cr13 226 227 /* Initialize the global data pointer */ 228 loadgp 229 230 /* Set up our interrupt table. HPMCs might not work after this! 231 * 232 * We need to install the correct iva for PA1.1 or PA2.0. The 233 * following short sequence of instructions can determine this 234 * (without being illegal on a PA1.1 machine). 235 */ 236#ifndef CONFIG_64BIT 237 ldi 32,%r10 238 mtctl %r10,%cr11 239 .level 2.0 240 mfctl,w %cr11,%r10 241 .level 1.1 242 comib,<>,n 0,%r10,$is_pa20 243 ldil L%PA(fault_vector_11),%r10 244 b $install_iva 245 ldo R%PA(fault_vector_11)(%r10),%r10 246 247$is_pa20: 248 .level LEVEL /* restore 1.1 || 2.0w */ 249#endif /*!CONFIG_64BIT*/ 250 load32 PA(fault_vector_20),%r10 251 252$install_iva: 253 mtctl %r10,%cr14 254 255 b aligned_rfi /* Prepare to RFI! Man all the cannons! */ 256 nop 257 258 .align 128 259aligned_rfi: 260 pcxt_ssm_bug 261 262 rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */ 263 /* Don't need NOPs, have 8 compliant insn before rfi */ 264 265 mtctl %r0,%cr17 /* Clear IIASQ tail */ 266 mtctl %r0,%cr17 /* Clear IIASQ head */ 267 268 /* Load RFI target into PC queue */ 269 mtctl %r11,%cr18 /* IIAOQ head */ 270 ldo 4(%r11),%r11 271 mtctl %r11,%cr18 /* IIAOQ tail */ 272 273 load32 KERNEL_PSW,%r10 274 mtctl %r10,%ipsw 275 276 /* Jump through hyperspace to Virt Mode */ 277 rfi 278 nop 279 280 .procend 281 282#ifdef CONFIG_SMP 283 284 .import smp_init_current_idle_task,data 285 .import smp_callin,code 286 287#ifndef CONFIG_64BIT 288smp_callin_rtn: 289 .proc 290 .callinfo 291 break 1,1 /* Break if returned from start_secondary */ 292 nop 293 nop 294 .procend 295#endif /*!CONFIG_64BIT*/ 296 297/*************************************************************************** 298* smp_slave_stext is executed by all non-monarch Processors when the Monarch 299* pokes the slave CPUs in smp.c:smp_boot_cpus(). 300* 301* Once here, registers values are initialized in order to branch to virtual 302* mode. Once all available/eligible CPUs are in virtual mode, all are 303* released and start out by executing their own idle task. 304*****************************************************************************/ 305smp_slave_stext: 306 .proc 307 .callinfo 308 309 /* 310 ** Initialize Space registers 311 */ 312 mtsp %r0,%sr4 313 mtsp %r0,%sr5 314 mtsp %r0,%sr6 315 mtsp %r0,%sr7 316 317 /* Initialize the SP - monarch sets up smp_init_current_idle_task */ 318 load32 PA(smp_init_current_idle_task),%sp 319 LDREG 0(%sp),%sp /* load task address */ 320 tophys_r1 %sp 321 LDREG TASK_THREAD_INFO(%sp),%sp 322 mtctl %sp,%cr30 /* store in cr30 */ 323 ldo THREAD_SZ_ALGN(%sp),%sp 324 325 /* point CPU to kernel page tables */ 326 load32 PA(swapper_pg_dir),%r4 327 mtctl %r4,%cr24 /* Initialize kernel root pointer */ 328 mtctl %r4,%cr25 /* Initialize user root pointer */ 329 330#ifdef CONFIG_64BIT 331 /* Setup PDCE_PROC entry */ 332 copy %arg0,%r3 333#else 334 /* Load RFI *return* address in case smp_callin bails */ 335 load32 smp_callin_rtn,%r2 336#endif 337 338 /* Load RFI target address. */ 339 load32 smp_callin,%r11 340 341 /* ok...common code can handle the rest */ 342 b common_stext 343 nop 344 345 .procend 346#endif /* CONFIG_SMP */ 347 348ENDPROC(parisc_kernel_start) 349 350#ifndef CONFIG_64BIT 351 .section .data..read_mostly 352 353 .align 4 354 .export $global$,data 355 356 .type $global$,@object 357 .size $global$,4 358$global$: 359 .word 0 360#endif /*!CONFIG_64BIT*/ 361