xref: /linux/arch/mips/txx9/generic/pci.c (revision 9e9f60108423f18a99c9cc93ef7f23490ecc709b)
1 /*
2  * linux/arch/mips/txx9/pci.c
3  *
4  * Based on linux/arch/mips/txx9/rbtx4927/setup.c,
5  *	    linux/arch/mips/txx9/rbtx4938/setup.c,
6  *	    and RBTX49xx patch from CELF patch archive.
7  *
8  * Copyright 2001-2005 MontaVista Software Inc.
9  * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
10  * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
11  *
12  * This file is subject to the terms and conditions of the GNU General Public
13  * License.  See the file "COPYING" in the main directory of this archive
14  * for more details.
15  */
16 #include <linux/delay.h>
17 #include <linux/jiffies.h>
18 #include <linux/io.h>
19 #include <asm/txx9/generic.h>
20 #include <asm/txx9/pci.h>
21 #ifdef CONFIG_TOSHIBA_FPCIB0
22 #include <linux/interrupt.h>
23 #include <linux/slab.h>
24 #include <asm/i8259.h>
25 #include <asm/txx9/smsc_fdc37m81x.h>
26 #endif
27 
28 static int __init
29 early_read_config_word(struct pci_controller *hose,
30 		       int top_bus, int bus, int devfn, int offset, u16 *value)
31 {
32 	struct pci_dev fake_dev;
33 	struct pci_bus fake_bus;
34 
35 	fake_dev.bus = &fake_bus;
36 	fake_dev.sysdata = hose;
37 	fake_dev.devfn = devfn;
38 	fake_bus.number = bus;
39 	fake_bus.sysdata = hose;
40 	fake_bus.ops = hose->pci_ops;
41 
42 	if (bus != top_bus)
43 		/* Fake a parent bus structure. */
44 		fake_bus.parent = &fake_bus;
45 	else
46 		fake_bus.parent = NULL;
47 
48 	return pci_read_config_word(&fake_dev, offset, value);
49 }
50 
51 int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
52 			    int current_bus)
53 {
54 	u32 pci_devfn;
55 	unsigned short vid;
56 	int cap66 = -1;
57 	u16 stat;
58 
59 	/* It seems SLC90E66 needs some time after PCI reset... */
60 	mdelay(80);
61 
62 	printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
63 
64 	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
65 		if (PCI_FUNC(pci_devfn))
66 			continue;
67 		if (early_read_config_word(hose, top_bus, current_bus,
68 					   pci_devfn, PCI_VENDOR_ID, &vid) !=
69 		    PCIBIOS_SUCCESSFUL)
70 			continue;
71 		if (vid == 0xffff)
72 			continue;
73 
74 		/* check 66MHz capability */
75 		if (cap66 < 0)
76 			cap66 = 1;
77 		if (cap66) {
78 			early_read_config_word(hose, top_bus, current_bus,
79 					       pci_devfn, PCI_STATUS, &stat);
80 			if (!(stat & PCI_STATUS_66MHZ)) {
81 				printk(KERN_DEBUG
82 				       "PCI: %02x:%02x not 66MHz capable.\n",
83 				       current_bus, pci_devfn);
84 				cap66 = 0;
85 				break;
86 			}
87 		}
88 	}
89 	return cap66 > 0;
90 }
91 
92 static struct resource primary_pci_mem_res[2] = {
93 	{ .name = "PCI MEM" },
94 	{ .name = "PCI MMIO" },
95 };
96 static struct resource primary_pci_io_res = { .name = "PCI IO" };
97 struct pci_controller txx9_primary_pcic = {
98 	.mem_resource = &primary_pci_mem_res[0],
99 	.io_resource = &primary_pci_io_res,
100 };
101 
102 #ifdef CONFIG_64BIT
103 int txx9_pci_mem_high __initdata = 1;
104 #else
105 int txx9_pci_mem_high __initdata;
106 #endif
107 
108 /*
109  * allocate pci_controller and resources.
110  * mem_base, io_base: physical address.	 0 for auto assignment.
111  * mem_size and io_size means max size on auto assignment.
112  * pcic must be &txx9_primary_pcic or NULL.
113  */
114 struct pci_controller *__init
115 txx9_alloc_pci_controller(struct pci_controller *pcic,
116 			  unsigned long mem_base, unsigned long mem_size,
117 			  unsigned long io_base, unsigned long io_size)
118 {
119 	struct pcic {
120 		struct pci_controller c;
121 		struct resource r_mem[2];
122 		struct resource r_io;
123 	} *new = NULL;
124 	int min_size = 0x10000;
125 
126 	if (!pcic) {
127 		new = kzalloc(sizeof(*new), GFP_KERNEL);
128 		if (!new)
129 			return NULL;
130 		new->r_mem[0].name = "PCI mem";
131 		new->r_mem[1].name = "PCI mmio";
132 		new->r_io.name = "PCI io";
133 		new->c.mem_resource = new->r_mem;
134 		new->c.io_resource = &new->r_io;
135 		pcic = &new->c;
136 	} else
137 		BUG_ON(pcic != &txx9_primary_pcic);
138 	pcic->io_resource->flags = IORESOURCE_IO;
139 
140 	/*
141 	 * for auto assignment, first search a (big) region for PCI
142 	 * MEM, then search a region for PCI IO.
143 	 */
144 	if (mem_base) {
145 		pcic->mem_resource[0].start = mem_base;
146 		pcic->mem_resource[0].end = mem_base + mem_size - 1;
147 		if (request_resource(&iomem_resource, &pcic->mem_resource[0]))
148 			goto free_and_exit;
149 	} else {
150 		unsigned long min = 0, max = 0x20000000; /* low 512MB */
151 		if (!mem_size) {
152 			/* default size for auto assignment */
153 			if (txx9_pci_mem_high)
154 				mem_size = 0x20000000;	/* mem:512M(max) */
155 			else
156 				mem_size = 0x08000000;	/* mem:128M(max) */
157 		}
158 		if (txx9_pci_mem_high) {
159 			min = 0x20000000;
160 			max = 0xe0000000;
161 		}
162 		/* search free region for PCI MEM */
163 		for (; mem_size >= min_size; mem_size /= 2) {
164 			if (allocate_resource(&iomem_resource,
165 					      &pcic->mem_resource[0],
166 					      mem_size, min, max,
167 					      mem_size, NULL, NULL) == 0)
168 				break;
169 		}
170 		if (mem_size < min_size)
171 			goto free_and_exit;
172 	}
173 
174 	pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
175 	if (io_base) {
176 		pcic->mem_resource[1].start = io_base;
177 		pcic->mem_resource[1].end = io_base + io_size - 1;
178 		if (request_resource(&iomem_resource, &pcic->mem_resource[1]))
179 			goto release_and_exit;
180 	} else {
181 		if (!io_size)
182 			/* default size for auto assignment */
183 			io_size = 0x01000000;	/* io:16M(max) */
184 		/* search free region for PCI IO in low 512MB */
185 		for (; io_size >= min_size; io_size /= 2) {
186 			if (allocate_resource(&iomem_resource,
187 					      &pcic->mem_resource[1],
188 					      io_size, 0, 0x20000000,
189 					      io_size, NULL, NULL) == 0)
190 				break;
191 		}
192 		if (io_size < min_size)
193 			goto release_and_exit;
194 		io_base = pcic->mem_resource[1].start;
195 	}
196 
197 	pcic->mem_resource[0].flags = IORESOURCE_MEM;
198 	if (pcic == &txx9_primary_pcic &&
199 	    mips_io_port_base == (unsigned long)-1) {
200 		/* map ioport 0 to PCI I/O space address 0 */
201 		set_io_port_base(IO_BASE + pcic->mem_resource[1].start);
202 		pcic->io_resource->start = 0;
203 		pcic->io_offset = 0;	/* busaddr == ioaddr */
204 		pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start;
205 	} else {
206 		/* physaddr to ioaddr */
207 		pcic->io_resource->start =
208 			io_base - (mips_io_port_base - IO_BASE);
209 		pcic->io_offset = io_base - (mips_io_port_base - IO_BASE);
210 		pcic->io_map_base = mips_io_port_base;
211 	}
212 	pcic->io_resource->end = pcic->io_resource->start + io_size - 1;
213 
214 	pcic->mem_offset = 0;	/* busaddr == physaddr */
215 
216 	printk(KERN_INFO "PCI: IO %pR MEM %pR\n",
217 	       &pcic->mem_resource[1], &pcic->mem_resource[0]);
218 
219 	/* register_pci_controller() will request MEM resource */
220 	release_resource(&pcic->mem_resource[0]);
221 	return pcic;
222  release_and_exit:
223 	release_resource(&pcic->mem_resource[0]);
224  free_and_exit:
225 	kfree(new);
226 	printk(KERN_ERR "PCI: Failed to allocate resources.\n");
227 	return NULL;
228 }
229 
230 static int __init
231 txx9_arch_pci_init(void)
232 {
233 	PCIBIOS_MIN_IO = 0x8000;	/* reseve legacy I/O space */
234 	return 0;
235 }
236 arch_initcall(txx9_arch_pci_init);
237 
238 /* IRQ/IDSEL mapping */
239 int txx9_pci_option =
240 #ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT
241 	TXX9_PCI_OPT_PICMG |
242 #endif
243 	TXX9_PCI_OPT_CLK_AUTO;
244 
245 enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT;
246 
247 #ifdef CONFIG_TOSHIBA_FPCIB0
248 static irqreturn_t i8259_interrupt(int irq, void *dev_id)
249 {
250 	int isairq;
251 
252 	isairq = i8259_irq();
253 	if (unlikely(isairq <= I8259A_IRQ_BASE))
254 		return IRQ_NONE;
255 	generic_handle_irq(isairq);
256 	return IRQ_HANDLED;
257 }
258 
259 static int txx9_i8259_irq_setup(int irq)
260 {
261 	int err;
262 
263 	init_i8259_irqs();
264 	err = request_irq(irq, &i8259_interrupt, IRQF_SHARED,
265 			  "cascade(i8259)", (void *)(long)irq);
266 	if (!err)
267 		printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq);
268 	return err;
269 }
270 
271 static void __init_refok quirk_slc90e66_bridge(struct pci_dev *dev)
272 {
273 	int irq;	/* PCI/ISA Bridge interrupt */
274 	u8 reg_64;
275 	u32 reg_b0;
276 	u8 reg_e1;
277 	irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */
278 	if (!irq)
279 		return;
280 	txx9_i8259_irq_setup(irq);
281 	pci_read_config_byte(dev, 0x64, &reg_64);
282 	pci_read_config_dword(dev, 0xb0, &reg_b0);
283 	pci_read_config_byte(dev, 0xe1, &reg_e1);
284 	/* serial irq control */
285 	reg_64 = 0xd0;
286 	/* serial irq pin */
287 	reg_b0 |= 0x00010000;
288 	/* ide irq on isa14 */
289 	reg_e1 &= 0xf0;
290 	reg_e1 |= 0x0d;
291 	pci_write_config_byte(dev, 0x64, reg_64);
292 	pci_write_config_dword(dev, 0xb0, reg_b0);
293 	pci_write_config_byte(dev, 0xe1, reg_e1);
294 
295 	smsc_fdc37m81x_init(0x3f0);
296 	smsc_fdc37m81x_config_beg();
297 	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
298 				  SMSC_FDC37M81X_KBD);
299 	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
300 	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
301 	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
302 				  1);
303 	smsc_fdc37m81x_config_end();
304 }
305 
306 static void quirk_slc90e66_ide(struct pci_dev *dev)
307 {
308 	unsigned char dat;
309 	int regs[2] = {0x41, 0x43};
310 	int i;
311 
312 	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
313 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14);
314 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat);
315 	printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat);
316 	/* enable SMSC SLC90E66 IDE */
317 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
318 		pci_read_config_byte(dev, regs[i], &dat);
319 		pci_write_config_byte(dev, regs[i], dat | 0x80);
320 		pci_read_config_byte(dev, regs[i], &dat);
321 		printk(KERN_CONT " IDETIM%d %02x", i, dat);
322 	}
323 	pci_read_config_byte(dev, 0x5c, &dat);
324 	/*
325 	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
326 	 *
327 	 * This line of code is intended to provide the user with a work
328 	 * around solution to the anomalies cited in SMSC's anomaly sheet
329 	 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
330 	 *
331 	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
332 	 */
333 	dat |= 0x01;
334 	pci_write_config_byte(dev, 0x5c, dat);
335 	pci_read_config_byte(dev, 0x5c, &dat);
336 	printk(KERN_CONT " REG5C %02x", dat);
337 	printk(KERN_CONT "\n");
338 }
339 #endif /* CONFIG_TOSHIBA_FPCIB0 */
340 
341 static void tc35815_fixup(struct pci_dev *dev)
342 {
343 	/* This device may have PM registers but not they are not supported. */
344 	if (dev->pm_cap) {
345 		dev_info(&dev->dev, "PM disabled\n");
346 		dev->pm_cap = 0;
347 	}
348 }
349 
350 static void final_fixup(struct pci_dev *dev)
351 {
352 	unsigned char bist;
353 
354 	/* Do build-in self test */
355 	if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL &&
356 	    (bist & PCI_BIST_CAPABLE)) {
357 		unsigned long timeout;
358 		pci_set_power_state(dev, PCI_D0);
359 		printk(KERN_INFO "PCI: %s BIST...", pci_name(dev));
360 		pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START);
361 		timeout = jiffies + HZ * 2;	/* timeout after 2 sec */
362 		do {
363 			pci_read_config_byte(dev, PCI_BIST, &bist);
364 			if (time_after(jiffies, timeout))
365 				break;
366 		} while (bist & PCI_BIST_START);
367 		if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START))
368 			printk(KERN_CONT "failed. (0x%x)\n", bist);
369 		else
370 			printk(KERN_CONT "OK.\n");
371 	}
372 }
373 
374 #ifdef CONFIG_TOSHIBA_FPCIB0
375 #define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
376 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
377 	quirk_slc90e66_bridge);
378 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
379 	quirk_slc90e66_ide);
380 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
381 	quirk_slc90e66_ide);
382 #endif
383 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
384 			PCI_DEVICE_ID_TOSHIBA_TC35815_NWU, tc35815_fixup);
385 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
386 			PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939, tc35815_fixup);
387 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
388 DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
389 
390 int pcibios_plat_dev_init(struct pci_dev *dev)
391 {
392 	return 0;
393 }
394 
395 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
396 {
397 	return txx9_board_vec->pci_map_irq(dev, slot, pin);
398 }
399 
400 char * (*txx9_board_pcibios_setup)(char *str) __initdata;
401 
402 char *__init txx9_pcibios_setup(char *str)
403 {
404 	if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
405 		return NULL;
406 	if (!strcmp(str, "picmg")) {
407 		/* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
408 		   (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
409 		txx9_pci_option |= TXX9_PCI_OPT_PICMG;
410 		return NULL;
411 	} else if (!strcmp(str, "nopicmg")) {
412 		/* non-PICMG compliant backplane (TOSHIBA
413 		   RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
414 		txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
415 		return NULL;
416 	} else if (!strncmp(str, "clk=", 4)) {
417 		char *val = str + 4;
418 		txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
419 		if (strcmp(val, "33") == 0)
420 			txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
421 		else if (strcmp(val, "66") == 0)
422 			txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
423 		else /* "auto" */
424 			txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
425 		return NULL;
426 	} else if (!strncmp(str, "err=", 4)) {
427 		if (!strcmp(str + 4, "panic"))
428 			txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
429 		else if (!strcmp(str + 4, "ignore"))
430 			txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
431 		return NULL;
432 	}
433 	return str;
434 }
435