1 // SPDX-License-Identifier: GPL-2.0 2 #include <linux/types.h> 3 #include <linux/i8253.h> 4 #include <linux/interrupt.h> 5 #include <linux/irq.h> 6 #include <linux/smp.h> 7 #include <linux/time.h> 8 #include <linux/clockchips.h> 9 10 #include <asm/sni.h> 11 #include <asm/time.h> 12 13 #define SNI_CLOCK_TICK_RATE 3686400 14 #define SNI_COUNTER2_DIV 64 15 #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) 16 17 static int a20r_set_periodic(struct clock_event_device *evt) 18 { 19 *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; 20 wmb(); 21 *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV; 22 wmb(); 23 *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8; 24 wmb(); 25 26 *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; 27 wmb(); 28 *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV; 29 wmb(); 30 *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8; 31 wmb(); 32 return 0; 33 } 34 35 static struct clock_event_device a20r_clockevent_device = { 36 .name = "a20r-timer", 37 .features = CLOCK_EVT_FEAT_PERIODIC, 38 39 /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */ 40 41 .rating = 300, 42 .irq = SNI_A20R_IRQ_TIMER, 43 .set_state_periodic = a20r_set_periodic, 44 }; 45 46 static irqreturn_t a20r_interrupt(int irq, void *dev_id) 47 { 48 struct clock_event_device *cd = dev_id; 49 50 *(volatile u8 *)A20R_PT_TIM0_ACK = 0; 51 wmb(); 52 53 cd->event_handler(cd); 54 55 return IRQ_HANDLED; 56 } 57 58 static struct irqaction a20r_irqaction = { 59 .handler = a20r_interrupt, 60 .flags = IRQF_PERCPU | IRQF_TIMER, 61 .name = "a20r-timer", 62 }; 63 64 /* 65 * a20r platform uses 2 counters to divide the input frequency. 66 * Counter 2 output is connected to Counter 0 & 1 input. 67 */ 68 static void __init sni_a20r_timer_setup(void) 69 { 70 struct clock_event_device *cd = &a20r_clockevent_device; 71 struct irqaction *action = &a20r_irqaction; 72 unsigned int cpu = smp_processor_id(); 73 74 cd->cpumask = cpumask_of(cpu); 75 clockevents_register_device(cd); 76 action->dev_id = cd; 77 setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction); 78 } 79 80 #define SNI_8254_TICK_RATE 1193182UL 81 82 #define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255) 83 84 static __init unsigned long dosample(void) 85 { 86 u32 ct0, ct1; 87 volatile u8 msb; 88 89 /* Start the counter. */ 90 outb_p(0x34, 0x43); 91 outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40); 92 outb(SNI_8254_TCSAMP_COUNTER >> 8, 0x40); 93 94 /* Get initial counter invariant */ 95 ct0 = read_c0_count(); 96 97 /* Latch and spin until top byte of counter0 is zero */ 98 do { 99 outb(0x00, 0x43); 100 (void) inb(0x40); 101 msb = inb(0x40); 102 ct1 = read_c0_count(); 103 } while (msb); 104 105 /* Stop the counter. */ 106 outb(0x38, 0x43); 107 /* 108 * Return the difference, this is how far the r4k counter increments 109 * for every 1/HZ seconds. We round off the nearest 1 MHz of master 110 * clock (= 1000000 / HZ / 2). 111 */ 112 /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/ 113 return (ct1 - ct0) / (500000/HZ) * (500000/HZ); 114 } 115 116 /* 117 * Here we need to calibrate the cycle counter to at least be close. 118 */ 119 void __init plat_time_init(void) 120 { 121 unsigned long r4k_ticks[3]; 122 unsigned long r4k_tick; 123 124 /* 125 * Figure out the r4k offset, the algorithm is very simple and works in 126 * _all_ cases as long as the 8254 counter register itself works ok (as 127 * an interrupt driving timer it does not because of bug, this is why 128 * we are using the onchip r4k counter/compare register to serve this 129 * purpose, but for r4k_offset calculation it will work ok for us). 130 * There are other very complicated ways of performing this calculation 131 * but this one works just fine so I am not going to futz around. ;-) 132 */ 133 printk(KERN_INFO "Calibrating system timer... "); 134 dosample(); /* Prime cache. */ 135 dosample(); /* Prime cache. */ 136 /* Zero is NOT an option. */ 137 do { 138 r4k_ticks[0] = dosample(); 139 } while (!r4k_ticks[0]); 140 do { 141 r4k_ticks[1] = dosample(); 142 } while (!r4k_ticks[1]); 143 144 if (r4k_ticks[0] != r4k_ticks[1]) { 145 printk("warning: timer counts differ, retrying... "); 146 r4k_ticks[2] = dosample(); 147 if (r4k_ticks[2] == r4k_ticks[0] 148 || r4k_ticks[2] == r4k_ticks[1]) 149 r4k_tick = r4k_ticks[2]; 150 else { 151 printk("disagreement, using average... "); 152 r4k_tick = (r4k_ticks[0] + r4k_ticks[1] 153 + r4k_ticks[2]) / 3; 154 } 155 } else 156 r4k_tick = r4k_ticks[0]; 157 158 printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick, 159 (int) (r4k_tick / (500000 / HZ)), 160 (int) (r4k_tick % (500000 / HZ))); 161 162 mips_hpt_frequency = r4k_tick * HZ; 163 164 switch (sni_brd_type) { 165 case SNI_BRD_10: 166 case SNI_BRD_10NEW: 167 case SNI_BRD_TOWER_OASIC: 168 case SNI_BRD_MINITOWER: 169 sni_a20r_timer_setup(); 170 break; 171 } 172 setup_pit_timer(); 173 } 174