xref: /linux/arch/mips/sibyte/sb1250/smp.c (revision 2f4c53349961c8ca480193e47da4d44fdb8335a8)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
4  */
5 
6 #include <linux/init.h>
7 #include <linux/delay.h>
8 #include <linux/interrupt.h>
9 #include <linux/smp.h>
10 #include <linux/kernel_stat.h>
11 #include <linux/sched/task_stack.h>
12 
13 #include <asm/mmu_context.h>
14 #include <asm/io.h>
15 #include <asm/fw/cfe/cfe_api.h>
16 #include <asm/sibyte/sb1250.h>
17 #include <asm/sibyte/sb1250_regs.h>
18 #include <asm/sibyte/sb1250_int.h>
19 
20 static void *mailbox_set_regs[] = {
21 	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
22 	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
23 };
24 
25 static void *mailbox_clear_regs[] = {
26 	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
27 	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
28 };
29 
30 static void *mailbox_regs[] = {
31 	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
32 	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
33 };
34 
35 /*
36  * SMP init and finish on secondary CPUs
37  */
38 void sb1250_smp_init(void)
39 {
40 	unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
41 		STATUSF_IP1 | STATUSF_IP0;
42 
43 	/* Set interrupt mask, but don't enable */
44 	change_c0_status(ST0_IM, imask);
45 }
46 
47 /*
48  * These are routines for dealing with the sb1250 smp capabilities
49  * independent of board/firmware
50  */
51 
52 /*
53  * Simple enough; everything is set up, so just poke the appropriate mailbox
54  * register, and we should be set
55  */
56 static void sb1250_send_ipi_single(int cpu, unsigned int action)
57 {
58 	__raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
59 }
60 
61 static inline void sb1250_send_ipi_mask(const struct cpumask *mask,
62 					unsigned int action)
63 {
64 	unsigned int i;
65 
66 	for_each_cpu(i, mask)
67 		sb1250_send_ipi_single(i, action);
68 }
69 
70 /*
71  * Code to run on secondary just after probing the CPU
72  */
73 static void sb1250_init_secondary(void)
74 {
75 	extern void sb1250_smp_init(void);
76 
77 	sb1250_smp_init();
78 }
79 
80 /*
81  * Do any tidying up before marking online and running the idle
82  * loop
83  */
84 static void sb1250_smp_finish(void)
85 {
86 	extern void sb1250_clockevent_init(void);
87 
88 	sb1250_clockevent_init();
89 	local_irq_enable();
90 }
91 
92 /*
93  * Setup the PC, SP, and GP of a secondary processor and start it
94  * running!
95  */
96 static int sb1250_boot_secondary(int cpu, struct task_struct *idle)
97 {
98 	int retval;
99 
100 	retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
101 			       __KSTK_TOS(idle),
102 			       (unsigned long)task_thread_info(idle), 0);
103 	if (retval != 0)
104 		printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
105 	return retval;
106 }
107 
108 /*
109  * Use CFE to find out how many CPUs are available, setting up
110  * cpu_possible_mask and the logical/physical mappings.
111  * XXXKW will the boot CPU ever not be physical 0?
112  *
113  * Common setup before any secondaries are started
114  */
115 static void __init sb1250_smp_setup(void)
116 {
117 	int i, num;
118 
119 	init_cpu_possible(cpumask_of(0));
120 	__cpu_number_map[0] = 0;
121 	__cpu_logical_map[0] = 0;
122 
123 	for (i = 1, num = 0; i < NR_CPUS; i++) {
124 		if (cfe_cpu_stop(i) == 0) {
125 			set_cpu_possible(i, true);
126 			__cpu_number_map[i] = ++num;
127 			__cpu_logical_map[num] = i;
128 		}
129 	}
130 	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
131 }
132 
133 static void __init sb1250_prepare_cpus(unsigned int max_cpus)
134 {
135 }
136 
137 const struct plat_smp_ops sb_smp_ops = {
138 	.send_ipi_single	= sb1250_send_ipi_single,
139 	.send_ipi_mask		= sb1250_send_ipi_mask,
140 	.init_secondary		= sb1250_init_secondary,
141 	.smp_finish		= sb1250_smp_finish,
142 	.boot_secondary		= sb1250_boot_secondary,
143 	.smp_setup		= sb1250_smp_setup,
144 	.prepare_cpus		= sb1250_prepare_cpus,
145 };
146 
147 void sb1250_mailbox_interrupt(void)
148 {
149 	int cpu = smp_processor_id();
150 	int irq = K_INT_MBOX_0;
151 	unsigned int action;
152 
153 	kstat_incr_irq_this_cpu(irq);
154 	/* Load the mailbox register to figure out what we're supposed to do */
155 	action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
156 
157 	/* Clear the mailbox to clear the interrupt */
158 	____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
159 
160 	if (action & SMP_RESCHEDULE_YOURSELF)
161 		scheduler_ipi();
162 
163 	if (action & SMP_CALL_FUNCTION) {
164 		irq_enter();
165 		generic_smp_call_function_interrupt();
166 		irq_exit();
167 	}
168 }
169