1 /* 2 * Code to handle IP32 IRQs 3 * 4 * This file is subject to the terms and conditions of the GNU General Public 5 * License. See the file "COPYING" in the main directory of this archive 6 * for more details. 7 * 8 * Copyright (C) 2000 Harald Koerfgen 9 * Copyright (C) 2001 Keith M Wesolowski 10 */ 11 #include <linux/init.h> 12 #include <linux/kernel_stat.h> 13 #include <linux/types.h> 14 #include <linux/interrupt.h> 15 #include <linux/irq.h> 16 #include <linux/bitops.h> 17 #include <linux/kernel.h> 18 #include <linux/mm.h> 19 #include <linux/random.h> 20 #include <linux/sched.h> 21 22 #include <asm/irq_cpu.h> 23 #include <asm/mipsregs.h> 24 #include <asm/signal.h> 25 #include <asm/system.h> 26 #include <asm/time.h> 27 #include <asm/ip32/crime.h> 28 #include <asm/ip32/mace.h> 29 #include <asm/ip32/ip32_ints.h> 30 31 /* issue a PIO read to make sure no PIO writes are pending */ 32 static void inline flush_crime_bus(void) 33 { 34 crime->control; 35 } 36 37 static void inline flush_mace_bus(void) 38 { 39 mace->perif.ctrl.misc; 40 } 41 42 /* 43 * O2 irq map 44 * 45 * IP0 -> software (ignored) 46 * IP1 -> software (ignored) 47 * IP2 -> (irq0) C crime 1.1 all interrupts; crime 1.5 ??? 48 * IP3 -> (irq1) X unknown 49 * IP4 -> (irq2) X unknown 50 * IP5 -> (irq3) X unknown 51 * IP6 -> (irq4) X unknown 52 * IP7 -> (irq5) 7 CPU count/compare timer (system timer) 53 * 54 * crime: (C) 55 * 56 * CRIME_INT_STAT 31:0: 57 * 58 * 0 -> 8 Video in 1 59 * 1 -> 9 Video in 2 60 * 2 -> 10 Video out 61 * 3 -> 11 Mace ethernet 62 * 4 -> S SuperIO sub-interrupt 63 * 5 -> M Miscellaneous sub-interrupt 64 * 6 -> A Audio sub-interrupt 65 * 7 -> 15 PCI bridge errors 66 * 8 -> 16 PCI SCSI aic7xxx 0 67 * 9 -> 17 PCI SCSI aic7xxx 1 68 * 10 -> 18 PCI slot 0 69 * 11 -> 19 unused (PCI slot 1) 70 * 12 -> 20 unused (PCI slot 2) 71 * 13 -> 21 unused (PCI shared 0) 72 * 14 -> 22 unused (PCI shared 1) 73 * 15 -> 23 unused (PCI shared 2) 74 * 16 -> 24 GBE0 (E) 75 * 17 -> 25 GBE1 (E) 76 * 18 -> 26 GBE2 (E) 77 * 19 -> 27 GBE3 (E) 78 * 20 -> 28 CPU errors 79 * 21 -> 29 Memory errors 80 * 22 -> 30 RE empty edge (E) 81 * 23 -> 31 RE full edge (E) 82 * 24 -> 32 RE idle edge (E) 83 * 25 -> 33 RE empty level 84 * 26 -> 34 RE full level 85 * 27 -> 35 RE idle level 86 * 28 -> 36 unused (software 0) (E) 87 * 29 -> 37 unused (software 1) (E) 88 * 30 -> 38 unused (software 2) - crime 1.5 CPU SysCorError (E) 89 * 31 -> 39 VICE 90 * 91 * S, M, A: Use the MACE ISA interrupt register 92 * MACE_ISA_INT_STAT 31:0 93 * 94 * 0-7 -> 40-47 Audio 95 * 8 -> 48 RTC 96 * 9 -> 49 Keyboard 97 * 10 -> X Keyboard polled 98 * 11 -> 51 Mouse 99 * 12 -> X Mouse polled 100 * 13-15 -> 53-55 Count/compare timers 101 * 16-19 -> 56-59 Parallel (16 E) 102 * 20-25 -> 60-62 Serial 1 (22 E) 103 * 26-31 -> 66-71 Serial 2 (28 E) 104 * 105 * Note that this means IRQs 12-14, 50, and 52 do not exist. This is a 106 * different IRQ map than IRIX uses, but that's OK as Linux irq handling 107 * is quite different anyway. 108 */ 109 110 /* Some initial interrupts to set up */ 111 extern irqreturn_t crime_memerr_intr(int irq, void *dev_id); 112 extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id); 113 114 static struct irqaction memerr_irq = { 115 .handler = crime_memerr_intr, 116 .name = "CRIME memory error", 117 }; 118 119 static struct irqaction cpuerr_irq = { 120 .handler = crime_cpuerr_intr, 121 .name = "CRIME CPU error", 122 }; 123 124 /* 125 * This is for pure CRIME interrupts - ie not MACE. The advantage? 126 * We get to split the register in half and do faster lookups. 127 */ 128 129 static uint64_t crime_mask; 130 131 static inline void crime_enable_irq(struct irq_data *d) 132 { 133 unsigned int bit = d->irq - CRIME_IRQ_BASE; 134 135 crime_mask |= 1 << bit; 136 crime->imask = crime_mask; 137 } 138 139 static inline void crime_disable_irq(struct irq_data *d) 140 { 141 unsigned int bit = d->irq - CRIME_IRQ_BASE; 142 143 crime_mask &= ~(1 << bit); 144 crime->imask = crime_mask; 145 flush_crime_bus(); 146 } 147 148 static struct irq_chip crime_level_interrupt = { 149 .name = "IP32 CRIME", 150 .irq_mask = crime_disable_irq, 151 .irq_unmask = crime_enable_irq, 152 }; 153 154 static void crime_edge_mask_and_ack_irq(struct irq_data *d) 155 { 156 unsigned int bit = d->irq - CRIME_IRQ_BASE; 157 uint64_t crime_int; 158 159 /* Edge triggered interrupts must be cleared. */ 160 crime_int = crime->hard_int; 161 crime_int &= ~(1 << bit); 162 crime->hard_int = crime_int; 163 164 crime_disable_irq(d); 165 } 166 167 static struct irq_chip crime_edge_interrupt = { 168 .name = "IP32 CRIME", 169 .irq_ack = crime_edge_mask_and_ack_irq, 170 .irq_mask = crime_disable_irq, 171 .irq_mask_ack = crime_edge_mask_and_ack_irq, 172 .irq_unmask = crime_enable_irq, 173 }; 174 175 /* 176 * This is for MACE PCI interrupts. We can decrease bus traffic by masking 177 * as close to the source as possible. This also means we can take the 178 * next chunk of the CRIME register in one piece. 179 */ 180 181 static unsigned long macepci_mask; 182 183 static void enable_macepci_irq(struct irq_data *d) 184 { 185 macepci_mask |= MACEPCI_CONTROL_INT(d->irq - MACEPCI_SCSI0_IRQ); 186 mace->pci.control = macepci_mask; 187 crime_mask |= 1 << (d->irq - CRIME_IRQ_BASE); 188 crime->imask = crime_mask; 189 } 190 191 static void disable_macepci_irq(struct irq_data *d) 192 { 193 crime_mask &= ~(1 << (d->irq - CRIME_IRQ_BASE)); 194 crime->imask = crime_mask; 195 flush_crime_bus(); 196 macepci_mask &= ~MACEPCI_CONTROL_INT(d->irq - MACEPCI_SCSI0_IRQ); 197 mace->pci.control = macepci_mask; 198 flush_mace_bus(); 199 } 200 201 static struct irq_chip ip32_macepci_interrupt = { 202 .name = "IP32 MACE PCI", 203 .irq_mask = disable_macepci_irq, 204 .irq_unmask = enable_macepci_irq, 205 }; 206 207 /* This is used for MACE ISA interrupts. That means bits 4-6 in the 208 * CRIME register. 209 */ 210 211 #define MACEISA_AUDIO_INT (MACEISA_AUDIO_SW_INT | \ 212 MACEISA_AUDIO_SC_INT | \ 213 MACEISA_AUDIO1_DMAT_INT | \ 214 MACEISA_AUDIO1_OF_INT | \ 215 MACEISA_AUDIO2_DMAT_INT | \ 216 MACEISA_AUDIO2_MERR_INT | \ 217 MACEISA_AUDIO3_DMAT_INT | \ 218 MACEISA_AUDIO3_MERR_INT) 219 #define MACEISA_MISC_INT (MACEISA_RTC_INT | \ 220 MACEISA_KEYB_INT | \ 221 MACEISA_KEYB_POLL_INT | \ 222 MACEISA_MOUSE_INT | \ 223 MACEISA_MOUSE_POLL_INT | \ 224 MACEISA_TIMER0_INT | \ 225 MACEISA_TIMER1_INT | \ 226 MACEISA_TIMER2_INT) 227 #define MACEISA_SUPERIO_INT (MACEISA_PARALLEL_INT | \ 228 MACEISA_PAR_CTXA_INT | \ 229 MACEISA_PAR_CTXB_INT | \ 230 MACEISA_PAR_MERR_INT | \ 231 MACEISA_SERIAL1_INT | \ 232 MACEISA_SERIAL1_TDMAT_INT | \ 233 MACEISA_SERIAL1_TDMAPR_INT | \ 234 MACEISA_SERIAL1_TDMAME_INT | \ 235 MACEISA_SERIAL1_RDMAT_INT | \ 236 MACEISA_SERIAL1_RDMAOR_INT | \ 237 MACEISA_SERIAL2_INT | \ 238 MACEISA_SERIAL2_TDMAT_INT | \ 239 MACEISA_SERIAL2_TDMAPR_INT | \ 240 MACEISA_SERIAL2_TDMAME_INT | \ 241 MACEISA_SERIAL2_RDMAT_INT | \ 242 MACEISA_SERIAL2_RDMAOR_INT) 243 244 static unsigned long maceisa_mask; 245 246 static void enable_maceisa_irq(struct irq_data *d) 247 { 248 unsigned int crime_int = 0; 249 250 pr_debug("maceisa enable: %u\n", d->irq); 251 252 switch (d->irq) { 253 case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ: 254 crime_int = MACE_AUDIO_INT; 255 break; 256 case MACEISA_RTC_IRQ ... MACEISA_TIMER2_IRQ: 257 crime_int = MACE_MISC_INT; 258 break; 259 case MACEISA_PARALLEL_IRQ ... MACEISA_SERIAL2_RDMAOR_IRQ: 260 crime_int = MACE_SUPERIO_INT; 261 break; 262 } 263 pr_debug("crime_int %08x enabled\n", crime_int); 264 crime_mask |= crime_int; 265 crime->imask = crime_mask; 266 maceisa_mask |= 1 << (d->irq - MACEISA_AUDIO_SW_IRQ); 267 mace->perif.ctrl.imask = maceisa_mask; 268 } 269 270 static void disable_maceisa_irq(struct irq_data *d) 271 { 272 unsigned int crime_int = 0; 273 274 maceisa_mask &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ)); 275 if (!(maceisa_mask & MACEISA_AUDIO_INT)) 276 crime_int |= MACE_AUDIO_INT; 277 if (!(maceisa_mask & MACEISA_MISC_INT)) 278 crime_int |= MACE_MISC_INT; 279 if (!(maceisa_mask & MACEISA_SUPERIO_INT)) 280 crime_int |= MACE_SUPERIO_INT; 281 crime_mask &= ~crime_int; 282 crime->imask = crime_mask; 283 flush_crime_bus(); 284 mace->perif.ctrl.imask = maceisa_mask; 285 flush_mace_bus(); 286 } 287 288 static void mask_and_ack_maceisa_irq(struct irq_data *d) 289 { 290 unsigned long mace_int; 291 292 /* edge triggered */ 293 mace_int = mace->perif.ctrl.istat; 294 mace_int &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ)); 295 mace->perif.ctrl.istat = mace_int; 296 297 disable_maceisa_irq(d); 298 } 299 300 static struct irq_chip ip32_maceisa_level_interrupt = { 301 .name = "IP32 MACE ISA", 302 .irq_mask = disable_maceisa_irq, 303 .irq_unmask = enable_maceisa_irq, 304 }; 305 306 static struct irq_chip ip32_maceisa_edge_interrupt = { 307 .name = "IP32 MACE ISA", 308 .irq_ack = mask_and_ack_maceisa_irq, 309 .irq_mask = disable_maceisa_irq, 310 .irq_mask_ack = mask_and_ack_maceisa_irq, 311 .irq_unmask = enable_maceisa_irq, 312 }; 313 314 /* This is used for regular non-ISA, non-PCI MACE interrupts. That means 315 * bits 0-3 and 7 in the CRIME register. 316 */ 317 318 static void enable_mace_irq(struct irq_data *d) 319 { 320 unsigned int bit = d->irq - CRIME_IRQ_BASE; 321 322 crime_mask |= (1 << bit); 323 crime->imask = crime_mask; 324 } 325 326 static void disable_mace_irq(struct irq_data *d) 327 { 328 unsigned int bit = d->irq - CRIME_IRQ_BASE; 329 330 crime_mask &= ~(1 << bit); 331 crime->imask = crime_mask; 332 flush_crime_bus(); 333 } 334 335 static struct irq_chip ip32_mace_interrupt = { 336 .name = "IP32 MACE", 337 .irq_mask = disable_mace_irq, 338 .irq_unmask = enable_mace_irq, 339 }; 340 341 static void ip32_unknown_interrupt(void) 342 { 343 printk("Unknown interrupt occurred!\n"); 344 printk("cp0_status: %08x\n", read_c0_status()); 345 printk("cp0_cause: %08x\n", read_c0_cause()); 346 printk("CRIME intr mask: %016lx\n", crime->imask); 347 printk("CRIME intr status: %016lx\n", crime->istat); 348 printk("CRIME hardware intr register: %016lx\n", crime->hard_int); 349 printk("MACE ISA intr mask: %08lx\n", mace->perif.ctrl.imask); 350 printk("MACE ISA intr status: %08lx\n", mace->perif.ctrl.istat); 351 printk("MACE PCI control register: %08x\n", mace->pci.control); 352 353 printk("Register dump:\n"); 354 show_regs(get_irq_regs()); 355 356 printk("Please mail this report to linux-mips@linux-mips.org\n"); 357 printk("Spinning..."); 358 while(1) ; 359 } 360 361 /* CRIME 1.1 appears to deliver all interrupts to this one pin. */ 362 /* change this to loop over all edge-triggered irqs, exception masked out ones */ 363 static void ip32_irq0(void) 364 { 365 uint64_t crime_int; 366 int irq = 0; 367 368 /* 369 * Sanity check interrupt numbering enum. 370 * MACE got 32 interrupts and there are 32 MACE ISA interrupts daisy 371 * chained. 372 */ 373 BUILD_BUG_ON(CRIME_VICE_IRQ - MACE_VID_IN1_IRQ != 31); 374 BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31); 375 376 crime_int = crime->istat & crime_mask; 377 378 /* crime sometime delivers spurious interrupts, ignore them */ 379 if (unlikely(crime_int == 0)) 380 return; 381 382 irq = MACE_VID_IN1_IRQ + __ffs(crime_int); 383 384 if (crime_int & CRIME_MACEISA_INT_MASK) { 385 unsigned long mace_int = mace->perif.ctrl.istat; 386 irq = __ffs(mace_int & maceisa_mask) + MACEISA_AUDIO_SW_IRQ; 387 } 388 389 pr_debug("*irq %u*\n", irq); 390 do_IRQ(irq); 391 } 392 393 static void ip32_irq1(void) 394 { 395 ip32_unknown_interrupt(); 396 } 397 398 static void ip32_irq2(void) 399 { 400 ip32_unknown_interrupt(); 401 } 402 403 static void ip32_irq3(void) 404 { 405 ip32_unknown_interrupt(); 406 } 407 408 static void ip32_irq4(void) 409 { 410 ip32_unknown_interrupt(); 411 } 412 413 static void ip32_irq5(void) 414 { 415 do_IRQ(MIPS_CPU_IRQ_BASE + 7); 416 } 417 418 asmlinkage void plat_irq_dispatch(void) 419 { 420 unsigned int pending = read_c0_status() & read_c0_cause(); 421 422 if (likely(pending & IE_IRQ0)) 423 ip32_irq0(); 424 else if (unlikely(pending & IE_IRQ1)) 425 ip32_irq1(); 426 else if (unlikely(pending & IE_IRQ2)) 427 ip32_irq2(); 428 else if (unlikely(pending & IE_IRQ3)) 429 ip32_irq3(); 430 else if (unlikely(pending & IE_IRQ4)) 431 ip32_irq4(); 432 else if (likely(pending & IE_IRQ5)) 433 ip32_irq5(); 434 } 435 436 void __init arch_init_irq(void) 437 { 438 unsigned int irq; 439 440 /* Install our interrupt handler, then clear and disable all 441 * CRIME and MACE interrupts. */ 442 crime->imask = 0; 443 crime->hard_int = 0; 444 crime->soft_int = 0; 445 mace->perif.ctrl.istat = 0; 446 mace->perif.ctrl.imask = 0; 447 448 mips_cpu_irq_init(); 449 for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) { 450 switch (irq) { 451 case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ: 452 irq_set_chip_and_handler_name(irq, 453 &ip32_mace_interrupt, 454 handle_level_irq, 455 "level"); 456 break; 457 458 case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ: 459 irq_set_chip_and_handler_name(irq, 460 &ip32_macepci_interrupt, 461 handle_level_irq, 462 "level"); 463 break; 464 465 case CRIME_CPUERR_IRQ: 466 case CRIME_MEMERR_IRQ: 467 irq_set_chip_and_handler_name(irq, 468 &crime_level_interrupt, 469 handle_level_irq, 470 "level"); 471 break; 472 473 case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ: 474 case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ: 475 case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ: 476 case CRIME_VICE_IRQ: 477 irq_set_chip_and_handler_name(irq, 478 &crime_edge_interrupt, 479 handle_edge_irq, 480 "edge"); 481 break; 482 483 case MACEISA_PARALLEL_IRQ: 484 case MACEISA_SERIAL1_TDMAPR_IRQ: 485 case MACEISA_SERIAL2_TDMAPR_IRQ: 486 irq_set_chip_and_handler_name(irq, 487 &ip32_maceisa_edge_interrupt, 488 handle_edge_irq, 489 "edge"); 490 break; 491 492 default: 493 irq_set_chip_and_handler_name(irq, 494 &ip32_maceisa_level_interrupt, 495 handle_level_irq, 496 "level"); 497 break; 498 } 499 } 500 setup_irq(CRIME_MEMERR_IRQ, &memerr_irq); 501 setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq); 502 503 #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) 504 change_c0_status(ST0_IM, ALLINTS); 505 } 506