1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * SGI IP30 miscellaneous setup bits. 4 * 5 * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org> 6 * 2007 Joshua Kinard <kumba@gentoo.org> 7 * 2009 Johannes Dickgreber <tanzy@gmx.de> 8 */ 9 10 #include <linux/init.h> 11 #include <linux/io.h> 12 #include <linux/kernel.h> 13 #include <linux/types.h> 14 #include <linux/percpu.h> 15 #include <linux/memblock.h> 16 17 #include <asm/smp-ops.h> 18 #include <asm/sgialib.h> 19 #include <asm/time.h> 20 #include <asm/sgi/heart.h> 21 22 #include "ip30-common.h" 23 24 /* Structure of accessible HEART registers located in XKPHYS space. */ 25 struct ip30_heart_regs __iomem *heart_regs = HEART_XKPHYS_BASE; 26 27 /* 28 * ARCS will report up to the first 1GB of 29 * memory if queried. Anything beyond that 30 * is marked as reserved. 31 */ 32 #define IP30_MAX_PROM_MEMORY _AC(0x40000000, UL) 33 34 /* 35 * Memory in the Octane starts at 512MB 36 */ 37 #define IP30_MEMORY_BASE _AC(0x20000000, UL) 38 39 /* 40 * If using ARCS to probe for memory, then 41 * remaining memory will start at this offset. 42 */ 43 #define IP30_REAL_MEMORY_START (IP30_MEMORY_BASE + IP30_MAX_PROM_MEMORY) 44 45 #define MEM_SHIFT(x) ((x) >> 20) 46 47 static void __init ip30_mem_init(void) 48 { 49 unsigned long total_mem; 50 phys_addr_t addr; 51 phys_addr_t size; 52 u32 memcfg; 53 int i; 54 55 total_mem = 0; 56 for (i = 0; i < HEART_MEMORY_BANKS; i++) { 57 memcfg = __raw_readl(&heart_regs->mem_cfg.l[i]); 58 if (!(memcfg & HEART_MEMCFG_VALID)) 59 continue; 60 61 addr = memcfg & HEART_MEMCFG_ADDR_MASK; 62 addr <<= HEART_MEMCFG_UNIT_SHIFT; 63 addr += IP30_MEMORY_BASE; 64 size = memcfg & HEART_MEMCFG_SIZE_MASK; 65 size >>= HEART_MEMCFG_SIZE_SHIFT; 66 size += 1; 67 size <<= HEART_MEMCFG_UNIT_SHIFT; 68 69 total_mem += size; 70 71 if (addr >= IP30_REAL_MEMORY_START) 72 memblock_free(addr, size); 73 else if ((addr + size) > IP30_REAL_MEMORY_START) 74 memblock_free(IP30_REAL_MEMORY_START, 75 size - IP30_MAX_PROM_MEMORY); 76 } 77 pr_info("Detected %luMB of physical memory.\n", MEM_SHIFT(total_mem)); 78 } 79 80 /** 81 * ip30_cpu_time_init - platform time initialization. 82 */ 83 static void __init ip30_cpu_time_init(void) 84 { 85 int cpu = smp_processor_id(); 86 u64 heart_compare; 87 unsigned int start, end; 88 int time_diff; 89 90 heart_compare = (heart_read(&heart_regs->count) + 91 (HEART_CYCLES_PER_SEC / 10)); 92 start = read_c0_count(); 93 while ((heart_read(&heart_regs->count) - heart_compare) & 0x800000) 94 cpu_relax(); 95 96 end = read_c0_count(); 97 time_diff = (int)end - (int)start; 98 mips_hpt_frequency = time_diff * 10; 99 pr_info("IP30: CPU%d: %d MHz CPU detected.\n", cpu, 100 (mips_hpt_frequency * 2) / 1000000); 101 } 102 103 void __init ip30_per_cpu_init(void) 104 { 105 /* Disable all interrupts. */ 106 clear_c0_status(ST0_IM); 107 108 ip30_cpu_time_init(); 109 #ifdef CONFIG_SMP 110 ip30_install_ipi(); 111 #endif 112 113 enable_percpu_irq(IP30_HEART_L0_IRQ, IRQ_TYPE_NONE); 114 enable_percpu_irq(IP30_HEART_L1_IRQ, IRQ_TYPE_NONE); 115 enable_percpu_irq(IP30_HEART_L2_IRQ, IRQ_TYPE_NONE); 116 enable_percpu_irq(IP30_HEART_ERR_IRQ, IRQ_TYPE_NONE); 117 } 118 119 /** 120 * plat_mem_setup - despite the name, misc setup happens here. 121 */ 122 void __init plat_mem_setup(void) 123 { 124 ip30_mem_init(); 125 126 /* XXX: Hard lock on /sbin/init if this flag isn't specified. */ 127 prom_flags |= PROM_FLAG_DONT_FREE_TEMP; 128 129 #ifdef CONFIG_SMP 130 register_smp_ops(&ip30_smp_ops); 131 #else 132 ip30_per_cpu_init(); 133 #endif 134 135 ioport_resource.start = 0; 136 ioport_resource.end = ~0UL; 137 set_io_port_base(IO_BASE); 138 } 139