1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * ip22-berr.c: Bus error handling. 4 * 5 * Copyright (C) 2002, 2003 Ladislav Michl (ladis@linux-mips.org) 6 */ 7 8 #include <linux/init.h> 9 #include <linux/kernel.h> 10 #include <linux/sched/signal.h> 11 12 #include <asm/addrspace.h> 13 #include <asm/traps.h> 14 #include <asm/branch.h> 15 #include <asm/irq_regs.h> 16 #include <asm/sgi/mc.h> 17 #include <asm/sgi/hpc3.h> 18 #include <asm/sgi/ioc.h> 19 #include <asm/sgi/ip22.h> 20 21 22 static unsigned int cpu_err_stat; /* Status reg for CPU */ 23 static unsigned int gio_err_stat; /* Status reg for GIO */ 24 static unsigned int cpu_err_addr; /* Error address reg for CPU */ 25 static unsigned int gio_err_addr; /* Error address reg for GIO */ 26 static unsigned int extio_stat; 27 static unsigned int hpc3_berr_stat; /* Bus error interrupt status */ 28 29 static void save_and_clear_buserr(void) 30 { 31 /* save status registers */ 32 cpu_err_addr = sgimc->cerr; 33 cpu_err_stat = sgimc->cstat; 34 gio_err_addr = sgimc->gerr; 35 gio_err_stat = sgimc->gstat; 36 extio_stat = ip22_is_fullhouse() ? sgioc->extio : (sgint->errstat << 4); 37 hpc3_berr_stat = hpc3c0->bestat; 38 39 sgimc->cstat = sgimc->gstat = 0; 40 } 41 42 #define GIO_ERRMASK 0xff00 43 #define CPU_ERRMASK 0x3f00 44 45 static void print_buserr(void) 46 { 47 if (extio_stat & EXTIO_MC_BUSERR) 48 printk(KERN_ERR "MC Bus Error\n"); 49 if (extio_stat & EXTIO_HPC3_BUSERR) 50 printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n", 51 hpc3_berr_stat, 52 (hpc3_berr_stat & HPC3_BESTAT_PIDMASK) >> 53 HPC3_BESTAT_PIDSHIFT, 54 (hpc3_berr_stat & HPC3_BESTAT_CTYPE) ? "PIO" : "DMA", 55 hpc3_berr_stat & HPC3_BESTAT_BLMASK); 56 if (extio_stat & EXTIO_EISA_BUSERR) 57 printk(KERN_ERR "EISA Bus Error\n"); 58 if (cpu_err_stat & CPU_ERRMASK) 59 printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n", 60 cpu_err_stat, 61 cpu_err_stat & SGIMC_CSTAT_RD ? "RD " : "", 62 cpu_err_stat & SGIMC_CSTAT_PAR ? "PAR " : "", 63 cpu_err_stat & SGIMC_CSTAT_ADDR ? "ADDR " : "", 64 cpu_err_stat & SGIMC_CSTAT_SYSAD_PAR ? "SYSAD " : "", 65 cpu_err_stat & SGIMC_CSTAT_SYSCMD_PAR ? "SYSCMD " : "", 66 cpu_err_stat & SGIMC_CSTAT_BAD_DATA ? "BAD_DATA " : "", 67 cpu_err_addr); 68 if (gio_err_stat & GIO_ERRMASK) 69 printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n", 70 gio_err_stat, 71 gio_err_stat & SGIMC_GSTAT_RD ? "RD " : "", 72 gio_err_stat & SGIMC_GSTAT_WR ? "WR " : "", 73 gio_err_stat & SGIMC_GSTAT_TIME ? "TIME " : "", 74 gio_err_stat & SGIMC_GSTAT_PROM ? "PROM " : "", 75 gio_err_stat & SGIMC_GSTAT_ADDR ? "ADDR " : "", 76 gio_err_stat & SGIMC_GSTAT_BC ? "BC " : "", 77 gio_err_stat & SGIMC_GSTAT_PIO_RD ? "PIO_RD " : "", 78 gio_err_stat & SGIMC_GSTAT_PIO_WR ? "PIO_WR " : "", 79 gio_err_addr); 80 } 81 82 /* 83 * MC sends an interrupt whenever bus or parity errors occur. In addition, 84 * if the error happened during a CPU read, it also asserts the bus error 85 * pin on the R4K. Code in bus error handler save the MC bus error registers 86 * and then clear the interrupt when this happens. 87 */ 88 89 void ip22_be_interrupt(int irq) 90 { 91 const int field = 2 * sizeof(unsigned long); 92 struct pt_regs *regs = get_irq_regs(); 93 94 save_and_clear_buserr(); 95 print_buserr(); 96 printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n", 97 (regs->cp0_cause & 4) ? "Data" : "Instruction", 98 field, regs->cp0_epc, field, regs->regs[31]); 99 /* Assume it would be too dangerous to continue ... */ 100 die_if_kernel("Oops", regs); 101 force_sig(SIGBUS, current); 102 } 103 104 static int ip22_be_handler(struct pt_regs *regs, int is_fixup) 105 { 106 save_and_clear_buserr(); 107 if (is_fixup) 108 return MIPS_BE_FIXUP; 109 print_buserr(); 110 return MIPS_BE_FATAL; 111 } 112 113 void __init ip22_be_init(void) 114 { 115 board_be_handler = ip22_be_handler; 116 } 117