1 /* 2 * This program is free software; you can redistribute it and/or modify it 3 * under the terms of the GNU General Public License version 2 as published 4 * by the Free Software Foundation. 5 * 6 * Parts of this file are based on Ralink's 2.6.21 BSP 7 * 8 * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> 9 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> 10 * Copyright (C) 2013 John Crispin <blogic@openwrt.org> 11 */ 12 13 #include <linux/kernel.h> 14 #include <linux/init.h> 15 #include <linux/module.h> 16 17 #include <asm/mipsregs.h> 18 #include <asm/mach-ralink/ralink_regs.h> 19 #include <asm/mach-ralink/rt288x.h> 20 #include <asm/mach-ralink/pinmux.h> 21 22 #include "common.h" 23 24 static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; 25 static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; 26 static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) }; 27 static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) }; 28 static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; 29 static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) }; 30 static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) }; 31 32 static struct rt2880_pmx_group rt2880_pinmux_data_act[] = { 33 GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C), 34 GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI), 35 GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0), 36 GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG), 37 GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO), 38 GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM), 39 GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI), 40 { 0 } 41 }; 42 43 static void rt288x_wdt_reset(void) 44 { 45 u32 t; 46 47 /* enable WDT reset output on pin SRAM_CS_N */ 48 t = rt_sysc_r32(SYSC_REG_CLKCFG); 49 t |= CLKCFG_SRAM_CS_N_WDT; 50 rt_sysc_w32(t, SYSC_REG_CLKCFG); 51 } 52 53 void __init ralink_clk_init(void) 54 { 55 unsigned long cpu_rate, wmac_rate = 40000000; 56 u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); 57 t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); 58 59 switch (t) { 60 case SYSTEM_CONFIG_CPUCLK_250: 61 cpu_rate = 250000000; 62 break; 63 case SYSTEM_CONFIG_CPUCLK_266: 64 cpu_rate = 266666667; 65 break; 66 case SYSTEM_CONFIG_CPUCLK_280: 67 cpu_rate = 280000000; 68 break; 69 case SYSTEM_CONFIG_CPUCLK_300: 70 cpu_rate = 300000000; 71 break; 72 } 73 74 ralink_clk_add("cpu", cpu_rate); 75 ralink_clk_add("300100.timer", cpu_rate / 2); 76 ralink_clk_add("300120.watchdog", cpu_rate / 2); 77 ralink_clk_add("300500.uart", cpu_rate / 2); 78 ralink_clk_add("300c00.uartlite", cpu_rate / 2); 79 ralink_clk_add("400000.ethernet", cpu_rate / 2); 80 ralink_clk_add("480000.wmac", wmac_rate); 81 } 82 83 void __init ralink_of_remap(void) 84 { 85 rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc"); 86 rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc"); 87 88 if (!rt_sysc_membase || !rt_memc_membase) 89 panic("Failed to remap core resources"); 90 } 91 92 void prom_soc_init(struct ralink_soc_info *soc_info) 93 { 94 void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); 95 const char *name; 96 u32 n0; 97 u32 n1; 98 u32 id; 99 100 n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); 101 n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); 102 id = __raw_readl(sysc + SYSC_REG_CHIP_ID); 103 104 if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) { 105 soc_info->compatible = "ralink,r2880-soc"; 106 name = "RT2880"; 107 } else { 108 panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1); 109 } 110 111 snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, 112 "Ralink %s id:%u rev:%u", 113 name, 114 (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, 115 (id & CHIP_ID_REV_MASK)); 116 117 soc_info->mem_base = RT2880_SDRAM_BASE; 118 soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; 119 soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; 120 121 rt2880_pinmux_data = rt2880_pinmux_data_act; 122 } 123