xref: /linux/arch/mips/loongson64/init.c (revision 9c93c0b44be36fd5267fb79ae33453f989fbe909)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2009 Lemote Inc.
4  * Author: Wu Zhangjin, wuzhangjin@gmail.com
5  */
6 
7 #include <linux/irqchip.h>
8 #include <linux/logic_pio.h>
9 #include <linux/memblock.h>
10 #include <linux/of.h>
11 #include <linux/of_address.h>
12 #include <asm/bootinfo.h>
13 #include <asm/traps.h>
14 #include <asm/smp-ops.h>
15 #include <asm/cacheflush.h>
16 #include <asm/fw/fw.h>
17 
18 #include <loongson.h>
19 #include <boot_param.h>
20 
21 #define NODE_ID_OFFSET_ADDR	((void __iomem *)TO_UNCAC(0x1001041c))
22 
23 u32 node_id_offset;
24 
25 static void __init mips_nmi_setup(void)
26 {
27 	void *base;
28 
29 	base = (void *)(CAC_BASE + 0x380);
30 	memcpy(base, except_vec_nmi, 0x80);
31 	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
32 }
33 
34 void ls7a_early_config(void)
35 {
36 	node_id_offset = ((readl(NODE_ID_OFFSET_ADDR) >> 8) & 0x1f) + 36;
37 }
38 
39 void rs780e_early_config(void)
40 {
41 	node_id_offset = 37;
42 }
43 
44 void virtual_early_config(void)
45 {
46 	node_id_offset = 44;
47 }
48 
49 void __init szmem(unsigned int node)
50 {
51 	u32 i, mem_type;
52 	phys_addr_t node_id, mem_start, mem_size;
53 
54 	/* Otherwise come from DTB */
55 	if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
56 		return;
57 
58 	/* Parse memory information and activate */
59 	for (i = 0; i < loongson_memmap->nr_map; i++) {
60 		node_id = loongson_memmap->map[i].node_id;
61 		if (node_id != node)
62 			continue;
63 
64 		mem_type = loongson_memmap->map[i].mem_type;
65 		mem_size = loongson_memmap->map[i].mem_size;
66 
67 		/* Memory size comes in MB if MEM_SIZE_IS_IN_BYTES not set */
68 		if (mem_size & MEM_SIZE_IS_IN_BYTES)
69 			mem_size &= ~MEM_SIZE_IS_IN_BYTES;
70 		else
71 			mem_size = mem_size << 20;
72 
73 		mem_start = (node_id << 44) | loongson_memmap->map[i].mem_start;
74 
75 		switch (mem_type) {
76 		case SYSTEM_RAM_LOW:
77 		case SYSTEM_RAM_HIGH:
78 		case UMA_VIDEO_RAM:
79 			pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes usable\n",
80 				(u32)node_id, mem_type, &mem_start, &mem_size);
81 			memblock_add_node(mem_start, mem_size, node,
82 					  MEMBLOCK_NONE);
83 			break;
84 		case SYSTEM_RAM_RESERVED:
85 		case VIDEO_ROM:
86 		case ADAPTER_ROM:
87 		case ACPI_TABLE:
88 		case SMBIOS_TABLE:
89 			pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes reserved\n",
90 				(u32)node_id, mem_type, &mem_start, &mem_size);
91 			memblock_reserve(mem_start, mem_size);
92 			break;
93 		/* We should not reserve VUMA_VIDEO_RAM as it overlaps with MMIO */
94 		case VUMA_VIDEO_RAM:
95 		default:
96 			pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes unhandled\n",
97 				(u32)node_id, mem_type, &mem_start, &mem_size);
98 			break;
99 		}
100 	}
101 
102 	/* Reserve vgabios if it comes from firmware */
103 	if (loongson_sysconf.vgabios_addr)
104 		memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr),
105 				SZ_256K);
106 	/* set nid for reserved memory */
107 	memblock_set_node((u64)node << 44, (u64)(node + 1) << 44,
108 			&memblock.reserved, node);
109 }
110 
111 #ifndef CONFIG_NUMA
112 static void __init prom_init_memory(void)
113 {
114 	szmem(0);
115 }
116 #endif
117 
118 void __init prom_init(void)
119 {
120 	fw_init_cmdline();
121 
122 	if (fw_arg2 == 0 || (fdt_magic(fw_arg2) == FDT_MAGIC)) {
123 		loongson_sysconf.fw_interface = LOONGSON_DTB;
124 		prom_dtb_init_env();
125 	} else {
126 		loongson_sysconf.fw_interface = LOONGSON_LEFI;
127 		prom_lefi_init_env();
128 	}
129 
130 	/* init base address of io space */
131 	set_io_port_base(PCI_IOBASE);
132 
133 	if (loongson_sysconf.early_config)
134 		loongson_sysconf.early_config();
135 
136 #ifdef CONFIG_NUMA
137 	prom_init_numa_memory();
138 #else
139 	prom_init_memory();
140 #endif
141 
142 	/* Hardcode to CPU UART 0 */
143 	if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
144 		setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE), 0, 1024);
145 	else
146 		setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024);
147 
148 	register_smp_ops(&loongson3_smp_ops);
149 	board_nmi_handler_setup = mips_nmi_setup;
150 }
151 
152 static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_t hw_start,
153 				    resource_size_t size)
154 {
155 	int ret = 0;
156 	struct logic_pio_hwaddr *range;
157 	unsigned long vaddr;
158 
159 	range = kzalloc(sizeof(*range), GFP_ATOMIC);
160 	if (!range)
161 		return -ENOMEM;
162 
163 	range->fwnode = fwnode;
164 	range->size = size = round_up(size, PAGE_SIZE);
165 	range->hw_start = hw_start;
166 	range->flags = LOGIC_PIO_CPU_MMIO;
167 
168 	ret = logic_pio_register_range(range);
169 	if (ret) {
170 		kfree(range);
171 		return ret;
172 	}
173 
174 	/* Legacy ISA must placed at the start of PCI_IOBASE */
175 	if (range->io_start != 0) {
176 		logic_pio_unregister_range(range);
177 		kfree(range);
178 		return -EINVAL;
179 	}
180 
181 	vaddr = PCI_IOBASE + range->io_start;
182 
183 	vmap_page_range(vaddr, vaddr + size, hw_start, pgprot_device(PAGE_KERNEL));
184 
185 	return 0;
186 }
187 
188 static __init void reserve_pio_range(void)
189 {
190 	struct device_node *np;
191 
192 	for_each_node_by_name(np, "isa") {
193 		struct of_range range;
194 		struct of_range_parser parser;
195 
196 		pr_info("ISA Bridge: %pOF\n", np);
197 
198 		if (of_range_parser_init(&parser, np)) {
199 			pr_info("Failed to parse resources.\n");
200 			of_node_put(np);
201 			break;
202 		}
203 
204 		for_each_of_range(&parser, &range) {
205 			switch (range.flags & IORESOURCE_TYPE_BITS) {
206 			case IORESOURCE_IO:
207 				pr_info(" IO 0x%016llx..0x%016llx  ->  0x%016llx\n",
208 					range.cpu_addr,
209 					range.cpu_addr + range.size - 1,
210 					range.bus_addr);
211 				if (add_legacy_isa_io(&np->fwnode, range.cpu_addr, range.size))
212 					pr_warn("Failed to reserve legacy IO in Logic PIO\n");
213 				break;
214 			case IORESOURCE_MEM:
215 				pr_info(" MEM 0x%016llx..0x%016llx  ->  0x%016llx\n",
216 					range.cpu_addr,
217 					range.cpu_addr + range.size - 1,
218 					range.bus_addr);
219 				break;
220 			}
221 		}
222 	}
223 }
224 
225 void __init arch_init_irq(void)
226 {
227 	reserve_pio_range();
228 	irqchip_init();
229 }
230