xref: /linux/arch/mips/kernel/unaligned.c (revision 3d277b177918cd26215732fc23af0783ab4b37dd)
1 /*
2  * Handle unaligned accesses by emulation.
3  *
4  * This file is subject to the terms and conditions of the GNU General Public
5  * License.  See the file "COPYING" in the main directory of this archive
6  * for more details.
7  *
8  * Copyright (C) 1996, 1998, 1999, 2002 by Ralf Baechle
9  * Copyright (C) 1999 Silicon Graphics, Inc.
10  * Copyright (C) 2014 Imagination Technologies Ltd.
11  *
12  * This file contains exception handler for address error exception with the
13  * special capability to execute faulting instructions in software.  The
14  * handler does not try to handle the case when the program counter points
15  * to an address not aligned to a word boundary.
16  *
17  * Putting data to unaligned addresses is a bad practice even on Intel where
18  * only the performance is affected.  Much worse is that such code is non-
19  * portable.  Due to several programs that die on MIPS due to alignment
20  * problems I decided to implement this handler anyway though I originally
21  * didn't intend to do this at all for user code.
22  *
23  * For now I enable fixing of address errors by default to make life easier.
24  * I however intend to disable this somewhen in the future when the alignment
25  * problems with user programs have been fixed.	 For programmers this is the
26  * right way to go.
27  *
28  * Fixing address errors is a per process option.  The option is inherited
29  * across fork(2) and execve(2) calls.	If you really want to use the
30  * option in your user programs - I discourage the use of the software
31  * emulation strongly - use the following code in your userland stuff:
32  *
33  * #include <sys/sysmips.h>
34  *
35  * ...
36  * sysmips(MIPS_FIXADE, x);
37  * ...
38  *
39  * The argument x is 0 for disabling software emulation, enabled otherwise.
40  *
41  * Below a little program to play around with this feature.
42  *
43  * #include <stdio.h>
44  * #include <sys/sysmips.h>
45  *
46  * struct foo {
47  *	   unsigned char bar[8];
48  * };
49  *
50  * main(int argc, char *argv[])
51  * {
52  *	   struct foo x = {0, 1, 2, 3, 4, 5, 6, 7};
53  *	   unsigned int *p = (unsigned int *) (x.bar + 3);
54  *	   int i;
55  *
56  *	   if (argc > 1)
57  *		   sysmips(MIPS_FIXADE, atoi(argv[1]));
58  *
59  *	   printf("*p = %08lx\n", *p);
60  *
61  *	   *p = 0xdeadface;
62  *
63  *	   for(i = 0; i <= 7; i++)
64  *	   printf("%02x ", x.bar[i]);
65  *	   printf("\n");
66  * }
67  *
68  * Coprocessor loads are not supported; I think this case is unimportant
69  * in the practice.
70  *
71  * TODO: Handle ndc (attempted store to doubleword in uncached memory)
72  *	 exception for the R6000.
73  *	 A store crossing a page boundary might be executed only partially.
74  *	 Undo the partial store in this case.
75  */
76 #include <linux/context_tracking.h>
77 #include <linux/mm.h>
78 #include <linux/signal.h>
79 #include <linux/smp.h>
80 #include <linux/sched.h>
81 #include <linux/debugfs.h>
82 #include <linux/perf_event.h>
83 
84 #include <asm/asm.h>
85 #include <asm/branch.h>
86 #include <asm/byteorder.h>
87 #include <asm/cop2.h>
88 #include <asm/debug.h>
89 #include <asm/fpu.h>
90 #include <asm/fpu_emulator.h>
91 #include <asm/inst.h>
92 #include <asm/uaccess.h>
93 
94 #define STR(x)	__STR(x)
95 #define __STR(x)  #x
96 
97 enum {
98 	UNALIGNED_ACTION_QUIET,
99 	UNALIGNED_ACTION_SIGNAL,
100 	UNALIGNED_ACTION_SHOW,
101 };
102 #ifdef CONFIG_DEBUG_FS
103 static u32 unaligned_instructions;
104 static u32 unaligned_action;
105 #else
106 #define unaligned_action UNALIGNED_ACTION_QUIET
107 #endif
108 extern void show_registers(struct pt_regs *regs);
109 
110 #ifdef __BIG_ENDIAN
111 #define     _LoadHW(addr, value, res, type)  \
112 do {                                                        \
113 		__asm__ __volatile__ (".set\tnoat\n"        \
114 			"1:\t"type##_lb("%0", "0(%2)")"\n"  \
115 			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
116 			"sll\t%0, 0x8\n\t"                  \
117 			"or\t%0, $1\n\t"                    \
118 			"li\t%1, 0\n"                       \
119 			"3:\t.set\tat\n\t"                  \
120 			".insn\n\t"                         \
121 			".section\t.fixup,\"ax\"\n\t"       \
122 			"4:\tli\t%1, %3\n\t"                \
123 			"j\t3b\n\t"                         \
124 			".previous\n\t"                     \
125 			".section\t__ex_table,\"a\"\n\t"    \
126 			STR(PTR)"\t1b, 4b\n\t"              \
127 			STR(PTR)"\t2b, 4b\n\t"              \
128 			".previous"                         \
129 			: "=&r" (value), "=r" (res)         \
130 			: "r" (addr), "i" (-EFAULT));       \
131 } while(0)
132 
133 #ifndef CONFIG_CPU_MIPSR6
134 #define     _LoadW(addr, value, res, type)   \
135 do {                                                        \
136 		__asm__ __volatile__ (                      \
137 			"1:\t"type##_lwl("%0", "(%2)")"\n"   \
138 			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
139 			"li\t%1, 0\n"                       \
140 			"3:\n\t"                            \
141 			".insn\n\t"                         \
142 			".section\t.fixup,\"ax\"\n\t"       \
143 			"4:\tli\t%1, %3\n\t"                \
144 			"j\t3b\n\t"                         \
145 			".previous\n\t"                     \
146 			".section\t__ex_table,\"a\"\n\t"    \
147 			STR(PTR)"\t1b, 4b\n\t"              \
148 			STR(PTR)"\t2b, 4b\n\t"              \
149 			".previous"                         \
150 			: "=&r" (value), "=r" (res)         \
151 			: "r" (addr), "i" (-EFAULT));       \
152 } while(0)
153 
154 #else
155 /* MIPSR6 has no lwl instruction */
156 #define     _LoadW(addr, value, res, type) \
157 do {                                                        \
158 		__asm__ __volatile__ (			    \
159 			".set\tpush\n"			    \
160 			".set\tnoat\n\t"		    \
161 			"1:"type##_lb("%0", "0(%2)")"\n\t"  \
162 			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
163 			"sll\t%0, 0x8\n\t"		    \
164 			"or\t%0, $1\n\t"		    \
165 			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
166 			"sll\t%0, 0x8\n\t"		    \
167 			"or\t%0, $1\n\t"		    \
168 			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
169 			"sll\t%0, 0x8\n\t"		    \
170 			"or\t%0, $1\n\t"		    \
171 			"li\t%1, 0\n"			    \
172 			".set\tpop\n"			    \
173 			"10:\n\t"			    \
174 			".insn\n\t"			    \
175 			".section\t.fixup,\"ax\"\n\t"	    \
176 			"11:\tli\t%1, %3\n\t"		    \
177 			"j\t10b\n\t"			    \
178 			".previous\n\t"			    \
179 			".section\t__ex_table,\"a\"\n\t"    \
180 			STR(PTR)"\t1b, 11b\n\t"		    \
181 			STR(PTR)"\t2b, 11b\n\t"		    \
182 			STR(PTR)"\t3b, 11b\n\t"		    \
183 			STR(PTR)"\t4b, 11b\n\t"		    \
184 			".previous"			    \
185 			: "=&r" (value), "=r" (res)	    \
186 			: "r" (addr), "i" (-EFAULT));       \
187 } while(0)
188 
189 #endif /* CONFIG_CPU_MIPSR6 */
190 
191 #define     _LoadHWU(addr, value, res, type) \
192 do {                                                        \
193 		__asm__ __volatile__ (                      \
194 			".set\tnoat\n"                      \
195 			"1:\t"type##_lbu("%0", "0(%2)")"\n" \
196 			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
197 			"sll\t%0, 0x8\n\t"                  \
198 			"or\t%0, $1\n\t"                    \
199 			"li\t%1, 0\n"                       \
200 			"3:\n\t"                            \
201 			".insn\n\t"                         \
202 			".set\tat\n\t"                      \
203 			".section\t.fixup,\"ax\"\n\t"       \
204 			"4:\tli\t%1, %3\n\t"                \
205 			"j\t3b\n\t"                         \
206 			".previous\n\t"                     \
207 			".section\t__ex_table,\"a\"\n\t"    \
208 			STR(PTR)"\t1b, 4b\n\t"              \
209 			STR(PTR)"\t2b, 4b\n\t"              \
210 			".previous"                         \
211 			: "=&r" (value), "=r" (res)         \
212 			: "r" (addr), "i" (-EFAULT));       \
213 } while(0)
214 
215 #ifndef CONFIG_CPU_MIPSR6
216 #define     _LoadWU(addr, value, res, type)  \
217 do {                                                        \
218 		__asm__ __volatile__ (                      \
219 			"1:\t"type##_lwl("%0", "(%2)")"\n"  \
220 			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
221 			"dsll\t%0, %0, 32\n\t"              \
222 			"dsrl\t%0, %0, 32\n\t"              \
223 			"li\t%1, 0\n"                       \
224 			"3:\n\t"                            \
225 			".insn\n\t"                         \
226 			"\t.section\t.fixup,\"ax\"\n\t"     \
227 			"4:\tli\t%1, %3\n\t"                \
228 			"j\t3b\n\t"                         \
229 			".previous\n\t"                     \
230 			".section\t__ex_table,\"a\"\n\t"    \
231 			STR(PTR)"\t1b, 4b\n\t"              \
232 			STR(PTR)"\t2b, 4b\n\t"              \
233 			".previous"                         \
234 			: "=&r" (value), "=r" (res)         \
235 			: "r" (addr), "i" (-EFAULT));       \
236 } while(0)
237 
238 #define     _LoadDW(addr, value, res)  \
239 do {                                                        \
240 		__asm__ __volatile__ (                      \
241 			"1:\tldl\t%0, (%2)\n"               \
242 			"2:\tldr\t%0, 7(%2)\n\t"            \
243 			"li\t%1, 0\n"                       \
244 			"3:\n\t"                            \
245 			".insn\n\t"                         \
246 			"\t.section\t.fixup,\"ax\"\n\t"     \
247 			"4:\tli\t%1, %3\n\t"                \
248 			"j\t3b\n\t"                         \
249 			".previous\n\t"                     \
250 			".section\t__ex_table,\"a\"\n\t"    \
251 			STR(PTR)"\t1b, 4b\n\t"              \
252 			STR(PTR)"\t2b, 4b\n\t"              \
253 			".previous"                         \
254 			: "=&r" (value), "=r" (res)         \
255 			: "r" (addr), "i" (-EFAULT));       \
256 } while(0)
257 
258 #else
259 /* MIPSR6 has not lwl and ldl instructions */
260 #define	    _LoadWU(addr, value, res, type) \
261 do {                                                        \
262 		__asm__ __volatile__ (			    \
263 			".set\tpush\n\t"		    \
264 			".set\tnoat\n\t"		    \
265 			"1:"type##_lbu("%0", "0(%2)")"\n\t" \
266 			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
267 			"sll\t%0, 0x8\n\t"		    \
268 			"or\t%0, $1\n\t"		    \
269 			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
270 			"sll\t%0, 0x8\n\t"		    \
271 			"or\t%0, $1\n\t"		    \
272 			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
273 			"sll\t%0, 0x8\n\t"		    \
274 			"or\t%0, $1\n\t"		    \
275 			"li\t%1, 0\n"			    \
276 			".set\tpop\n"			    \
277 			"10:\n\t"			    \
278 			".insn\n\t"			    \
279 			".section\t.fixup,\"ax\"\n\t"	    \
280 			"11:\tli\t%1, %3\n\t"		    \
281 			"j\t10b\n\t"			    \
282 			".previous\n\t"			    \
283 			".section\t__ex_table,\"a\"\n\t"    \
284 			STR(PTR)"\t1b, 11b\n\t"		    \
285 			STR(PTR)"\t2b, 11b\n\t"		    \
286 			STR(PTR)"\t3b, 11b\n\t"		    \
287 			STR(PTR)"\t4b, 11b\n\t"		    \
288 			".previous"			    \
289 			: "=&r" (value), "=r" (res)	    \
290 			: "r" (addr), "i" (-EFAULT));       \
291 } while(0)
292 
293 #define     _LoadDW(addr, value, res)  \
294 do {                                                        \
295 		__asm__ __volatile__ (			    \
296 			".set\tpush\n\t"		    \
297 			".set\tnoat\n\t"		    \
298 			"1:lb\t%0, 0(%2)\n\t"    	    \
299 			"2:lbu\t $1, 1(%2)\n\t"   	    \
300 			"dsll\t%0, 0x8\n\t"		    \
301 			"or\t%0, $1\n\t"		    \
302 			"3:lbu\t$1, 2(%2)\n\t"   	    \
303 			"dsll\t%0, 0x8\n\t"		    \
304 			"or\t%0, $1\n\t"		    \
305 			"4:lbu\t$1, 3(%2)\n\t"   	    \
306 			"dsll\t%0, 0x8\n\t"		    \
307 			"or\t%0, $1\n\t"		    \
308 			"5:lbu\t$1, 4(%2)\n\t"   	    \
309 			"dsll\t%0, 0x8\n\t"		    \
310 			"or\t%0, $1\n\t"		    \
311 			"6:lbu\t$1, 5(%2)\n\t"   	    \
312 			"dsll\t%0, 0x8\n\t"		    \
313 			"or\t%0, $1\n\t"		    \
314 			"7:lbu\t$1, 6(%2)\n\t"   	    \
315 			"dsll\t%0, 0x8\n\t"		    \
316 			"or\t%0, $1\n\t"		    \
317 			"8:lbu\t$1, 7(%2)\n\t"   	    \
318 			"dsll\t%0, 0x8\n\t"		    \
319 			"or\t%0, $1\n\t"		    \
320 			"li\t%1, 0\n"			    \
321 			".set\tpop\n\t"			    \
322 			"10:\n\t"			    \
323 			".insn\n\t"			    \
324 			".section\t.fixup,\"ax\"\n\t"	    \
325 			"11:\tli\t%1, %3\n\t"		    \
326 			"j\t10b\n\t"			    \
327 			".previous\n\t"			    \
328 			".section\t__ex_table,\"a\"\n\t"    \
329 			STR(PTR)"\t1b, 11b\n\t"		    \
330 			STR(PTR)"\t2b, 11b\n\t"		    \
331 			STR(PTR)"\t3b, 11b\n\t"		    \
332 			STR(PTR)"\t4b, 11b\n\t"		    \
333 			STR(PTR)"\t5b, 11b\n\t"		    \
334 			STR(PTR)"\t6b, 11b\n\t"		    \
335 			STR(PTR)"\t7b, 11b\n\t"		    \
336 			STR(PTR)"\t8b, 11b\n\t"		    \
337 			".previous"			    \
338 			: "=&r" (value), "=r" (res)	    \
339 			: "r" (addr), "i" (-EFAULT));       \
340 } while(0)
341 
342 #endif /* CONFIG_CPU_MIPSR6 */
343 
344 
345 #define     _StoreHW(addr, value, res, type) \
346 do {                                                        \
347 		__asm__ __volatile__ (                      \
348 			".set\tnoat\n"                      \
349 			"1:\t"type##_sb("%1", "1(%2)")"\n"  \
350 			"srl\t$1, %1, 0x8\n"                \
351 			"2:\t"type##_sb("$1", "0(%2)")"\n"  \
352 			".set\tat\n\t"                      \
353 			"li\t%0, 0\n"                       \
354 			"3:\n\t"                            \
355 			".insn\n\t"                         \
356 			".section\t.fixup,\"ax\"\n\t"       \
357 			"4:\tli\t%0, %3\n\t"                \
358 			"j\t3b\n\t"                         \
359 			".previous\n\t"                     \
360 			".section\t__ex_table,\"a\"\n\t"    \
361 			STR(PTR)"\t1b, 4b\n\t"              \
362 			STR(PTR)"\t2b, 4b\n\t"              \
363 			".previous"                         \
364 			: "=r" (res)                        \
365 			: "r" (value), "r" (addr), "i" (-EFAULT));\
366 } while(0)
367 
368 #ifndef CONFIG_CPU_MIPSR6
369 #define     _StoreW(addr, value, res, type)  \
370 do {                                                        \
371 		__asm__ __volatile__ (                      \
372 			"1:\t"type##_swl("%1", "(%2)")"\n"  \
373 			"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
374 			"li\t%0, 0\n"                       \
375 			"3:\n\t"                            \
376 			".insn\n\t"                         \
377 			".section\t.fixup,\"ax\"\n\t"       \
378 			"4:\tli\t%0, %3\n\t"                \
379 			"j\t3b\n\t"                         \
380 			".previous\n\t"                     \
381 			".section\t__ex_table,\"a\"\n\t"    \
382 			STR(PTR)"\t1b, 4b\n\t"              \
383 			STR(PTR)"\t2b, 4b\n\t"              \
384 			".previous"                         \
385 		: "=r" (res)                                \
386 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
387 } while(0)
388 
389 #define     _StoreDW(addr, value, res) \
390 do {                                                        \
391 		__asm__ __volatile__ (                      \
392 			"1:\tsdl\t%1,(%2)\n"                \
393 			"2:\tsdr\t%1, 7(%2)\n\t"            \
394 			"li\t%0, 0\n"                       \
395 			"3:\n\t"                            \
396 			".insn\n\t"                         \
397 			".section\t.fixup,\"ax\"\n\t"       \
398 			"4:\tli\t%0, %3\n\t"                \
399 			"j\t3b\n\t"                         \
400 			".previous\n\t"                     \
401 			".section\t__ex_table,\"a\"\n\t"    \
402 			STR(PTR)"\t1b, 4b\n\t"              \
403 			STR(PTR)"\t2b, 4b\n\t"              \
404 			".previous"                         \
405 		: "=r" (res)                                \
406 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
407 } while(0)
408 
409 #else
410 /* MIPSR6 has no swl and sdl instructions */
411 #define     _StoreW(addr, value, res, type)  \
412 do {                                                        \
413 		__asm__ __volatile__ (                      \
414 			".set\tpush\n\t"		    \
415 			".set\tnoat\n\t"		    \
416 			"1:"type##_sb("%1", "3(%2)")"\n\t"  \
417 			"srl\t$1, %1, 0x8\n\t"		    \
418 			"2:"type##_sb("$1", "2(%2)")"\n\t"  \
419 			"srl\t$1, $1,  0x8\n\t"		    \
420 			"3:"type##_sb("$1", "1(%2)")"\n\t"  \
421 			"srl\t$1, $1, 0x8\n\t"		    \
422 			"4:"type##_sb("$1", "0(%2)")"\n\t"  \
423 			".set\tpop\n\t"			    \
424 			"li\t%0, 0\n"			    \
425 			"10:\n\t"			    \
426 			".insn\n\t"			    \
427 			".section\t.fixup,\"ax\"\n\t"	    \
428 			"11:\tli\t%0, %3\n\t"		    \
429 			"j\t10b\n\t"			    \
430 			".previous\n\t"			    \
431 			".section\t__ex_table,\"a\"\n\t"    \
432 			STR(PTR)"\t1b, 11b\n\t"		    \
433 			STR(PTR)"\t2b, 11b\n\t"		    \
434 			STR(PTR)"\t3b, 11b\n\t"		    \
435 			STR(PTR)"\t4b, 11b\n\t"		    \
436 			".previous"			    \
437 		: "=&r" (res)			    	    \
438 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
439 		: "memory");                                \
440 } while(0)
441 
442 #define     _StoreDW(addr, value, res) \
443 do {                                                        \
444 		__asm__ __volatile__ (                      \
445 			".set\tpush\n\t"		    \
446 			".set\tnoat\n\t"		    \
447 			"1:sb\t%1, 7(%2)\n\t"    	    \
448 			"dsrl\t$1, %1, 0x8\n\t"		    \
449 			"2:sb\t$1, 6(%2)\n\t"    	    \
450 			"dsrl\t$1, $1, 0x8\n\t"		    \
451 			"3:sb\t$1, 5(%2)\n\t"    	    \
452 			"dsrl\t$1, $1, 0x8\n\t"		    \
453 			"4:sb\t$1, 4(%2)\n\t"    	    \
454 			"dsrl\t$1, $1, 0x8\n\t"		    \
455 			"5:sb\t$1, 3(%2)\n\t"    	    \
456 			"dsrl\t$1, $1, 0x8\n\t"		    \
457 			"6:sb\t$1, 2(%2)\n\t"    	    \
458 			"dsrl\t$1, $1, 0x8\n\t"		    \
459 			"7:sb\t$1, 1(%2)\n\t"    	    \
460 			"dsrl\t$1, $1, 0x8\n\t"		    \
461 			"8:sb\t$1, 0(%2)\n\t"    	    \
462 			"dsrl\t$1, $1, 0x8\n\t"		    \
463 			".set\tpop\n\t"			    \
464 			"li\t%0, 0\n"			    \
465 			"10:\n\t"			    \
466 			".insn\n\t"			    \
467 			".section\t.fixup,\"ax\"\n\t"	    \
468 			"11:\tli\t%0, %3\n\t"		    \
469 			"j\t10b\n\t"			    \
470 			".previous\n\t"			    \
471 			".section\t__ex_table,\"a\"\n\t"    \
472 			STR(PTR)"\t1b, 11b\n\t"		    \
473 			STR(PTR)"\t2b, 11b\n\t"		    \
474 			STR(PTR)"\t3b, 11b\n\t"		    \
475 			STR(PTR)"\t4b, 11b\n\t"		    \
476 			STR(PTR)"\t5b, 11b\n\t"		    \
477 			STR(PTR)"\t6b, 11b\n\t"		    \
478 			STR(PTR)"\t7b, 11b\n\t"		    \
479 			STR(PTR)"\t8b, 11b\n\t"		    \
480 			".previous"			    \
481 		: "=&r" (res)			    	    \
482 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
483 		: "memory");                                \
484 } while(0)
485 
486 #endif /* CONFIG_CPU_MIPSR6 */
487 
488 #else /* __BIG_ENDIAN */
489 
490 #define     _LoadHW(addr, value, res, type)  \
491 do {                                                        \
492 		__asm__ __volatile__ (".set\tnoat\n"        \
493 			"1:\t"type##_lb("%0", "1(%2)")"\n"  \
494 			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
495 			"sll\t%0, 0x8\n\t"                  \
496 			"or\t%0, $1\n\t"                    \
497 			"li\t%1, 0\n"                       \
498 			"3:\t.set\tat\n\t"                  \
499 			".insn\n\t"                         \
500 			".section\t.fixup,\"ax\"\n\t"       \
501 			"4:\tli\t%1, %3\n\t"                \
502 			"j\t3b\n\t"                         \
503 			".previous\n\t"                     \
504 			".section\t__ex_table,\"a\"\n\t"    \
505 			STR(PTR)"\t1b, 4b\n\t"              \
506 			STR(PTR)"\t2b, 4b\n\t"              \
507 			".previous"                         \
508 			: "=&r" (value), "=r" (res)         \
509 			: "r" (addr), "i" (-EFAULT));       \
510 } while(0)
511 
512 #ifndef CONFIG_CPU_MIPSR6
513 #define     _LoadW(addr, value, res, type)   \
514 do {                                                        \
515 		__asm__ __volatile__ (                      \
516 			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
517 			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
518 			"li\t%1, 0\n"                       \
519 			"3:\n\t"                            \
520 			".insn\n\t"                         \
521 			".section\t.fixup,\"ax\"\n\t"       \
522 			"4:\tli\t%1, %3\n\t"                \
523 			"j\t3b\n\t"                         \
524 			".previous\n\t"                     \
525 			".section\t__ex_table,\"a\"\n\t"    \
526 			STR(PTR)"\t1b, 4b\n\t"              \
527 			STR(PTR)"\t2b, 4b\n\t"              \
528 			".previous"                         \
529 			: "=&r" (value), "=r" (res)         \
530 			: "r" (addr), "i" (-EFAULT));       \
531 } while(0)
532 
533 #else
534 /* MIPSR6 has no lwl instruction */
535 #define     _LoadW(addr, value, res, type) \
536 do {                                                        \
537 		__asm__ __volatile__ (			    \
538 			".set\tpush\n"			    \
539 			".set\tnoat\n\t"		    \
540 			"1:"type##_lb("%0", "3(%2)")"\n\t"  \
541 			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
542 			"sll\t%0, 0x8\n\t"		    \
543 			"or\t%0, $1\n\t"		    \
544 			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
545 			"sll\t%0, 0x8\n\t"		    \
546 			"or\t%0, $1\n\t"		    \
547 			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
548 			"sll\t%0, 0x8\n\t"		    \
549 			"or\t%0, $1\n\t"		    \
550 			"li\t%1, 0\n"			    \
551 			".set\tpop\n"			    \
552 			"10:\n\t"			    \
553 			".insn\n\t"			    \
554 			".section\t.fixup,\"ax\"\n\t"	    \
555 			"11:\tli\t%1, %3\n\t"		    \
556 			"j\t10b\n\t"			    \
557 			".previous\n\t"			    \
558 			".section\t__ex_table,\"a\"\n\t"    \
559 			STR(PTR)"\t1b, 11b\n\t"		    \
560 			STR(PTR)"\t2b, 11b\n\t"		    \
561 			STR(PTR)"\t3b, 11b\n\t"		    \
562 			STR(PTR)"\t4b, 11b\n\t"		    \
563 			".previous"			    \
564 			: "=&r" (value), "=r" (res)	    \
565 			: "r" (addr), "i" (-EFAULT));       \
566 } while(0)
567 
568 #endif /* CONFIG_CPU_MIPSR6 */
569 
570 
571 #define     _LoadHWU(addr, value, res, type) \
572 do {                                                        \
573 		__asm__ __volatile__ (                      \
574 			".set\tnoat\n"                      \
575 			"1:\t"type##_lbu("%0", "1(%2)")"\n" \
576 			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
577 			"sll\t%0, 0x8\n\t"                  \
578 			"or\t%0, $1\n\t"                    \
579 			"li\t%1, 0\n"                       \
580 			"3:\n\t"                            \
581 			".insn\n\t"                         \
582 			".set\tat\n\t"                      \
583 			".section\t.fixup,\"ax\"\n\t"       \
584 			"4:\tli\t%1, %3\n\t"                \
585 			"j\t3b\n\t"                         \
586 			".previous\n\t"                     \
587 			".section\t__ex_table,\"a\"\n\t"    \
588 			STR(PTR)"\t1b, 4b\n\t"              \
589 			STR(PTR)"\t2b, 4b\n\t"              \
590 			".previous"                         \
591 			: "=&r" (value), "=r" (res)         \
592 			: "r" (addr), "i" (-EFAULT));       \
593 } while(0)
594 
595 #ifndef CONFIG_CPU_MIPSR6
596 #define     _LoadWU(addr, value, res, type)  \
597 do {                                                        \
598 		__asm__ __volatile__ (                      \
599 			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
600 			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
601 			"dsll\t%0, %0, 32\n\t"              \
602 			"dsrl\t%0, %0, 32\n\t"              \
603 			"li\t%1, 0\n"                       \
604 			"3:\n\t"                            \
605 			".insn\n\t"                         \
606 			"\t.section\t.fixup,\"ax\"\n\t"     \
607 			"4:\tli\t%1, %3\n\t"                \
608 			"j\t3b\n\t"                         \
609 			".previous\n\t"                     \
610 			".section\t__ex_table,\"a\"\n\t"    \
611 			STR(PTR)"\t1b, 4b\n\t"              \
612 			STR(PTR)"\t2b, 4b\n\t"              \
613 			".previous"                         \
614 			: "=&r" (value), "=r" (res)         \
615 			: "r" (addr), "i" (-EFAULT));       \
616 } while(0)
617 
618 #define     _LoadDW(addr, value, res)  \
619 do {                                                        \
620 		__asm__ __volatile__ (                      \
621 			"1:\tldl\t%0, 7(%2)\n"              \
622 			"2:\tldr\t%0, (%2)\n\t"             \
623 			"li\t%1, 0\n"                       \
624 			"3:\n\t"                            \
625 			".insn\n\t"                         \
626 			"\t.section\t.fixup,\"ax\"\n\t"     \
627 			"4:\tli\t%1, %3\n\t"                \
628 			"j\t3b\n\t"                         \
629 			".previous\n\t"                     \
630 			".section\t__ex_table,\"a\"\n\t"    \
631 			STR(PTR)"\t1b, 4b\n\t"              \
632 			STR(PTR)"\t2b, 4b\n\t"              \
633 			".previous"                         \
634 			: "=&r" (value), "=r" (res)         \
635 			: "r" (addr), "i" (-EFAULT));       \
636 } while(0)
637 
638 #else
639 /* MIPSR6 has not lwl and ldl instructions */
640 #define	    _LoadWU(addr, value, res, type) \
641 do {                                                        \
642 		__asm__ __volatile__ (			    \
643 			".set\tpush\n\t"		    \
644 			".set\tnoat\n\t"		    \
645 			"1:"type##_lbu("%0", "3(%2)")"\n\t" \
646 			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
647 			"sll\t%0, 0x8\n\t"		    \
648 			"or\t%0, $1\n\t"		    \
649 			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
650 			"sll\t%0, 0x8\n\t"		    \
651 			"or\t%0, $1\n\t"		    \
652 			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
653 			"sll\t%0, 0x8\n\t"		    \
654 			"or\t%0, $1\n\t"		    \
655 			"li\t%1, 0\n"			    \
656 			".set\tpop\n"			    \
657 			"10:\n\t"			    \
658 			".insn\n\t"			    \
659 			".section\t.fixup,\"ax\"\n\t"	    \
660 			"11:\tli\t%1, %3\n\t"		    \
661 			"j\t10b\n\t"			    \
662 			".previous\n\t"			    \
663 			".section\t__ex_table,\"a\"\n\t"    \
664 			STR(PTR)"\t1b, 11b\n\t"		    \
665 			STR(PTR)"\t2b, 11b\n\t"		    \
666 			STR(PTR)"\t3b, 11b\n\t"		    \
667 			STR(PTR)"\t4b, 11b\n\t"		    \
668 			".previous"			    \
669 			: "=&r" (value), "=r" (res)	    \
670 			: "r" (addr), "i" (-EFAULT));       \
671 } while(0)
672 
673 #define     _LoadDW(addr, value, res)  \
674 do {                                                        \
675 		__asm__ __volatile__ (			    \
676 			".set\tpush\n\t"		    \
677 			".set\tnoat\n\t"		    \
678 			"1:lb\t%0, 7(%2)\n\t"    	    \
679 			"2:lbu\t$1, 6(%2)\n\t"   	    \
680 			"dsll\t%0, 0x8\n\t"		    \
681 			"or\t%0, $1\n\t"		    \
682 			"3:lbu\t$1, 5(%2)\n\t"   	    \
683 			"dsll\t%0, 0x8\n\t"		    \
684 			"or\t%0, $1\n\t"		    \
685 			"4:lbu\t$1, 4(%2)\n\t"   	    \
686 			"dsll\t%0, 0x8\n\t"		    \
687 			"or\t%0, $1\n\t"		    \
688 			"5:lbu\t$1, 3(%2)\n\t"   	    \
689 			"dsll\t%0, 0x8\n\t"		    \
690 			"or\t%0, $1\n\t"		    \
691 			"6:lbu\t$1, 2(%2)\n\t"   	    \
692 			"dsll\t%0, 0x8\n\t"		    \
693 			"or\t%0, $1\n\t"		    \
694 			"7:lbu\t$1, 1(%2)\n\t"   	    \
695 			"dsll\t%0, 0x8\n\t"		    \
696 			"or\t%0, $1\n\t"		    \
697 			"8:lbu\t$1, 0(%2)\n\t"   	    \
698 			"dsll\t%0, 0x8\n\t"		    \
699 			"or\t%0, $1\n\t"		    \
700 			"li\t%1, 0\n"			    \
701 			".set\tpop\n\t"			    \
702 			"10:\n\t"			    \
703 			".insn\n\t"			    \
704 			".section\t.fixup,\"ax\"\n\t"	    \
705 			"11:\tli\t%1, %3\n\t"		    \
706 			"j\t10b\n\t"			    \
707 			".previous\n\t"			    \
708 			".section\t__ex_table,\"a\"\n\t"    \
709 			STR(PTR)"\t1b, 11b\n\t"		    \
710 			STR(PTR)"\t2b, 11b\n\t"		    \
711 			STR(PTR)"\t3b, 11b\n\t"		    \
712 			STR(PTR)"\t4b, 11b\n\t"		    \
713 			STR(PTR)"\t5b, 11b\n\t"		    \
714 			STR(PTR)"\t6b, 11b\n\t"		    \
715 			STR(PTR)"\t7b, 11b\n\t"		    \
716 			STR(PTR)"\t8b, 11b\n\t"		    \
717 			".previous"			    \
718 			: "=&r" (value), "=r" (res)	    \
719 			: "r" (addr), "i" (-EFAULT));       \
720 } while(0)
721 #endif /* CONFIG_CPU_MIPSR6 */
722 
723 #define     _StoreHW(addr, value, res, type) \
724 do {                                                        \
725 		__asm__ __volatile__ (                      \
726 			".set\tnoat\n"                      \
727 			"1:\t"type##_sb("%1", "0(%2)")"\n"  \
728 			"srl\t$1,%1, 0x8\n"                 \
729 			"2:\t"type##_sb("$1", "1(%2)")"\n"  \
730 			".set\tat\n\t"                      \
731 			"li\t%0, 0\n"                       \
732 			"3:\n\t"                            \
733 			".insn\n\t"                         \
734 			".section\t.fixup,\"ax\"\n\t"       \
735 			"4:\tli\t%0, %3\n\t"                \
736 			"j\t3b\n\t"                         \
737 			".previous\n\t"                     \
738 			".section\t__ex_table,\"a\"\n\t"    \
739 			STR(PTR)"\t1b, 4b\n\t"              \
740 			STR(PTR)"\t2b, 4b\n\t"              \
741 			".previous"                         \
742 			: "=r" (res)                        \
743 			: "r" (value), "r" (addr), "i" (-EFAULT));\
744 } while(0)
745 
746 #ifndef CONFIG_CPU_MIPSR6
747 #define     _StoreW(addr, value, res, type)  \
748 do {                                                        \
749 		__asm__ __volatile__ (                      \
750 			"1:\t"type##_swl("%1", "3(%2)")"\n" \
751 			"2:\t"type##_swr("%1", "(%2)")"\n\t"\
752 			"li\t%0, 0\n"                       \
753 			"3:\n\t"                            \
754 			".insn\n\t"                         \
755 			".section\t.fixup,\"ax\"\n\t"       \
756 			"4:\tli\t%0, %3\n\t"                \
757 			"j\t3b\n\t"                         \
758 			".previous\n\t"                     \
759 			".section\t__ex_table,\"a\"\n\t"    \
760 			STR(PTR)"\t1b, 4b\n\t"              \
761 			STR(PTR)"\t2b, 4b\n\t"              \
762 			".previous"                         \
763 		: "=r" (res)                                \
764 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
765 } while(0)
766 
767 #define     _StoreDW(addr, value, res) \
768 do {                                                        \
769 		__asm__ __volatile__ (                      \
770 			"1:\tsdl\t%1, 7(%2)\n"              \
771 			"2:\tsdr\t%1, (%2)\n\t"             \
772 			"li\t%0, 0\n"                       \
773 			"3:\n\t"                            \
774 			".insn\n\t"                         \
775 			".section\t.fixup,\"ax\"\n\t"       \
776 			"4:\tli\t%0, %3\n\t"                \
777 			"j\t3b\n\t"                         \
778 			".previous\n\t"                     \
779 			".section\t__ex_table,\"a\"\n\t"    \
780 			STR(PTR)"\t1b, 4b\n\t"              \
781 			STR(PTR)"\t2b, 4b\n\t"              \
782 			".previous"                         \
783 		: "=r" (res)                                \
784 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
785 } while(0)
786 
787 #else
788 /* MIPSR6 has no swl and sdl instructions */
789 #define     _StoreW(addr, value, res, type)  \
790 do {                                                        \
791 		__asm__ __volatile__ (                      \
792 			".set\tpush\n\t"		    \
793 			".set\tnoat\n\t"		    \
794 			"1:"type##_sb("%1", "0(%2)")"\n\t"  \
795 			"srl\t$1, %1, 0x8\n\t"		    \
796 			"2:"type##_sb("$1", "1(%2)")"\n\t"  \
797 			"srl\t$1, $1,  0x8\n\t"		    \
798 			"3:"type##_sb("$1", "2(%2)")"\n\t"  \
799 			"srl\t$1, $1, 0x8\n\t"		    \
800 			"4:"type##_sb("$1", "3(%2)")"\n\t"  \
801 			".set\tpop\n\t"			    \
802 			"li\t%0, 0\n"			    \
803 			"10:\n\t"			    \
804 			".insn\n\t"			    \
805 			".section\t.fixup,\"ax\"\n\t"	    \
806 			"11:\tli\t%0, %3\n\t"		    \
807 			"j\t10b\n\t"			    \
808 			".previous\n\t"			    \
809 			".section\t__ex_table,\"a\"\n\t"    \
810 			STR(PTR)"\t1b, 11b\n\t"		    \
811 			STR(PTR)"\t2b, 11b\n\t"		    \
812 			STR(PTR)"\t3b, 11b\n\t"		    \
813 			STR(PTR)"\t4b, 11b\n\t"		    \
814 			".previous"			    \
815 		: "=&r" (res)			    	    \
816 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
817 		: "memory");                                \
818 } while(0)
819 
820 #define     _StoreDW(addr, value, res) \
821 do {                                                        \
822 		__asm__ __volatile__ (                      \
823 			".set\tpush\n\t"		    \
824 			".set\tnoat\n\t"		    \
825 			"1:sb\t%1, 0(%2)\n\t"    	    \
826 			"dsrl\t$1, %1, 0x8\n\t"		    \
827 			"2:sb\t$1, 1(%2)\n\t"    	    \
828 			"dsrl\t$1, $1, 0x8\n\t"		    \
829 			"3:sb\t$1, 2(%2)\n\t"    	    \
830 			"dsrl\t$1, $1, 0x8\n\t"		    \
831 			"4:sb\t$1, 3(%2)\n\t"    	    \
832 			"dsrl\t$1, $1, 0x8\n\t"		    \
833 			"5:sb\t$1, 4(%2)\n\t"    	    \
834 			"dsrl\t$1, $1, 0x8\n\t"		    \
835 			"6:sb\t$1, 5(%2)\n\t"    	    \
836 			"dsrl\t$1, $1, 0x8\n\t"		    \
837 			"7:sb\t$1, 6(%2)\n\t"    	    \
838 			"dsrl\t$1, $1, 0x8\n\t"		    \
839 			"8:sb\t$1, 7(%2)\n\t"    	    \
840 			"dsrl\t$1, $1, 0x8\n\t"		    \
841 			".set\tpop\n\t"			    \
842 			"li\t%0, 0\n"			    \
843 			"10:\n\t"			    \
844 			".insn\n\t"			    \
845 			".section\t.fixup,\"ax\"\n\t"	    \
846 			"11:\tli\t%0, %3\n\t"		    \
847 			"j\t10b\n\t"			    \
848 			".previous\n\t"			    \
849 			".section\t__ex_table,\"a\"\n\t"    \
850 			STR(PTR)"\t1b, 11b\n\t"		    \
851 			STR(PTR)"\t2b, 11b\n\t"		    \
852 			STR(PTR)"\t3b, 11b\n\t"		    \
853 			STR(PTR)"\t4b, 11b\n\t"		    \
854 			STR(PTR)"\t5b, 11b\n\t"		    \
855 			STR(PTR)"\t6b, 11b\n\t"		    \
856 			STR(PTR)"\t7b, 11b\n\t"		    \
857 			STR(PTR)"\t8b, 11b\n\t"		    \
858 			".previous"			    \
859 		: "=&r" (res)			    	    \
860 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
861 		: "memory");                                \
862 } while(0)
863 
864 #endif /* CONFIG_CPU_MIPSR6 */
865 #endif
866 
867 #define LoadHWU(addr, value, res)	_LoadHWU(addr, value, res, kernel)
868 #define LoadHWUE(addr, value, res)	_LoadHWU(addr, value, res, user)
869 #define LoadWU(addr, value, res)	_LoadWU(addr, value, res, kernel)
870 #define LoadWUE(addr, value, res)	_LoadWU(addr, value, res, user)
871 #define LoadHW(addr, value, res)	_LoadHW(addr, value, res, kernel)
872 #define LoadHWE(addr, value, res)	_LoadHW(addr, value, res, user)
873 #define LoadW(addr, value, res)		_LoadW(addr, value, res, kernel)
874 #define LoadWE(addr, value, res)	_LoadW(addr, value, res, user)
875 #define LoadDW(addr, value, res)	_LoadDW(addr, value, res)
876 
877 #define StoreHW(addr, value, res)	_StoreHW(addr, value, res, kernel)
878 #define StoreHWE(addr, value, res)	_StoreHW(addr, value, res, user)
879 #define StoreW(addr, value, res)	_StoreW(addr, value, res, kernel)
880 #define StoreWE(addr, value, res)	_StoreW(addr, value, res, user)
881 #define StoreDW(addr, value, res)	_StoreDW(addr, value, res)
882 
883 static void emulate_load_store_insn(struct pt_regs *regs,
884 	void __user *addr, unsigned int __user *pc)
885 {
886 	union mips_instruction insn;
887 	unsigned long value;
888 	unsigned int res, preempted;
889 	unsigned long origpc;
890 	unsigned long orig31;
891 	void __user *fault_addr = NULL;
892 #ifdef	CONFIG_EVA
893 	mm_segment_t seg;
894 #endif
895 	union fpureg *fpr;
896 	enum msa_2b_fmt df;
897 	unsigned int wd;
898 	origpc = (unsigned long)pc;
899 	orig31 = regs->regs[31];
900 
901 	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
902 
903 	/*
904 	 * This load never faults.
905 	 */
906 	__get_user(insn.word, pc);
907 
908 	switch (insn.i_format.opcode) {
909 		/*
910 		 * These are instructions that a compiler doesn't generate.  We
911 		 * can assume therefore that the code is MIPS-aware and
912 		 * really buggy.  Emulating these instructions would break the
913 		 * semantics anyway.
914 		 */
915 	case ll_op:
916 	case lld_op:
917 	case sc_op:
918 	case scd_op:
919 
920 		/*
921 		 * For these instructions the only way to create an address
922 		 * error is an attempted access to kernel/supervisor address
923 		 * space.
924 		 */
925 	case ldl_op:
926 	case ldr_op:
927 	case lwl_op:
928 	case lwr_op:
929 	case sdl_op:
930 	case sdr_op:
931 	case swl_op:
932 	case swr_op:
933 	case lb_op:
934 	case lbu_op:
935 	case sb_op:
936 		goto sigbus;
937 
938 		/*
939 		 * The remaining opcodes are the ones that are really of
940 		 * interest.
941 		 */
942 #ifdef CONFIG_EVA
943 	case spec3_op:
944 		/*
945 		 * we can land here only from kernel accessing user memory,
946 		 * so we need to "switch" the address limit to user space, so
947 		 * address check can work properly.
948 		 */
949 		seg = get_fs();
950 		set_fs(USER_DS);
951 		switch (insn.spec3_format.func) {
952 		case lhe_op:
953 			if (!access_ok(VERIFY_READ, addr, 2)) {
954 				set_fs(seg);
955 				goto sigbus;
956 			}
957 			LoadHWE(addr, value, res);
958 			if (res) {
959 				set_fs(seg);
960 				goto fault;
961 			}
962 			compute_return_epc(regs);
963 			regs->regs[insn.spec3_format.rt] = value;
964 			break;
965 		case lwe_op:
966 			if (!access_ok(VERIFY_READ, addr, 4)) {
967 				set_fs(seg);
968 				goto sigbus;
969 			}
970 				LoadWE(addr, value, res);
971 			if (res) {
972 				set_fs(seg);
973 				goto fault;
974 			}
975 			compute_return_epc(regs);
976 			regs->regs[insn.spec3_format.rt] = value;
977 			break;
978 		case lhue_op:
979 			if (!access_ok(VERIFY_READ, addr, 2)) {
980 				set_fs(seg);
981 				goto sigbus;
982 			}
983 			LoadHWUE(addr, value, res);
984 			if (res) {
985 				set_fs(seg);
986 				goto fault;
987 			}
988 			compute_return_epc(regs);
989 			regs->regs[insn.spec3_format.rt] = value;
990 			break;
991 		case she_op:
992 			if (!access_ok(VERIFY_WRITE, addr, 2)) {
993 				set_fs(seg);
994 				goto sigbus;
995 			}
996 			compute_return_epc(regs);
997 			value = regs->regs[insn.spec3_format.rt];
998 			StoreHWE(addr, value, res);
999 			if (res) {
1000 				set_fs(seg);
1001 				goto fault;
1002 			}
1003 			break;
1004 		case swe_op:
1005 			if (!access_ok(VERIFY_WRITE, addr, 4)) {
1006 				set_fs(seg);
1007 				goto sigbus;
1008 			}
1009 			compute_return_epc(regs);
1010 			value = regs->regs[insn.spec3_format.rt];
1011 			StoreWE(addr, value, res);
1012 			if (res) {
1013 				set_fs(seg);
1014 				goto fault;
1015 			}
1016 			break;
1017 		default:
1018 			set_fs(seg);
1019 			goto sigill;
1020 		}
1021 		set_fs(seg);
1022 		break;
1023 #endif
1024 	case lh_op:
1025 		if (!access_ok(VERIFY_READ, addr, 2))
1026 			goto sigbus;
1027 
1028 		if (config_enabled(CONFIG_EVA)) {
1029 			if (segment_eq(get_fs(), get_ds()))
1030 				LoadHW(addr, value, res);
1031 			else
1032 				LoadHWE(addr, value, res);
1033 		} else {
1034 			LoadHW(addr, value, res);
1035 		}
1036 
1037 		if (res)
1038 			goto fault;
1039 		compute_return_epc(regs);
1040 		regs->regs[insn.i_format.rt] = value;
1041 		break;
1042 
1043 	case lw_op:
1044 		if (!access_ok(VERIFY_READ, addr, 4))
1045 			goto sigbus;
1046 
1047 		if (config_enabled(CONFIG_EVA)) {
1048 			if (segment_eq(get_fs(), get_ds()))
1049 				LoadW(addr, value, res);
1050 			else
1051 				LoadWE(addr, value, res);
1052 		} else {
1053 			LoadW(addr, value, res);
1054 		}
1055 
1056 		if (res)
1057 			goto fault;
1058 		compute_return_epc(regs);
1059 		regs->regs[insn.i_format.rt] = value;
1060 		break;
1061 
1062 	case lhu_op:
1063 		if (!access_ok(VERIFY_READ, addr, 2))
1064 			goto sigbus;
1065 
1066 		if (config_enabled(CONFIG_EVA)) {
1067 			if (segment_eq(get_fs(), get_ds()))
1068 				LoadHWU(addr, value, res);
1069 			else
1070 				LoadHWUE(addr, value, res);
1071 		} else {
1072 			LoadHWU(addr, value, res);
1073 		}
1074 
1075 		if (res)
1076 			goto fault;
1077 		compute_return_epc(regs);
1078 		regs->regs[insn.i_format.rt] = value;
1079 		break;
1080 
1081 	case lwu_op:
1082 #ifdef CONFIG_64BIT
1083 		/*
1084 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1085 		 * if we're on a 32-bit processor and an i-cache incoherency
1086 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1087 		 * would blow up, so for now we don't handle unaligned 64-bit
1088 		 * instructions on 32-bit kernels.
1089 		 */
1090 		if (!access_ok(VERIFY_READ, addr, 4))
1091 			goto sigbus;
1092 
1093 		LoadWU(addr, value, res);
1094 		if (res)
1095 			goto fault;
1096 		compute_return_epc(regs);
1097 		regs->regs[insn.i_format.rt] = value;
1098 		break;
1099 #endif /* CONFIG_64BIT */
1100 
1101 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1102 		goto sigill;
1103 
1104 	case ld_op:
1105 #ifdef CONFIG_64BIT
1106 		/*
1107 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1108 		 * if we're on a 32-bit processor and an i-cache incoherency
1109 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1110 		 * would blow up, so for now we don't handle unaligned 64-bit
1111 		 * instructions on 32-bit kernels.
1112 		 */
1113 		if (!access_ok(VERIFY_READ, addr, 8))
1114 			goto sigbus;
1115 
1116 		LoadDW(addr, value, res);
1117 		if (res)
1118 			goto fault;
1119 		compute_return_epc(regs);
1120 		regs->regs[insn.i_format.rt] = value;
1121 		break;
1122 #endif /* CONFIG_64BIT */
1123 
1124 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1125 		goto sigill;
1126 
1127 	case sh_op:
1128 		if (!access_ok(VERIFY_WRITE, addr, 2))
1129 			goto sigbus;
1130 
1131 		compute_return_epc(regs);
1132 		value = regs->regs[insn.i_format.rt];
1133 
1134 		if (config_enabled(CONFIG_EVA)) {
1135 			if (segment_eq(get_fs(), get_ds()))
1136 				StoreHW(addr, value, res);
1137 			else
1138 				StoreHWE(addr, value, res);
1139 		} else {
1140 			StoreHW(addr, value, res);
1141 		}
1142 
1143 		if (res)
1144 			goto fault;
1145 		break;
1146 
1147 	case sw_op:
1148 		if (!access_ok(VERIFY_WRITE, addr, 4))
1149 			goto sigbus;
1150 
1151 		compute_return_epc(regs);
1152 		value = regs->regs[insn.i_format.rt];
1153 
1154 		if (config_enabled(CONFIG_EVA)) {
1155 			if (segment_eq(get_fs(), get_ds()))
1156 				StoreW(addr, value, res);
1157 			else
1158 				StoreWE(addr, value, res);
1159 		} else {
1160 			StoreW(addr, value, res);
1161 		}
1162 
1163 		if (res)
1164 			goto fault;
1165 		break;
1166 
1167 	case sd_op:
1168 #ifdef CONFIG_64BIT
1169 		/*
1170 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1171 		 * if we're on a 32-bit processor and an i-cache incoherency
1172 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1173 		 * would blow up, so for now we don't handle unaligned 64-bit
1174 		 * instructions on 32-bit kernels.
1175 		 */
1176 		if (!access_ok(VERIFY_WRITE, addr, 8))
1177 			goto sigbus;
1178 
1179 		compute_return_epc(regs);
1180 		value = regs->regs[insn.i_format.rt];
1181 		StoreDW(addr, value, res);
1182 		if (res)
1183 			goto fault;
1184 		break;
1185 #endif /* CONFIG_64BIT */
1186 
1187 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1188 		goto sigill;
1189 
1190 	case lwc1_op:
1191 	case ldc1_op:
1192 	case swc1_op:
1193 	case sdc1_op:
1194 		die_if_kernel("Unaligned FP access in kernel code", regs);
1195 		BUG_ON(!used_math());
1196 
1197 		lose_fpu(1);	/* Save FPU state for the emulator. */
1198 		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
1199 					       &fault_addr);
1200 		own_fpu(1);	/* Restore FPU state. */
1201 
1202 		/* Signal if something went wrong. */
1203 		process_fpemu_return(res, fault_addr, 0);
1204 
1205 		if (res == 0)
1206 			break;
1207 		return;
1208 
1209 	case msa_op:
1210 		if (!cpu_has_msa)
1211 			goto sigill;
1212 
1213 		/*
1214 		 * If we've reached this point then userland should have taken
1215 		 * the MSA disabled exception & initialised vector context at
1216 		 * some point in the past.
1217 		 */
1218 		BUG_ON(!thread_msa_context_live());
1219 
1220 		df = insn.msa_mi10_format.df;
1221 		wd = insn.msa_mi10_format.wd;
1222 		fpr = &current->thread.fpu.fpr[wd];
1223 
1224 		switch (insn.msa_mi10_format.func) {
1225 		case msa_ld_op:
1226 			if (!access_ok(VERIFY_READ, addr, sizeof(*fpr)))
1227 				goto sigbus;
1228 
1229 			do {
1230 				/*
1231 				 * If we have live MSA context keep track of
1232 				 * whether we get preempted in order to avoid
1233 				 * the register context we load being clobbered
1234 				 * by the live context as it's saved during
1235 				 * preemption. If we don't have live context
1236 				 * then it can't be saved to clobber the value
1237 				 * we load.
1238 				 */
1239 				preempted = test_thread_flag(TIF_USEDMSA);
1240 
1241 				res = __copy_from_user_inatomic(fpr, addr,
1242 								sizeof(*fpr));
1243 				if (res)
1244 					goto fault;
1245 
1246 				/*
1247 				 * Update the hardware register if it is in use
1248 				 * by the task in this quantum, in order to
1249 				 * avoid having to save & restore the whole
1250 				 * vector context.
1251 				 */
1252 				preempt_disable();
1253 				if (test_thread_flag(TIF_USEDMSA)) {
1254 					write_msa_wr(wd, fpr, df);
1255 					preempted = 0;
1256 				}
1257 				preempt_enable();
1258 			} while (preempted);
1259 			break;
1260 
1261 		case msa_st_op:
1262 			if (!access_ok(VERIFY_WRITE, addr, sizeof(*fpr)))
1263 				goto sigbus;
1264 
1265 			/*
1266 			 * Update from the hardware register if it is in use by
1267 			 * the task in this quantum, in order to avoid having to
1268 			 * save & restore the whole vector context.
1269 			 */
1270 			preempt_disable();
1271 			if (test_thread_flag(TIF_USEDMSA))
1272 				read_msa_wr(wd, fpr, df);
1273 			preempt_enable();
1274 
1275 			res = __copy_to_user_inatomic(addr, fpr, sizeof(*fpr));
1276 			if (res)
1277 				goto fault;
1278 			break;
1279 
1280 		default:
1281 			goto sigbus;
1282 		}
1283 
1284 		compute_return_epc(regs);
1285 		break;
1286 
1287 #ifndef CONFIG_CPU_MIPSR6
1288 	/*
1289 	 * COP2 is available to implementor for application specific use.
1290 	 * It's up to applications to register a notifier chain and do
1291 	 * whatever they have to do, including possible sending of signals.
1292 	 *
1293 	 * This instruction has been reallocated in Release 6
1294 	 */
1295 	case lwc2_op:
1296 		cu2_notifier_call_chain(CU2_LWC2_OP, regs);
1297 		break;
1298 
1299 	case ldc2_op:
1300 		cu2_notifier_call_chain(CU2_LDC2_OP, regs);
1301 		break;
1302 
1303 	case swc2_op:
1304 		cu2_notifier_call_chain(CU2_SWC2_OP, regs);
1305 		break;
1306 
1307 	case sdc2_op:
1308 		cu2_notifier_call_chain(CU2_SDC2_OP, regs);
1309 		break;
1310 #endif
1311 	default:
1312 		/*
1313 		 * Pheeee...  We encountered an yet unknown instruction or
1314 		 * cache coherence problem.  Die sucker, die ...
1315 		 */
1316 		goto sigill;
1317 	}
1318 
1319 #ifdef CONFIG_DEBUG_FS
1320 	unaligned_instructions++;
1321 #endif
1322 
1323 	return;
1324 
1325 fault:
1326 	/* roll back jump/branch */
1327 	regs->cp0_epc = origpc;
1328 	regs->regs[31] = orig31;
1329 	/* Did we have an exception handler installed? */
1330 	if (fixup_exception(regs))
1331 		return;
1332 
1333 	die_if_kernel("Unhandled kernel unaligned access", regs);
1334 	force_sig(SIGSEGV, current);
1335 
1336 	return;
1337 
1338 sigbus:
1339 	die_if_kernel("Unhandled kernel unaligned access", regs);
1340 	force_sig(SIGBUS, current);
1341 
1342 	return;
1343 
1344 sigill:
1345 	die_if_kernel
1346 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
1347 	force_sig(SIGILL, current);
1348 }
1349 
1350 /* Recode table from 16-bit register notation to 32-bit GPR. */
1351 const int reg16to32[] = { 16, 17, 2, 3, 4, 5, 6, 7 };
1352 
1353 /* Recode table from 16-bit STORE register notation to 32-bit GPR. */
1354 const int reg16to32st[] = { 0, 17, 2, 3, 4, 5, 6, 7 };
1355 
1356 static void emulate_load_store_microMIPS(struct pt_regs *regs,
1357 					 void __user *addr)
1358 {
1359 	unsigned long value;
1360 	unsigned int res;
1361 	int i;
1362 	unsigned int reg = 0, rvar;
1363 	unsigned long orig31;
1364 	u16 __user *pc16;
1365 	u16 halfword;
1366 	unsigned int word;
1367 	unsigned long origpc, contpc;
1368 	union mips_instruction insn;
1369 	struct mm_decoded_insn mminsn;
1370 	void __user *fault_addr = NULL;
1371 
1372 	origpc = regs->cp0_epc;
1373 	orig31 = regs->regs[31];
1374 
1375 	mminsn.micro_mips_mode = 1;
1376 
1377 	/*
1378 	 * This load never faults.
1379 	 */
1380 	pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc);
1381 	__get_user(halfword, pc16);
1382 	pc16++;
1383 	contpc = regs->cp0_epc + 2;
1384 	word = ((unsigned int)halfword << 16);
1385 	mminsn.pc_inc = 2;
1386 
1387 	if (!mm_insn_16bit(halfword)) {
1388 		__get_user(halfword, pc16);
1389 		pc16++;
1390 		contpc = regs->cp0_epc + 4;
1391 		mminsn.pc_inc = 4;
1392 		word |= halfword;
1393 	}
1394 	mminsn.insn = word;
1395 
1396 	if (get_user(halfword, pc16))
1397 		goto fault;
1398 	mminsn.next_pc_inc = 2;
1399 	word = ((unsigned int)halfword << 16);
1400 
1401 	if (!mm_insn_16bit(halfword)) {
1402 		pc16++;
1403 		if (get_user(halfword, pc16))
1404 			goto fault;
1405 		mminsn.next_pc_inc = 4;
1406 		word |= halfword;
1407 	}
1408 	mminsn.next_insn = word;
1409 
1410 	insn = (union mips_instruction)(mminsn.insn);
1411 	if (mm_isBranchInstr(regs, mminsn, &contpc))
1412 		insn = (union mips_instruction)(mminsn.next_insn);
1413 
1414 	/*  Parse instruction to find what to do */
1415 
1416 	switch (insn.mm_i_format.opcode) {
1417 
1418 	case mm_pool32a_op:
1419 		switch (insn.mm_x_format.func) {
1420 		case mm_lwxs_op:
1421 			reg = insn.mm_x_format.rd;
1422 			goto loadW;
1423 		}
1424 
1425 		goto sigbus;
1426 
1427 	case mm_pool32b_op:
1428 		switch (insn.mm_m_format.func) {
1429 		case mm_lwp_func:
1430 			reg = insn.mm_m_format.rd;
1431 			if (reg == 31)
1432 				goto sigbus;
1433 
1434 			if (!access_ok(VERIFY_READ, addr, 8))
1435 				goto sigbus;
1436 
1437 			LoadW(addr, value, res);
1438 			if (res)
1439 				goto fault;
1440 			regs->regs[reg] = value;
1441 			addr += 4;
1442 			LoadW(addr, value, res);
1443 			if (res)
1444 				goto fault;
1445 			regs->regs[reg + 1] = value;
1446 			goto success;
1447 
1448 		case mm_swp_func:
1449 			reg = insn.mm_m_format.rd;
1450 			if (reg == 31)
1451 				goto sigbus;
1452 
1453 			if (!access_ok(VERIFY_WRITE, addr, 8))
1454 				goto sigbus;
1455 
1456 			value = regs->regs[reg];
1457 			StoreW(addr, value, res);
1458 			if (res)
1459 				goto fault;
1460 			addr += 4;
1461 			value = regs->regs[reg + 1];
1462 			StoreW(addr, value, res);
1463 			if (res)
1464 				goto fault;
1465 			goto success;
1466 
1467 		case mm_ldp_func:
1468 #ifdef CONFIG_64BIT
1469 			reg = insn.mm_m_format.rd;
1470 			if (reg == 31)
1471 				goto sigbus;
1472 
1473 			if (!access_ok(VERIFY_READ, addr, 16))
1474 				goto sigbus;
1475 
1476 			LoadDW(addr, value, res);
1477 			if (res)
1478 				goto fault;
1479 			regs->regs[reg] = value;
1480 			addr += 8;
1481 			LoadDW(addr, value, res);
1482 			if (res)
1483 				goto fault;
1484 			regs->regs[reg + 1] = value;
1485 			goto success;
1486 #endif /* CONFIG_64BIT */
1487 
1488 			goto sigill;
1489 
1490 		case mm_sdp_func:
1491 #ifdef CONFIG_64BIT
1492 			reg = insn.mm_m_format.rd;
1493 			if (reg == 31)
1494 				goto sigbus;
1495 
1496 			if (!access_ok(VERIFY_WRITE, addr, 16))
1497 				goto sigbus;
1498 
1499 			value = regs->regs[reg];
1500 			StoreDW(addr, value, res);
1501 			if (res)
1502 				goto fault;
1503 			addr += 8;
1504 			value = regs->regs[reg + 1];
1505 			StoreDW(addr, value, res);
1506 			if (res)
1507 				goto fault;
1508 			goto success;
1509 #endif /* CONFIG_64BIT */
1510 
1511 			goto sigill;
1512 
1513 		case mm_lwm32_func:
1514 			reg = insn.mm_m_format.rd;
1515 			rvar = reg & 0xf;
1516 			if ((rvar > 9) || !reg)
1517 				goto sigill;
1518 			if (reg & 0x10) {
1519 				if (!access_ok
1520 				    (VERIFY_READ, addr, 4 * (rvar + 1)))
1521 					goto sigbus;
1522 			} else {
1523 				if (!access_ok(VERIFY_READ, addr, 4 * rvar))
1524 					goto sigbus;
1525 			}
1526 			if (rvar == 9)
1527 				rvar = 8;
1528 			for (i = 16; rvar; rvar--, i++) {
1529 				LoadW(addr, value, res);
1530 				if (res)
1531 					goto fault;
1532 				addr += 4;
1533 				regs->regs[i] = value;
1534 			}
1535 			if ((reg & 0xf) == 9) {
1536 				LoadW(addr, value, res);
1537 				if (res)
1538 					goto fault;
1539 				addr += 4;
1540 				regs->regs[30] = value;
1541 			}
1542 			if (reg & 0x10) {
1543 				LoadW(addr, value, res);
1544 				if (res)
1545 					goto fault;
1546 				regs->regs[31] = value;
1547 			}
1548 			goto success;
1549 
1550 		case mm_swm32_func:
1551 			reg = insn.mm_m_format.rd;
1552 			rvar = reg & 0xf;
1553 			if ((rvar > 9) || !reg)
1554 				goto sigill;
1555 			if (reg & 0x10) {
1556 				if (!access_ok
1557 				    (VERIFY_WRITE, addr, 4 * (rvar + 1)))
1558 					goto sigbus;
1559 			} else {
1560 				if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
1561 					goto sigbus;
1562 			}
1563 			if (rvar == 9)
1564 				rvar = 8;
1565 			for (i = 16; rvar; rvar--, i++) {
1566 				value = regs->regs[i];
1567 				StoreW(addr, value, res);
1568 				if (res)
1569 					goto fault;
1570 				addr += 4;
1571 			}
1572 			if ((reg & 0xf) == 9) {
1573 				value = regs->regs[30];
1574 				StoreW(addr, value, res);
1575 				if (res)
1576 					goto fault;
1577 				addr += 4;
1578 			}
1579 			if (reg & 0x10) {
1580 				value = regs->regs[31];
1581 				StoreW(addr, value, res);
1582 				if (res)
1583 					goto fault;
1584 			}
1585 			goto success;
1586 
1587 		case mm_ldm_func:
1588 #ifdef CONFIG_64BIT
1589 			reg = insn.mm_m_format.rd;
1590 			rvar = reg & 0xf;
1591 			if ((rvar > 9) || !reg)
1592 				goto sigill;
1593 			if (reg & 0x10) {
1594 				if (!access_ok
1595 				    (VERIFY_READ, addr, 8 * (rvar + 1)))
1596 					goto sigbus;
1597 			} else {
1598 				if (!access_ok(VERIFY_READ, addr, 8 * rvar))
1599 					goto sigbus;
1600 			}
1601 			if (rvar == 9)
1602 				rvar = 8;
1603 
1604 			for (i = 16; rvar; rvar--, i++) {
1605 				LoadDW(addr, value, res);
1606 				if (res)
1607 					goto fault;
1608 				addr += 4;
1609 				regs->regs[i] = value;
1610 			}
1611 			if ((reg & 0xf) == 9) {
1612 				LoadDW(addr, value, res);
1613 				if (res)
1614 					goto fault;
1615 				addr += 8;
1616 				regs->regs[30] = value;
1617 			}
1618 			if (reg & 0x10) {
1619 				LoadDW(addr, value, res);
1620 				if (res)
1621 					goto fault;
1622 				regs->regs[31] = value;
1623 			}
1624 			goto success;
1625 #endif /* CONFIG_64BIT */
1626 
1627 			goto sigill;
1628 
1629 		case mm_sdm_func:
1630 #ifdef CONFIG_64BIT
1631 			reg = insn.mm_m_format.rd;
1632 			rvar = reg & 0xf;
1633 			if ((rvar > 9) || !reg)
1634 				goto sigill;
1635 			if (reg & 0x10) {
1636 				if (!access_ok
1637 				    (VERIFY_WRITE, addr, 8 * (rvar + 1)))
1638 					goto sigbus;
1639 			} else {
1640 				if (!access_ok(VERIFY_WRITE, addr, 8 * rvar))
1641 					goto sigbus;
1642 			}
1643 			if (rvar == 9)
1644 				rvar = 8;
1645 
1646 			for (i = 16; rvar; rvar--, i++) {
1647 				value = regs->regs[i];
1648 				StoreDW(addr, value, res);
1649 				if (res)
1650 					goto fault;
1651 				addr += 8;
1652 			}
1653 			if ((reg & 0xf) == 9) {
1654 				value = regs->regs[30];
1655 				StoreDW(addr, value, res);
1656 				if (res)
1657 					goto fault;
1658 				addr += 8;
1659 			}
1660 			if (reg & 0x10) {
1661 				value = regs->regs[31];
1662 				StoreDW(addr, value, res);
1663 				if (res)
1664 					goto fault;
1665 			}
1666 			goto success;
1667 #endif /* CONFIG_64BIT */
1668 
1669 			goto sigill;
1670 
1671 			/*  LWC2, SWC2, LDC2, SDC2 are not serviced */
1672 		}
1673 
1674 		goto sigbus;
1675 
1676 	case mm_pool32c_op:
1677 		switch (insn.mm_m_format.func) {
1678 		case mm_lwu_func:
1679 			reg = insn.mm_m_format.rd;
1680 			goto loadWU;
1681 		}
1682 
1683 		/*  LL,SC,LLD,SCD are not serviced */
1684 		goto sigbus;
1685 
1686 	case mm_pool32f_op:
1687 		switch (insn.mm_x_format.func) {
1688 		case mm_lwxc1_func:
1689 		case mm_swxc1_func:
1690 		case mm_ldxc1_func:
1691 		case mm_sdxc1_func:
1692 			goto fpu_emul;
1693 		}
1694 
1695 		goto sigbus;
1696 
1697 	case mm_ldc132_op:
1698 	case mm_sdc132_op:
1699 	case mm_lwc132_op:
1700 	case mm_swc132_op:
1701 fpu_emul:
1702 		/* roll back jump/branch */
1703 		regs->cp0_epc = origpc;
1704 		regs->regs[31] = orig31;
1705 
1706 		die_if_kernel("Unaligned FP access in kernel code", regs);
1707 		BUG_ON(!used_math());
1708 		BUG_ON(!is_fpu_owner());
1709 
1710 		lose_fpu(1);	/* save the FPU state for the emulator */
1711 		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
1712 					       &fault_addr);
1713 		own_fpu(1);	/* restore FPU state */
1714 
1715 		/* If something went wrong, signal */
1716 		process_fpemu_return(res, fault_addr, 0);
1717 
1718 		if (res == 0)
1719 			goto success;
1720 		return;
1721 
1722 	case mm_lh32_op:
1723 		reg = insn.mm_i_format.rt;
1724 		goto loadHW;
1725 
1726 	case mm_lhu32_op:
1727 		reg = insn.mm_i_format.rt;
1728 		goto loadHWU;
1729 
1730 	case mm_lw32_op:
1731 		reg = insn.mm_i_format.rt;
1732 		goto loadW;
1733 
1734 	case mm_sh32_op:
1735 		reg = insn.mm_i_format.rt;
1736 		goto storeHW;
1737 
1738 	case mm_sw32_op:
1739 		reg = insn.mm_i_format.rt;
1740 		goto storeW;
1741 
1742 	case mm_ld32_op:
1743 		reg = insn.mm_i_format.rt;
1744 		goto loadDW;
1745 
1746 	case mm_sd32_op:
1747 		reg = insn.mm_i_format.rt;
1748 		goto storeDW;
1749 
1750 	case mm_pool16c_op:
1751 		switch (insn.mm16_m_format.func) {
1752 		case mm_lwm16_op:
1753 			reg = insn.mm16_m_format.rlist;
1754 			rvar = reg + 1;
1755 			if (!access_ok(VERIFY_READ, addr, 4 * rvar))
1756 				goto sigbus;
1757 
1758 			for (i = 16; rvar; rvar--, i++) {
1759 				LoadW(addr, value, res);
1760 				if (res)
1761 					goto fault;
1762 				addr += 4;
1763 				regs->regs[i] = value;
1764 			}
1765 			LoadW(addr, value, res);
1766 			if (res)
1767 				goto fault;
1768 			regs->regs[31] = value;
1769 
1770 			goto success;
1771 
1772 		case mm_swm16_op:
1773 			reg = insn.mm16_m_format.rlist;
1774 			rvar = reg + 1;
1775 			if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
1776 				goto sigbus;
1777 
1778 			for (i = 16; rvar; rvar--, i++) {
1779 				value = regs->regs[i];
1780 				StoreW(addr, value, res);
1781 				if (res)
1782 					goto fault;
1783 				addr += 4;
1784 			}
1785 			value = regs->regs[31];
1786 			StoreW(addr, value, res);
1787 			if (res)
1788 				goto fault;
1789 
1790 			goto success;
1791 
1792 		}
1793 
1794 		goto sigbus;
1795 
1796 	case mm_lhu16_op:
1797 		reg = reg16to32[insn.mm16_rb_format.rt];
1798 		goto loadHWU;
1799 
1800 	case mm_lw16_op:
1801 		reg = reg16to32[insn.mm16_rb_format.rt];
1802 		goto loadW;
1803 
1804 	case mm_sh16_op:
1805 		reg = reg16to32st[insn.mm16_rb_format.rt];
1806 		goto storeHW;
1807 
1808 	case mm_sw16_op:
1809 		reg = reg16to32st[insn.mm16_rb_format.rt];
1810 		goto storeW;
1811 
1812 	case mm_lwsp16_op:
1813 		reg = insn.mm16_r5_format.rt;
1814 		goto loadW;
1815 
1816 	case mm_swsp16_op:
1817 		reg = insn.mm16_r5_format.rt;
1818 		goto storeW;
1819 
1820 	case mm_lwgp16_op:
1821 		reg = reg16to32[insn.mm16_r3_format.rt];
1822 		goto loadW;
1823 
1824 	default:
1825 		goto sigill;
1826 	}
1827 
1828 loadHW:
1829 	if (!access_ok(VERIFY_READ, addr, 2))
1830 		goto sigbus;
1831 
1832 	LoadHW(addr, value, res);
1833 	if (res)
1834 		goto fault;
1835 	regs->regs[reg] = value;
1836 	goto success;
1837 
1838 loadHWU:
1839 	if (!access_ok(VERIFY_READ, addr, 2))
1840 		goto sigbus;
1841 
1842 	LoadHWU(addr, value, res);
1843 	if (res)
1844 		goto fault;
1845 	regs->regs[reg] = value;
1846 	goto success;
1847 
1848 loadW:
1849 	if (!access_ok(VERIFY_READ, addr, 4))
1850 		goto sigbus;
1851 
1852 	LoadW(addr, value, res);
1853 	if (res)
1854 		goto fault;
1855 	regs->regs[reg] = value;
1856 	goto success;
1857 
1858 loadWU:
1859 #ifdef CONFIG_64BIT
1860 	/*
1861 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1862 	 * if we're on a 32-bit processor and an i-cache incoherency
1863 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1864 	 * would blow up, so for now we don't handle unaligned 64-bit
1865 	 * instructions on 32-bit kernels.
1866 	 */
1867 	if (!access_ok(VERIFY_READ, addr, 4))
1868 		goto sigbus;
1869 
1870 	LoadWU(addr, value, res);
1871 	if (res)
1872 		goto fault;
1873 	regs->regs[reg] = value;
1874 	goto success;
1875 #endif /* CONFIG_64BIT */
1876 
1877 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1878 	goto sigill;
1879 
1880 loadDW:
1881 #ifdef CONFIG_64BIT
1882 	/*
1883 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1884 	 * if we're on a 32-bit processor and an i-cache incoherency
1885 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1886 	 * would blow up, so for now we don't handle unaligned 64-bit
1887 	 * instructions on 32-bit kernels.
1888 	 */
1889 	if (!access_ok(VERIFY_READ, addr, 8))
1890 		goto sigbus;
1891 
1892 	LoadDW(addr, value, res);
1893 	if (res)
1894 		goto fault;
1895 	regs->regs[reg] = value;
1896 	goto success;
1897 #endif /* CONFIG_64BIT */
1898 
1899 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1900 	goto sigill;
1901 
1902 storeHW:
1903 	if (!access_ok(VERIFY_WRITE, addr, 2))
1904 		goto sigbus;
1905 
1906 	value = regs->regs[reg];
1907 	StoreHW(addr, value, res);
1908 	if (res)
1909 		goto fault;
1910 	goto success;
1911 
1912 storeW:
1913 	if (!access_ok(VERIFY_WRITE, addr, 4))
1914 		goto sigbus;
1915 
1916 	value = regs->regs[reg];
1917 	StoreW(addr, value, res);
1918 	if (res)
1919 		goto fault;
1920 	goto success;
1921 
1922 storeDW:
1923 #ifdef CONFIG_64BIT
1924 	/*
1925 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1926 	 * if we're on a 32-bit processor and an i-cache incoherency
1927 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1928 	 * would blow up, so for now we don't handle unaligned 64-bit
1929 	 * instructions on 32-bit kernels.
1930 	 */
1931 	if (!access_ok(VERIFY_WRITE, addr, 8))
1932 		goto sigbus;
1933 
1934 	value = regs->regs[reg];
1935 	StoreDW(addr, value, res);
1936 	if (res)
1937 		goto fault;
1938 	goto success;
1939 #endif /* CONFIG_64BIT */
1940 
1941 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1942 	goto sigill;
1943 
1944 success:
1945 	regs->cp0_epc = contpc;	/* advance or branch */
1946 
1947 #ifdef CONFIG_DEBUG_FS
1948 	unaligned_instructions++;
1949 #endif
1950 	return;
1951 
1952 fault:
1953 	/* roll back jump/branch */
1954 	regs->cp0_epc = origpc;
1955 	regs->regs[31] = orig31;
1956 	/* Did we have an exception handler installed? */
1957 	if (fixup_exception(regs))
1958 		return;
1959 
1960 	die_if_kernel("Unhandled kernel unaligned access", regs);
1961 	force_sig(SIGSEGV, current);
1962 
1963 	return;
1964 
1965 sigbus:
1966 	die_if_kernel("Unhandled kernel unaligned access", regs);
1967 	force_sig(SIGBUS, current);
1968 
1969 	return;
1970 
1971 sigill:
1972 	die_if_kernel
1973 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
1974 	force_sig(SIGILL, current);
1975 }
1976 
1977 static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
1978 {
1979 	unsigned long value;
1980 	unsigned int res;
1981 	int reg;
1982 	unsigned long orig31;
1983 	u16 __user *pc16;
1984 	unsigned long origpc;
1985 	union mips16e_instruction mips16inst, oldinst;
1986 
1987 	origpc = regs->cp0_epc;
1988 	orig31 = regs->regs[31];
1989 	pc16 = (unsigned short __user *)msk_isa16_mode(origpc);
1990 	/*
1991 	 * This load never faults.
1992 	 */
1993 	__get_user(mips16inst.full, pc16);
1994 	oldinst = mips16inst;
1995 
1996 	/* skip EXTEND instruction */
1997 	if (mips16inst.ri.opcode == MIPS16e_extend_op) {
1998 		pc16++;
1999 		__get_user(mips16inst.full, pc16);
2000 	} else if (delay_slot(regs)) {
2001 		/*  skip jump instructions */
2002 		/*  JAL/JALX are 32 bits but have OPCODE in first short int */
2003 		if (mips16inst.ri.opcode == MIPS16e_jal_op)
2004 			pc16++;
2005 		pc16++;
2006 		if (get_user(mips16inst.full, pc16))
2007 			goto sigbus;
2008 	}
2009 
2010 	switch (mips16inst.ri.opcode) {
2011 	case MIPS16e_i64_op:	/* I64 or RI64 instruction */
2012 		switch (mips16inst.i64.func) {	/* I64/RI64 func field check */
2013 		case MIPS16e_ldpc_func:
2014 		case MIPS16e_ldsp_func:
2015 			reg = reg16to32[mips16inst.ri64.ry];
2016 			goto loadDW;
2017 
2018 		case MIPS16e_sdsp_func:
2019 			reg = reg16to32[mips16inst.ri64.ry];
2020 			goto writeDW;
2021 
2022 		case MIPS16e_sdrasp_func:
2023 			reg = 29;	/* GPRSP */
2024 			goto writeDW;
2025 		}
2026 
2027 		goto sigbus;
2028 
2029 	case MIPS16e_swsp_op:
2030 	case MIPS16e_lwpc_op:
2031 	case MIPS16e_lwsp_op:
2032 		reg = reg16to32[mips16inst.ri.rx];
2033 		break;
2034 
2035 	case MIPS16e_i8_op:
2036 		if (mips16inst.i8.func != MIPS16e_swrasp_func)
2037 			goto sigbus;
2038 		reg = 29;	/* GPRSP */
2039 		break;
2040 
2041 	default:
2042 		reg = reg16to32[mips16inst.rri.ry];
2043 		break;
2044 	}
2045 
2046 	switch (mips16inst.ri.opcode) {
2047 
2048 	case MIPS16e_lb_op:
2049 	case MIPS16e_lbu_op:
2050 	case MIPS16e_sb_op:
2051 		goto sigbus;
2052 
2053 	case MIPS16e_lh_op:
2054 		if (!access_ok(VERIFY_READ, addr, 2))
2055 			goto sigbus;
2056 
2057 		LoadHW(addr, value, res);
2058 		if (res)
2059 			goto fault;
2060 		MIPS16e_compute_return_epc(regs, &oldinst);
2061 		regs->regs[reg] = value;
2062 		break;
2063 
2064 	case MIPS16e_lhu_op:
2065 		if (!access_ok(VERIFY_READ, addr, 2))
2066 			goto sigbus;
2067 
2068 		LoadHWU(addr, value, res);
2069 		if (res)
2070 			goto fault;
2071 		MIPS16e_compute_return_epc(regs, &oldinst);
2072 		regs->regs[reg] = value;
2073 		break;
2074 
2075 	case MIPS16e_lw_op:
2076 	case MIPS16e_lwpc_op:
2077 	case MIPS16e_lwsp_op:
2078 		if (!access_ok(VERIFY_READ, addr, 4))
2079 			goto sigbus;
2080 
2081 		LoadW(addr, value, res);
2082 		if (res)
2083 			goto fault;
2084 		MIPS16e_compute_return_epc(regs, &oldinst);
2085 		regs->regs[reg] = value;
2086 		break;
2087 
2088 	case MIPS16e_lwu_op:
2089 #ifdef CONFIG_64BIT
2090 		/*
2091 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2092 		 * if we're on a 32-bit processor and an i-cache incoherency
2093 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2094 		 * would blow up, so for now we don't handle unaligned 64-bit
2095 		 * instructions on 32-bit kernels.
2096 		 */
2097 		if (!access_ok(VERIFY_READ, addr, 4))
2098 			goto sigbus;
2099 
2100 		LoadWU(addr, value, res);
2101 		if (res)
2102 			goto fault;
2103 		MIPS16e_compute_return_epc(regs, &oldinst);
2104 		regs->regs[reg] = value;
2105 		break;
2106 #endif /* CONFIG_64BIT */
2107 
2108 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2109 		goto sigill;
2110 
2111 	case MIPS16e_ld_op:
2112 loadDW:
2113 #ifdef CONFIG_64BIT
2114 		/*
2115 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2116 		 * if we're on a 32-bit processor and an i-cache incoherency
2117 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2118 		 * would blow up, so for now we don't handle unaligned 64-bit
2119 		 * instructions on 32-bit kernels.
2120 		 */
2121 		if (!access_ok(VERIFY_READ, addr, 8))
2122 			goto sigbus;
2123 
2124 		LoadDW(addr, value, res);
2125 		if (res)
2126 			goto fault;
2127 		MIPS16e_compute_return_epc(regs, &oldinst);
2128 		regs->regs[reg] = value;
2129 		break;
2130 #endif /* CONFIG_64BIT */
2131 
2132 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2133 		goto sigill;
2134 
2135 	case MIPS16e_sh_op:
2136 		if (!access_ok(VERIFY_WRITE, addr, 2))
2137 			goto sigbus;
2138 
2139 		MIPS16e_compute_return_epc(regs, &oldinst);
2140 		value = regs->regs[reg];
2141 		StoreHW(addr, value, res);
2142 		if (res)
2143 			goto fault;
2144 		break;
2145 
2146 	case MIPS16e_sw_op:
2147 	case MIPS16e_swsp_op:
2148 	case MIPS16e_i8_op:	/* actually - MIPS16e_swrasp_func */
2149 		if (!access_ok(VERIFY_WRITE, addr, 4))
2150 			goto sigbus;
2151 
2152 		MIPS16e_compute_return_epc(regs, &oldinst);
2153 		value = regs->regs[reg];
2154 		StoreW(addr, value, res);
2155 		if (res)
2156 			goto fault;
2157 		break;
2158 
2159 	case MIPS16e_sd_op:
2160 writeDW:
2161 #ifdef CONFIG_64BIT
2162 		/*
2163 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2164 		 * if we're on a 32-bit processor and an i-cache incoherency
2165 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2166 		 * would blow up, so for now we don't handle unaligned 64-bit
2167 		 * instructions on 32-bit kernels.
2168 		 */
2169 		if (!access_ok(VERIFY_WRITE, addr, 8))
2170 			goto sigbus;
2171 
2172 		MIPS16e_compute_return_epc(regs, &oldinst);
2173 		value = regs->regs[reg];
2174 		StoreDW(addr, value, res);
2175 		if (res)
2176 			goto fault;
2177 		break;
2178 #endif /* CONFIG_64BIT */
2179 
2180 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2181 		goto sigill;
2182 
2183 	default:
2184 		/*
2185 		 * Pheeee...  We encountered an yet unknown instruction or
2186 		 * cache coherence problem.  Die sucker, die ...
2187 		 */
2188 		goto sigill;
2189 	}
2190 
2191 #ifdef CONFIG_DEBUG_FS
2192 	unaligned_instructions++;
2193 #endif
2194 
2195 	return;
2196 
2197 fault:
2198 	/* roll back jump/branch */
2199 	regs->cp0_epc = origpc;
2200 	regs->regs[31] = orig31;
2201 	/* Did we have an exception handler installed? */
2202 	if (fixup_exception(regs))
2203 		return;
2204 
2205 	die_if_kernel("Unhandled kernel unaligned access", regs);
2206 	force_sig(SIGSEGV, current);
2207 
2208 	return;
2209 
2210 sigbus:
2211 	die_if_kernel("Unhandled kernel unaligned access", regs);
2212 	force_sig(SIGBUS, current);
2213 
2214 	return;
2215 
2216 sigill:
2217 	die_if_kernel
2218 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
2219 	force_sig(SIGILL, current);
2220 }
2221 
2222 asmlinkage void do_ade(struct pt_regs *regs)
2223 {
2224 	enum ctx_state prev_state;
2225 	unsigned int __user *pc;
2226 	mm_segment_t seg;
2227 
2228 	prev_state = exception_enter();
2229 	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,
2230 			1, regs, regs->cp0_badvaddr);
2231 	/*
2232 	 * Did we catch a fault trying to load an instruction?
2233 	 */
2234 	if (regs->cp0_badvaddr == regs->cp0_epc)
2235 		goto sigbus;
2236 
2237 	if (user_mode(regs) && !test_thread_flag(TIF_FIXADE))
2238 		goto sigbus;
2239 	if (unaligned_action == UNALIGNED_ACTION_SIGNAL)
2240 		goto sigbus;
2241 
2242 	/*
2243 	 * Do branch emulation only if we didn't forward the exception.
2244 	 * This is all so but ugly ...
2245 	 */
2246 
2247 	/*
2248 	 * Are we running in microMIPS mode?
2249 	 */
2250 	if (get_isa16_mode(regs->cp0_epc)) {
2251 		/*
2252 		 * Did we catch a fault trying to load an instruction in
2253 		 * 16-bit mode?
2254 		 */
2255 		if (regs->cp0_badvaddr == msk_isa16_mode(regs->cp0_epc))
2256 			goto sigbus;
2257 		if (unaligned_action == UNALIGNED_ACTION_SHOW)
2258 			show_registers(regs);
2259 
2260 		if (cpu_has_mmips) {
2261 			seg = get_fs();
2262 			if (!user_mode(regs))
2263 				set_fs(KERNEL_DS);
2264 			emulate_load_store_microMIPS(regs,
2265 				(void __user *)regs->cp0_badvaddr);
2266 			set_fs(seg);
2267 
2268 			return;
2269 		}
2270 
2271 		if (cpu_has_mips16) {
2272 			seg = get_fs();
2273 			if (!user_mode(regs))
2274 				set_fs(KERNEL_DS);
2275 			emulate_load_store_MIPS16e(regs,
2276 				(void __user *)regs->cp0_badvaddr);
2277 			set_fs(seg);
2278 
2279 			return;
2280 	}
2281 
2282 		goto sigbus;
2283 	}
2284 
2285 	if (unaligned_action == UNALIGNED_ACTION_SHOW)
2286 		show_registers(regs);
2287 	pc = (unsigned int __user *)exception_epc(regs);
2288 
2289 	seg = get_fs();
2290 	if (!user_mode(regs))
2291 		set_fs(KERNEL_DS);
2292 	emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc);
2293 	set_fs(seg);
2294 
2295 	return;
2296 
2297 sigbus:
2298 	die_if_kernel("Kernel unaligned instruction access", regs);
2299 	force_sig(SIGBUS, current);
2300 
2301 	/*
2302 	 * XXX On return from the signal handler we should advance the epc
2303 	 */
2304 	exception_exit(prev_state);
2305 }
2306 
2307 #ifdef CONFIG_DEBUG_FS
2308 static int __init debugfs_unaligned(void)
2309 {
2310 	struct dentry *d;
2311 
2312 	if (!mips_debugfs_dir)
2313 		return -ENODEV;
2314 	d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
2315 			       mips_debugfs_dir, &unaligned_instructions);
2316 	if (!d)
2317 		return -ENOMEM;
2318 	d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
2319 			       mips_debugfs_dir, &unaligned_action);
2320 	if (!d)
2321 		return -ENOMEM;
2322 	return 0;
2323 }
2324 arch_initcall(debugfs_unaligned);
2325 #endif
2326