1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * MIPS idle loop and WAIT instruction support. 4 * 5 * Copyright (C) xxxx the Anonymous 6 * Copyright (C) 1994 - 2006 Ralf Baechle 7 * Copyright (C) 2003, 2004 Maciej W. Rozycki 8 * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. 9 */ 10 #include <linux/cpu.h> 11 #include <linux/export.h> 12 #include <linux/init.h> 13 #include <linux/irqflags.h> 14 #include <linux/printk.h> 15 #include <linux/sched.h> 16 #include <asm/cpu.h> 17 #include <asm/cpu-info.h> 18 #include <asm/cpu-type.h> 19 #include <asm/idle.h> 20 #include <asm/mipsregs.h> 21 22 /* 23 * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, 24 * the implementation of the "wait" feature differs between CPU families. This 25 * points to the function that implements CPU specific wait. 26 * The wait instruction stops the pipeline and reduces the power consumption of 27 * the CPU very much. 28 */ 29 void (*cpu_wait)(void); 30 EXPORT_SYMBOL(cpu_wait); 31 32 static void __cpuidle r3081_wait(void) 33 { 34 unsigned long cfg = read_c0_conf(); 35 write_c0_conf(cfg | R30XX_CONF_HALT); 36 raw_local_irq_enable(); 37 } 38 39 void __cpuidle r4k_wait(void) 40 { 41 raw_local_irq_enable(); 42 __r4k_wait(); 43 } 44 45 /* 46 * This variant is preferable as it allows testing need_resched and going to 47 * sleep depending on the outcome atomically. Unfortunately the "It is 48 * implementation-dependent whether the pipeline restarts when a non-enabled 49 * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes 50 * using this version a gamble. 51 */ 52 void __cpuidle r4k_wait_irqoff(void) 53 { 54 if (!need_resched()) 55 __asm__( 56 " .set push \n" 57 " .set arch=r4000 \n" 58 " wait \n" 59 " .set pop \n"); 60 raw_local_irq_enable(); 61 } 62 63 /* 64 * The RM7000 variant has to handle erratum 38. The workaround is to not 65 * have any pending stores when the WAIT instruction is executed. 66 */ 67 static void __cpuidle rm7k_wait_irqoff(void) 68 { 69 if (!need_resched()) 70 __asm__( 71 " .set push \n" 72 " .set arch=r4000 \n" 73 " .set noat \n" 74 " mfc0 $1, $12 \n" 75 " sync \n" 76 " mtc0 $1, $12 # stalls until W stage \n" 77 " wait \n" 78 " mtc0 $1, $12 # stalls until W stage \n" 79 " .set pop \n"); 80 raw_local_irq_enable(); 81 } 82 83 /* 84 * Au1 'wait' is only useful when the 32kHz counter is used as timer, 85 * since coreclock (and the cp0 counter) stops upon executing it. Only an 86 * interrupt can wake it, so they must be enabled before entering idle modes. 87 */ 88 static void __cpuidle au1k_wait(void) 89 { 90 unsigned long c0status = read_c0_status() | 1; /* irqs on */ 91 92 __asm__( 93 " .set push \n" 94 " .set arch=r4000 \n" 95 " cache 0x14, 0(%0) \n" 96 " cache 0x14, 32(%0) \n" 97 " sync \n" 98 " mtc0 %1, $12 \n" /* wr c0status */ 99 " wait \n" 100 " nop \n" 101 " nop \n" 102 " nop \n" 103 " nop \n" 104 " .set pop \n" 105 : : "r" (au1k_wait), "r" (c0status)); 106 } 107 108 static int __initdata nowait; 109 110 static int __init wait_disable(char *s) 111 { 112 nowait = 1; 113 114 return 1; 115 } 116 117 __setup("nowait", wait_disable); 118 119 void __init check_wait(void) 120 { 121 struct cpuinfo_mips *c = ¤t_cpu_data; 122 123 if (nowait) { 124 printk("Wait instruction disabled.\n"); 125 return; 126 } 127 128 /* 129 * MIPSr6 specifies that masked interrupts should unblock an executing 130 * wait instruction, and thus that it is safe for us to use 131 * r4k_wait_irqoff. Yippee! 132 */ 133 if (cpu_has_mips_r6) { 134 cpu_wait = r4k_wait_irqoff; 135 return; 136 } 137 138 switch (current_cpu_type()) { 139 case CPU_R3081: 140 case CPU_R3081E: 141 cpu_wait = r3081_wait; 142 break; 143 case CPU_R4200: 144 /* case CPU_R4300: */ 145 case CPU_R4600: 146 case CPU_R4640: 147 case CPU_R4650: 148 case CPU_R4700: 149 case CPU_R5000: 150 case CPU_R5500: 151 case CPU_NEVADA: 152 case CPU_4KC: 153 case CPU_4KEC: 154 case CPU_4KSC: 155 case CPU_5KC: 156 case CPU_5KE: 157 case CPU_25KF: 158 case CPU_PR4450: 159 case CPU_BMIPS3300: 160 case CPU_BMIPS4350: 161 case CPU_BMIPS4380: 162 case CPU_CAVIUM_OCTEON: 163 case CPU_CAVIUM_OCTEON_PLUS: 164 case CPU_CAVIUM_OCTEON2: 165 case CPU_CAVIUM_OCTEON3: 166 case CPU_XBURST: 167 case CPU_LOONGSON32: 168 cpu_wait = r4k_wait; 169 break; 170 case CPU_LOONGSON64: 171 if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >= 172 (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) || 173 (c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) 174 cpu_wait = r4k_wait; 175 break; 176 177 case CPU_BMIPS5000: 178 cpu_wait = r4k_wait_irqoff; 179 break; 180 case CPU_RM7000: 181 cpu_wait = rm7k_wait_irqoff; 182 break; 183 184 case CPU_PROAPTIV: 185 case CPU_P5600: 186 /* 187 * Incoming Fast Debug Channel (FDC) data during a wait 188 * instruction causes the wait never to resume, even if an 189 * interrupt is received. Avoid using wait at all if FDC data is 190 * likely to be received. 191 */ 192 if (IS_ENABLED(CONFIG_MIPS_EJTAG_FDC_TTY)) 193 break; 194 fallthrough; 195 case CPU_M14KC: 196 case CPU_M14KEC: 197 case CPU_24K: 198 case CPU_34K: 199 case CPU_1004K: 200 case CPU_1074K: 201 case CPU_INTERAPTIV: 202 case CPU_M5150: 203 case CPU_QEMU_GENERIC: 204 cpu_wait = r4k_wait; 205 if (read_c0_config7() & MIPS_CONF7_WII) 206 cpu_wait = r4k_wait_irqoff; 207 break; 208 209 case CPU_74K: 210 cpu_wait = r4k_wait; 211 if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) 212 cpu_wait = r4k_wait_irqoff; 213 break; 214 215 case CPU_TX49XX: 216 cpu_wait = r4k_wait_irqoff; 217 break; 218 case CPU_ALCHEMY: 219 cpu_wait = au1k_wait; 220 break; 221 case CPU_20KC: 222 /* 223 * WAIT on Rev1.0 has E1, E2, E3 and E16. 224 * WAIT on Rev2.0 and Rev3.0 has E16. 225 * Rev3.1 WAIT is nop, why bother 226 */ 227 if ((c->processor_id & 0xff) <= 0x64) 228 break; 229 230 /* 231 * Another rev is incrementing c0_count at a reduced clock 232 * rate while in WAIT mode. So we basically have the choice 233 * between using the cp0 timer as clocksource or avoiding 234 * the WAIT instruction. Until more details are known, 235 * disable the use of WAIT for 20Kc entirely. 236 cpu_wait = r4k_wait; 237 */ 238 break; 239 default: 240 break; 241 } 242 } 243 244 void arch_cpu_idle(void) 245 { 246 if (cpu_wait) 247 cpu_wait(); 248 else 249 raw_local_irq_enable(); 250 } 251 252 #ifdef CONFIG_CPU_IDLE 253 254 int mips_cpuidle_wait_enter(struct cpuidle_device *dev, 255 struct cpuidle_driver *drv, int index) 256 { 257 arch_cpu_idle(); 258 return index; 259 } 260 261 #endif 262