xref: /linux/arch/mips/kernel/genex.S (revision e5c86679d5e864947a52fb31e45a425dea3e7fa9) 
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License.  See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle
7 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
8 * Copyright (C) 2002, 2007  Maciej W. Rozycki
9 * Copyright (C) 2001, 2012 MIPS Technologies, Inc.  All rights reserved.
10 */
11#include <linux/init.h>
12
13#include <asm/asm.h>
14#include <asm/asmmacro.h>
15#include <asm/cacheops.h>
16#include <asm/irqflags.h>
17#include <asm/regdef.h>
18#include <asm/fpregdef.h>
19#include <asm/mipsregs.h>
20#include <asm/stackframe.h>
21#include <asm/war.h>
22#include <asm/thread_info.h>
23
24	__INIT
25
26/*
27 * General exception vector for all other CPUs.
28 *
29 * Be careful when changing this, it has to be at most 128 bytes
30 * to fit into space reserved for the exception handler.
31 */
32NESTED(except_vec3_generic, 0, sp)
33	.set	push
34	.set	noat
35#if R5432_CP0_INTERRUPT_WAR
36	mfc0	k0, CP0_INDEX
37#endif
38	mfc0	k1, CP0_CAUSE
39	andi	k1, k1, 0x7c
40#ifdef CONFIG_64BIT
41	dsll	k1, k1, 1
42#endif
43	PTR_L	k0, exception_handlers(k1)
44	jr	k0
45	.set	pop
46	END(except_vec3_generic)
47
48/*
49 * General exception handler for CPUs with virtual coherency exception.
50 *
51 * Be careful when changing this, it has to be at most 256 (as a special
52 * exception) bytes to fit into space reserved for the exception handler.
53 */
54NESTED(except_vec3_r4000, 0, sp)
55	.set	push
56	.set	arch=r4000
57	.set	noat
58	mfc0	k1, CP0_CAUSE
59	li	k0, 31<<2
60	andi	k1, k1, 0x7c
61	.set	push
62	.set	noreorder
63	.set	nomacro
64	beq	k1, k0, handle_vced
65	 li	k0, 14<<2
66	beq	k1, k0, handle_vcei
67#ifdef CONFIG_64BIT
68	 dsll	k1, k1, 1
69#endif
70	.set	pop
71	PTR_L	k0, exception_handlers(k1)
72	jr	k0
73
74	/*
75	 * Big shit, we now may have two dirty primary cache lines for the same
76	 * physical address.  We can safely invalidate the line pointed to by
77	 * c0_badvaddr because after return from this exception handler the
78	 * load / store will be re-executed.
79	 */
80handle_vced:
81	MFC0	k0, CP0_BADVADDR
82	li	k1, -4					# Is this ...
83	and	k0, k1					# ... really needed?
84	mtc0	zero, CP0_TAGLO
85	cache	Index_Store_Tag_D, (k0)
86	cache	Hit_Writeback_Inv_SD, (k0)
87#ifdef CONFIG_PROC_FS
88	PTR_LA	k0, vced_count
89	lw	k1, (k0)
90	addiu	k1, 1
91	sw	k1, (k0)
92#endif
93	eret
94
95handle_vcei:
96	MFC0	k0, CP0_BADVADDR
97	cache	Hit_Writeback_Inv_SD, (k0)		# also cleans pi
98#ifdef CONFIG_PROC_FS
99	PTR_LA	k0, vcei_count
100	lw	k1, (k0)
101	addiu	k1, 1
102	sw	k1, (k0)
103#endif
104	eret
105	.set	pop
106	END(except_vec3_r4000)
107
108	__FINIT
109
110	.align	5	/* 32 byte rollback region */
111LEAF(__r4k_wait)
112	.set	push
113	.set	noreorder
114	/* start of rollback region */
115	LONG_L	t0, TI_FLAGS($28)
116	nop
117	andi	t0, _TIF_NEED_RESCHED
118	bnez	t0, 1f
119	 nop
120	nop
121	nop
122#ifdef CONFIG_CPU_MICROMIPS
123	nop
124	nop
125	nop
126	nop
127#endif
128	.set	MIPS_ISA_ARCH_LEVEL_RAW
129	wait
130	/* end of rollback region (the region size must be power of two) */
1311:
132	jr	ra
133	 nop
134	.set	pop
135	END(__r4k_wait)
136
137	.macro	BUILD_ROLLBACK_PROLOGUE handler
138	FEXPORT(rollback_\handler)
139	.set	push
140	.set	noat
141	MFC0	k0, CP0_EPC
142	PTR_LA	k1, __r4k_wait
143	ori	k0, 0x1f	/* 32 byte rollback region */
144	xori	k0, 0x1f
145	bne	k0, k1, \handler
146	MTC0	k0, CP0_EPC
147	.set pop
148	.endm
149
150	.align	5
151BUILD_ROLLBACK_PROLOGUE handle_int
152NESTED(handle_int, PT_SIZE, sp)
153#ifdef CONFIG_TRACE_IRQFLAGS
154	/*
155	 * Check to see if the interrupted code has just disabled
156	 * interrupts and ignore this interrupt for now if so.
157	 *
158	 * local_irq_disable() disables interrupts and then calls
159	 * trace_hardirqs_off() to track the state. If an interrupt is taken
160	 * after interrupts are disabled but before the state is updated
161	 * it will appear to restore_all that it is incorrectly returning with
162	 * interrupts disabled
163	 */
164	.set	push
165	.set	noat
166	mfc0	k0, CP0_STATUS
167#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
168	and	k0, ST0_IEP
169	bnez	k0, 1f
170
171	mfc0	k0, CP0_EPC
172	.set	noreorder
173	j	k0
174	 rfe
175#else
176	and	k0, ST0_IE
177	bnez	k0, 1f
178
179	eret
180#endif
1811:
182	.set pop
183#endif
184	SAVE_ALL
185	CLI
186	TRACE_IRQS_OFF
187
188	LONG_L	s0, TI_REGS($28)
189	LONG_S	sp, TI_REGS($28)
190
191	/*
192	 * SAVE_ALL ensures we are using a valid kernel stack for the thread.
193	 * Check if we are already using the IRQ stack.
194	 */
195	move	s1, sp # Preserve the sp
196
197	/* Get IRQ stack for this CPU */
198	ASM_CPUID_MFC0	k0, ASM_SMP_CPUID_REG
199#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
200	lui	k1, %hi(irq_stack)
201#else
202	lui	k1, %highest(irq_stack)
203	daddiu	k1, %higher(irq_stack)
204	dsll	k1, 16
205	daddiu	k1, %hi(irq_stack)
206	dsll	k1, 16
207#endif
208	LONG_SRL	k0, SMP_CPUID_PTRSHIFT
209	LONG_ADDU	k1, k0
210	LONG_L	t0, %lo(irq_stack)(k1)
211
212	# Check if already on IRQ stack
213	PTR_LI	t1, ~(_THREAD_SIZE-1)
214	and	t1, t1, sp
215	beq	t0, t1, 2f
216
217	/* Switch to IRQ stack */
218	li	t1, _IRQ_STACK_START
219	PTR_ADD sp, t0, t1
220
221	/* Save task's sp on IRQ stack so that unwinding can follow it */
222	LONG_S	s1, 0(sp)
2232:
224	jal	plat_irq_dispatch
225
226	/* Restore sp */
227	move	sp, s1
228
229	j	ret_from_irq
230#ifdef CONFIG_CPU_MICROMIPS
231	nop
232#endif
233	END(handle_int)
234
235	__INIT
236
237/*
238 * Special interrupt vector for MIPS64 ISA & embedded MIPS processors.
239 * This is a dedicated interrupt exception vector which reduces the
240 * interrupt processing overhead.  The jump instruction will be replaced
241 * at the initialization time.
242 *
243 * Be careful when changing this, it has to be at most 128 bytes
244 * to fit into space reserved for the exception handler.
245 */
246NESTED(except_vec4, 0, sp)
2471:	j	1b			/* Dummy, will be replaced */
248	END(except_vec4)
249
250/*
251 * EJTAG debug exception handler.
252 * The EJTAG debug exception entry point is 0xbfc00480, which
253 * normally is in the boot PROM, so the boot PROM must do an
254 * unconditional jump to this vector.
255 */
256NESTED(except_vec_ejtag_debug, 0, sp)
257	j	ejtag_debug_handler
258#ifdef CONFIG_CPU_MICROMIPS
259	 nop
260#endif
261	END(except_vec_ejtag_debug)
262
263	__FINIT
264
265/*
266 * Vectored interrupt handler.
267 * This prototype is copied to ebase + n*IntCtl.VS and patched
268 * to invoke the handler
269 */
270BUILD_ROLLBACK_PROLOGUE except_vec_vi
271NESTED(except_vec_vi, 0, sp)
272	SAVE_SOME
273	SAVE_AT
274	.set	push
275	.set	noreorder
276	PTR_LA	v1, except_vec_vi_handler
277FEXPORT(except_vec_vi_lui)
278	lui	v0, 0		/* Patched */
279	jr	v1
280FEXPORT(except_vec_vi_ori)
281	 ori	v0, 0		/* Patched */
282	.set	pop
283	END(except_vec_vi)
284EXPORT(except_vec_vi_end)
285
286/*
287 * Common Vectored Interrupt code
288 * Complete the register saves and invoke the handler which is passed in $v0
289 */
290NESTED(except_vec_vi_handler, 0, sp)
291	SAVE_TEMP
292	SAVE_STATIC
293	CLI
294#ifdef CONFIG_TRACE_IRQFLAGS
295	move	s0, v0
296	TRACE_IRQS_OFF
297	move	v0, s0
298#endif
299
300	LONG_L	s0, TI_REGS($28)
301	LONG_S	sp, TI_REGS($28)
302
303	/*
304	 * SAVE_ALL ensures we are using a valid kernel stack for the thread.
305	 * Check if we are already using the IRQ stack.
306	 */
307	move	s1, sp # Preserve the sp
308
309	/* Get IRQ stack for this CPU */
310	ASM_CPUID_MFC0	k0, ASM_SMP_CPUID_REG
311#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
312	lui	k1, %hi(irq_stack)
313#else
314	lui	k1, %highest(irq_stack)
315	daddiu	k1, %higher(irq_stack)
316	dsll	k1, 16
317	daddiu	k1, %hi(irq_stack)
318	dsll	k1, 16
319#endif
320	LONG_SRL	k0, SMP_CPUID_PTRSHIFT
321	LONG_ADDU	k1, k0
322	LONG_L	t0, %lo(irq_stack)(k1)
323
324	# Check if already on IRQ stack
325	PTR_LI	t1, ~(_THREAD_SIZE-1)
326	and	t1, t1, sp
327	beq	t0, t1, 2f
328
329	/* Switch to IRQ stack */
330	li	t1, _IRQ_STACK_START
331	PTR_ADD sp, t0, t1
332
333	/* Save task's sp on IRQ stack so that unwinding can follow it */
334	LONG_S	s1, 0(sp)
3352:
336	jalr	v0
337
338	/* Restore sp */
339	move	sp, s1
340
341	j	ret_from_irq
342	END(except_vec_vi_handler)
343
344/*
345 * EJTAG debug exception handler.
346 */
347NESTED(ejtag_debug_handler, PT_SIZE, sp)
348	.set	push
349	.set	noat
350	MTC0	k0, CP0_DESAVE
351	mfc0	k0, CP0_DEBUG
352
353	sll	k0, k0, 30	# Check for SDBBP.
354	bgez	k0, ejtag_return
355
356	PTR_LA	k0, ejtag_debug_buffer
357	LONG_S	k1, 0(k0)
358	SAVE_ALL
359	move	a0, sp
360	jal	ejtag_exception_handler
361	RESTORE_ALL
362	PTR_LA	k0, ejtag_debug_buffer
363	LONG_L	k1, 0(k0)
364
365ejtag_return:
366	MFC0	k0, CP0_DESAVE
367	.set	mips32
368	deret
369	.set	pop
370	END(ejtag_debug_handler)
371
372/*
373 * This buffer is reserved for the use of the EJTAG debug
374 * handler.
375 */
376	.data
377EXPORT(ejtag_debug_buffer)
378	.fill	LONGSIZE
379	.previous
380
381	__INIT
382
383/*
384 * NMI debug exception handler for MIPS reference boards.
385 * The NMI debug exception entry point is 0xbfc00000, which
386 * normally is in the boot PROM, so the boot PROM must do a
387 * unconditional jump to this vector.
388 */
389NESTED(except_vec_nmi, 0, sp)
390	j	nmi_handler
391#ifdef CONFIG_CPU_MICROMIPS
392	 nop
393#endif
394	END(except_vec_nmi)
395
396	__FINIT
397
398NESTED(nmi_handler, PT_SIZE, sp)
399	.set	push
400	.set	noat
401	/*
402	 * Clear ERL - restore segment mapping
403	 * Clear BEV - required for page fault exception handler to work
404	 */
405	mfc0	k0, CP0_STATUS
406	ori	k0, k0, ST0_EXL
407	li	k1, ~(ST0_BEV | ST0_ERL)
408	and	k0, k0, k1
409	mtc0	k0, CP0_STATUS
410	_ehb
411	SAVE_ALL
412	move	a0, sp
413	jal	nmi_exception_handler
414	/* nmi_exception_handler never returns */
415	.set	pop
416	END(nmi_handler)
417
418	.macro	__build_clear_none
419	.endm
420
421	.macro	__build_clear_sti
422	TRACE_IRQS_ON
423	STI
424	.endm
425
426	.macro	__build_clear_cli
427	CLI
428	TRACE_IRQS_OFF
429	.endm
430
431	.macro	__build_clear_fpe
432	.set	push
433	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
434	.set	mips1
435	SET_HARDFLOAT
436	cfc1	a1, fcr31
437	.set	pop
438	CLI
439	TRACE_IRQS_OFF
440	.endm
441
442	.macro	__build_clear_msa_fpe
443	_cfcmsa	a1, MSA_CSR
444	CLI
445	TRACE_IRQS_OFF
446	.endm
447
448	.macro	__build_clear_ade
449	MFC0	t0, CP0_BADVADDR
450	PTR_S	t0, PT_BVADDR(sp)
451	KMODE
452	.endm
453
454	.macro	__BUILD_silent exception
455	.endm
456
457	/* Gas tries to parse the PRINT argument as a string containing
458	   string escapes and emits bogus warnings if it believes to
459	   recognize an unknown escape code.  So make the arguments
460	   start with an n and gas will believe \n is ok ...  */
461	.macro	__BUILD_verbose nexception
462	LONG_L	a1, PT_EPC(sp)
463#ifdef CONFIG_32BIT
464	PRINT("Got \nexception at %08lx\012")
465#endif
466#ifdef CONFIG_64BIT
467	PRINT("Got \nexception at %016lx\012")
468#endif
469	.endm
470
471	.macro	__BUILD_count exception
472	LONG_L	t0,exception_count_\exception
473	LONG_ADDIU	t0, 1
474	LONG_S	t0,exception_count_\exception
475	.comm	exception_count\exception, 8, 8
476	.endm
477
478	.macro	__BUILD_HANDLER exception handler clear verbose ext
479	.align	5
480	NESTED(handle_\exception, PT_SIZE, sp)
481	.set	noat
482	SAVE_ALL
483	FEXPORT(handle_\exception\ext)
484	__build_clear_\clear
485	.set	at
486	__BUILD_\verbose \exception
487	move	a0, sp
488	PTR_LA	ra, ret_from_exception
489	j	do_\handler
490	END(handle_\exception)
491	.endm
492
493	.macro	BUILD_HANDLER exception handler clear verbose
494	__BUILD_HANDLER \exception \handler \clear \verbose _int
495	.endm
496
497	BUILD_HANDLER adel ade ade silent		/* #4  */
498	BUILD_HANDLER ades ade ade silent		/* #5  */
499	BUILD_HANDLER ibe be cli silent			/* #6  */
500	BUILD_HANDLER dbe be cli silent			/* #7  */
501	BUILD_HANDLER bp bp sti silent			/* #9  */
502	BUILD_HANDLER ri ri sti silent			/* #10 */
503	BUILD_HANDLER cpu cpu sti silent		/* #11 */
504	BUILD_HANDLER ov ov sti silent			/* #12 */
505	BUILD_HANDLER tr tr sti silent			/* #13 */
506	BUILD_HANDLER msa_fpe msa_fpe msa_fpe silent	/* #14 */
507	BUILD_HANDLER fpe fpe fpe silent		/* #15 */
508	BUILD_HANDLER ftlb ftlb none silent		/* #16 */
509	BUILD_HANDLER msa msa sti silent		/* #21 */
510	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
511#ifdef	CONFIG_HARDWARE_WATCHPOINTS
512	/*
513	 * For watch, interrupts will be enabled after the watch
514	 * registers are read.
515	 */
516	BUILD_HANDLER watch watch cli silent		/* #23 */
517#else
518	BUILD_HANDLER watch watch sti verbose		/* #23 */
519#endif
520	BUILD_HANDLER mcheck mcheck cli verbose		/* #24 */
521	BUILD_HANDLER mt mt sti silent			/* #25 */
522	BUILD_HANDLER dsp dsp sti silent		/* #26 */
523	BUILD_HANDLER reserved reserved sti verbose	/* others */
524
525	.align	5
526	LEAF(handle_ri_rdhwr_tlbp)
527	.set	push
528	.set	noat
529	.set	noreorder
530	/* check if TLB contains a entry for EPC */
531	MFC0	k1, CP0_ENTRYHI
532	andi	k1, MIPS_ENTRYHI_ASID | MIPS_ENTRYHI_ASIDX
533	MFC0	k0, CP0_EPC
534	PTR_SRL	k0, _PAGE_SHIFT + 1
535	PTR_SLL	k0, _PAGE_SHIFT + 1
536	or	k1, k0
537	MTC0	k1, CP0_ENTRYHI
538	mtc0_tlbw_hazard
539	tlbp
540	tlb_probe_hazard
541	mfc0	k1, CP0_INDEX
542	.set	pop
543	bltz	k1, handle_ri	/* slow path */
544	/* fall thru */
545	END(handle_ri_rdhwr_tlbp)
546
547	LEAF(handle_ri_rdhwr)
548	.set	push
549	.set	noat
550	.set	noreorder
551	/* MIPS32:    0x7c03e83b: rdhwr v1,$29 */
552	/* microMIPS: 0x007d6b3c: rdhwr v1,$29 */
553	MFC0	k1, CP0_EPC
554#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS64_R2)
555	and	k0, k1, 1
556	beqz	k0, 1f
557	 xor	k1, k0
558	lhu	k0, (k1)
559	lhu	k1, 2(k1)
560	ins	k1, k0, 16, 16
561	lui	k0, 0x007d
562	b	docheck
563	 ori	k0, 0x6b3c
5641:
565	lui	k0, 0x7c03
566	lw	k1, (k1)
567	ori	k0, 0xe83b
568#else
569	andi	k0, k1, 1
570	bnez	k0, handle_ri
571	 lui	k0, 0x7c03
572	lw	k1, (k1)
573	ori	k0, 0xe83b
574#endif
575	.set	reorder
576docheck:
577	bne	k0, k1, handle_ri	/* if not ours */
578
579isrdhwr:
580	/* The insn is rdhwr.  No need to check CAUSE.BD here. */
581	get_saved_sp	/* k1 := current_thread_info */
582	.set	noreorder
583	MFC0	k0, CP0_EPC
584#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
585	ori	k1, _THREAD_MASK
586	xori	k1, _THREAD_MASK
587	LONG_L	v1, TI_TP_VALUE(k1)
588	LONG_ADDIU	k0, 4
589	jr	k0
590	 rfe
591#else
592#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
593	LONG_ADDIU	k0, 4		/* stall on $k0 */
594#else
595	.set	at=v1
596	LONG_ADDIU	k0, 4
597	.set	noat
598#endif
599	MTC0	k0, CP0_EPC
600	/* I hope three instructions between MTC0 and ERET are enough... */
601	ori	k1, _THREAD_MASK
602	xori	k1, _THREAD_MASK
603	LONG_L	v1, TI_TP_VALUE(k1)
604	.set	arch=r4000
605	eret
606	.set	mips0
607#endif
608	.set	pop
609	END(handle_ri_rdhwr)
610
611#ifdef CONFIG_64BIT
612/* A temporary overflow handler used by check_daddi(). */
613
614	__INIT
615
616	BUILD_HANDLER  daddi_ov daddi_ov none silent	/* #12 */
617#endif
618