1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. 7 */ 8 #ifndef __ASM_SN_INTR_H 9 #define __ASM_SN_INTR_H 10 11 /* Number of interrupt levels associated with each interrupt register. */ 12 #define N_INTPEND_BITS 64 13 14 #define INT_PEND0_BASELVL 0 15 #define INT_PEND1_BASELVL 64 16 17 #define N_INTPENDJUNK_BITS 8 18 #define INTPENDJUNK_CLRBIT 0x80 19 20 /* 21 * Macros to manipulate the interrupt register on the calling hub chip. 22 */ 23 24 #define LOCAL_HUB_SEND_INTR(level) \ 25 LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level))) 26 #define REMOTE_HUB_SEND_INTR(hub, level) \ 27 REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level))) 28 29 /* 30 * When clearing the interrupt, make sure this clear does make it 31 * to the hub. Otherwise we could end up losing interrupts. 32 * We do an uncached load of the int_pend0 register to ensure this. 33 */ 34 35 #define LOCAL_HUB_CLR_INTR(level) \ 36 do { \ 37 LOCAL_HUB_S(PI_INT_PEND_MOD, (level)); \ 38 LOCAL_HUB_L(PI_INT_PEND0); \ 39 } while (0); 40 41 #define REMOTE_HUB_CLR_INTR(hub, level) \ 42 do { \ 43 nasid_t __hub = (hub); \ 44 \ 45 REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level)); \ 46 REMOTE_HUB_L(__hub, PI_INT_PEND0); \ 47 } while (0); 48 49 /* 50 * Hard-coded interrupt levels: 51 */ 52 53 /* 54 * L0 = SW1 55 * L1 = SW2 56 * L2 = INT_PEND0 57 * L3 = INT_PEND1 58 * L4 = RTC 59 * L5 = Profiling Timer 60 * L6 = Hub Errors 61 * L7 = Count/Compare (T5 counters) 62 */ 63 64 65 /* 66 * INT_PEND0 hard-coded bits. 67 */ 68 69 /* 70 * INT_PEND0 bits determined by hardware: 71 */ 72 #define RESERVED_INTR 0 /* What is this bit? */ 73 #define GFX_INTR_A 1 74 #define GFX_INTR_B 2 75 #define PG_MIG_INTR 3 76 #define UART_INTR 4 77 #define CC_PEND_A 5 78 #define CC_PEND_B 6 79 80 /* 81 * INT_PEND0 used by the kernel for itself ... 82 */ 83 #define CPU_RESCHED_A_IRQ 7 84 #define CPU_RESCHED_B_IRQ 8 85 #define CPU_CALL_A_IRQ 9 86 #define CPU_CALL_B_IRQ 10 87 #define MSC_MESG_INTR 11 88 #define BASE_PCI_IRQ 12 89 90 /* 91 * INT_PEND0 again, bits determined by hardware / hardcoded: 92 */ 93 #define SDISK_INTR 63 /* SABLE name */ 94 #define IP_PEND0_6_63 63 /* What is this bit? */ 95 96 /* 97 * INT_PEND1 hard-coded bits: 98 */ 99 #define NI_BRDCAST_ERR_A 39 100 #define NI_BRDCAST_ERR_B 40 101 102 #define LLP_PFAIL_INTR_A 41 /* see ml/SN/SN0/sysctlr.c */ 103 #define LLP_PFAIL_INTR_B 42 104 105 #define TLB_INTR_A 43 /* used for tlb flush random */ 106 #define TLB_INTR_B 44 107 108 #define IP27_INTR_0 45 /* Reserved for PROM use */ 109 #define IP27_INTR_1 46 /* do not use in Kernel */ 110 #define IP27_INTR_2 47 111 #define IP27_INTR_3 48 112 #define IP27_INTR_4 49 113 #define IP27_INTR_5 50 114 #define IP27_INTR_6 51 115 #define IP27_INTR_7 52 116 117 #define BRIDGE_ERROR_INTR 53 /* Setup by PROM to catch */ 118 /* Bridge Errors */ 119 #define DEBUG_INTR_A 54 120 #define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */ 121 #define IO_ERROR_INTR 57 /* Setup by PROM */ 122 #define CLK_ERR_INTR 58 123 #define COR_ERR_INTR_A 59 124 #define COR_ERR_INTR_B 60 125 #define MD_COR_ERR_INTR 61 126 #define NI_ERROR_INTR 62 127 #define MSC_PANIC_INTR 63 128 129 #endif /* __ASM_SN_INTR_H */ 130