xref: /linux/arch/mips/include/asm/sibyte/bcm1480_scd.h (revision 95298d63c67673c654c08952672d016212b26054)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*  *********************************************************************
3     *  BCM1280/BCM1400 Board Support Package
4     *
5     *  SCD Constants and Macros			    File: bcm1480_scd.h
6     *
7     *  This module contains constants and macros useful for
8     *  manipulating the System Control and Debug module.
9     *
10     *  BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
11     *
12     *********************************************************************
13     *
14     *  Copyright 2000,2001,2002,2003,2004,2005
15     *  Broadcom Corporation. All rights reserved.
16     *
17     ********************************************************************* */
18 
19 #ifndef _BCM1480_SCD_H
20 #define _BCM1480_SCD_H
21 
22 #include <asm/sibyte/sb1250_defs.h>
23 
24 /*  *********************************************************************
25     *  Pull in the BCM1250's SCD since lots of stuff is the same.
26     ********************************************************************* */
27 
28 #include <asm/sibyte/sb1250_scd.h>
29 
30 /*  *********************************************************************
31     *  Some general notes:
32     *
33     *  This file is basically a "what's new" header file.  Since the
34     *  BCM1250 and the new BCM1480 (and derivatives) share many common
35     *  features, this file contains only what's new or changed from
36     *  the 1250.  (above, you can see that we include the 1250 symbols
37     *  to get the base functionality).
38     *
39     *  In software, be sure to use the correct symbols, particularly
40     *  for blocks that are different between the two chip families.
41     *  All BCM1480-specific symbols have _BCM1480_ in their names,
42     *  and all BCM1250-specific and "base" functions that are common in
43     *  both chips have no special names (this is for compatibility with
44     *  older include files).  Therefore, if you're working with the
45     *  SCD, which is very different on each chip, A_SCD_xxx implies
46     *  the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
47     *  version.
48     ********************************************************************* */
49 
50 /*  *********************************************************************
51     *  System control/debug registers
52     ********************************************************************* */
53 
54 /*
55  * System Identification and Revision Register (Table 12)
56  * Register: SCD_SYSTEM_REVISION
57  * This register is field compatible with the 1250.
58  */
59 
60 /*
61  * New part definitions
62  */
63 
64 #define K_SYS_PART_BCM1480	    0x1406
65 #define K_SYS_PART_BCM1280	    0x1206
66 #define K_SYS_PART_BCM1455	    0x1407
67 #define K_SYS_PART_BCM1255	    0x1257
68 #define K_SYS_PART_BCM1158	    0x1156
69 
70 /*
71  * Manufacturing Information Register (Table 14)
72  * Register: SCD_SYSTEM_MANUF
73  */
74 
75 /*
76  * System Configuration Register (Table 15)
77  * Register: SCD_SYSTEM_CFG
78  * Entire register is different from 1250, all new constants below
79  */
80 
81 #define M_BCM1480_SYS_RESERVED0		    _SB_MAKEMASK1(0)
82 #define M_BCM1480_SYS_HT_MINRSTCNT	    _SB_MAKEMASK1(1)
83 #define M_BCM1480_SYS_RESERVED2		    _SB_MAKEMASK1(2)
84 #define M_BCM1480_SYS_RESERVED3		    _SB_MAKEMASK1(3)
85 #define M_BCM1480_SYS_RESERVED4		    _SB_MAKEMASK1(4)
86 #define M_BCM1480_SYS_IOB_DIV		    _SB_MAKEMASK1(5)
87 
88 #define S_BCM1480_SYS_PLL_DIV		    _SB_MAKE64(6)
89 #define M_BCM1480_SYS_PLL_DIV		    _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV)
90 #define V_BCM1480_SYS_PLL_DIV(x)	    _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV)
91 #define G_BCM1480_SYS_PLL_DIV(x)	    _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV)
92 
93 #define S_BCM1480_SYS_SW_DIV		    _SB_MAKE64(11)
94 #define M_BCM1480_SYS_SW_DIV		    _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV)
95 #define V_BCM1480_SYS_SW_DIV(x)		    _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV)
96 #define G_BCM1480_SYS_SW_DIV(x)		    _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV)
97 
98 #define M_BCM1480_SYS_PCMCIA_ENABLE	    _SB_MAKEMASK1(16)
99 #define M_BCM1480_SYS_DUART1_ENABLE	    _SB_MAKEMASK1(17)
100 
101 #define S_BCM1480_SYS_BOOT_MODE		    _SB_MAKE64(18)
102 #define M_BCM1480_SYS_BOOT_MODE		    _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE)
103 #define V_BCM1480_SYS_BOOT_MODE(x)	    _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE)
104 #define G_BCM1480_SYS_BOOT_MODE(x)	    _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE)
105 #define K_BCM1480_SYS_BOOT_MODE_ROM32	    0
106 #define K_BCM1480_SYS_BOOT_MODE_ROM8	    1
107 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
108 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG   3
109 #define M_BCM1480_SYS_BOOT_MODE_SMBUS	    _SB_MAKEMASK1(19)
110 
111 #define M_BCM1480_SYS_PCI_HOST		    _SB_MAKEMASK1(20)
112 #define M_BCM1480_SYS_PCI_ARBITER	    _SB_MAKEMASK1(21)
113 #define M_BCM1480_SYS_BIG_ENDIAN	    _SB_MAKEMASK1(22)
114 #define M_BCM1480_SYS_GENCLK_EN		    _SB_MAKEMASK1(23)
115 #define M_BCM1480_SYS_GEN_PARITY_EN	    _SB_MAKEMASK1(24)
116 #define M_BCM1480_SYS_RESERVED25	    _SB_MAKEMASK1(25)
117 
118 #define S_BCM1480_SYS_CONFIG		    26
119 #define M_BCM1480_SYS_CONFIG		    _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG)
120 #define V_BCM1480_SYS_CONFIG(x)		    _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG)
121 #define G_BCM1480_SYS_CONFIG(x)		    _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG)
122 
123 #define M_BCM1480_SYS_RESERVED32	    _SB_MAKEMASK(32, 15)
124 
125 #define S_BCM1480_SYS_NODEID		    47
126 #define M_BCM1480_SYS_NODEID		    _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID)
127 #define V_BCM1480_SYS_NODEID(x)		    _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID)
128 #define G_BCM1480_SYS_NODEID(x)		    _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID)
129 
130 #define M_BCM1480_SYS_CCNUMA_EN		    _SB_MAKEMASK1(51)
131 #define M_BCM1480_SYS_CPU_RESET_0	    _SB_MAKEMASK1(52)
132 #define M_BCM1480_SYS_CPU_RESET_1	    _SB_MAKEMASK1(53)
133 #define M_BCM1480_SYS_CPU_RESET_2	    _SB_MAKEMASK1(54)
134 #define M_BCM1480_SYS_CPU_RESET_3	    _SB_MAKEMASK1(55)
135 #define S_BCM1480_SYS_DISABLECPU0	    56
136 #define M_BCM1480_SYS_DISABLECPU0	    _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
137 #define S_BCM1480_SYS_DISABLECPU1	    57
138 #define M_BCM1480_SYS_DISABLECPU1	    _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
139 #define S_BCM1480_SYS_DISABLECPU2	    58
140 #define M_BCM1480_SYS_DISABLECPU2	    _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
141 #define S_BCM1480_SYS_DISABLECPU3	    59
142 #define M_BCM1480_SYS_DISABLECPU3	    _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
143 
144 #define M_BCM1480_SYS_SB_SOFTRES	    _SB_MAKEMASK1(60)
145 #define M_BCM1480_SYS_EXT_RESET		    _SB_MAKEMASK1(61)
146 #define M_BCM1480_SYS_SYSTEM_RESET	    _SB_MAKEMASK1(62)
147 #define M_BCM1480_SYS_SW_FLAG		    _SB_MAKEMASK1(63)
148 
149 /*
150  * Scratch Register (Table 16)
151  * Register: SCD_SYSTEM_SCRATCH
152  * Same as BCM1250
153  */
154 
155 
156 /*
157  * Mailbox Registers (Table 17)
158  * Registers: SCD_MBOX_{0,1}_CPU_x
159  * Same as BCM1250
160  */
161 
162 
163 /*
164  * See bcm1480_int.h for interrupt mapper registers.
165  */
166 
167 
168 /*
169  * Watchdog Timer Initial Count Registers (Table 23)
170  * Registers: SCD_WDOG_INIT_CNT_x
171  *
172  * The watchdogs are almost the same as the 1250, except
173  * the configuration register has more bits to control the
174  * other CPUs.
175  */
176 
177 
178 /*
179  * Watchdog Timer Configuration Registers (Table 25)
180  * Registers: SCD_WDOG_CFG_x
181  */
182 
183 #define M_BCM1480_SCD_WDOG_ENABLE	    _SB_MAKEMASK1(0)
184 
185 #define S_BCM1480_SCD_WDOG_RESET_TYPE	    2
186 #define M_BCM1480_SCD_WDOG_RESET_TYPE	    _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE)
187 #define V_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE)
188 #define G_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE)
189 
190 #define K_BCM1480_SCD_WDOG_RESET_FULL	    0	/* actually, (x & 1) == 0  */
191 #define K_BCM1480_SCD_WDOG_RESET_SOFT	    1
192 #define K_BCM1480_SCD_WDOG_RESET_CPU0	    3
193 #define K_BCM1480_SCD_WDOG_RESET_CPU1	    5
194 #define K_BCM1480_SCD_WDOG_RESET_CPU2	    9
195 #define K_BCM1480_SCD_WDOG_RESET_CPU3	    17
196 #define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS   31
197 
198 
199 #define M_BCM1480_SCD_WDOG_HAS_RESET	    _SB_MAKEMASK1(8)
200 
201 /*
202  * General Timer Initial Count Registers (Table 26)
203  * Registers: SCD_TIMER_INIT_x
204  *
205  * The timer registers are the same as the BCM1250
206  */
207 
208 
209 /*
210  * ZBbus Count Register (Table 29)
211  * Register: ZBBUS_CYCLE_COUNT
212  *
213  * Same as BCM1250
214  */
215 
216 /*
217  * ZBbus Compare Registers (Table 30)
218  * Registers: ZBBUS_CYCLE_CPx
219  *
220  * Same as BCM1250
221  */
222 
223 
224 /*
225  * System Performance Counter Configuration Register (Table 31)
226  * Register: PERF_CNT_CFG_0
227  *
228  * SPC_CFG_SRC[0-3] is the same as the 1250.
229  * SPC_CFG_SRC[4-7] only exist on the 1480
230  * The clear/enable bits are in different locations on the 1250 and 1480.
231  */
232 
233 #define S_SPC_CFG_SRC4		    32
234 #define M_SPC_CFG_SRC4		    _SB_MAKEMASK(8, S_SPC_CFG_SRC4)
235 #define V_SPC_CFG_SRC4(x)	    _SB_MAKEVALUE(x, S_SPC_CFG_SRC4)
236 #define G_SPC_CFG_SRC4(x)	    _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4)
237 
238 #define S_SPC_CFG_SRC5		    40
239 #define M_SPC_CFG_SRC5		    _SB_MAKEMASK(8, S_SPC_CFG_SRC5)
240 #define V_SPC_CFG_SRC5(x)	    _SB_MAKEVALUE(x, S_SPC_CFG_SRC5)
241 #define G_SPC_CFG_SRC5(x)	    _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5)
242 
243 #define S_SPC_CFG_SRC6		    48
244 #define M_SPC_CFG_SRC6		    _SB_MAKEMASK(8, S_SPC_CFG_SRC6)
245 #define V_SPC_CFG_SRC6(x)	    _SB_MAKEVALUE(x, S_SPC_CFG_SRC6)
246 #define G_SPC_CFG_SRC6(x)	    _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6)
247 
248 #define S_SPC_CFG_SRC7		    56
249 #define M_SPC_CFG_SRC7		    _SB_MAKEMASK(8, S_SPC_CFG_SRC7)
250 #define V_SPC_CFG_SRC7(x)	    _SB_MAKEVALUE(x, S_SPC_CFG_SRC7)
251 #define G_SPC_CFG_SRC7(x)	    _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7)
252 
253 /*
254  * System Performance Counter Control Register (Table 32)
255  * Register: PERF_CNT_CFG_1
256  * BCM1480 specific
257  */
258 #define M_BCM1480_SPC_CFG_CLEAR	    _SB_MAKEMASK1(0)
259 #define M_BCM1480_SPC_CFG_ENABLE    _SB_MAKEMASK1(1)
260 #if SIBYTE_HDR_FEATURE_CHIP(1480)
261 #define M_SPC_CFG_CLEAR			M_BCM1480_SPC_CFG_CLEAR
262 #define M_SPC_CFG_ENABLE		M_BCM1480_SPC_CFG_ENABLE
263 #endif
264 
265 /*
266  * System Performance Counters (Table 33)
267  * Registers: PERF_CNT_x
268  */
269 
270 #define S_BCM1480_SPC_CNT_COUNT		    0
271 #define M_BCM1480_SPC_CNT_COUNT		    _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT)
272 #define V_BCM1480_SPC_CNT_COUNT(x)	    _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT)
273 #define G_BCM1480_SPC_CNT_COUNT(x)	    _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT)
274 
275 #define M_BCM1480_SPC_CNT_OFLOW		    _SB_MAKEMASK1(40)
276 
277 
278 /*
279  * Bus Watcher Error Status Register (Tables 36, 37)
280  * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
281  * Same as BCM1250.
282  */
283 
284 /*
285  * Bus Watcher Error Data Registers (Table 38)
286  * Registers: BUS_ERR_DATA_x
287  * Same as BCM1250.
288  */
289 
290 /*
291  * Bus Watcher L2 ECC Counter Register (Table 39)
292  * Register: BUS_L2_ERRORS
293  * Same as BCM1250.
294  */
295 
296 
297 /*
298  * Bus Watcher Memory and I/O Error Counter Register (Table 40)
299  * Register: BUS_MEM_IO_ERRORS
300  * Same as BCM1250.
301  */
302 
303 
304 /*
305  * Address Trap Registers
306  *
307  * Register layout same as BCM1250, almost.  The bus agents
308  * are different, and the address trap configuration bits are
309  * slightly different.
310  */
311 
312 #define M_BCM1480_ATRAP_INDEX		  _SB_MAKEMASK(4, 0)
313 #define M_BCM1480_ATRAP_ADDRESS		  _SB_MAKEMASK(40, 0)
314 
315 #define S_BCM1480_ATRAP_CFG_CNT		   0
316 #define M_BCM1480_ATRAP_CFG_CNT		   _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT)
317 #define V_BCM1480_ATRAP_CFG_CNT(x)	   _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT)
318 #define G_BCM1480_ATRAP_CFG_CNT(x)	   _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT)
319 
320 #define M_BCM1480_ATRAP_CFG_WRITE	   _SB_MAKEMASK1(3)
321 #define M_BCM1480_ATRAP_CFG_ALL		   _SB_MAKEMASK1(4)
322 #define M_BCM1480_ATRAP_CFG_INV		   _SB_MAKEMASK1(5)
323 #define M_BCM1480_ATRAP_CFG_USESRC	   _SB_MAKEMASK1(6)
324 #define M_BCM1480_ATRAP_CFG_SRCINV	   _SB_MAKEMASK1(7)
325 
326 #define S_BCM1480_ATRAP_CFG_AGENTID	8
327 #define M_BCM1480_ATRAP_CFG_AGENTID	_SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID)
328 #define V_BCM1480_ATRAP_CFG_AGENTID(x)	_SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID)
329 #define G_BCM1480_ATRAP_CFG_AGENTID(x)	_SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID)
330 
331 
332 #define K_BCM1480_BUS_AGENT_CPU0	    0
333 #define K_BCM1480_BUS_AGENT_CPU1	    1
334 #define K_BCM1480_BUS_AGENT_NC		    2
335 #define K_BCM1480_BUS_AGENT_IOB		    3
336 #define K_BCM1480_BUS_AGENT_SCD		    4
337 #define K_BCM1480_BUS_AGENT_L2C		    6
338 #define K_BCM1480_BUS_AGENT_MC		    7
339 #define K_BCM1480_BUS_AGENT_CPU2	    8
340 #define K_BCM1480_BUS_AGENT_CPU3	    9
341 #define K_BCM1480_BUS_AGENT_PM		    10
342 
343 #define S_BCM1480_ATRAP_CFG_CATTR	    12
344 #define M_BCM1480_ATRAP_CFG_CATTR	    _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR)
345 #define V_BCM1480_ATRAP_CFG_CATTR(x)	    _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR)
346 #define G_BCM1480_ATRAP_CFG_CATTR(x)	    _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR)
347 
348 #define K_BCM1480_ATRAP_CFG_CATTR_IGNORE    0
349 #define K_BCM1480_ATRAP_CFG_CATTR_UNC	    1
350 #define K_BCM1480_ATRAP_CFG_CATTR_NONCOH    2
351 #define K_BCM1480_ATRAP_CFG_CATTR_COHERENT  3
352 
353 #define M_BCM1480_ATRAP_CFG_CATTRINV	    _SB_MAKEMASK1(14)
354 
355 
356 /*
357  * Trace Event Registers (Table 47)
358  * Same as BCM1250.
359  */
360 
361 /*
362  * Trace Sequence Control Registers (Table 48)
363  * Registers: TRACE_SEQUENCE_x
364  *
365  * Same as BCM1250 except for two new fields.
366  */
367 
368 
369 #define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN    _SB_MAKEMASK1(25)
370 
371 #define S_BCM1480_SCD_TRSEQ_SWFUNC	    26
372 #define M_BCM1480_SCD_TRSEQ_SWFUNC	    _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC)
373 #define V_BCM1480_SCD_TRSEQ_SWFUNC(x)	    _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC)
374 #define G_BCM1480_SCD_TRSEQ_SWFUNC(x)	    _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC)
375 
376 /*
377  * Trace Control Register (Table 49)
378  * Register: TRACE_CFG
379  *
380  * BCM1480 changes to this register (other than location of the CUR_ADDR field)
381  * are defined below.
382  */
383 
384 #define S_BCM1480_SCD_TRACE_CFG_MODE	    16
385 #define M_BCM1480_SCD_TRACE_CFG_MODE	    _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE)
386 #define V_BCM1480_SCD_TRACE_CFG_MODE(x)	    _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE)
387 #define G_BCM1480_SCD_TRACE_CFG_MODE(x)	    _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE)
388 
389 #define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS	0
390 #define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1
391 #define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID	2
392 
393 #endif /* _BCM1480_SCD_H */
394