xref: /linux/arch/mips/include/asm/octeon/cvmx-fpa.h (revision 24bce201d79807b668bf9d9e0aca801c5c0d5f78)
1 /***********************license start***************
2  * Author: Cavium Networks
3  *
4  * Contact: support@caviumnetworks.com
5  * This file is part of the OCTEON SDK
6  *
7  * Copyright (c) 2003-2008 Cavium Networks
8  *
9  * This file is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License, Version 2, as
11  * published by the Free Software Foundation.
12  *
13  * This file is distributed in the hope that it will be useful, but
14  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16  * NONINFRINGEMENT.  See the GNU General Public License for more
17  * details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this file; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22  * or visit http://www.gnu.org/licenses/.
23  *
24  * This file may also be available under a different license from Cavium.
25  * Contact Cavium Networks for more information
26  ***********************license end**************************************/
27 
28 /**
29  * @file
30  *
31  * Interface to the hardware Free Pool Allocator.
32  *
33  *
34  */
35 
36 #ifndef __CVMX_FPA_H__
37 #define __CVMX_FPA_H__
38 
39 #include <linux/delay.h>
40 
41 #include <asm/octeon/cvmx-address.h>
42 #include <asm/octeon/cvmx-fpa-defs.h>
43 
44 #define CVMX_FPA_NUM_POOLS	8
45 #define CVMX_FPA_MIN_BLOCK_SIZE 128
46 #define CVMX_FPA_ALIGNMENT	128
47 
48 /**
49  * Structure describing the data format used for stores to the FPA.
50  */
51 typedef union {
52 	uint64_t u64;
53 	struct {
54 #ifdef __BIG_ENDIAN_BITFIELD
55 		/*
56 		 * the (64-bit word) location in scratchpad to write
57 		 * to (if len != 0)
58 		 */
59 		uint64_t scraddr:8;
60 		/* the number of words in the response (0 => no response) */
61 		uint64_t len:8;
62 		/* the ID of the device on the non-coherent bus */
63 		uint64_t did:8;
64 		/*
65 		 * the address that will appear in the first tick on
66 		 * the NCB bus.
67 		 */
68 		uint64_t addr:40;
69 #else
70 		uint64_t addr:40;
71 		uint64_t did:8;
72 		uint64_t len:8;
73 		uint64_t scraddr:8;
74 #endif
75 	} s;
76 } cvmx_fpa_iobdma_data_t;
77 
78 /**
79  * Structure describing the current state of a FPA pool.
80  */
81 typedef struct {
82 	/* Name it was created under */
83 	const char *name;
84 	/* Size of each block */
85 	uint64_t size;
86 	/* The base memory address of whole block */
87 	void *base;
88 	/* The number of elements in the pool at creation */
89 	uint64_t starting_element_count;
90 } cvmx_fpa_pool_info_t;
91 
92 /**
93  * Current state of all the pools. Use access functions
94  * instead of using it directly.
95  */
96 extern cvmx_fpa_pool_info_t cvmx_fpa_pool_info[CVMX_FPA_NUM_POOLS];
97 
98 /* CSR typedefs have been moved to cvmx-csr-*.h */
99 
100 /**
101  * Return the name of the pool
102  *
103  * @pool:   Pool to get the name of
104  * Returns The name
105  */
106 static inline const char *cvmx_fpa_get_name(uint64_t pool)
107 {
108 	return cvmx_fpa_pool_info[pool].name;
109 }
110 
111 /**
112  * Return the base of the pool
113  *
114  * @pool:   Pool to get the base of
115  * Returns The base
116  */
117 static inline void *cvmx_fpa_get_base(uint64_t pool)
118 {
119 	return cvmx_fpa_pool_info[pool].base;
120 }
121 
122 /**
123  * Check if a pointer belongs to an FPA pool. Return non-zero
124  * if the supplied pointer is inside the memory controlled by
125  * an FPA pool.
126  *
127  * @pool:   Pool to check
128  * @ptr:    Pointer to check
129  * Returns Non-zero if pointer is in the pool. Zero if not
130  */
131 static inline int cvmx_fpa_is_member(uint64_t pool, void *ptr)
132 {
133 	return ((ptr >= cvmx_fpa_pool_info[pool].base) &&
134 		((char *)ptr <
135 		 ((char *)(cvmx_fpa_pool_info[pool].base)) +
136 		 cvmx_fpa_pool_info[pool].size *
137 		 cvmx_fpa_pool_info[pool].starting_element_count));
138 }
139 
140 /**
141  * Enable the FPA for use. Must be performed after any CSR
142  * configuration but before any other FPA functions.
143  */
144 static inline void cvmx_fpa_enable(void)
145 {
146 	union cvmx_fpa_ctl_status status;
147 
148 	status.u64 = cvmx_read_csr(CVMX_FPA_CTL_STATUS);
149 	if (status.s.enb) {
150 		cvmx_dprintf
151 		    ("Warning: Enabling FPA when FPA already enabled.\n");
152 	}
153 
154 	/*
155 	 * Do runtime check as we allow pass1 compiled code to run on
156 	 * pass2 chips.
157 	 */
158 	if (cvmx_octeon_is_pass1()) {
159 		union cvmx_fpa_fpfx_marks marks;
160 		int i;
161 		for (i = 1; i < 8; i++) {
162 			marks.u64 =
163 			    cvmx_read_csr(CVMX_FPA_FPF1_MARKS + (i - 1) * 8ull);
164 			marks.s.fpf_wr = 0xe0;
165 			cvmx_write_csr(CVMX_FPA_FPF1_MARKS + (i - 1) * 8ull,
166 				       marks.u64);
167 		}
168 
169 		/* Enforce a 10 cycle delay between config and enable */
170 		__delay(10);
171 	}
172 
173 	/* FIXME: CVMX_FPA_CTL_STATUS read is unmodelled */
174 	status.u64 = 0;
175 	status.s.enb = 1;
176 	cvmx_write_csr(CVMX_FPA_CTL_STATUS, status.u64);
177 }
178 
179 /**
180  * Get a new block from the FPA
181  *
182  * @pool:   Pool to get the block from
183  * Returns Pointer to the block or NULL on failure
184  */
185 static inline void *cvmx_fpa_alloc(uint64_t pool)
186 {
187 	uint64_t address =
188 	    cvmx_read_csr(CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool)));
189 	if (address)
190 		return cvmx_phys_to_ptr(address);
191 	else
192 		return NULL;
193 }
194 
195 /**
196  * Asynchronously get a new block from the FPA
197  *
198  * @scr_addr: Local scratch address to put response in.	 This is a byte address,
199  *		    but must be 8 byte aligned.
200  * @pool:      Pool to get the block from
201  */
202 static inline void cvmx_fpa_async_alloc(uint64_t scr_addr, uint64_t pool)
203 {
204 	cvmx_fpa_iobdma_data_t data;
205 
206 	/*
207 	 * Hardware only uses 64 bit aligned locations, so convert
208 	 * from byte address to 64-bit index
209 	 */
210 	data.s.scraddr = scr_addr >> 3;
211 	data.s.len = 1;
212 	data.s.did = CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool);
213 	data.s.addr = 0;
214 	cvmx_send_single(data.u64);
215 }
216 
217 /**
218  * Free a block allocated with a FPA pool.  Does NOT provide memory
219  * ordering in cases where the memory block was modified by the core.
220  *
221  * @ptr:    Block to free
222  * @pool:   Pool to put it in
223  * @num_cache_lines:
224  *		 Cache lines to invalidate
225  */
226 static inline void cvmx_fpa_free_nosync(void *ptr, uint64_t pool,
227 					uint64_t num_cache_lines)
228 {
229 	cvmx_addr_t newptr;
230 	newptr.u64 = cvmx_ptr_to_phys(ptr);
231 	newptr.sfilldidspace.didspace =
232 	    CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool));
233 	/* Prevent GCC from reordering around free */
234 	barrier();
235 	/* value written is number of cache lines not written back */
236 	cvmx_write_io(newptr.u64, num_cache_lines);
237 }
238 
239 /**
240  * Free a block allocated with a FPA pool.  Provides required memory
241  * ordering in cases where memory block was modified by core.
242  *
243  * @ptr:    Block to free
244  * @pool:   Pool to put it in
245  * @num_cache_lines:
246  *		 Cache lines to invalidate
247  */
248 static inline void cvmx_fpa_free(void *ptr, uint64_t pool,
249 				 uint64_t num_cache_lines)
250 {
251 	cvmx_addr_t newptr;
252 	newptr.u64 = cvmx_ptr_to_phys(ptr);
253 	newptr.sfilldidspace.didspace =
254 	    CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool));
255 	/*
256 	 * Make sure that any previous writes to memory go out before
257 	 * we free this buffer.	 This also serves as a barrier to
258 	 * prevent GCC from reordering operations to after the
259 	 * free.
260 	 */
261 	CVMX_SYNCWS;
262 	/* value written is number of cache lines not written back */
263 	cvmx_write_io(newptr.u64, num_cache_lines);
264 }
265 
266 /**
267  * Setup a FPA pool to control a new block of memory.
268  * This can only be called once per pool. Make sure proper
269  * locking enforces this.
270  *
271  * @pool:	Pool to initialize
272  *		     0 <= pool < 8
273  * @name:	Constant character string to name this pool.
274  *		     String is not copied.
275  * @buffer:	Pointer to the block of memory to use. This must be
276  *		     accessible by all processors and external hardware.
277  * @block_size: Size for each block controlled by the FPA
278  * @num_blocks: Number of blocks
279  *
280  * Returns 0 on Success,
281  *	   -1 on failure
282  */
283 extern int cvmx_fpa_setup_pool(uint64_t pool, const char *name, void *buffer,
284 			       uint64_t block_size, uint64_t num_blocks);
285 
286 /**
287  * Shutdown a Memory pool and validate that it had all of
288  * the buffers originally placed in it. This should only be
289  * called by one processor after all hardware has finished
290  * using the pool.
291  *
292  * @pool:   Pool to shutdown
293  * Returns Zero on success
294  *	   - Positive is count of missing buffers
295  *	   - Negative is too many buffers or corrupted pointers
296  */
297 extern uint64_t cvmx_fpa_shutdown_pool(uint64_t pool);
298 
299 /**
300  * Get the size of blocks controlled by the pool
301  * This is resolved to a constant at compile time.
302  *
303  * @pool:   Pool to access
304  * Returns Size of the block in bytes
305  */
306 uint64_t cvmx_fpa_get_block_size(uint64_t pool);
307 
308 #endif /*  __CVM_FPA_H__ */
309