1 #ifndef __CVMX_CONFIG_H__ 2 #define __CVMX_CONFIG_H__ 3 4 /************************* Config Specific Defines ************************/ 5 #define CVMX_LLM_NUM_PORTS 1 6 #define CVMX_NULL_POINTER_PROTECT 1 7 #define CVMX_ENABLE_DEBUG_PRINTS 1 8 /* PKO queues per port for interface 0 (ports 0-15) */ 9 #define CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 1 10 /* PKO queues per port for interface 1 (ports 16-31) */ 11 #define CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 1 12 /* Limit on the number of PKO ports enabled for interface 0 */ 13 #define CVMX_PKO_MAX_PORTS_INTERFACE0 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 14 /* Limit on the number of PKO ports enabled for interface 1 */ 15 #define CVMX_PKO_MAX_PORTS_INTERFACE1 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 16 /* PKO queues per port for PCI (ports 32-35) */ 17 #define CVMX_PKO_QUEUES_PER_PORT_PCI 1 18 /* PKO queues per port for Loop devices (ports 36-39) */ 19 #define CVMX_PKO_QUEUES_PER_PORT_LOOP 1 20 21 /************************* FPA allocation *********************************/ 22 /* Pool sizes in bytes, must be multiple of a cache line */ 23 #define CVMX_FPA_POOL_0_SIZE (16 * CVMX_CACHE_LINE_SIZE) 24 #define CVMX_FPA_POOL_1_SIZE (1 * CVMX_CACHE_LINE_SIZE) 25 #define CVMX_FPA_POOL_2_SIZE (8 * CVMX_CACHE_LINE_SIZE) 26 #define CVMX_FPA_POOL_3_SIZE (0 * CVMX_CACHE_LINE_SIZE) 27 #define CVMX_FPA_POOL_4_SIZE (0 * CVMX_CACHE_LINE_SIZE) 28 #define CVMX_FPA_POOL_5_SIZE (0 * CVMX_CACHE_LINE_SIZE) 29 #define CVMX_FPA_POOL_6_SIZE (0 * CVMX_CACHE_LINE_SIZE) 30 #define CVMX_FPA_POOL_7_SIZE (0 * CVMX_CACHE_LINE_SIZE) 31 32 /* Pools in use */ 33 /* Packet buffers */ 34 #define CVMX_FPA_PACKET_POOL (0) 35 #define CVMX_FPA_PACKET_POOL_SIZE CVMX_FPA_POOL_0_SIZE 36 /* Work queue entrys */ 37 #define CVMX_FPA_WQE_POOL (1) 38 #define CVMX_FPA_WQE_POOL_SIZE CVMX_FPA_POOL_1_SIZE 39 /* PKO queue command buffers */ 40 #define CVMX_FPA_OUTPUT_BUFFER_POOL (2) 41 #define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE CVMX_FPA_POOL_2_SIZE 42 43 /************************* FAU allocation ********************************/ 44 /* The fetch and add registers are allocated here. They are arranged 45 * in order of descending size so that all alignment constraints are 46 * automatically met. The enums are linked so that the following enum 47 * continues allocating where the previous one left off, so the 48 * numbering within each enum always starts with zero. The macros 49 * take care of the address increment size, so the values entered 50 * always increase by 1. FAU registers are accessed with byte 51 * addresses. 52 */ 53 54 #define CVMX_FAU_REG_64_ADDR(x) ((x << 3) + CVMX_FAU_REG_64_START) 55 typedef enum { 56 CVMX_FAU_REG_64_START = 0, 57 CVMX_FAU_REG_64_END = CVMX_FAU_REG_64_ADDR(0), 58 } cvmx_fau_reg_64_t; 59 60 #define CVMX_FAU_REG_32_ADDR(x) ((x << 2) + CVMX_FAU_REG_32_START) 61 typedef enum { 62 CVMX_FAU_REG_32_START = CVMX_FAU_REG_64_END, 63 CVMX_FAU_REG_32_END = CVMX_FAU_REG_32_ADDR(0), 64 } cvmx_fau_reg_32_t; 65 66 #define CVMX_FAU_REG_16_ADDR(x) ((x << 1) + CVMX_FAU_REG_16_START) 67 typedef enum { 68 CVMX_FAU_REG_16_START = CVMX_FAU_REG_32_END, 69 CVMX_FAU_REG_16_END = CVMX_FAU_REG_16_ADDR(0), 70 } cvmx_fau_reg_16_t; 71 72 #define CVMX_FAU_REG_8_ADDR(x) ((x) + CVMX_FAU_REG_8_START) 73 typedef enum { 74 CVMX_FAU_REG_8_START = CVMX_FAU_REG_16_END, 75 CVMX_FAU_REG_8_END = CVMX_FAU_REG_8_ADDR(0), 76 } cvmx_fau_reg_8_t; 77 78 /* 79 * The name CVMX_FAU_REG_AVAIL_BASE is provided to indicate the first 80 * available FAU address that is not allocated in cvmx-config.h. This 81 * is 64 bit aligned. 82 */ 83 #define CVMX_FAU_REG_AVAIL_BASE ((CVMX_FAU_REG_8_END + 0x7) & (~0x7ULL)) 84 #define CVMX_FAU_REG_END (2048) 85 86 /********************** scratch memory allocation *************************/ 87 /* Scratchpad memory allocation. Note that these are byte memory 88 * addresses. Some uses of scratchpad (IOBDMA for example) require 89 * the use of 8-byte aligned addresses, so proper alignment needs to 90 * be taken into account. 91 */ 92 /* Generic scratch iobdma area */ 93 #define CVMX_SCR_SCRATCH (0) 94 /* First location available after cvmx-config.h allocated region. */ 95 #define CVMX_SCR_REG_AVAIL_BASE (8) 96 97 /* 98 * CVMX_HELPER_FIRST_MBUFF_SKIP is the number of bytes to reserve 99 * before the beginning of the packet. If necessary, override the 100 * default here. See the IPD section of the hardware manual for MBUFF 101 * SKIP details. 102 */ 103 #define CVMX_HELPER_FIRST_MBUFF_SKIP 184 104 105 /* 106 * CVMX_HELPER_NOT_FIRST_MBUFF_SKIP is the number of bytes to reserve 107 * in each chained packet element. If necessary, override the default 108 * here. 109 */ 110 #define CVMX_HELPER_NOT_FIRST_MBUFF_SKIP 0 111 112 /* 113 * CVMX_HELPER_ENABLE_BACK_PRESSURE controls whether back pressure is 114 * enabled for all input ports. This controls if IPD sends 115 * backpressure to all ports if Octeon's FPA pools don't have enough 116 * packet or work queue entries. Even when this is off, it is still 117 * possible to get backpressure from individual hardware ports. When 118 * configuring backpressure, also check 119 * CVMX_HELPER_DISABLE_*_BACKPRESSURE below. If necessary, override 120 * the default here. 121 */ 122 #define CVMX_HELPER_ENABLE_BACK_PRESSURE 1 123 124 /* 125 * CVMX_HELPER_ENABLE_IPD controls if the IPD is enabled in the helper 126 * function. Once it is enabled the hardware starts accepting 127 * packets. You might want to skip the IPD enable if configuration 128 * changes are need from the default helper setup. If necessary, 129 * override the default here. 130 */ 131 #define CVMX_HELPER_ENABLE_IPD 0 132 133 /* 134 * CVMX_HELPER_INPUT_TAG_TYPE selects the type of tag that the IPD assigns 135 * to incoming packets. 136 */ 137 #define CVMX_HELPER_INPUT_TAG_TYPE CVMX_POW_TAG_TYPE_ORDERED 138 139 #define CVMX_ENABLE_PARAMETER_CHECKING 0 140 141 /* 142 * The following select which fields are used by the PIP to generate 143 * the tag on INPUT 144 * 0: don't include 145 * 1: include 146 */ 147 #define CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP 0 148 #define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP 0 149 #define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT 0 150 #define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT 0 151 #define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER 0 152 #define CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP 0 153 #define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP 0 154 #define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT 0 155 #define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT 0 156 #define CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL 0 157 #define CVMX_HELPER_INPUT_TAG_INPUT_PORT 1 158 159 /* Select skip mode for input ports */ 160 #define CVMX_HELPER_INPUT_PORT_SKIP_MODE CVMX_PIP_PORT_CFG_MODE_SKIPL2 161 162 /* 163 * Force backpressure to be disabled. This overrides all other 164 * backpressure configuration. 165 */ 166 #define CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE 0 167 168 #endif /* __CVMX_CONFIG_H__ */ 169