1 /* 2 * GPIO functions for Au1000, Au1500, Au1100, Au1550, Au1200 3 * 4 * Copyright (c) 2009 Manuel Lauss. 5 * 6 * Licensed under the terms outlined in the file COPYING. 7 */ 8 9 #ifndef _ALCHEMY_GPIO_AU1000_H_ 10 #define _ALCHEMY_GPIO_AU1000_H_ 11 12 #include <asm/mach-au1x00/au1000.h> 13 14 /* The default GPIO numberspace as documented in the Alchemy manuals. 15 * GPIO0-31 from GPIO1 block, GPIO200-215 from GPIO2 block. 16 */ 17 #define ALCHEMY_GPIO1_BASE 0 18 #define ALCHEMY_GPIO2_BASE 200 19 20 #define ALCHEMY_GPIO1_NUM 32 21 #define ALCHEMY_GPIO2_NUM 16 22 #define ALCHEMY_GPIO1_MAX (ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1) 23 #define ALCHEMY_GPIO2_MAX (ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1) 24 25 #define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off)) 26 27 /* GPIO1 registers within SYS_ area */ 28 #define AU1000_SYS_TRIOUTRD 0x100 29 #define AU1000_SYS_TRIOUTCLR 0x100 30 #define AU1000_SYS_OUTPUTRD 0x108 31 #define AU1000_SYS_OUTPUTSET 0x108 32 #define AU1000_SYS_OUTPUTCLR 0x10C 33 #define AU1000_SYS_PINSTATERD 0x110 34 #define AU1000_SYS_PININPUTEN 0x110 35 36 /* register offsets within GPIO2 block */ 37 #define AU1000_GPIO2_DIR 0x00 38 #define AU1000_GPIO2_OUTPUT 0x08 39 #define AU1000_GPIO2_PINSTATE 0x0C 40 #define AU1000_GPIO2_INTENABLE 0x10 41 #define AU1000_GPIO2_ENABLE 0x14 42 43 struct gpio; 44 45 static inline int au1000_gpio1_to_irq(int gpio) 46 { 47 return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE); 48 } 49 50 static inline int au1000_gpio2_to_irq(int gpio) 51 { 52 return -ENXIO; 53 } 54 55 static inline int au1000_irq_to_gpio(int irq) 56 { 57 if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT)) 58 return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0; 59 60 return -ENXIO; 61 } 62 63 static inline int au1500_gpio1_to_irq(int gpio) 64 { 65 gpio -= ALCHEMY_GPIO1_BASE; 66 67 switch (gpio) { 68 case 0 ... 15: 69 case 20: 70 case 23 ... 28: return MAKE_IRQ(1, gpio); 71 } 72 73 return -ENXIO; 74 } 75 76 static inline int au1500_gpio2_to_irq(int gpio) 77 { 78 gpio -= ALCHEMY_GPIO2_BASE; 79 80 switch (gpio) { 81 case 0 ... 3: return MAKE_IRQ(1, 16 + gpio - 0); 82 case 4 ... 5: return MAKE_IRQ(1, 21 + gpio - 4); 83 case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6); 84 } 85 86 return -ENXIO; 87 } 88 89 static inline int au1500_irq_to_gpio(int irq) 90 { 91 switch (irq) { 92 case AU1500_GPIO0_INT ... AU1500_GPIO15_INT: 93 case AU1500_GPIO20_INT: 94 case AU1500_GPIO23_INT ... AU1500_GPIO28_INT: 95 return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0; 96 case AU1500_GPIO200_INT ... AU1500_GPIO203_INT: 97 return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0; 98 case AU1500_GPIO204_INT ... AU1500_GPIO205_INT: 99 return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4; 100 case AU1500_GPIO206_INT ... AU1500_GPIO207_INT: 101 return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6; 102 case AU1500_GPIO208_215_INT: 103 return ALCHEMY_GPIO2_BASE + 8; 104 } 105 106 return -ENXIO; 107 } 108 109 static inline int au1100_gpio1_to_irq(int gpio) 110 { 111 return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE); 112 } 113 114 static inline int au1100_gpio2_to_irq(int gpio) 115 { 116 gpio -= ALCHEMY_GPIO2_BASE; 117 118 if ((gpio >= 8) && (gpio <= 15)) 119 return MAKE_IRQ(0, 29); /* shared GPIO208_215 */ 120 121 return -ENXIO; 122 } 123 124 static inline int au1100_irq_to_gpio(int irq) 125 { 126 switch (irq) { 127 case AU1100_GPIO0_INT ... AU1100_GPIO31_INT: 128 return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0; 129 case AU1100_GPIO208_215_INT: 130 return ALCHEMY_GPIO2_BASE + 8; 131 } 132 133 return -ENXIO; 134 } 135 136 static inline int au1550_gpio1_to_irq(int gpio) 137 { 138 gpio -= ALCHEMY_GPIO1_BASE; 139 140 switch (gpio) { 141 case 0 ... 15: 142 case 20 ... 28: return MAKE_IRQ(1, gpio); 143 case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16); 144 } 145 146 return -ENXIO; 147 } 148 149 static inline int au1550_gpio2_to_irq(int gpio) 150 { 151 gpio -= ALCHEMY_GPIO2_BASE; 152 153 switch (gpio) { 154 case 0: return MAKE_IRQ(1, 16); 155 case 1 ... 5: return MAKE_IRQ(1, 17); /* shared GPIO201_205 */ 156 case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6); 157 case 8 ... 15: return MAKE_IRQ(1, 31); /* shared GPIO208_215 */ 158 } 159 160 return -ENXIO; 161 } 162 163 static inline int au1550_irq_to_gpio(int irq) 164 { 165 switch (irq) { 166 case AU1550_GPIO0_INT ... AU1550_GPIO15_INT: 167 return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0; 168 case AU1550_GPIO200_INT: 169 case AU1550_GPIO201_205_INT: 170 return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0; 171 case AU1550_GPIO16_INT ... AU1550_GPIO28_INT: 172 return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16; 173 case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT: 174 return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6; 175 } 176 177 return -ENXIO; 178 } 179 180 static inline int au1200_gpio1_to_irq(int gpio) 181 { 182 return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE); 183 } 184 185 static inline int au1200_gpio2_to_irq(int gpio) 186 { 187 gpio -= ALCHEMY_GPIO2_BASE; 188 189 switch (gpio) { 190 case 0 ... 2: return MAKE_IRQ(0, 5 + gpio - 0); 191 case 3: return MAKE_IRQ(0, 22); 192 case 4 ... 7: return MAKE_IRQ(0, 24 + gpio - 4); 193 case 8 ... 15: return MAKE_IRQ(0, 28); /* shared GPIO208_215 */ 194 } 195 196 return -ENXIO; 197 } 198 199 static inline int au1200_irq_to_gpio(int irq) 200 { 201 switch (irq) { 202 case AU1200_GPIO0_INT ... AU1200_GPIO31_INT: 203 return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0; 204 case AU1200_GPIO200_INT ... AU1200_GPIO202_INT: 205 return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0; 206 case AU1200_GPIO203_INT: 207 return ALCHEMY_GPIO2_BASE + 3; 208 case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT: 209 return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4; 210 } 211 212 return -ENXIO; 213 } 214 215 /* 216 * GPIO1 block macros for common linux gpio functions. 217 */ 218 static inline void alchemy_gpio1_set_value(int gpio, int v) 219 { 220 unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); 221 unsigned long r = v ? AU1000_SYS_OUTPUTSET : AU1000_SYS_OUTPUTCLR; 222 alchemy_wrsys(mask, r); 223 } 224 225 static inline int alchemy_gpio1_get_value(int gpio) 226 { 227 unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); 228 return alchemy_rdsys(AU1000_SYS_PINSTATERD) & mask; 229 } 230 231 static inline int alchemy_gpio1_direction_input(int gpio) 232 { 233 unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); 234 alchemy_wrsys(mask, AU1000_SYS_TRIOUTCLR); 235 return 0; 236 } 237 238 static inline int alchemy_gpio1_direction_output(int gpio, int v) 239 { 240 /* hardware switches to "output" mode when one of the two 241 * "set_value" registers is accessed. 242 */ 243 alchemy_gpio1_set_value(gpio, v); 244 return 0; 245 } 246 247 static inline int alchemy_gpio1_is_valid(int gpio) 248 { 249 return ((gpio >= ALCHEMY_GPIO1_BASE) && (gpio <= ALCHEMY_GPIO1_MAX)); 250 } 251 252 static inline int alchemy_gpio1_to_irq(int gpio) 253 { 254 switch (alchemy_get_cputype()) { 255 case ALCHEMY_CPU_AU1000: 256 return au1000_gpio1_to_irq(gpio); 257 case ALCHEMY_CPU_AU1100: 258 return au1100_gpio1_to_irq(gpio); 259 case ALCHEMY_CPU_AU1500: 260 return au1500_gpio1_to_irq(gpio); 261 case ALCHEMY_CPU_AU1550: 262 return au1550_gpio1_to_irq(gpio); 263 case ALCHEMY_CPU_AU1200: 264 return au1200_gpio1_to_irq(gpio); 265 } 266 return -ENXIO; 267 } 268 269 /* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before 270 * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this 271 * register enables use of GPIOs as wake source. 272 */ 273 static inline void alchemy_gpio1_input_enable(void) 274 { 275 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); 276 __raw_writel(0, base + 0x110); /* the write op is key */ 277 wmb(); 278 } 279 280 /* 281 * GPIO2 block macros for common linux GPIO functions. The 'gpio' 282 * parameter must be in range of ALCHEMY_GPIO2_BASE..ALCHEMY_GPIO2_MAX. 283 */ 284 static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out) 285 { 286 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); 287 unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE); 288 unsigned long d = __raw_readl(base + AU1000_GPIO2_DIR); 289 290 if (to_out) 291 d |= mask; 292 else 293 d &= ~mask; 294 __raw_writel(d, base + AU1000_GPIO2_DIR); 295 wmb(); 296 } 297 298 static inline void alchemy_gpio2_set_value(int gpio, int v) 299 { 300 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); 301 unsigned long mask; 302 mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE); 303 __raw_writel(mask, base + AU1000_GPIO2_OUTPUT); 304 wmb(); 305 } 306 307 static inline int alchemy_gpio2_get_value(int gpio) 308 { 309 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); 310 return __raw_readl(base + AU1000_GPIO2_PINSTATE) & 311 (1 << (gpio - ALCHEMY_GPIO2_BASE)); 312 } 313 314 static inline int alchemy_gpio2_direction_input(int gpio) 315 { 316 unsigned long flags; 317 local_irq_save(flags); 318 __alchemy_gpio2_mod_dir(gpio, 0); 319 local_irq_restore(flags); 320 return 0; 321 } 322 323 static inline int alchemy_gpio2_direction_output(int gpio, int v) 324 { 325 unsigned long flags; 326 alchemy_gpio2_set_value(gpio, v); 327 local_irq_save(flags); 328 __alchemy_gpio2_mod_dir(gpio, 1); 329 local_irq_restore(flags); 330 return 0; 331 } 332 333 static inline int alchemy_gpio2_is_valid(int gpio) 334 { 335 return ((gpio >= ALCHEMY_GPIO2_BASE) && (gpio <= ALCHEMY_GPIO2_MAX)); 336 } 337 338 static inline int alchemy_gpio2_to_irq(int gpio) 339 { 340 switch (alchemy_get_cputype()) { 341 case ALCHEMY_CPU_AU1000: 342 return au1000_gpio2_to_irq(gpio); 343 case ALCHEMY_CPU_AU1100: 344 return au1100_gpio2_to_irq(gpio); 345 case ALCHEMY_CPU_AU1500: 346 return au1500_gpio2_to_irq(gpio); 347 case ALCHEMY_CPU_AU1550: 348 return au1550_gpio2_to_irq(gpio); 349 case ALCHEMY_CPU_AU1200: 350 return au1200_gpio2_to_irq(gpio); 351 } 352 return -ENXIO; 353 } 354 355 /**********************************************************************/ 356 357 /* GPIO2 shared interrupts and control */ 358 359 static inline void __alchemy_gpio2_mod_int(int gpio2, int en) 360 { 361 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); 362 unsigned long r = __raw_readl(base + AU1000_GPIO2_INTENABLE); 363 if (en) 364 r |= 1 << gpio2; 365 else 366 r &= ~(1 << gpio2); 367 __raw_writel(r, base + AU1000_GPIO2_INTENABLE); 368 wmb(); 369 } 370 371 /** 372 * alchemy_gpio2_enable_int - Enable a GPIO2 pins' shared irq contribution. 373 * @gpio2: The GPIO2 pin to activate (200...215). 374 * 375 * GPIO208-215 have one shared interrupt line to the INTC. They are 376 * and'ed with a per-pin enable bit and finally or'ed together to form 377 * a single irq request (useful for active-high sources). 378 * With this function, a pins' individual contribution to the int request 379 * can be enabled. As with all other GPIO-based interrupts, the INTC 380 * must be programmed to accept the GPIO208_215 interrupt as well. 381 * 382 * NOTE: Calling this macro is only necessary for GPIO208-215; all other 383 * GPIO2-based interrupts have their own request to the INTC. Please 384 * consult your Alchemy databook for more information! 385 * 386 * NOTE: On the Au1550, GPIOs 201-205 also have a shared interrupt request 387 * line to the INTC, GPIO201_205. This function can be used for those 388 * as well. 389 * 390 * NOTE: 'gpio2' parameter must be in range of the GPIO2 numberspace 391 * (200-215 by default). No sanity checks are made, 392 */ 393 static inline void alchemy_gpio2_enable_int(int gpio2) 394 { 395 unsigned long flags; 396 397 gpio2 -= ALCHEMY_GPIO2_BASE; 398 399 /* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */ 400 switch (alchemy_get_cputype()) { 401 case ALCHEMY_CPU_AU1100: 402 case ALCHEMY_CPU_AU1500: 403 gpio2 -= 8; 404 } 405 406 local_irq_save(flags); 407 __alchemy_gpio2_mod_int(gpio2, 1); 408 local_irq_restore(flags); 409 } 410 411 /** 412 * alchemy_gpio2_disable_int - Disable a GPIO2 pins' shared irq contribution. 413 * @gpio2: The GPIO2 pin to activate (200...215). 414 * 415 * see function alchemy_gpio2_enable_int() for more information. 416 */ 417 static inline void alchemy_gpio2_disable_int(int gpio2) 418 { 419 unsigned long flags; 420 421 gpio2 -= ALCHEMY_GPIO2_BASE; 422 423 /* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */ 424 switch (alchemy_get_cputype()) { 425 case ALCHEMY_CPU_AU1100: 426 case ALCHEMY_CPU_AU1500: 427 gpio2 -= 8; 428 } 429 430 local_irq_save(flags); 431 __alchemy_gpio2_mod_int(gpio2, 0); 432 local_irq_restore(flags); 433 } 434 435 /** 436 * alchemy_gpio2_enable - Activate GPIO2 block. 437 * 438 * The GPIO2 block must be enabled explicitly to work. On systems 439 * where this isn't done by the bootloader, this macro can be used. 440 */ 441 static inline void alchemy_gpio2_enable(void) 442 { 443 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); 444 __raw_writel(3, base + AU1000_GPIO2_ENABLE); /* reset, clock enabled */ 445 wmb(); 446 __raw_writel(1, base + AU1000_GPIO2_ENABLE); /* clock enabled */ 447 wmb(); 448 } 449 450 /** 451 * alchemy_gpio2_disable - disable GPIO2 block. 452 * 453 * Disable and put GPIO2 block in low-power mode. 454 */ 455 static inline void alchemy_gpio2_disable(void) 456 { 457 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); 458 __raw_writel(2, base + AU1000_GPIO2_ENABLE); /* reset, clock disabled */ 459 wmb(); 460 } 461 462 /**********************************************************************/ 463 464 /* wrappers for on-chip gpios; can be used before gpio chips have been 465 * registered with gpiolib. 466 */ 467 static inline int alchemy_gpio_direction_input(int gpio) 468 { 469 return (gpio >= ALCHEMY_GPIO2_BASE) ? 470 alchemy_gpio2_direction_input(gpio) : 471 alchemy_gpio1_direction_input(gpio); 472 } 473 474 static inline int alchemy_gpio_direction_output(int gpio, int v) 475 { 476 return (gpio >= ALCHEMY_GPIO2_BASE) ? 477 alchemy_gpio2_direction_output(gpio, v) : 478 alchemy_gpio1_direction_output(gpio, v); 479 } 480 481 static inline int alchemy_gpio_get_value(int gpio) 482 { 483 return (gpio >= ALCHEMY_GPIO2_BASE) ? 484 alchemy_gpio2_get_value(gpio) : 485 alchemy_gpio1_get_value(gpio); 486 } 487 488 static inline void alchemy_gpio_set_value(int gpio, int v) 489 { 490 if (gpio >= ALCHEMY_GPIO2_BASE) 491 alchemy_gpio2_set_value(gpio, v); 492 else 493 alchemy_gpio1_set_value(gpio, v); 494 } 495 496 static inline int alchemy_gpio_is_valid(int gpio) 497 { 498 return (gpio >= ALCHEMY_GPIO2_BASE) ? 499 alchemy_gpio2_is_valid(gpio) : 500 alchemy_gpio1_is_valid(gpio); 501 } 502 503 static inline int alchemy_gpio_to_irq(int gpio) 504 { 505 return (gpio >= ALCHEMY_GPIO2_BASE) ? 506 alchemy_gpio2_to_irq(gpio) : 507 alchemy_gpio1_to_irq(gpio); 508 } 509 510 static inline int alchemy_irq_to_gpio(int irq) 511 { 512 switch (alchemy_get_cputype()) { 513 case ALCHEMY_CPU_AU1000: 514 return au1000_irq_to_gpio(irq); 515 case ALCHEMY_CPU_AU1100: 516 return au1100_irq_to_gpio(irq); 517 case ALCHEMY_CPU_AU1500: 518 return au1500_irq_to_gpio(irq); 519 case ALCHEMY_CPU_AU1550: 520 return au1550_irq_to_gpio(irq); 521 case ALCHEMY_CPU_AU1200: 522 return au1200_irq_to_gpio(irq); 523 } 524 return -ENXIO; 525 } 526 527 #endif /* _ALCHEMY_GPIO_AU1000_H_ */ 528