1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 1994, 1995 Waldorf GmbH 7 * Copyright (C) 1994 - 2000, 06 Ralf Baechle 8 * Copyright (C) 1999, 2000 Silicon Graphics, Inc. 9 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. 10 * Author: Maciej W. Rozycki <macro@mips.com> 11 */ 12 #ifndef _ASM_IO_H 13 #define _ASM_IO_H 14 15 #include <linux/compiler.h> 16 #include <linux/kernel.h> 17 #include <linux/types.h> 18 #include <linux/irqflags.h> 19 20 #include <asm/addrspace.h> 21 #include <asm/barrier.h> 22 #include <asm/bug.h> 23 #include <asm/byteorder.h> 24 #include <asm/cpu.h> 25 #include <asm/cpu-features.h> 26 #include <asm/page.h> 27 #include <asm/pgtable-bits.h> 28 #include <asm/processor.h> 29 #include <asm/string.h> 30 #include <mangle-port.h> 31 32 /* 33 * Raw operations are never swapped in software. OTOH values that raw 34 * operations are working on may or may not have been swapped by the bus 35 * hardware. An example use would be for flash memory that's used for 36 * execute in place. 37 */ 38 # define __raw_ioswabb(a, x) (x) 39 # define __raw_ioswabw(a, x) (x) 40 # define __raw_ioswabl(a, x) (x) 41 # define __raw_ioswabq(a, x) (x) 42 # define ____raw_ioswabq(a, x) (x) 43 44 # define __relaxed_ioswabb ioswabb 45 # define __relaxed_ioswabw ioswabw 46 # define __relaxed_ioswabl ioswabl 47 # define __relaxed_ioswabq ioswabq 48 49 /* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ 50 51 /* 52 * On MIPS I/O ports are memory mapped, so we access them using normal 53 * load/store instructions. mips_io_port_base is the virtual address to 54 * which all ports are being mapped. For sake of efficiency some code 55 * assumes that this is an address that can be loaded with a single lui 56 * instruction, so the lower 16 bits must be zero. Should be true on 57 * any sane architecture; generic code does not use this assumption. 58 */ 59 extern unsigned long mips_io_port_base; 60 61 static inline void set_io_port_base(unsigned long base) 62 { 63 mips_io_port_base = base; 64 } 65 66 /* 67 * Provide the necessary definitions for generic iomap. We make use of 68 * mips_io_port_base for iomap(), but we don't reserve any low addresses for 69 * use with I/O ports. 70 */ 71 72 #define HAVE_ARCH_PIO_SIZE 73 #define PIO_OFFSET mips_io_port_base 74 #define PIO_MASK IO_SPACE_LIMIT 75 #define PIO_RESERVED 0x0UL 76 77 /* 78 * Enforce in-order execution of data I/O. In the MIPS architecture 79 * these are equivalent to corresponding platform-specific memory 80 * barriers defined in <asm/barrier.h>. API pinched from PowerPC, 81 * with sync additionally defined. 82 */ 83 #define iobarrier_rw() mb() 84 #define iobarrier_r() rmb() 85 #define iobarrier_w() wmb() 86 #define iobarrier_sync() iob() 87 88 /* 89 * virt_to_phys - map virtual addresses to physical 90 * @address: address to remap 91 * 92 * The returned physical address is the physical (CPU) mapping for 93 * the memory address given. It is only valid to use this function on 94 * addresses directly mapped or allocated via kmalloc. 95 * 96 * This function does not give bus mappings for DMA transfers. In 97 * almost all conceivable cases a device driver should not be using 98 * this function 99 */ 100 static inline unsigned long __virt_to_phys_nodebug(volatile const void *address) 101 { 102 return __pa(address); 103 } 104 105 #ifdef CONFIG_DEBUG_VIRTUAL 106 extern phys_addr_t __virt_to_phys(volatile const void *x); 107 #else 108 #define __virt_to_phys(x) __virt_to_phys_nodebug(x) 109 #endif 110 111 #define virt_to_phys virt_to_phys 112 static inline phys_addr_t virt_to_phys(const volatile void *x) 113 { 114 return __virt_to_phys(x); 115 } 116 117 /* 118 * phys_to_virt - map physical address to virtual 119 * @address: address to remap 120 * 121 * The returned virtual address is a current CPU mapping for 122 * the memory address given. It is only valid to use this function on 123 * addresses that have a kernel mapping 124 * 125 * This function does not handle bus mappings for DMA transfers. In 126 * almost all conceivable cases a device driver should not be using 127 * this function 128 */ 129 static inline void * phys_to_virt(unsigned long address) 130 { 131 return __va(address); 132 } 133 134 /* 135 * ISA I/O bus memory addresses are 1:1 with the physical address. 136 */ 137 static inline unsigned long isa_virt_to_bus(volatile void *address) 138 { 139 return virt_to_phys(address); 140 } 141 142 static inline void *isa_bus_to_virt(unsigned long address) 143 { 144 return phys_to_virt(address); 145 } 146 147 /* 148 * Change "struct page" to physical address. 149 */ 150 #define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) 151 152 void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size, 153 unsigned long prot_val); 154 void iounmap(const volatile void __iomem *addr); 155 156 /* 157 * ioremap - map bus memory into CPU space 158 * @offset: bus address of the memory 159 * @size: size of the resource to map 160 * 161 * ioremap performs a platform specific sequence of operations to 162 * make bus memory CPU accessible via the readb/readw/readl/writeb/ 163 * writew/writel functions and the other mmio helpers. The returned 164 * address is not guaranteed to be usable directly as a virtual 165 * address. 166 */ 167 #define ioremap(offset, size) \ 168 ioremap_prot((offset), (size), _CACHE_UNCACHED) 169 #define ioremap_uc ioremap 170 171 /* 172 * ioremap_cache - map bus memory into CPU space 173 * @offset: bus address of the memory 174 * @size: size of the resource to map 175 * 176 * ioremap_cache performs a platform specific sequence of operations to 177 * make bus memory CPU accessible via the readb/readw/readl/writeb/ 178 * writew/writel functions and the other mmio helpers. The returned 179 * address is not guaranteed to be usable directly as a virtual 180 * address. 181 * 182 * This version of ioremap ensures that the memory is marked cachable by 183 * the CPU. Also enables full write-combining. Useful for some 184 * memory-like regions on I/O busses. 185 */ 186 #define ioremap_cache(offset, size) \ 187 ioremap_prot((offset), (size), _page_cachable_default) 188 189 /* 190 * ioremap_wc - map bus memory into CPU space 191 * @offset: bus address of the memory 192 * @size: size of the resource to map 193 * 194 * ioremap_wc performs a platform specific sequence of operations to 195 * make bus memory CPU accessible via the readb/readw/readl/writeb/ 196 * writew/writel functions and the other mmio helpers. The returned 197 * address is not guaranteed to be usable directly as a virtual 198 * address. 199 * 200 * This version of ioremap ensures that the memory is marked uncachable 201 * but accelerated by means of write-combining feature. It is specifically 202 * useful for PCIe prefetchable windows, which may vastly improve a 203 * communications performance. If it was determined on boot stage, what 204 * CPU CCA doesn't support UCA, the method shall fall-back to the 205 * _CACHE_UNCACHED option (see cpu_probe() method). 206 */ 207 #define ioremap_wc(offset, size) \ 208 ioremap_prot((offset), (size), boot_cpu_data.writecombine) 209 210 #include <asm-generic/iomap.h> 211 212 #if defined(CONFIG_CPU_CAVIUM_OCTEON) 213 #define war_io_reorder_wmb() wmb() 214 #else 215 #define war_io_reorder_wmb() barrier() 216 #endif 217 218 #define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, barrier, relax, irq) \ 219 \ 220 static inline void pfx##write##bwlq(type val, \ 221 volatile void __iomem *mem) \ 222 { \ 223 volatile type *__mem; \ 224 type __val; \ 225 \ 226 if (barrier) \ 227 iobarrier_rw(); \ 228 else \ 229 war_io_reorder_wmb(); \ 230 \ 231 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ 232 \ 233 __val = pfx##ioswab##bwlq(__mem, val); \ 234 \ 235 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ 236 *__mem = __val; \ 237 else if (cpu_has_64bits) { \ 238 unsigned long __flags; \ 239 type __tmp; \ 240 \ 241 if (irq) \ 242 local_irq_save(__flags); \ 243 __asm__ __volatile__( \ 244 ".set push" "\t\t# __writeq""\n\t" \ 245 ".set arch=r4000" "\n\t" \ 246 "dsll32 %L0, %L0, 0" "\n\t" \ 247 "dsrl32 %L0, %L0, 0" "\n\t" \ 248 "dsll32 %M0, %M0, 0" "\n\t" \ 249 "or %L0, %L0, %M0" "\n\t" \ 250 "sd %L0, %2" "\n\t" \ 251 ".set pop" "\n" \ 252 : "=r" (__tmp) \ 253 : "0" (__val), "m" (*__mem)); \ 254 if (irq) \ 255 local_irq_restore(__flags); \ 256 } else \ 257 BUG(); \ 258 } \ 259 \ 260 static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ 261 { \ 262 volatile type *__mem; \ 263 type __val; \ 264 \ 265 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ 266 \ 267 if (barrier) \ 268 iobarrier_rw(); \ 269 \ 270 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ 271 __val = *__mem; \ 272 else if (cpu_has_64bits) { \ 273 unsigned long __flags; \ 274 \ 275 if (irq) \ 276 local_irq_save(__flags); \ 277 __asm__ __volatile__( \ 278 ".set push" "\t\t# __readq" "\n\t" \ 279 ".set arch=r4000" "\n\t" \ 280 "ld %L0, %1" "\n\t" \ 281 "dsra32 %M0, %L0, 0" "\n\t" \ 282 "sll %L0, %L0, 0" "\n\t" \ 283 ".set pop" "\n" \ 284 : "=r" (__val) \ 285 : "m" (*__mem)); \ 286 if (irq) \ 287 local_irq_restore(__flags); \ 288 } else { \ 289 __val = 0; \ 290 BUG(); \ 291 } \ 292 \ 293 /* prevent prefetching of coherent DMA data prematurely */ \ 294 if (!relax) \ 295 rmb(); \ 296 return pfx##ioswab##bwlq(__mem, __val); \ 297 } 298 299 #define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax, p) \ 300 \ 301 static inline void pfx##out##bwlq##p(type val, unsigned long port) \ 302 { \ 303 volatile type *__addr; \ 304 type __val; \ 305 \ 306 if (barrier) \ 307 iobarrier_rw(); \ 308 else \ 309 war_io_reorder_wmb(); \ 310 \ 311 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ 312 \ 313 __val = pfx##ioswab##bwlq(__addr, val); \ 314 \ 315 /* Really, we want this to be atomic */ \ 316 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ 317 \ 318 *__addr = __val; \ 319 } \ 320 \ 321 static inline type pfx##in##bwlq##p(unsigned long port) \ 322 { \ 323 volatile type *__addr; \ 324 type __val; \ 325 \ 326 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ 327 \ 328 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ 329 \ 330 if (barrier) \ 331 iobarrier_rw(); \ 332 \ 333 __val = *__addr; \ 334 \ 335 /* prevent prefetching of coherent DMA data prematurely */ \ 336 if (!relax) \ 337 rmb(); \ 338 return pfx##ioswab##bwlq(__addr, __val); \ 339 } 340 341 #define __BUILD_MEMORY_PFX(bus, bwlq, type, relax) \ 342 \ 343 __BUILD_MEMORY_SINGLE(bus, bwlq, type, 1, relax, 1) 344 345 #define BUILDIO_MEM(bwlq, type) \ 346 \ 347 __BUILD_MEMORY_PFX(__raw_, bwlq, type, 0) \ 348 __BUILD_MEMORY_PFX(__relaxed_, bwlq, type, 1) \ 349 __BUILD_MEMORY_PFX(__mem_, bwlq, type, 0) \ 350 __BUILD_MEMORY_PFX(, bwlq, type, 0) 351 352 BUILDIO_MEM(b, u8) 353 BUILDIO_MEM(w, u16) 354 BUILDIO_MEM(l, u32) 355 #ifdef CONFIG_64BIT 356 BUILDIO_MEM(q, u64) 357 #else 358 __BUILD_MEMORY_PFX(__raw_, q, u64, 0) 359 __BUILD_MEMORY_PFX(__mem_, q, u64, 0) 360 #endif 361 362 #define __BUILD_IOPORT_PFX(bus, bwlq, type) \ 363 __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0,) \ 364 __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0, _p) 365 366 #define BUILDIO_IOPORT(bwlq, type) \ 367 __BUILD_IOPORT_PFX(, bwlq, type) \ 368 __BUILD_IOPORT_PFX(__mem_, bwlq, type) 369 370 BUILDIO_IOPORT(b, u8) 371 BUILDIO_IOPORT(w, u16) 372 BUILDIO_IOPORT(l, u32) 373 #ifdef CONFIG_64BIT 374 BUILDIO_IOPORT(q, u64) 375 #endif 376 377 #define __BUILDIO(bwlq, type) \ 378 \ 379 __BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 1, 0, 0) 380 381 __BUILDIO(q, u64) 382 383 #define readb_relaxed __relaxed_readb 384 #define readw_relaxed __relaxed_readw 385 #define readl_relaxed __relaxed_readl 386 #ifdef CONFIG_64BIT 387 #define readq_relaxed __relaxed_readq 388 #endif 389 390 #define writeb_relaxed __relaxed_writeb 391 #define writew_relaxed __relaxed_writew 392 #define writel_relaxed __relaxed_writel 393 #ifdef CONFIG_64BIT 394 #define writeq_relaxed __relaxed_writeq 395 #endif 396 397 #define readb_be(addr) \ 398 __raw_readb((__force unsigned *)(addr)) 399 #define readw_be(addr) \ 400 be16_to_cpu(__raw_readw((__force unsigned *)(addr))) 401 #define readl_be(addr) \ 402 be32_to_cpu(__raw_readl((__force unsigned *)(addr))) 403 #define readq_be(addr) \ 404 be64_to_cpu(__raw_readq((__force unsigned *)(addr))) 405 406 #define writeb_be(val, addr) \ 407 __raw_writeb((val), (__force unsigned *)(addr)) 408 #define writew_be(val, addr) \ 409 __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr)) 410 #define writel_be(val, addr) \ 411 __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr)) 412 #define writeq_be(val, addr) \ 413 __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr)) 414 415 /* 416 * Some code tests for these symbols 417 */ 418 #ifdef CONFIG_64BIT 419 #define readq readq 420 #define writeq writeq 421 #endif 422 423 #define __BUILD_MEMORY_STRING(bwlq, type) \ 424 \ 425 static inline void writes##bwlq(volatile void __iomem *mem, \ 426 const void *addr, unsigned int count) \ 427 { \ 428 const volatile type *__addr = addr; \ 429 \ 430 while (count--) { \ 431 __mem_write##bwlq(*__addr, mem); \ 432 __addr++; \ 433 } \ 434 } \ 435 \ 436 static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ 437 unsigned int count) \ 438 { \ 439 volatile type *__addr = addr; \ 440 \ 441 while (count--) { \ 442 *__addr = __mem_read##bwlq(mem); \ 443 __addr++; \ 444 } \ 445 } 446 447 #define __BUILD_IOPORT_STRING(bwlq, type) \ 448 \ 449 static inline void outs##bwlq(unsigned long port, const void *addr, \ 450 unsigned int count) \ 451 { \ 452 const volatile type *__addr = addr; \ 453 \ 454 while (count--) { \ 455 __mem_out##bwlq(*__addr, port); \ 456 __addr++; \ 457 } \ 458 } \ 459 \ 460 static inline void ins##bwlq(unsigned long port, void *addr, \ 461 unsigned int count) \ 462 { \ 463 volatile type *__addr = addr; \ 464 \ 465 while (count--) { \ 466 *__addr = __mem_in##bwlq(port); \ 467 __addr++; \ 468 } \ 469 } 470 471 #define BUILDSTRING(bwlq, type) \ 472 \ 473 __BUILD_MEMORY_STRING(bwlq, type) \ 474 __BUILD_IOPORT_STRING(bwlq, type) 475 476 BUILDSTRING(b, u8) 477 BUILDSTRING(w, u16) 478 BUILDSTRING(l, u32) 479 #ifdef CONFIG_64BIT 480 BUILDSTRING(q, u64) 481 #endif 482 483 static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) 484 { 485 memset((void __force *) addr, val, count); 486 } 487 static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) 488 { 489 memcpy(dst, (void __force *) src, count); 490 } 491 static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) 492 { 493 memcpy((void __force *) dst, src, count); 494 } 495 496 /* 497 * The caches on some architectures aren't dma-coherent and have need to 498 * handle this in software. There are three types of operations that 499 * can be applied to dma buffers. 500 * 501 * - dma_cache_wback_inv(start, size) makes caches and coherent by 502 * writing the content of the caches back to memory, if necessary. 503 * The function also invalidates the affected part of the caches as 504 * necessary before DMA transfers from outside to memory. 505 * - dma_cache_wback(start, size) makes caches and coherent by 506 * writing the content of the caches back to memory, if necessary. 507 * The function also invalidates the affected part of the caches as 508 * necessary before DMA transfers from outside to memory. 509 * - dma_cache_inv(start, size) invalidates the affected parts of the 510 * caches. Dirty lines of the caches may be written back or simply 511 * be discarded. This operation is necessary before dma operations 512 * to the memory. 513 * 514 * This API used to be exported; it now is for arch code internal use only. 515 */ 516 #ifdef CONFIG_DMA_NONCOHERENT 517 518 extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size); 519 extern void (*_dma_cache_wback)(unsigned long start, unsigned long size); 520 extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); 521 522 #define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size) 523 #define dma_cache_wback(start, size) _dma_cache_wback(start, size) 524 #define dma_cache_inv(start, size) _dma_cache_inv(start, size) 525 526 #else /* Sane hardware */ 527 528 #define dma_cache_wback_inv(start,size) \ 529 do { (void) (start); (void) (size); } while (0) 530 #define dma_cache_wback(start,size) \ 531 do { (void) (start); (void) (size); } while (0) 532 #define dma_cache_inv(start,size) \ 533 do { (void) (start); (void) (size); } while (0) 534 535 #endif /* CONFIG_DMA_NONCOHERENT */ 536 537 /* 538 * Read a 32-bit register that requires a 64-bit read cycle on the bus. 539 * Avoid interrupt mucking, just adjust the address for 4-byte access. 540 * Assume the addresses are 8-byte aligned. 541 */ 542 #ifdef __MIPSEB__ 543 #define __CSR_32_ADJUST 4 544 #else 545 #define __CSR_32_ADJUST 0 546 #endif 547 548 #define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v)) 549 #define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST)) 550 551 /* 552 * Convert a physical pointer to a virtual kernel pointer for /dev/mem 553 * access 554 */ 555 #define xlate_dev_mem_ptr(p) __va(p) 556 #define unxlate_dev_mem_ptr(p, v) do { } while (0) 557 558 void __ioread64_copy(void *to, const void __iomem *from, size_t count); 559 560 #endif /* _ASM_IO_H */ 561