xref: /linux/arch/mips/boot/dts/ni/169445.dts (revision 4b132aacb0768ac1e652cf517097ea6f237214b9)
1/dts-v1/;
2
3/ {
4	#address-cells = <1>;
5	#size-cells = <1>;
6	compatible = "ni,169445";
7
8	cpus {
9		#address-cells = <1>;
10		#size-cells = <0>;
11		cpu@0 {
12			device_type = "cpu";
13			compatible = "mti,mips14KEc";
14			clocks = <&baseclk>;
15			reg = <0>;
16		};
17	};
18
19	memory@0 {
20		device_type = "memory";
21		reg = <0x0 0x10000000>;
22	};
23
24	baseclk: baseclock {
25		compatible = "fixed-clock";
26		#clock-cells = <0>;
27		clock-frequency = <50000000>;
28	};
29
30	cpu_intc: interrupt-controller {
31		#address-cells = <0>;
32		compatible = "mti,cpu-interrupt-controller";
33		interrupt-controller;
34		#interrupt-cells = <1>;
35	};
36
37	ahb@1f300000 {
38		compatible = "simple-bus";
39		#address-cells = <1>;
40		#size-cells = <1>;
41		ranges = <0x0 0x1f300000 0x80FFF>;
42
43		gpio1: gpio@10 {
44			compatible = "ni,169445-nand-gpio";
45			reg = <0x10 0x4>;
46			reg-names = "dat";
47			gpio-controller;
48			#gpio-cells = <2>;
49		};
50
51		gpio2: gpio@14 {
52			compatible = "ni,169445-nand-gpio";
53			reg = <0x14 0x4>;
54			reg-names = "dat";
55			gpio-controller;
56			#gpio-cells = <2>;
57			no-output;
58		};
59
60		nand@0 {
61			compatible = "gpio-control-nand";
62			nand-on-flash-bbt;
63			nand-ecc-mode = "soft_bch";
64			nand-ecc-step-size = <512>;
65			nand-ecc-strength = <4>;
66			reg = <0x0 4>;
67			gpios = <&gpio2 0 0>, /* rdy */
68				<&gpio1 1 0>, /* nce */
69				<&gpio1 2 0>, /* ale */
70				<&gpio1 3 0>, /* cle */
71				<&gpio1 4 0>; /* nwp */
72		};
73
74		serial@80000 {
75			compatible = "ns16550a";
76			reg = <0x80000 0x1000>;
77			interrupt-parent = <&cpu_intc>;
78			interrupts = <6>;
79			clocks = <&baseclk>;
80			reg-shift = <0>;
81		};
82
83		ethernet@40000 {
84			compatible = "snps,dwmac-4.10a";
85			interrupt-parent = <&cpu_intc>;
86			interrupts = <5>;
87			interrupt-names = "macirq";
88			reg = <0x40000 0x2000>;
89			clock-names = "stmmaceth", "pclk";
90			clocks = <&baseclk>, <&baseclk>;
91
92			phy-mode = "rgmii";
93
94			fixed-link {
95				speed = <1000>;
96				full-duplex;
97			};
98		};
99	};
100};
101