xref: /linux/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi (revision 6beeaf48db6c548fcfc2ad32739d33af2fef3a5b) 
1// SPDX-License-Identifier: GPL-2.0
2
3/dts-v1/;
4
5#include <dt-bindings/interrupt-controller/irq.h>
6
7/ {
8	compatible = "loongson,loongson2k1000";
9
10	#address-cells = <2>;
11	#size-cells = <2>;
12
13	cpus {
14		#address-cells = <1>;
15		#size-cells = <0>;
16
17		cpu0: cpu@0 {
18			device_type = "cpu";
19			compatible = "loongson,gs264";
20			reg = <0x0>;
21			#clock-cells = <1>;
22			clocks = <&cpu_clk>;
23		};
24	};
25
26	memory@200000 {
27		compatible = "memory";
28		device_type = "memory";
29		reg = <0x00000000 0x00200000 0x00000000 0x0ee00000>, /* 238 MB at 2 MB */
30			<0x00000000 0x20000000 0x00000000 0x1f000000>, /* 496 MB at 512 MB */
31			<0x00000001 0x10000000 0x00000001 0xb0000000>; /* 6912 MB at 4352MB */
32	};
33
34	cpu_clk: cpu_clk {
35		#clock-cells = <0>;
36		compatible = "fixed-clock";
37		clock-frequency = <800000000>;
38	};
39
40	cpuintc: interrupt-controller {
41		#address-cells = <0>;
42		#interrupt-cells = <1>;
43		interrupt-controller;
44		compatible = "mti,cpu-interrupt-controller";
45	};
46
47	package0: bus@10000000 {
48		compatible = "simple-bus";
49		#address-cells = <2>;
50		#size-cells = <2>;
51		ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* ioports */
52			0 0x40000000 0 0x40000000 0 0x40000000
53			0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
54
55		liointc0: interrupt-controller@1fe11400 {
56			compatible = "loongson,liointc-2.0";
57			reg = <0 0x1fe11400 0 0x40>,
58				<0 0x1fe11040 0 0x8>,
59				<0 0x1fe11140 0 0x8>;
60			reg-names = "main", "isr0", "isr1";
61
62			interrupt-controller;
63			#interrupt-cells = <2>;
64
65			interrupt-parent = <&cpuintc>;
66			interrupts = <2>;
67			interrupt-names = "int0";
68
69			loongson,parent_int_map = <0xffffffff>, /* int0 */
70						<0x00000000>, /* int1 */
71						<0x00000000>, /* int2 */
72						<0x00000000>; /* int3 */
73		};
74
75		liointc1: interrupt-controller@1fe11440 {
76			compatible = "loongson,liointc-2.0";
77			reg = <0 0x1fe11440 0 0x40>,
78				<0 0x1fe11048 0 0x8>,
79				<0 0x1fe11148 0 0x8>;
80			reg-names = "main", "isr0", "isr1";
81
82			interrupt-controller;
83			#interrupt-cells = <2>;
84
85			interrupt-parent = <&cpuintc>;
86			interrupts = <3>;
87			interrupt-names = "int1";
88
89			loongson,parent_int_map = <0x00000000>, /* int0 */
90						<0xffffffff>, /* int1 */
91						<0x00000000>, /* int2 */
92						<0x00000000>; /* int3 */
93		};
94
95		uart0: serial@1fe00000 {
96			compatible = "ns16550a";
97			reg = <0 0x1fe00000 0 0x8>;
98			clock-frequency = <125000000>;
99			interrupt-parent = <&liointc0>;
100			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
101			no-loopback-test;
102		};
103
104		pci@1a000000 {
105			compatible = "loongson,ls2k-pci";
106			device_type = "pci";
107			#address-cells = <3>;
108			#size-cells = <2>;
109			#interrupt-cells = <2>;
110
111			reg = <0 0x1a000000 0 0x02000000>,
112				<0xfe 0x00000000 0 0x20000000>;
113
114			ranges = <0x01000000 0x0 0x00000000 0x0 0x18000000  0x0 0x00010000>,
115				 <0x02000000 0x0 0x40000000 0x0 0x40000000  0x0 0x40000000>;
116
117			gmac@3,0 {
118				compatible = "pci0014,7a03.0",
119						   "pci0014,7a03",
120						   "pciclass0c0320",
121						   "pciclass0c03",
122						   "loongson, pci-gmac";
123
124				reg = <0x1800 0x0 0x0 0x0 0x0>;
125				interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
126					     <13 IRQ_TYPE_LEVEL_LOW>;
127				interrupt-names = "macirq", "eth_lpi";
128				interrupt-parent = <&liointc0>;
129				phy-mode = "rgmii";
130				mdio {
131					#address-cells = <1>;
132					#size-cells = <0>;
133					compatible = "snps,dwmac-mdio";
134					phy0: ethernet-phy@0 {
135						reg = <0>;
136					};
137				};
138			};
139
140			gmac@3,1 {
141				compatible = "pci0014,7a03.0",
142						   "pci0014,7a03",
143						   "pciclass0c0320",
144						   "pciclass0c03",
145						   "loongson, pci-gmac";
146
147				reg = <0x1900 0x0 0x0 0x0 0x0>;
148				interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
149					     <15 IRQ_TYPE_LEVEL_LOW>;
150				interrupt-names = "macirq", "eth_lpi";
151				interrupt-parent = <&liointc0>;
152				phy-mode = "rgmii";
153				mdio {
154					#address-cells = <1>;
155					#size-cells = <0>;
156					compatible = "snps,dwmac-mdio";
157					phy1: ethernet-phy@1 {
158						reg = <0>;
159					};
160				};
161			};
162
163			ehci@4,1 {
164				compatible = "pci0014,7a14.0",
165						   "pci0014,7a14",
166						   "pciclass0c0320",
167						   "pciclass0c03";
168
169				reg = <0x2100 0x0 0x0 0x0 0x0>;
170				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
171				interrupt-parent = <&liointc1>;
172			};
173
174			ohci@4,2 {
175				compatible = "pci0014,7a24.0",
176						   "pci0014,7a24",
177						   "pciclass0c0310",
178						   "pciclass0c03";
179
180				reg = <0x2200 0x0 0x0 0x0 0x0>;
181				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
182				interrupt-parent = <&liointc1>;
183			};
184
185			sata@8,0 {
186				compatible = "pci0014,7a08.0",
187						   "pci0014,7a08",
188						   "pciclass010601",
189						   "pciclass0106";
190
191				reg = <0x4000 0x0 0x0 0x0 0x0>;
192				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
193				interrupt-parent = <&liointc0>;
194			};
195
196			pci_bridge@9,0 {
197				compatible = "pci0014,7a19.0",
198						   "pci0014,7a19",
199						   "pciclass060400",
200						   "pciclass0604";
201
202				reg = <0x4800 0x0 0x0 0x0 0x0>;
203				#interrupt-cells = <1>;
204				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
205				interrupt-parent = <&liointc1>;
206				interrupt-map-mask = <0 0 0 0>;
207				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
208				external-facing;
209			};
210
211			pci_bridge@a,0 {
212				compatible = "pci0014,7a09.0",
213						   "pci0014,7a09",
214						   "pciclass060400",
215						   "pciclass0604";
216
217				reg = <0x5000 0x0 0x0 0x0 0x0>;
218				#interrupt-cells = <1>;
219				interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
220				interrupt-parent = <&liointc1>;
221				interrupt-map-mask = <0 0 0 0>;
222				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
223				external-facing;
224			};
225
226			pci_bridge@b,0 {
227				compatible = "pci0014,7a09.0",
228						   "pci0014,7a09",
229						   "pciclass060400",
230						   "pciclass0604";
231
232				reg = <0x5800 0x0 0x0 0x0 0x0>;
233				#interrupt-cells = <1>;
234				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
235				interrupt-parent = <&liointc1>;
236				interrupt-map-mask = <0 0 0 0>;
237				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
238				external-facing;
239			};
240
241			pci_bridge@c,0 {
242				compatible = "pci0014,7a09.0",
243						   "pci0014,7a09",
244						   "pciclass060400",
245						   "pciclass0604";
246
247				reg = <0x6000 0x0 0x0 0x0 0x0>;
248				#interrupt-cells = <1>;
249				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
250				interrupt-parent = <&liointc1>;
251				interrupt-map-mask = <0 0 0 0>;
252				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
253				external-facing;
254			};
255
256			pci_bridge@d,0 {
257				compatible = "pci0014,7a19.0",
258						   "pci0014,7a19",
259						   "pciclass060400",
260						   "pciclass0604";
261
262				reg = <0x6800 0x0 0x0 0x0 0x0>;
263				#interrupt-cells = <1>;
264				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
265				interrupt-parent = <&liointc1>;
266				interrupt-map-mask = <0 0 0 0>;
267				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
268				external-facing;
269			};
270
271			pci_bridge@e,0 {
272				compatible = "pci0014,7a09.0",
273						   "pci0014,7a09",
274						   "pciclass060400",
275						   "pciclass0604";
276
277				reg = <0x7000 0x0 0x0 0x0 0x0>;
278				#interrupt-cells = <1>;
279				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
280				interrupt-parent = <&liointc1>;
281				interrupt-map-mask = <0 0 0 0>;
282				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
283				external-facing;
284			};
285
286		};
287	};
288};
289
290