xref: /linux/arch/mips/boot/dts/brcm/bcm7435.dtsi (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1/ {
2	#address-cells = <1>;
3	#size-cells = <1>;
4	compatible = "brcm,bcm7435";
5
6	cpus {
7		#address-cells = <1>;
8		#size-cells = <0>;
9
10		mips-hpt-frequency = <163125000>;
11
12		cpu@0 {
13			compatible = "brcm,bmips5200";
14			device_type = "cpu";
15			reg = <0>;
16		};
17
18		cpu@1 {
19			compatible = "brcm,bmips5200";
20			device_type = "cpu";
21			reg = <1>;
22		};
23
24		cpu@2 {
25			compatible = "brcm,bmips5200";
26			device_type = "cpu";
27			reg = <2>;
28		};
29
30		cpu@3 {
31			compatible = "brcm,bmips5200";
32			device_type = "cpu";
33			reg = <3>;
34		};
35	};
36
37	aliases {
38		uart0 = &uart0;
39	};
40
41	cpu_intc: cpu_intc {
42		#address-cells = <0>;
43		compatible = "mti,cpu-interrupt-controller";
44
45		interrupt-controller;
46		#interrupt-cells = <1>;
47	};
48
49	clocks {
50		uart_clk: uart_clk {
51			compatible = "fixed-clock";
52			#clock-cells = <0>;
53			clock-frequency = <81000000>;
54		};
55	};
56
57	rdb {
58		#address-cells = <1>;
59		#size-cells = <1>;
60
61		compatible = "simple-bus";
62		ranges = <0 0x10000000 0x01000000>;
63
64		periph_intc: periph_intc@41b500 {
65			compatible = "brcm,bcm7038-l1-intc";
66			reg = <0x41b500 0x40>, <0x41b600 0x40>;
67
68			interrupt-controller;
69			#interrupt-cells = <1>;
70
71			interrupt-parent = <&cpu_intc>;
72			interrupts = <2>, <3>;
73		};
74
75		sun_l2_intc: sun_l2_intc@403000 {
76			compatible = "brcm,l2-intc";
77			reg = <0x403000 0x30>;
78			interrupt-controller;
79			#interrupt-cells = <1>;
80			interrupt-parent = <&periph_intc>;
81			interrupts = <52>;
82		};
83
84		gisb-arb@400000 {
85			compatible = "brcm,bcm7400-gisb-arb";
86			reg = <0x400000 0xdc>;
87			native-endian;
88			interrupt-parent = <&sun_l2_intc>;
89			interrupts = <0>, <2>;
90			brcm,gisb-arb-master-mask = <0xf77f>;
91			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0",
92						     "pcie_0", "bsp_0",
93						     "rdc_0", "raaga_0",
94						     "avd_1", "jtag_0",
95						     "svd_0", "vice_0",
96						     "vice_1", "raaga_1",
97						     "scpu";
98		};
99
100		upg_irq0_intc: upg_irq0_intc@406780 {
101			compatible = "brcm,bcm7120-l2-intc";
102			reg = <0x406780 0x8>;
103
104			brcm,int-map-mask = <0x44>;
105			brcm,int-fwd-mask = <0x70000>;
106
107			interrupt-controller;
108			#interrupt-cells = <1>;
109
110			interrupt-parent = <&periph_intc>;
111			interrupts = <60>;
112		};
113
114		sun_top_ctrl: syscon@404000 {
115			compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
116			reg = <0x404000 0x51c>;
117			little-endian;
118		};
119
120		reboot {
121			compatible = "brcm,brcmstb-reboot";
122			syscon = <&sun_top_ctrl 0x304 0x308>;
123		};
124
125		uart0: serial@406b00 {
126			compatible = "ns16550a";
127			reg = <0x406b00 0x20>;
128			reg-io-width = <0x4>;
129			reg-shift = <0x2>;
130			interrupt-parent = <&periph_intc>;
131			interrupts = <66>;
132			clocks = <&uart_clk>;
133			status = "disabled";
134		};
135
136		enet0: ethernet@b80000 {
137			phy-mode = "internal";
138			phy-handle = <&phy1>;
139			mac-address = [ 00 10 18 36 23 1a ];
140			compatible = "brcm,genet-v3";
141			#address-cells = <0x1>;
142			#size-cells = <0x1>;
143			reg = <0xb80000 0x11c88>;
144			interrupts = <17>, <18>;
145			interrupt-parent = <&periph_intc>;
146			status = "disabled";
147
148			mdio@e14 {
149				compatible = "brcm,genet-mdio-v3";
150				#address-cells = <0x1>;
151				#size-cells = <0x0>;
152				reg = <0xe14 0x8>;
153
154				phy1: ethernet-phy@1 {
155					max-speed = <100>;
156					reg = <0x1>;
157					compatible = "brcm,40nm-ephy",
158						"ethernet-phy-ieee802.3-c22";
159				};
160			};
161		};
162
163		ehci0: usb@480300 {
164			compatible = "brcm,bcm7435-ehci", "generic-ehci";
165			reg = <0x480300 0x100>;
166			native-endian;
167			interrupt-parent = <&periph_intc>;
168			interrupts = <70>;
169			status = "disabled";
170		};
171
172		ohci0: usb@480400 {
173			compatible = "brcm,bcm7435-ohci", "generic-ohci";
174			reg = <0x480400 0x100>;
175			native-endian;
176			no-big-frame-no;
177			interrupt-parent = <&periph_intc>;
178			interrupts = <72>;
179			status = "disabled";
180		};
181
182		ehci1: usb@480500 {
183			compatible = "brcm,bcm7435-ehci", "generic-ehci";
184			reg = <0x480500 0x100>;
185			native-endian;
186			interrupt-parent = <&periph_intc>;
187			interrupts = <71>;
188			status = "disabled";
189		};
190
191		ohci1: usb@480600 {
192			compatible = "brcm,bcm7435-ohci", "generic-ohci";
193			reg = <0x480600 0x100>;
194			native-endian;
195			no-big-frame-no;
196			interrupt-parent = <&periph_intc>;
197			interrupts = <73>;
198			status = "disabled";
199		};
200
201		ehci2: usb@490300 {
202			compatible = "brcm,bcm7435-ehci", "generic-ehci";
203			reg = <0x490300 0x100>;
204			native-endian;
205			interrupt-parent = <&periph_intc>;
206			interrupts = <75>;
207			status = "disabled";
208		};
209
210		ohci2: usb@490400 {
211			compatible = "brcm,bcm7435-ohci", "generic-ohci";
212			reg = <0x490400 0x100>;
213			native-endian;
214			no-big-frame-no;
215			interrupt-parent = <&periph_intc>;
216			interrupts = <77>;
217			status = "disabled";
218		};
219
220		ehci3: usb@490500 {
221			compatible = "brcm,bcm7435-ehci", "generic-ehci";
222			reg = <0x490500 0x100>;
223			native-endian;
224			interrupt-parent = <&periph_intc>;
225			interrupts = <76>;
226			status = "disabled";
227		};
228
229		ohci3: usb@490600 {
230			compatible = "brcm,bcm7435-ohci", "generic-ohci";
231			reg = <0x490600 0x100>;
232			native-endian;
233			no-big-frame-no;
234			interrupt-parent = <&periph_intc>;
235			interrupts = <78>;
236			status = "disabled";
237		};
238	};
239};
240