xref: /linux/arch/mips/boot/dts/brcm/bcm7425.dtsi (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1/ {
2	#address-cells = <1>;
3	#size-cells = <1>;
4	compatible = "brcm,bcm7425";
5
6	cpus {
7		#address-cells = <1>;
8		#size-cells = <0>;
9
10		mips-hpt-frequency = <163125000>;
11
12		cpu@0 {
13			compatible = "brcm,bmips5000";
14			device_type = "cpu";
15			reg = <0>;
16		};
17
18		cpu@1 {
19			compatible = "brcm,bmips5000";
20			device_type = "cpu";
21			reg = <1>;
22		};
23	};
24
25	aliases {
26		uart0 = &uart0;
27	};
28
29	cpu_intc: cpu_intc {
30		#address-cells = <0>;
31		compatible = "mti,cpu-interrupt-controller";
32
33		interrupt-controller;
34		#interrupt-cells = <1>;
35	};
36
37	clocks {
38		uart_clk: uart_clk {
39			compatible = "fixed-clock";
40			#clock-cells = <0>;
41			clock-frequency = <81000000>;
42		};
43	};
44
45	rdb {
46		#address-cells = <1>;
47		#size-cells = <1>;
48
49		compatible = "simple-bus";
50		ranges = <0 0x10000000 0x01000000>;
51
52		periph_intc: periph_intc@41a400 {
53			compatible = "brcm,bcm7038-l1-intc";
54			reg = <0x41a400 0x30>, <0x41a600 0x30>;
55
56			interrupt-controller;
57			#interrupt-cells = <1>;
58
59			interrupt-parent = <&cpu_intc>;
60			interrupts = <2>, <3>;
61		};
62
63		sun_l2_intc: sun_l2_intc@403000 {
64			compatible = "brcm,l2-intc";
65			reg = <0x403000 0x30>;
66			interrupt-controller;
67			#interrupt-cells = <1>;
68			interrupt-parent = <&periph_intc>;
69			interrupts = <47>;
70		};
71
72		gisb-arb@400000 {
73			compatible = "brcm,bcm7400-gisb-arb";
74			reg = <0x400000 0xdc>;
75			native-endian;
76			interrupt-parent = <&sun_l2_intc>;
77			interrupts = <0>, <2>;
78			brcm,gisb-arb-master-mask = <0x177b>;
79			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0",
80						     "bsp_0", "rdc_0",
81						     "raaga_0", "avd_1",
82						     "jtag_0", "svd_0",
83						     "vice_0";
84		};
85
86		upg_irq0_intc: upg_irq0_intc@406780 {
87			compatible = "brcm,bcm7120-l2-intc";
88			reg = <0x406780 0x8>;
89
90			brcm,int-map-mask = <0x44>;
91			brcm,int-fwd-mask = <0x70000>;
92
93			interrupt-controller;
94			#interrupt-cells = <1>;
95
96			interrupt-parent = <&periph_intc>;
97			interrupts = <55>;
98		};
99
100		sun_top_ctrl: syscon@404000 {
101			compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
102			reg = <0x404000 0x51c>;
103			little-endian;
104		};
105
106		reboot {
107			compatible = "brcm,brcmstb-reboot";
108			syscon = <&sun_top_ctrl 0x304 0x308>;
109		};
110
111		uart0: serial@406b00 {
112			compatible = "ns16550a";
113			reg = <0x406b00 0x20>;
114			reg-io-width = <0x4>;
115			reg-shift = <0x2>;
116			interrupt-parent = <&periph_intc>;
117			interrupts = <61>;
118			clocks = <&uart_clk>;
119			status = "disabled";
120		};
121
122		enet0: ethernet@b80000 {
123			phy-mode = "internal";
124			phy-handle = <&phy1>;
125			mac-address = [ 00 10 18 36 23 1a ];
126			compatible = "brcm,genet-v3";
127			#address-cells = <0x1>;
128			#size-cells = <0x1>;
129			reg = <0xb80000 0x11c88>;
130			interrupts = <17>, <18>;
131			interrupt-parent = <&periph_intc>;
132			status = "disabled";
133
134			mdio@e14 {
135				compatible = "brcm,genet-mdio-v3";
136				#address-cells = <0x1>;
137				#size-cells = <0x0>;
138				reg = <0xe14 0x8>;
139
140				phy1: ethernet-phy@1 {
141					max-speed = <100>;
142					reg = <0x1>;
143					compatible = "brcm,40nm-ephy",
144						"ethernet-phy-ieee802.3-c22";
145				};
146			};
147		};
148
149		ehci0: usb@480300 {
150			compatible = "brcm,bcm7425-ehci", "generic-ehci";
151			reg = <0x480300 0x100>;
152			native-endian;
153			interrupt-parent = <&periph_intc>;
154			interrupts = <65>;
155			status = "disabled";
156		};
157
158		ohci0: usb@480400 {
159			compatible = "brcm,bcm7425-ohci", "generic-ohci";
160			reg = <0x480400 0x100>;
161			native-endian;
162			no-big-frame-no;
163			interrupt-parent = <&periph_intc>;
164			interrupts = <67>;
165			status = "disabled";
166		};
167
168		ehci1: usb@480500 {
169			compatible = "brcm,bcm7425-ehci", "generic-ehci";
170			reg = <0x480500 0x100>;
171			native-endian;
172			interrupt-parent = <&periph_intc>;
173			interrupts = <66>;
174			status = "disabled";
175		};
176
177		ohci1: usb@480600 {
178			compatible = "brcm,bcm7425-ohci", "generic-ohci";
179			reg = <0x480600 0x100>;
180			native-endian;
181			no-big-frame-no;
182			interrupt-parent = <&periph_intc>;
183			interrupts = <68>;
184			status = "disabled";
185		};
186
187		ehci2: usb@490300 {
188			compatible = "brcm,bcm7425-ehci", "generic-ehci";
189			reg = <0x490300 0x100>;
190			native-endian;
191			interrupt-parent = <&periph_intc>;
192			interrupts = <70>;
193			status = "disabled";
194		};
195
196		ohci2: usb@490400 {
197			compatible = "brcm,bcm7425-ohci", "generic-ohci";
198			reg = <0x490400 0x100>;
199			native-endian;
200			no-big-frame-no;
201			interrupt-parent = <&periph_intc>;
202			interrupts = <72>;
203			status = "disabled";
204		};
205
206		ehci3: usb@490500 {
207			compatible = "brcm,bcm7425-ehci", "generic-ehci";
208			reg = <0x490500 0x100>;
209			native-endian;
210			interrupt-parent = <&periph_intc>;
211			interrupts = <71>;
212			status = "disabled";
213		};
214
215		ohci3: usb@490600 {
216			compatible = "brcm,bcm7425-ohci", "generic-ohci";
217			reg = <0x490600 0x100>;
218			native-endian;
219			no-big-frame-no;
220			interrupt-parent = <&periph_intc>;
221			interrupts = <73>;
222			status = "disabled";
223		};
224	};
225};
226