1/ { 2 #address-cells = <1>; 3 #size-cells = <1>; 4 compatible = "brcm,bcm7360"; 5 6 cpus { 7 #address-cells = <1>; 8 #size-cells = <0>; 9 10 mips-hpt-frequency = <375000000>; 11 12 cpu@0 { 13 compatible = "brcm,bmips3300"; 14 device_type = "cpu"; 15 reg = <0>; 16 }; 17 }; 18 19 aliases { 20 uart0 = &uart0; 21 uart1 = &uart1; 22 uart2 = &uart2; 23 }; 24 25 cpu_intc: cpu_intc { 26 #address-cells = <0>; 27 compatible = "mti,cpu-interrupt-controller"; 28 29 interrupt-controller; 30 #interrupt-cells = <1>; 31 }; 32 33 clocks { 34 uart_clk: uart_clk { 35 compatible = "fixed-clock"; 36 #clock-cells = <0>; 37 clock-frequency = <81000000>; 38 }; 39 }; 40 41 rdb { 42 #address-cells = <1>; 43 #size-cells = <1>; 44 45 compatible = "simple-bus"; 46 ranges = <0 0x10000000 0x01000000>; 47 48 periph_intc: periph_intc@411400 { 49 compatible = "brcm,bcm7038-l1-intc"; 50 reg = <0x411400 0x30>; 51 52 interrupt-controller; 53 #interrupt-cells = <1>; 54 55 interrupt-parent = <&cpu_intc>; 56 interrupts = <2>; 57 }; 58 59 sun_l2_intc: sun_l2_intc@403000 { 60 compatible = "brcm,l2-intc"; 61 reg = <0x403000 0x30>; 62 interrupt-controller; 63 #interrupt-cells = <1>; 64 interrupt-parent = <&periph_intc>; 65 interrupts = <48>; 66 }; 67 68 gisb-arb@400000 { 69 compatible = "brcm,bcm7400-gisb-arb"; 70 reg = <0x400000 0xdc>; 71 native-endian; 72 interrupt-parent = <&sun_l2_intc>; 73 interrupts = <0>, <2>; 74 brcm,gisb-arb-master-mask = <0x2f3>; 75 brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", 76 "rdc_0", "raaga_0", 77 "avd_0", "jtag_0"; 78 }; 79 80 upg_irq0_intc: upg_irq0_intc@406600 { 81 compatible = "brcm,bcm7120-l2-intc"; 82 reg = <0x406600 0x8>; 83 84 brcm,int-map-mask = <0x44>, <0x7000000>; 85 brcm,int-fwd-mask = <0x70000>; 86 87 interrupt-controller; 88 #interrupt-cells = <1>; 89 90 interrupt-parent = <&periph_intc>; 91 interrupts = <56>, <54>; 92 interrupt-names = "upg_main", "upg_bsc"; 93 }; 94 95 upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { 96 compatible = "brcm,bcm7120-l2-intc"; 97 reg = <0x408b80 0x8>; 98 99 brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; 100 brcm,int-fwd-mask = <0>; 101 brcm,irq-can-wake; 102 103 interrupt-controller; 104 #interrupt-cells = <1>; 105 106 interrupt-parent = <&periph_intc>; 107 interrupts = <57>, <55>, <59>; 108 interrupt-names = "upg_main_aon", "upg_bsc_aon", 109 "upg_spi"; 110 }; 111 112 sun_top_ctrl: syscon@404000 { 113 compatible = "brcm,bcm7360-sun-top-ctrl", "syscon"; 114 reg = <0x404000 0x51c>; 115 native-endian; 116 }; 117 118 reboot { 119 compatible = "brcm,brcmstb-reboot"; 120 syscon = <&sun_top_ctrl 0x304 0x308>; 121 }; 122 123 uart0: serial@406800 { 124 compatible = "ns16550a"; 125 reg = <0x406800 0x20>; 126 reg-io-width = <0x4>; 127 reg-shift = <0x2>; 128 native-endian; 129 interrupt-parent = <&periph_intc>; 130 interrupts = <61>; 131 clocks = <&uart_clk>; 132 status = "disabled"; 133 }; 134 135 uart1: serial@406840 { 136 compatible = "ns16550a"; 137 reg = <0x406840 0x20>; 138 reg-io-width = <0x4>; 139 reg-shift = <0x2>; 140 native-endian; 141 interrupt-parent = <&periph_intc>; 142 interrupts = <62>; 143 clocks = <&uart_clk>; 144 status = "disabled"; 145 }; 146 147 uart2: serial@406880 { 148 compatible = "ns16550a"; 149 reg = <0x406880 0x20>; 150 reg-io-width = <0x4>; 151 reg-shift = <0x2>; 152 native-endian; 153 interrupt-parent = <&periph_intc>; 154 interrupts = <63>; 155 clocks = <&uart_clk>; 156 status = "disabled"; 157 }; 158 159 bsca: i2c@406200 { 160 clock-frequency = <390000>; 161 compatible = "brcm,brcmstb-i2c"; 162 interrupt-parent = <&upg_irq0_intc>; 163 reg = <0x406200 0x58>; 164 interrupts = <24>; 165 interrupt-names = "upg_bsca"; 166 status = "disabled"; 167 }; 168 169 bscb: i2c@406280 { 170 clock-frequency = <390000>; 171 compatible = "brcm,brcmstb-i2c"; 172 interrupt-parent = <&upg_irq0_intc>; 173 reg = <0x406280 0x58>; 174 interrupts = <25>; 175 interrupt-names = "upg_bscb"; 176 status = "disabled"; 177 }; 178 179 bscc: i2c@406300 { 180 clock-frequency = <390000>; 181 compatible = "brcm,brcmstb-i2c"; 182 interrupt-parent = <&upg_irq0_intc>; 183 reg = <0x406300 0x58>; 184 interrupts = <26>; 185 interrupt-names = "upg_bscc"; 186 status = "disabled"; 187 }; 188 189 bscd: i2c@408980 { 190 clock-frequency = <390000>; 191 compatible = "brcm,brcmstb-i2c"; 192 interrupt-parent = <&upg_aon_irq0_intc>; 193 reg = <0x408980 0x58>; 194 interrupts = <27>; 195 interrupt-names = "upg_bscd"; 196 status = "disabled"; 197 }; 198 199 enet0: ethernet@430000 { 200 phy-mode = "internal"; 201 phy-handle = <&phy1>; 202 mac-address = [ 00 10 18 36 23 1a ]; 203 compatible = "brcm,genet-v2"; 204 #address-cells = <0x1>; 205 #size-cells = <0x1>; 206 reg = <0x430000 0x4c8c>; 207 interrupts = <24>, <25>; 208 interrupt-parent = <&periph_intc>; 209 status = "disabled"; 210 211 mdio@e14 { 212 compatible = "brcm,genet-mdio-v2"; 213 #address-cells = <0x1>; 214 #size-cells = <0x0>; 215 reg = <0xe14 0x8>; 216 217 phy1: ethernet-phy@1 { 218 max-speed = <100>; 219 reg = <0x1>; 220 compatible = "brcm,40nm-ephy", 221 "ethernet-phy-ieee802.3-c22"; 222 }; 223 }; 224 }; 225 226 ehci0: usb@480300 { 227 compatible = "brcm,bcm7360-ehci", "generic-ehci"; 228 reg = <0x480300 0x100>; 229 native-endian; 230 interrupt-parent = <&periph_intc>; 231 interrupts = <65>; 232 status = "disabled"; 233 }; 234 235 ohci0: usb@480400 { 236 compatible = "brcm,bcm7360-ohci", "generic-ohci"; 237 reg = <0x480400 0x100>; 238 native-endian; 239 no-big-frame-no; 240 interrupt-parent = <&periph_intc>; 241 interrupts = <66>; 242 status = "disabled"; 243 }; 244 }; 245}; 246