1/ { 2 #address-cells = <1>; 3 #size-cells = <1>; 4 compatible = "brcm,bcm7346"; 5 6 cpus { 7 #address-cells = <1>; 8 #size-cells = <0>; 9 10 mips-hpt-frequency = <163125000>; 11 12 cpu@0 { 13 compatible = "brcm,bmips5000"; 14 device_type = "cpu"; 15 reg = <0>; 16 }; 17 18 cpu@1 { 19 compatible = "brcm,bmips5000"; 20 device_type = "cpu"; 21 reg = <1>; 22 }; 23 }; 24 25 aliases { 26 uart0 = &uart0; 27 uart1 = &uart1; 28 uart2 = &uart2; 29 }; 30 31 cpu_intc: cpu_intc { 32 #address-cells = <0>; 33 compatible = "mti,cpu-interrupt-controller"; 34 35 interrupt-controller; 36 #interrupt-cells = <1>; 37 }; 38 39 clocks { 40 uart_clk: uart_clk { 41 compatible = "fixed-clock"; 42 #clock-cells = <0>; 43 clock-frequency = <81000000>; 44 }; 45 }; 46 47 rdb { 48 #address-cells = <1>; 49 #size-cells = <1>; 50 51 compatible = "simple-bus"; 52 ranges = <0 0x10000000 0x01000000>; 53 54 periph_intc: periph_intc@411400 { 55 compatible = "brcm,bcm7038-l1-intc"; 56 reg = <0x411400 0x30>, <0x411600 0x30>; 57 58 interrupt-controller; 59 #interrupt-cells = <1>; 60 61 interrupt-parent = <&cpu_intc>; 62 interrupts = <2>, <3>; 63 }; 64 65 sun_l2_intc: sun_l2_intc@403000 { 66 compatible = "brcm,l2-intc"; 67 reg = <0x403000 0x30>; 68 interrupt-controller; 69 #interrupt-cells = <1>; 70 interrupt-parent = <&periph_intc>; 71 interrupts = <51>; 72 }; 73 74 gisb-arb@400000 { 75 compatible = "brcm,bcm7400-gisb-arb"; 76 reg = <0x400000 0xdc>; 77 native-endian; 78 interrupt-parent = <&sun_l2_intc>; 79 interrupts = <0>, <2>; 80 brcm,gisb-arb-master-mask = <0x673>; 81 brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", 82 "rdc_0", "raaga_0", 83 "jtag_0", "svd_0"; 84 }; 85 86 upg_irq0_intc: upg_irq0_intc@406780 { 87 compatible = "brcm,bcm7120-l2-intc"; 88 reg = <0x406780 0x8>; 89 90 brcm,int-map-mask = <0x44>; 91 brcm,int-fwd-mask = <0x70000>; 92 93 interrupt-controller; 94 #interrupt-cells = <1>; 95 96 interrupt-parent = <&periph_intc>; 97 interrupts = <59>; 98 }; 99 100 sun_top_ctrl: syscon@404000 { 101 compatible = "brcm,bcm7346-sun-top-ctrl", "syscon"; 102 reg = <0x404000 0x51c>; 103 little-endian; 104 }; 105 106 reboot { 107 compatible = "brcm,brcmstb-reboot"; 108 syscon = <&sun_top_ctrl 0x304 0x308>; 109 }; 110 111 uart0: serial@406900 { 112 compatible = "ns16550a"; 113 reg = <0x406900 0x20>; 114 reg-io-width = <0x4>; 115 reg-shift = <0x2>; 116 native-endian; 117 interrupt-parent = <&periph_intc>; 118 interrupts = <64>; 119 clocks = <&uart_clk>; 120 status = "disabled"; 121 }; 122 123 uart1: serial@406940 { 124 compatible = "ns16550a"; 125 reg = <0x406940 0x20>; 126 reg-io-width = <0x4>; 127 reg-shift = <0x2>; 128 native-endian; 129 interrupt-parent = <&periph_intc>; 130 interrupts = <65>; 131 clocks = <&uart_clk>; 132 status = "disabled"; 133 }; 134 135 uart2: serial@406980 { 136 compatible = "ns16550a"; 137 reg = <0x406980 0x20>; 138 reg-io-width = <0x4>; 139 reg-shift = <0x2>; 140 native-endian; 141 interrupt-parent = <&periph_intc>; 142 interrupts = <66>; 143 clocks = <&uart_clk>; 144 status = "disabled"; 145 }; 146 147 enet0: ethernet@430000 { 148 phy-mode = "internal"; 149 phy-handle = <&phy1>; 150 mac-address = [ 00 10 18 36 23 1a ]; 151 compatible = "brcm,genet-v2"; 152 #address-cells = <0x1>; 153 #size-cells = <0x1>; 154 reg = <0x430000 0x4c8c>; 155 interrupts = <24>, <25>; 156 interrupt-parent = <&periph_intc>; 157 status = "disabled"; 158 159 mdio@e14 { 160 compatible = "brcm,genet-mdio-v2"; 161 #address-cells = <0x1>; 162 #size-cells = <0x0>; 163 reg = <0xe14 0x8>; 164 165 phy1: ethernet-phy@1 { 166 max-speed = <100>; 167 reg = <0x1>; 168 compatible = "brcm,40nm-ephy", 169 "ethernet-phy-ieee802.3-c22"; 170 }; 171 }; 172 }; 173 174 ehci0: usb@480300 { 175 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 176 reg = <0x480300 0x100>; 177 native-endian; 178 interrupt-parent = <&periph_intc>; 179 interrupts = <68>; 180 status = "disabled"; 181 }; 182 183 ohci0: usb@480400 { 184 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 185 reg = <0x480400 0x100>; 186 native-endian; 187 no-big-frame-no; 188 interrupt-parent = <&periph_intc>; 189 interrupts = <70>; 190 status = "disabled"; 191 }; 192 193 ehci1: usb@480500 { 194 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 195 reg = <0x480500 0x100>; 196 native-endian; 197 interrupt-parent = <&periph_intc>; 198 interrupts = <69>; 199 status = "disabled"; 200 }; 201 202 ohci1: usb@480600 { 203 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 204 reg = <0x480600 0x100>; 205 native-endian; 206 no-big-frame-no; 207 interrupt-parent = <&periph_intc>; 208 interrupts = <71>; 209 status = "disabled"; 210 }; 211 212 ehci2: usb@490300 { 213 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 214 reg = <0x490300 0x100>; 215 native-endian; 216 interrupt-parent = <&periph_intc>; 217 interrupts = <73>; 218 status = "disabled"; 219 }; 220 221 ohci2: usb@490400 { 222 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 223 reg = <0x490400 0x100>; 224 native-endian; 225 no-big-frame-no; 226 interrupt-parent = <&periph_intc>; 227 interrupts = <75>; 228 status = "disabled"; 229 }; 230 231 ehci3: usb@490500 { 232 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 233 reg = <0x490500 0x100>; 234 native-endian; 235 interrupt-parent = <&periph_intc>; 236 interrupts = <74>; 237 status = "disabled"; 238 }; 239 240 ohci3: usb@490600 { 241 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 242 reg = <0x490600 0x100>; 243 native-endian; 244 no-big-frame-no; 245 interrupt-parent = <&periph_intc>; 246 interrupts = <76>; 247 status = "disabled"; 248 }; 249 }; 250}; 251