1/ { 2 #address-cells = <1>; 3 #size-cells = <1>; 4 compatible = "brcm,bcm6368"; 5 6 cpus { 7 #address-cells = <1>; 8 #size-cells = <0>; 9 10 mips-hpt-frequency = <200000000>; 11 12 cpu@0 { 13 compatible = "brcm,bmips4350"; 14 device_type = "cpu"; 15 reg = <0>; 16 }; 17 18 cpu@1 { 19 compatible = "brcm,bmips4350"; 20 device_type = "cpu"; 21 reg = <1>; 22 }; 23 }; 24 25 clocks { 26 periph_clk: periph-clk { 27 compatible = "fixed-clock"; 28 #clock-cells = <0>; 29 clock-frequency = <50000000>; 30 }; 31 }; 32 33 aliases { 34 serial0 = &uart0; 35 serial1 = &uart1; 36 }; 37 38 cpu_intc: interrupt-controller { 39 #address-cells = <0>; 40 compatible = "mti,cpu-interrupt-controller"; 41 42 interrupt-controller; 43 #interrupt-cells = <1>; 44 }; 45 46 ubus { 47 #address-cells = <1>; 48 #size-cells = <1>; 49 50 compatible = "simple-bus"; 51 ranges; 52 53 periph_cntl: syscon@10000000 { 54 compatible = "syscon"; 55 reg = <0x10000000 0x14>; 56 native-endian; 57 }; 58 59 reboot: syscon-reboot@10000008 { 60 compatible = "syscon-reboot"; 61 regmap = <&periph_cntl>; 62 offset = <0x8>; 63 mask = <0x1>; 64 }; 65 66 periph_intc: interrupt-controller@10000020 { 67 compatible = "brcm,bcm6345-l1-intc"; 68 reg = <0x10000020 0x10>, 69 <0x10000030 0x10>; 70 71 interrupt-controller; 72 #interrupt-cells = <1>; 73 74 interrupt-parent = <&cpu_intc>; 75 interrupts = <2>, <3>; 76 }; 77 78 leds0: led-controller@100000d0 { 79 #address-cells = <1>; 80 #size-cells = <0>; 81 compatible = "brcm,bcm6358-leds"; 82 reg = <0x100000d0 0x8>; 83 status = "disabled"; 84 }; 85 86 uart0: serial@10000100 { 87 compatible = "brcm,bcm6345-uart"; 88 reg = <0x10000100 0x18>; 89 interrupt-parent = <&periph_intc>; 90 interrupts = <2>; 91 clocks = <&periph_clk>; 92 status = "disabled"; 93 }; 94 95 uart1: serial@10000120 { 96 compatible = "brcm,bcm6345-uart"; 97 reg = <0x10000120 0x18>; 98 interrupt-parent = <&periph_intc>; 99 interrupts = <3>; 100 clocks = <&periph_clk>; 101 status = "disabled"; 102 }; 103 104 ehci: usb@10001500 { 105 compatible = "brcm,bcm6368-ehci", "generic-ehci"; 106 reg = <0x10001500 0x100>; 107 big-endian; 108 interrupt-parent = <&periph_intc>; 109 interrupts = <7>; 110 status = "disabled"; 111 }; 112 113 ohci: usb@10001600 { 114 compatible = "brcm,bcm6368-ohci", "generic-ohci"; 115 reg = <0x10001600 0x100>; 116 big-endian; 117 no-big-frame-no; 118 interrupt-parent = <&periph_intc>; 119 interrupts = <5>; 120 status = "disabled"; 121 }; 122 }; 123}; 124