1/ { 2 #address-cells = <1>; 3 #size-cells = <1>; 4 compatible = "brcm,bcm63268"; 5 6 cpus { 7 #address-cells = <1>; 8 #size-cells = <0>; 9 10 mips-hpt-frequency = <200000000>; 11 12 cpu@0 { 13 compatible = "brcm,bmips4350"; 14 device_type = "cpu"; 15 reg = <0>; 16 }; 17 18 cpu@1 { 19 compatible = "brcm,bmips4350"; 20 device_type = "cpu"; 21 reg = <1>; 22 }; 23 }; 24 25 clocks { 26 periph_clk: periph-clk { 27 compatible = "fixed-clock"; 28 #clock-cells = <0>; 29 clock-frequency = <50000000>; 30 }; 31 }; 32 33 aliases { 34 serial0 = &uart0; 35 serial1 = &uart1; 36 }; 37 38 cpu_intc: interrupt-controller { 39 #address-cells = <0>; 40 compatible = "mti,cpu-interrupt-controller"; 41 42 interrupt-controller; 43 #interrupt-cells = <1>; 44 }; 45 46 ubus { 47 #address-cells = <1>; 48 #size-cells = <1>; 49 50 compatible = "simple-bus"; 51 ranges; 52 53 periph_cntl: syscon@10000000 { 54 compatible = "syscon"; 55 reg = <0x10000000 0x14>; 56 native-endian; 57 }; 58 59 reboot: syscon-reboot@10000008 { 60 compatible = "syscon-reboot"; 61 regmap = <&periph_cntl>; 62 offset = <0x8>; 63 mask = <0x1>; 64 }; 65 66 periph_intc: interrupt-controller@10000020 { 67 compatible = "brcm,bcm6345-l1-intc"; 68 reg = <0x10000020 0x20>, 69 <0x10000040 0x20>; 70 71 interrupt-controller; 72 #interrupt-cells = <1>; 73 74 interrupt-parent = <&cpu_intc>; 75 interrupts = <2>, <3>; 76 }; 77 78 uart0: serial@10000180 { 79 compatible = "brcm,bcm6345-uart"; 80 reg = <0x10000180 0x18>; 81 82 interrupt-parent = <&periph_intc>; 83 interrupts = <5>; 84 85 clocks = <&periph_clk>; 86 87 status = "disabled"; 88 }; 89 90 uart1: serial@100001a0 { 91 compatible = "brcm,bcm6345-uart"; 92 reg = <0x100001a0 0x18>; 93 94 interrupt-parent = <&periph_intc>; 95 interrupts = <34>; 96 97 clocks = <&periph_clk>; 98 99 status = "disabled"; 100 }; 101 102 leds0: led-controller@10001900 { 103 #address-cells = <1>; 104 #size-cells = <0>; 105 compatible = "brcm,bcm6328-leds"; 106 reg = <0x10001900 0x24>; 107 108 status = "disabled"; 109 }; 110 111 ehci: usb@10002500 { 112 compatible = "brcm,bcm63268-ehci", "generic-ehci"; 113 reg = <0x10002500 0x100>; 114 big-endian; 115 116 interrupt-parent = <&periph_intc>; 117 interrupts = <10>; 118 119 status = "disabled"; 120 }; 121 122 ohci: usb@10002600 { 123 compatible = "brcm,bcm63268-ohci", "generic-ohci"; 124 reg = <0x10002600 0x100>; 125 big-endian; 126 no-big-frame-no; 127 128 interrupt-parent = <&periph_intc>; 129 interrupts = <9>; 130 131 status = "disabled"; 132 }; 133 }; 134}; 135