1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * DBAu1200/PBAu1200 board platform device registration 4 * 5 * Copyright (C) 2008-2011 Manuel Lauss 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/dma-mapping.h> 10 #include <linux/gpio.h> 11 #include <linux/i2c.h> 12 #include <linux/init.h> 13 #include <linux/interrupt.h> 14 #include <linux/io.h> 15 #include <linux/leds.h> 16 #include <linux/mmc/host.h> 17 #include <linux/mtd/mtd.h> 18 #include <linux/mtd/platnand.h> 19 #include <linux/platform_device.h> 20 #include <linux/serial_8250.h> 21 #include <linux/spi/spi.h> 22 #include <linux/spi/flash.h> 23 #include <linux/smc91x.h> 24 #include <linux/ata_platform.h> 25 #include <asm/mach-au1x00/au1000.h> 26 #include <asm/mach-au1x00/au1100_mmc.h> 27 #include <asm/mach-au1x00/au1xxx_dbdma.h> 28 #include <asm/mach-au1x00/au1xxx_psc.h> 29 #include <asm/mach-au1x00/au1200fb.h> 30 #include <asm/mach-au1x00/au1550_spi.h> 31 #include <asm/mach-db1x00/bcsr.h> 32 33 #include "platform.h" 34 35 #define BCSR_INT_IDE 0x0001 36 #define BCSR_INT_ETH 0x0002 37 #define BCSR_INT_PC0 0x0004 38 #define BCSR_INT_PC0STSCHG 0x0008 39 #define BCSR_INT_PC1 0x0010 40 #define BCSR_INT_PC1STSCHG 0x0020 41 #define BCSR_INT_DC 0x0040 42 #define BCSR_INT_FLASHBUSY 0x0080 43 #define BCSR_INT_PC0INSERT 0x0100 44 #define BCSR_INT_PC0EJECT 0x0200 45 #define BCSR_INT_PC1INSERT 0x0400 46 #define BCSR_INT_PC1EJECT 0x0800 47 #define BCSR_INT_SD0INSERT 0x1000 48 #define BCSR_INT_SD0EJECT 0x2000 49 #define BCSR_INT_SD1INSERT 0x4000 50 #define BCSR_INT_SD1EJECT 0x8000 51 52 #define DB1200_IDE_PHYS_ADDR 0x18800000 53 #define DB1200_IDE_REG_SHIFT 5 54 #define DB1200_IDE_PHYS_LEN (16 << DB1200_IDE_REG_SHIFT) 55 #define DB1200_ETH_PHYS_ADDR 0x19000300 56 #define DB1200_NAND_PHYS_ADDR 0x20000000 57 58 #define PB1200_IDE_PHYS_ADDR 0x0C800000 59 #define PB1200_ETH_PHYS_ADDR 0x0D000300 60 #define PB1200_NAND_PHYS_ADDR 0x1C000000 61 62 #define DB1200_INT_BEGIN (AU1000_MAX_INTR + 1) 63 #define DB1200_IDE_INT (DB1200_INT_BEGIN + 0) 64 #define DB1200_ETH_INT (DB1200_INT_BEGIN + 1) 65 #define DB1200_PC0_INT (DB1200_INT_BEGIN + 2) 66 #define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3) 67 #define DB1200_PC1_INT (DB1200_INT_BEGIN + 4) 68 #define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5) 69 #define DB1200_DC_INT (DB1200_INT_BEGIN + 6) 70 #define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7) 71 #define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8) 72 #define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9) 73 #define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10) 74 #define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11) 75 #define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12) 76 #define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13) 77 #define PB1200_SD1_INSERT_INT (DB1200_INT_BEGIN + 14) 78 #define PB1200_SD1_EJECT_INT (DB1200_INT_BEGIN + 15) 79 #define DB1200_INT_END (DB1200_INT_BEGIN + 15) 80 81 const char *get_system_type(void); 82 83 static int __init db1200_detect_board(void) 84 { 85 int bid; 86 87 /* try the DB1200 first */ 88 bcsr_init(DB1200_BCSR_PHYS_ADDR, 89 DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); 90 if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { 91 unsigned short t = bcsr_read(BCSR_HEXLEDS); 92 bcsr_write(BCSR_HEXLEDS, ~t); 93 if (bcsr_read(BCSR_HEXLEDS) != t) { 94 bcsr_write(BCSR_HEXLEDS, t); 95 return 0; 96 } 97 } 98 99 /* okay, try the PB1200 then */ 100 bcsr_init(PB1200_BCSR_PHYS_ADDR, 101 PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); 102 bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); 103 if ((bid == BCSR_WHOAMI_PB1200_DDR1) || 104 (bid == BCSR_WHOAMI_PB1200_DDR2)) { 105 unsigned short t = bcsr_read(BCSR_HEXLEDS); 106 bcsr_write(BCSR_HEXLEDS, ~t); 107 if (bcsr_read(BCSR_HEXLEDS) != t) { 108 bcsr_write(BCSR_HEXLEDS, t); 109 return 0; 110 } 111 } 112 113 return 1; /* it's neither */ 114 } 115 116 int __init db1200_board_setup(void) 117 { 118 unsigned short whoami; 119 120 if (db1200_detect_board()) 121 return -ENODEV; 122 123 whoami = bcsr_read(BCSR_WHOAMI); 124 switch (BCSR_WHOAMI_BOARD(whoami)) { 125 case BCSR_WHOAMI_PB1200_DDR1: 126 case BCSR_WHOAMI_PB1200_DDR2: 127 case BCSR_WHOAMI_DB1200: 128 break; 129 default: 130 return -ENODEV; 131 } 132 133 printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d" 134 " Board-ID %d Daughtercard ID %d\n", get_system_type(), 135 (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); 136 137 return 0; 138 } 139 140 /******************************************************************************/ 141 142 static u64 au1200_all_dmamask = DMA_BIT_MASK(32); 143 144 static struct mtd_partition db1200_spiflash_parts[] = { 145 { 146 .name = "spi_flash", 147 .offset = 0, 148 .size = MTDPART_SIZ_FULL, 149 }, 150 }; 151 152 static struct flash_platform_data db1200_spiflash_data = { 153 .name = "s25fl001", 154 .parts = db1200_spiflash_parts, 155 .nr_parts = ARRAY_SIZE(db1200_spiflash_parts), 156 .type = "m25p10", 157 }; 158 159 static struct spi_board_info db1200_spi_devs[] __initdata = { 160 { 161 /* TI TMP121AIDBVR temp sensor */ 162 .modalias = "tmp121", 163 .max_speed_hz = 2000000, 164 .bus_num = 0, 165 .chip_select = 0, 166 .mode = 0, 167 }, 168 { 169 /* Spansion S25FL001D0FMA SPI flash */ 170 .modalias = "m25p80", 171 .max_speed_hz = 50000000, 172 .bus_num = 0, 173 .chip_select = 1, 174 .mode = 0, 175 .platform_data = &db1200_spiflash_data, 176 }, 177 }; 178 179 static struct i2c_board_info db1200_i2c_devs[] __initdata = { 180 { I2C_BOARD_INFO("24c04", 0x52), }, /* AT24C04-10 I2C eeprom */ 181 { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ 182 { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */ 183 }; 184 185 /**********************************************************************/ 186 187 static void au1200_nand_cmd_ctrl(struct nand_chip *this, int cmd, 188 unsigned int ctrl) 189 { 190 unsigned long ioaddr = (unsigned long)this->legacy.IO_ADDR_W; 191 192 ioaddr &= 0xffffff00; 193 194 if (ctrl & NAND_CLE) { 195 ioaddr += MEM_STNAND_CMD; 196 } else if (ctrl & NAND_ALE) { 197 ioaddr += MEM_STNAND_ADDR; 198 } else { 199 /* assume we want to r/w real data by default */ 200 ioaddr += MEM_STNAND_DATA; 201 } 202 this->legacy.IO_ADDR_R = this->legacy.IO_ADDR_W = (void __iomem *)ioaddr; 203 if (cmd != NAND_CMD_NONE) { 204 __raw_writeb(cmd, this->legacy.IO_ADDR_W); 205 wmb(); 206 } 207 } 208 209 static int au1200_nand_device_ready(struct nand_chip *this) 210 { 211 return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1; 212 } 213 214 static struct mtd_partition db1200_nand_parts[] = { 215 { 216 .name = "NAND FS 0", 217 .offset = 0, 218 .size = 8 * 1024 * 1024, 219 }, 220 { 221 .name = "NAND FS 1", 222 .offset = MTDPART_OFS_APPEND, 223 .size = MTDPART_SIZ_FULL 224 }, 225 }; 226 227 struct platform_nand_data db1200_nand_platdata = { 228 .chip = { 229 .nr_chips = 1, 230 .chip_offset = 0, 231 .nr_partitions = ARRAY_SIZE(db1200_nand_parts), 232 .partitions = db1200_nand_parts, 233 .chip_delay = 20, 234 }, 235 .ctrl = { 236 .dev_ready = au1200_nand_device_ready, 237 .cmd_ctrl = au1200_nand_cmd_ctrl, 238 }, 239 }; 240 241 static struct resource db1200_nand_res[] = { 242 [0] = { 243 .start = DB1200_NAND_PHYS_ADDR, 244 .end = DB1200_NAND_PHYS_ADDR + 0xff, 245 .flags = IORESOURCE_MEM, 246 }, 247 }; 248 249 static struct platform_device db1200_nand_dev = { 250 .name = "gen_nand", 251 .num_resources = ARRAY_SIZE(db1200_nand_res), 252 .resource = db1200_nand_res, 253 .id = -1, 254 .dev = { 255 .platform_data = &db1200_nand_platdata, 256 } 257 }; 258 259 /**********************************************************************/ 260 261 static struct smc91x_platdata db1200_eth_data = { 262 .flags = SMC91X_NOWAIT | SMC91X_USE_16BIT, 263 .leda = RPC_LED_100_10, 264 .ledb = RPC_LED_TX_RX, 265 }; 266 267 static struct resource db1200_eth_res[] = { 268 [0] = { 269 .start = DB1200_ETH_PHYS_ADDR, 270 .end = DB1200_ETH_PHYS_ADDR + 0xf, 271 .flags = IORESOURCE_MEM, 272 }, 273 [1] = { 274 .start = DB1200_ETH_INT, 275 .end = DB1200_ETH_INT, 276 .flags = IORESOURCE_IRQ, 277 }, 278 }; 279 280 static struct platform_device db1200_eth_dev = { 281 .dev = { 282 .platform_data = &db1200_eth_data, 283 }, 284 .name = "smc91x", 285 .id = -1, 286 .num_resources = ARRAY_SIZE(db1200_eth_res), 287 .resource = db1200_eth_res, 288 }; 289 290 /**********************************************************************/ 291 292 static struct pata_platform_info db1200_ide_info = { 293 .ioport_shift = DB1200_IDE_REG_SHIFT, 294 }; 295 296 #define IDE_ALT_START (14 << DB1200_IDE_REG_SHIFT) 297 static struct resource db1200_ide_res[] = { 298 [0] = { 299 .start = DB1200_IDE_PHYS_ADDR, 300 .end = DB1200_IDE_PHYS_ADDR + IDE_ALT_START - 1, 301 .flags = IORESOURCE_MEM, 302 }, 303 [1] = { 304 .start = DB1200_IDE_PHYS_ADDR + IDE_ALT_START, 305 .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, 306 .flags = IORESOURCE_MEM, 307 }, 308 [2] = { 309 .start = DB1200_IDE_INT, 310 .end = DB1200_IDE_INT, 311 .flags = IORESOURCE_IRQ, 312 }, 313 }; 314 315 static struct platform_device db1200_ide_dev = { 316 .name = "pata_platform", 317 .id = 0, 318 .dev = { 319 .dma_mask = &au1200_all_dmamask, 320 .coherent_dma_mask = DMA_BIT_MASK(32), 321 .platform_data = &db1200_ide_info, 322 }, 323 .num_resources = ARRAY_SIZE(db1200_ide_res), 324 .resource = db1200_ide_res, 325 }; 326 327 /**********************************************************************/ 328 329 #ifdef CONFIG_MMC_AU1X 330 /* SD carddetects: they're supposed to be edge-triggered, but ack 331 * doesn't seem to work (CPLD Rev 2). Instead, the screaming one 332 * is disabled and its counterpart enabled. The 200ms timeout is 333 * because the carddetect usually triggers twice, after debounce. 334 */ 335 static irqreturn_t db1200_mmc_cd(int irq, void *ptr) 336 { 337 disable_irq_nosync(irq); 338 return IRQ_WAKE_THREAD; 339 } 340 341 static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr) 342 { 343 mmc_detect_change(ptr, msecs_to_jiffies(200)); 344 345 msleep(100); /* debounce */ 346 if (irq == DB1200_SD0_INSERT_INT) 347 enable_irq(DB1200_SD0_EJECT_INT); 348 else 349 enable_irq(DB1200_SD0_INSERT_INT); 350 351 return IRQ_HANDLED; 352 } 353 354 static int db1200_mmc_cd_setup(void *mmc_host, int en) 355 { 356 int ret; 357 358 if (en) { 359 ret = request_threaded_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd, 360 db1200_mmc_cdfn, 0, "sd_insert", mmc_host); 361 if (ret) 362 goto out; 363 364 ret = request_threaded_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd, 365 db1200_mmc_cdfn, 0, "sd_eject", mmc_host); 366 if (ret) { 367 free_irq(DB1200_SD0_INSERT_INT, mmc_host); 368 goto out; 369 } 370 371 if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) 372 enable_irq(DB1200_SD0_EJECT_INT); 373 else 374 enable_irq(DB1200_SD0_INSERT_INT); 375 376 } else { 377 free_irq(DB1200_SD0_INSERT_INT, mmc_host); 378 free_irq(DB1200_SD0_EJECT_INT, mmc_host); 379 } 380 ret = 0; 381 out: 382 return ret; 383 } 384 385 static void db1200_mmc_set_power(void *mmc_host, int state) 386 { 387 if (state) { 388 bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); 389 msleep(400); /* stabilization time */ 390 } else 391 bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); 392 } 393 394 static int db1200_mmc_card_readonly(void *mmc_host) 395 { 396 return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; 397 } 398 399 static int db1200_mmc_card_inserted(void *mmc_host) 400 { 401 return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; 402 } 403 404 static void db1200_mmcled_set(struct led_classdev *led, 405 enum led_brightness brightness) 406 { 407 if (brightness != LED_OFF) 408 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); 409 else 410 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); 411 } 412 413 static struct led_classdev db1200_mmc_led = { 414 .brightness_set = db1200_mmcled_set, 415 }; 416 417 /* -- */ 418 419 static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr) 420 { 421 disable_irq_nosync(irq); 422 return IRQ_WAKE_THREAD; 423 } 424 425 static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr) 426 { 427 mmc_detect_change(ptr, msecs_to_jiffies(200)); 428 429 msleep(100); /* debounce */ 430 if (irq == PB1200_SD1_INSERT_INT) 431 enable_irq(PB1200_SD1_EJECT_INT); 432 else 433 enable_irq(PB1200_SD1_INSERT_INT); 434 435 return IRQ_HANDLED; 436 } 437 438 static int pb1200_mmc1_cd_setup(void *mmc_host, int en) 439 { 440 int ret; 441 442 if (en) { 443 ret = request_threaded_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, 444 pb1200_mmc1_cdfn, 0, "sd1_insert", mmc_host); 445 if (ret) 446 goto out; 447 448 ret = request_threaded_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, 449 pb1200_mmc1_cdfn, 0, "sd1_eject", mmc_host); 450 if (ret) { 451 free_irq(PB1200_SD1_INSERT_INT, mmc_host); 452 goto out; 453 } 454 455 if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) 456 enable_irq(PB1200_SD1_EJECT_INT); 457 else 458 enable_irq(PB1200_SD1_INSERT_INT); 459 460 } else { 461 free_irq(PB1200_SD1_INSERT_INT, mmc_host); 462 free_irq(PB1200_SD1_EJECT_INT, mmc_host); 463 } 464 ret = 0; 465 out: 466 return ret; 467 } 468 469 static void pb1200_mmc1led_set(struct led_classdev *led, 470 enum led_brightness brightness) 471 { 472 if (brightness != LED_OFF) 473 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); 474 else 475 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); 476 } 477 478 static struct led_classdev pb1200_mmc1_led = { 479 .brightness_set = pb1200_mmc1led_set, 480 }; 481 482 static void pb1200_mmc1_set_power(void *mmc_host, int state) 483 { 484 if (state) { 485 bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); 486 msleep(400); /* stabilization time */ 487 } else 488 bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); 489 } 490 491 static int pb1200_mmc1_card_readonly(void *mmc_host) 492 { 493 return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; 494 } 495 496 static int pb1200_mmc1_card_inserted(void *mmc_host) 497 { 498 return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; 499 } 500 501 502 static struct au1xmmc_platform_data db1200_mmc_platdata[2] = { 503 [0] = { 504 .cd_setup = db1200_mmc_cd_setup, 505 .set_power = db1200_mmc_set_power, 506 .card_inserted = db1200_mmc_card_inserted, 507 .card_readonly = db1200_mmc_card_readonly, 508 .led = &db1200_mmc_led, 509 }, 510 [1] = { 511 .cd_setup = pb1200_mmc1_cd_setup, 512 .set_power = pb1200_mmc1_set_power, 513 .card_inserted = pb1200_mmc1_card_inserted, 514 .card_readonly = pb1200_mmc1_card_readonly, 515 .led = &pb1200_mmc1_led, 516 }, 517 }; 518 519 static struct resource au1200_mmc0_resources[] = { 520 [0] = { 521 .start = AU1100_SD0_PHYS_ADDR, 522 .end = AU1100_SD0_PHYS_ADDR + 0xfff, 523 .flags = IORESOURCE_MEM, 524 }, 525 [1] = { 526 .start = AU1200_SD_INT, 527 .end = AU1200_SD_INT, 528 .flags = IORESOURCE_IRQ, 529 }, 530 [2] = { 531 .start = AU1200_DSCR_CMD0_SDMS_TX0, 532 .end = AU1200_DSCR_CMD0_SDMS_TX0, 533 .flags = IORESOURCE_DMA, 534 }, 535 [3] = { 536 .start = AU1200_DSCR_CMD0_SDMS_RX0, 537 .end = AU1200_DSCR_CMD0_SDMS_RX0, 538 .flags = IORESOURCE_DMA, 539 } 540 }; 541 542 static struct platform_device db1200_mmc0_dev = { 543 .name = "au1xxx-mmc", 544 .id = 0, 545 .dev = { 546 .dma_mask = &au1200_all_dmamask, 547 .coherent_dma_mask = DMA_BIT_MASK(32), 548 .platform_data = &db1200_mmc_platdata[0], 549 }, 550 .num_resources = ARRAY_SIZE(au1200_mmc0_resources), 551 .resource = au1200_mmc0_resources, 552 }; 553 554 static struct resource au1200_mmc1_res[] = { 555 [0] = { 556 .start = AU1100_SD1_PHYS_ADDR, 557 .end = AU1100_SD1_PHYS_ADDR + 0xfff, 558 .flags = IORESOURCE_MEM, 559 }, 560 [1] = { 561 .start = AU1200_SD_INT, 562 .end = AU1200_SD_INT, 563 .flags = IORESOURCE_IRQ, 564 }, 565 [2] = { 566 .start = AU1200_DSCR_CMD0_SDMS_TX1, 567 .end = AU1200_DSCR_CMD0_SDMS_TX1, 568 .flags = IORESOURCE_DMA, 569 }, 570 [3] = { 571 .start = AU1200_DSCR_CMD0_SDMS_RX1, 572 .end = AU1200_DSCR_CMD0_SDMS_RX1, 573 .flags = IORESOURCE_DMA, 574 } 575 }; 576 577 static struct platform_device pb1200_mmc1_dev = { 578 .name = "au1xxx-mmc", 579 .id = 1, 580 .dev = { 581 .dma_mask = &au1200_all_dmamask, 582 .coherent_dma_mask = DMA_BIT_MASK(32), 583 .platform_data = &db1200_mmc_platdata[1], 584 }, 585 .num_resources = ARRAY_SIZE(au1200_mmc1_res), 586 .resource = au1200_mmc1_res, 587 }; 588 #endif /* CONFIG_MMC_AU1X */ 589 590 /**********************************************************************/ 591 592 static int db1200fb_panel_index(void) 593 { 594 return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; 595 } 596 597 static int db1200fb_panel_init(void) 598 { 599 /* Apply power */ 600 bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | 601 BCSR_BOARD_LCDBL); 602 return 0; 603 } 604 605 static int db1200fb_panel_shutdown(void) 606 { 607 /* Remove power */ 608 bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | 609 BCSR_BOARD_LCDBL, 0); 610 return 0; 611 } 612 613 static struct au1200fb_platdata db1200fb_pd = { 614 .panel_index = db1200fb_panel_index, 615 .panel_init = db1200fb_panel_init, 616 .panel_shutdown = db1200fb_panel_shutdown, 617 }; 618 619 static struct resource au1200_lcd_res[] = { 620 [0] = { 621 .start = AU1200_LCD_PHYS_ADDR, 622 .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, 623 .flags = IORESOURCE_MEM, 624 }, 625 [1] = { 626 .start = AU1200_LCD_INT, 627 .end = AU1200_LCD_INT, 628 .flags = IORESOURCE_IRQ, 629 } 630 }; 631 632 static struct platform_device au1200_lcd_dev = { 633 .name = "au1200-lcd", 634 .id = 0, 635 .dev = { 636 .dma_mask = &au1200_all_dmamask, 637 .coherent_dma_mask = DMA_BIT_MASK(32), 638 .platform_data = &db1200fb_pd, 639 }, 640 .num_resources = ARRAY_SIZE(au1200_lcd_res), 641 .resource = au1200_lcd_res, 642 }; 643 644 /**********************************************************************/ 645 646 static struct resource au1200_psc0_res[] = { 647 [0] = { 648 .start = AU1550_PSC0_PHYS_ADDR, 649 .end = AU1550_PSC0_PHYS_ADDR + 0xfff, 650 .flags = IORESOURCE_MEM, 651 }, 652 [1] = { 653 .start = AU1200_PSC0_INT, 654 .end = AU1200_PSC0_INT, 655 .flags = IORESOURCE_IRQ, 656 }, 657 [2] = { 658 .start = AU1200_DSCR_CMD0_PSC0_TX, 659 .end = AU1200_DSCR_CMD0_PSC0_TX, 660 .flags = IORESOURCE_DMA, 661 }, 662 [3] = { 663 .start = AU1200_DSCR_CMD0_PSC0_RX, 664 .end = AU1200_DSCR_CMD0_PSC0_RX, 665 .flags = IORESOURCE_DMA, 666 }, 667 }; 668 669 static struct platform_device db1200_i2c_dev = { 670 .name = "au1xpsc_smbus", 671 .id = 0, /* bus number */ 672 .num_resources = ARRAY_SIZE(au1200_psc0_res), 673 .resource = au1200_psc0_res, 674 }; 675 676 static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol) 677 { 678 if (cs) 679 bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL); 680 else 681 bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0); 682 } 683 684 static struct au1550_spi_info db1200_spi_platdata = { 685 .mainclk_hz = 50000000, /* PSC0 clock */ 686 .num_chipselect = 2, 687 .activate_cs = db1200_spi_cs_en, 688 }; 689 690 static struct platform_device db1200_spi_dev = { 691 .dev = { 692 .dma_mask = &au1200_all_dmamask, 693 .coherent_dma_mask = DMA_BIT_MASK(32), 694 .platform_data = &db1200_spi_platdata, 695 }, 696 .name = "au1550-spi", 697 .id = 0, /* bus number */ 698 .num_resources = ARRAY_SIZE(au1200_psc0_res), 699 .resource = au1200_psc0_res, 700 }; 701 702 static struct resource au1200_psc1_res[] = { 703 [0] = { 704 .start = AU1550_PSC1_PHYS_ADDR, 705 .end = AU1550_PSC1_PHYS_ADDR + 0xfff, 706 .flags = IORESOURCE_MEM, 707 }, 708 [1] = { 709 .start = AU1200_PSC1_INT, 710 .end = AU1200_PSC1_INT, 711 .flags = IORESOURCE_IRQ, 712 }, 713 [2] = { 714 .start = AU1200_DSCR_CMD0_PSC1_TX, 715 .end = AU1200_DSCR_CMD0_PSC1_TX, 716 .flags = IORESOURCE_DMA, 717 }, 718 [3] = { 719 .start = AU1200_DSCR_CMD0_PSC1_RX, 720 .end = AU1200_DSCR_CMD0_PSC1_RX, 721 .flags = IORESOURCE_DMA, 722 }, 723 }; 724 725 /* AC97 or I2S device */ 726 static struct platform_device db1200_audio_dev = { 727 /* name assigned later based on switch setting */ 728 .id = 1, /* PSC ID */ 729 .num_resources = ARRAY_SIZE(au1200_psc1_res), 730 .resource = au1200_psc1_res, 731 }; 732 733 /* DB1200 ASoC card device */ 734 static struct platform_device db1200_sound_dev = { 735 /* name assigned later based on switch setting */ 736 .id = 1, /* PSC ID */ 737 .dev = { 738 .dma_mask = &au1200_all_dmamask, 739 .coherent_dma_mask = DMA_BIT_MASK(32), 740 }, 741 }; 742 743 static struct platform_device db1200_stac_dev = { 744 .name = "ac97-codec", 745 .id = 1, /* on PSC1 */ 746 }; 747 748 static struct platform_device db1200_audiodma_dev = { 749 .name = "au1xpsc-pcm", 750 .id = 1, /* PSC ID */ 751 }; 752 753 static struct platform_device *db1200_devs[] __initdata = { 754 NULL, /* PSC0, selected by S6.8 */ 755 &db1200_ide_dev, 756 #ifdef CONFIG_MMC_AU1X 757 &db1200_mmc0_dev, 758 #endif 759 &au1200_lcd_dev, 760 &db1200_eth_dev, 761 &db1200_nand_dev, 762 &db1200_audiodma_dev, 763 &db1200_audio_dev, 764 &db1200_stac_dev, 765 &db1200_sound_dev, 766 }; 767 768 static struct platform_device *pb1200_devs[] __initdata = { 769 #ifdef CONFIG_MMC_AU1X 770 &pb1200_mmc1_dev, 771 #endif 772 }; 773 774 /* Some peripheral base addresses differ on the PB1200 */ 775 static int __init pb1200_res_fixup(void) 776 { 777 /* CPLD Revs earlier than 4 cause problems */ 778 if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { 779 printk(KERN_ERR "WARNING!!!\n"); 780 printk(KERN_ERR "WARNING!!!\n"); 781 printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n"); 782 printk(KERN_ERR "the board updated to latest revisions.\n"); 783 printk(KERN_ERR "This software will not work reliably\n"); 784 printk(KERN_ERR "on anything older than CPLD rev 4.!\n"); 785 printk(KERN_ERR "WARNING!!!\n"); 786 printk(KERN_ERR "WARNING!!!\n"); 787 return 1; 788 } 789 790 db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR; 791 db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff; 792 db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR; 793 db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1; 794 db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR; 795 db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff; 796 return 0; 797 } 798 799 int __init db1200_dev_setup(void) 800 { 801 unsigned long pfc; 802 unsigned short sw; 803 int swapped, bid; 804 struct clk *c; 805 806 bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); 807 if ((bid == BCSR_WHOAMI_PB1200_DDR1) || 808 (bid == BCSR_WHOAMI_PB1200_DDR2)) { 809 if (pb1200_res_fixup()) 810 return -ENODEV; 811 } 812 813 /* GPIO7 is low-level triggered CPLD cascade */ 814 irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW); 815 bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); 816 817 /* SMBus/SPI on PSC0, Audio on PSC1 */ 818 pfc = alchemy_rdsys(AU1000_SYS_PINFUNC); 819 pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); 820 pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); 821 pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ 822 alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); 823 824 /* get 50MHz for I2C driver on PSC0 */ 825 c = clk_get(NULL, "psc0_intclk"); 826 if (!IS_ERR(c)) { 827 pfc = clk_round_rate(c, 50000000); 828 if ((pfc < 1) || (abs(50000000 - pfc) > 2500000)) 829 pr_warn("DB1200: can't get I2C close to 50MHz\n"); 830 else 831 clk_set_rate(c, pfc); 832 clk_prepare_enable(c); 833 clk_put(c); 834 } 835 836 /* insert/eject pairs: one of both is always screaming. To avoid 837 * issues they must not be automatically enabled when initially 838 * requested. 839 */ 840 irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN); 841 irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN); 842 irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN); 843 irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN); 844 irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN); 845 irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN); 846 847 i2c_register_board_info(0, db1200_i2c_devs, 848 ARRAY_SIZE(db1200_i2c_devs)); 849 spi_register_board_info(db1200_spi_devs, 850 ARRAY_SIZE(db1200_i2c_devs)); 851 852 /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) 853 * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) 854 * or S12 on the PB1200. 855 */ 856 857 /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however 858 * this pin is claimed by PSC0 (unused though, but pinmux doesn't 859 * allow to free it without crippling the SPI interface). 860 * As a result, in SPI mode, OTG simply won't work (PSC0 uses 861 * it as an input pin which is pulled high on the boards). 862 */ 863 pfc = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PINFUNC_P0A; 864 865 /* switch off OTG VBUS supply */ 866 gpio_request(215, "otg-vbus"); 867 gpio_direction_output(215, 1); 868 869 printk(KERN_INFO "%s device configuration:\n", get_system_type()); 870 871 sw = bcsr_read(BCSR_SWITCHES); 872 if (sw & BCSR_SWITCHES_DIP_8) { 873 db1200_devs[0] = &db1200_i2c_dev; 874 bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); 875 876 pfc |= (2 << 17); /* GPIO2 block owns GPIO215 */ 877 878 printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n"); 879 printk(KERN_INFO " OTG port VBUS supply available!\n"); 880 } else { 881 db1200_devs[0] = &db1200_spi_dev; 882 bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX); 883 884 pfc |= (1 << 17); /* PSC0 owns GPIO215 */ 885 886 printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n"); 887 printk(KERN_INFO " OTG port VBUS supply disabled\n"); 888 } 889 alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); 890 891 /* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S! 892 * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S 893 */ 894 sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7; 895 if (sw == BCSR_SWITCHES_DIP_8) { 896 bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX); 897 db1200_audio_dev.name = "au1xpsc_i2s"; 898 db1200_sound_dev.name = "db1200-i2s"; 899 printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n"); 900 } else { 901 bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0); 902 db1200_audio_dev.name = "au1xpsc_ac97"; 903 db1200_sound_dev.name = "db1200-ac97"; 904 printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n"); 905 } 906 907 /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ 908 __raw_writel(PSC_SEL_CLK_SERCLK, 909 (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); 910 wmb(); 911 912 db1x_register_pcmcia_socket( 913 AU1000_PCMCIA_ATTR_PHYS_ADDR, 914 AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, 915 AU1000_PCMCIA_MEM_PHYS_ADDR, 916 AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, 917 AU1000_PCMCIA_IO_PHYS_ADDR, 918 AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, 919 DB1200_PC0_INT, DB1200_PC0_INSERT_INT, 920 /*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0); 921 922 db1x_register_pcmcia_socket( 923 AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, 924 AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, 925 AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, 926 AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, 927 AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, 928 AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, 929 DB1200_PC1_INT, DB1200_PC1_INSERT_INT, 930 /*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1); 931 932 swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; 933 db1x_register_norflash(64 << 20, 2, swapped); 934 935 platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); 936 937 /* PB1200 is a DB1200 with a 2nd MMC and Camera connector */ 938 if ((bid == BCSR_WHOAMI_PB1200_DDR1) || 939 (bid == BCSR_WHOAMI_PB1200_DDR2)) 940 platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs)); 941 942 return 0; 943 } 944