xref: /linux/arch/mips/Kconfig (revision 63b799f9ded82444212afdcf61379a247d544909)

config MIPS
	bool
	default y
	# Horrible source of confusion.  Die, die, die ...
	select EMBEDDED

config MIPS64
	bool "64-bit kernel"
	help
	  Select this option if you want to build a 64-bit kernel.  You should
	  only select this option if you have hardware that actually has a
	  64-bit processor and if your application will actually benefit from
	  64-bit processing, otherwise say N.  You must say Y for kernels for
	  SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2).  If in doubt say N.

config 64BIT
	def_bool MIPS64

config MIPS32
	bool
	depends on MIPS64 = 'n'
	default y

mainmenu "Linux/MIPS Kernel Configuration"

source "init/Kconfig"

menu "Machine selection"

config MACH_JAZZ
	bool "Support for the Jazz family of machines"
	select ARC
	select ARC32
	select GENERIC_ISA_DMA
	select I8259
	select ISA
	help
	 This a family of machines based on the MIPS R4030 chipset which was
	 used by several vendors to build RISC/os and Windows NT workstations.
	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
	 Olivetti M700-10 workstations.

config ACER_PICA_61
	bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
	depends on MACH_JAZZ && EXPERIMENTAL
	select DMA_NONCOHERENT
	help
	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
	  kernel that runs on these, say Y here. For details about Linux on
	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
	  <http://www.linux-mips.org/>.

config MIPS_MAGNUM_4000
	bool "Support for MIPS Magnum 4000"
	depends on MACH_JAZZ
	select DMA_NONCOHERENT
	help
	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
	  kernel that runs on these, say Y here. For details about Linux on
	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
	  <http://www.linux-mips.org/>.

config OLIVETTI_M700
	bool "Support for Olivetti M700-10"
	depends on MACH_JAZZ
	select DMA_NONCOHERENT
	help
	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
	  kernel that runs on these, say Y here. For details about Linux on
	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
	  <http://www.linux-mips.org/>.

config MACH_VR41XX
	bool "Support for NEC VR41XX-based machines"

config NEC_CMBVR4133
	bool "Support for NEC CMB-VR4133"
	depends on MACH_VR41XX
	select CPU_VR41XX
	select DMA_NONCOHERENT
	select IRQ_CPU
	select HW_HAS_PCI
	select PCI_VR41XX

config ROCKHOPPER
	bool "Support for Rockhopper baseboard"
	depends on NEC_CMBVR4133
	select I8259
	select HAVE_STD_PC_SERIAL_PORT

config CASIO_E55
	bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
	depends on MACH_VR41XX
	select DMA_NONCOHERENT
	select IRQ_CPU
	select ISA

config IBM_WORKPAD
	bool "Support for IBM WorkPad z50"
	depends on MACH_VR41XX
	select DMA_NONCOHERENT
	select IRQ_CPU
	select ISA

config TANBAC_TB022X
	bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
	depends on MACH_VR41XX
	select CPU_LITTLE_ENDIAN
	select DMA_NONCOHERENT
	select IRQ_CPU
	select HW_HAS_PCI
	help
	  The TANBAC VR4131 multichip module(TB0225) and
	  the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
	  manufactured by TANBAC.
	  Please refer to <http://www.tanbac.co.jp/>
	  about VR4131 multichip module and VR4131DIMM.

config TANBAC_TB0226
	bool "Support for TANBAC Mbase(TB0226)"
	depends on TANBAC_TB022X
	select PCI
	select PCI_VR41XX
	select GPIO_VR41XX
	help
	  The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC.
	  Please refer to <http://www.tanbac.co.jp/> about Mbase.

config VICTOR_MPC30X
	bool "Support for Victor MP-C303/304"
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	depends on MACH_VR41XX

config ZAO_CAPCELLA
	bool "Support for ZAO Networks Capcella"
	depends on MACH_VR41XX
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU

config PCI_VR41XX
	bool "Add PCI control unit support of NEC VR4100 series"
	depends on MACH_VR41XX && PCI

config VRC4171
	tristate "Add NEC VRC4171 companion chip support"
	depends on MACH_VR41XX && ISA
	---help---
	  The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.

config VRC4173
	tristate "Add NEC VRC4173 companion chip support"
	depends on MACH_VR41XX && PCI_VR41XX
	---help---
	  The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.

config TOSHIBA_JMR3927
	bool "Support for Toshiba JMR-TX3927 board"
	depends on MIPS32
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select SWAP_IO_SPACE

config MIPS_COBALT
	bool "Support for Cobalt Server (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select I8259
	select IRQ_CPU

config MACH_DECSTATION
	bool "Support for DECstations"
	select BOOT_ELF32
	select DMA_NONCOHERENT
	select IRQ_CPU
	depends on MIPS32 || EXPERIMENTAL
	---help---
	  This enables support for DEC's MIPS based workstations.  For details
	  see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
	  DECstation porting pages on <http://decstation.unix-ag.org/>.

	  If you have one of the following DECstation Models you definitely
	  want to choose R4xx0 for the CPU Type:

	  	DECstation 5000/50
	  	DECstation 5000/150
	  	DECstation 5000/260
	  	DECsystem 5900/260

	  otherwise choose R3000.

config MIPS_EV64120
	bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select MIPS_GT64120
	help
	  This is an evaluation board based on the Galileo GT-64120
	  single-chip system controller that contains a MIPS R5000 compatible
	  core running at 75/100MHz.  Their website is located at
	  <http://www.marvell.com/>.  Say Y here if you wish to build a
	  kernel for this platform.

config EVB_PCI1
	bool "Enable Second PCI (PCI1)"
	depends on MIPS_EV64120

config MIPS_EV96100
	bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select MIPS_GT96100
	select RM7000_CPU_SCACHE
	select SWAP_IO_SPACE
	help
	  This is an evaluation board based on the Galileo GT-96100 LAN/WAN
	  communications controllers containing a MIPS R5000 compatible core
	  running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
	  here if you wish to build a kernel for this platform.

config MIPS_IVR
	bool "Support for Globespan IVR board"
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	help
	  This is an evaluation board built by Globespan to showcase thir
	  iVR (Internet Video Recorder) design. It utilizes a QED RM5231
	  R5000 MIPS core. More information can be found out their website
	  located at <http://www.globespan.net/>. Say Y here if you wish to
	  build a kernel for this platform.

config LASAT
	bool "Support for LASAT Networks platforms"
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select MIPS_GT64120
	select R5000_CPU_SCACHE

config PICVUE
	tristate "PICVUE LCD display driver"
	depends on LASAT

config PICVUE_PROC
	tristate "PICVUE LCD display driver /proc interface"
	depends on PICVUE

config DS1603
	bool "DS1603 RTC driver"
	depends on LASAT

config LASAT_SYSCTL
	bool "LASAT sysctl interface"
	depends on LASAT

config MIPS_ITE8172
	bool "Support for ITE 8172G board"
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	help
	  Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
	  with ATX form factor that utilizes a MIPS R5000 to work with its
	  ITE8172G companion internet appliance chip. The MIPS core can be
	  either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
	  a kernel for this platform.

config IT8172_REVC
	bool "Support for older IT8172 (Rev C)"
	depends on MIPS_ITE8172
	help
	  Say Y here to support the older, Revision C version of the Integrated
	  Technology Express, Inc. ITE8172 SBC.  Vendor page at
	  <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
	  board at <http://www.mvista.com/partners/semiconductor/ite.html>.

config MIPS_ATLAS
	bool "Support for MIPS Atlas board"
	select BOOT_ELF32
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select MIPS_GT64120
	select SWAP_IO_SPACE
	help
	  This enables support for the QED R5231-based MIPS Atlas evaluation
	  board.

config MIPS_MALTA
	bool "Support for MIPS Malta board"
	select BOOT_ELF32
	select HAVE_STD_PC_SERIAL_PORT
	select DMA_NONCOHERENT
	select GENERIC_ISA_DMA
	select HW_HAS_PCI
	select I8259
	select MIPS_GT64120
	select SWAP_IO_SPACE
	help
	  This enables support for the VR5000-based MIPS Malta evaluation
	  board.

config MIPS_SEAD
	bool "Support for MIPS SEAD board (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	select IRQ_CPU
	select DMA_NONCOHERENT

config MOMENCO_OCELOT
	bool "Support for Momentum Ocelot board"
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select IRQ_CPU_RM7K
	select MIPS_GT64120
	select RM7000_CPU_SCACHE
	select SWAP_IO_SPACE
	help
	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
	  Momentum Computer <http://www.momenco.com/>.

config MOMENCO_OCELOT_G
	bool "Support for Momentum Ocelot-G board"
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select IRQ_CPU_RM7K
	select PCI_MARVELL
	select RM7000_CPU_SCACHE
	select SWAP_IO_SPACE
	help
	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
	  Momentum Computer <http://www.momenco.com/>.

config MOMENCO_OCELOT_C
	bool "Support for Momentum Ocelot-C board"
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select IRQ_MV64340
	select PCI_MARVELL
	select RM7000_CPU_SCACHE
	select SWAP_IO_SPACE
	help
	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
	  Momentum Computer <http://www.momenco.com/>.

config MOMENCO_OCELOT_3
	bool "Support for Momentum Ocelot-3 board"
	select BOOT_ELF32
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select IRQ_CPU_RM7K
	select IRQ_MV64340
	select PCI_MARVELL
	select RM7000_CPU_SCACHE
	select SWAP_IO_SPACE
	help
	  The Ocelot-3 is based off Discovery III System Controller and
	  PMC-Sierra Rm79000 core.

config MOMENCO_JAGUAR_ATX
	bool "Support for Momentum Jaguar board"
	select BOOT_ELF32
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select IRQ_CPU_RM7K
	select IRQ_MV64340
	select LIMITED_DMA
	select PCI_MARVELL
	select RM7000_CPU_SCACHE
	select SWAP_IO_SPACE
	help
	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
	  Momentum Computer <http://www.momenco.com/>.

config JAGUAR_DMALOW
	bool "Low DMA Mode"
	depends on MOMENCO_JAGUAR_ATX
	help
	  Select to Y if jump JP5 is set on your board, N otherwise.  Normally
	  the jumper is set, so if you feel unsafe, just say Y.

config PMC_YOSEMITE
	bool "Support for PMC-Sierra Yosemite eval board"
	select DMA_COHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select IRQ_CPU_RM7K
	select IRQ_CPU_RM9K
	select SWAP_IO_SPACE
	help
	  Yosemite is an evaluation board for the RM9000x2 processor
	  manufactured by PMC-Sierra

config HYPERTRANSPORT
	bool "Hypertransport Support for PMC-Sierra Yosemite"
	depends on PMC_YOSEMITE

config DDB5074
	bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	select DMA_NONCOHERENT
	select HAVE_STD_PC_SERIAL_PORT
	select HW_HAS_PCI
	select IRQ_CPU
	select I8259
	select ISA
	help
	  This enables support for the VR5000-based NEC DDB Vrc-5074
	  evaluation board.

config DDB5476
	bool "Support for NEC DDB Vrc-5476"
	select DMA_NONCOHERENT
	select HAVE_STD_PC_SERIAL_PORT
	select HW_HAS_PCI
	select IRQ_CPU
	select I8259
	select ISA
	help
	  This enables support for the R5432-based NEC DDB Vrc-5476
	  evaluation board.

	  Features : kernel debugging, serial terminal, NFS root fs, on-board
	  ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
	  IDE controller, PS2 keyboard, PS2 mouse, etc.

config DDB5477
	bool "Support for NEC DDB Vrc-5477"
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select I8259
	select IRQ_CPU
	help
	  This enables support for the R5432-based NEC DDB Vrc-5477,
	  or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.

	  Features : kernel debugging, serial terminal, NFS root fs, on-board
	  ether port USB, AC97, PCI, etc.

config DDB5477_BUS_FREQUENCY
	int "bus frequency (in kHZ, 0 for auto-detect)"
	depends on DDB5477
	default 0

config QEMU
	bool "Support for Qemu"
	select DMA_COHERENT
	select GENERIC_ISA_DMA
	select HAVE_STD_PC_SERIAL_PORT
	select I8259
	select ISA
	select SWAP_IO_SPACE
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN
	help
	 Qemu is a software emulator which among other architectures also
	 can simulate a MIPS32 4Kc system.  This patch adds support for the
	 system architecture that currently is being simulated by Qemu.  It
	 will eventually be removed again when Qemu has the capability to
	 simulate actual MIPS hardware platforms.  More information on Qemu
	 can be found at http://www.linux-mips.org/wiki/Qemu.

config SGI_IP22
	bool "Support for SGI IP22 (Indy/Indigo2)"
	select ARC
	select ARC32
	select BOOT_ELF32
	select DMA_NONCOHERENT
	select IP22_CPU_SCACHE
	select IRQ_CPU
	select SWAP_IO_SPACE
	help
	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
	  that runs on these, say Y here.

config SGI_IP27
	bool "Support for SGI IP27 (Origin200/2000)"
	depends on MIPS64
	select ARC
	select ARC64
	select DMA_IP27
	select HW_HAS_PCI
	select PCI_DOMAINS
	help
	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
	  workstations.  To compile a Linux kernel that runs on these, say Y
	  here.

#config SGI_SN0_XXL
#	bool "IP27 XXL"
#	depends on SGI_IP27
#	  This options adds support for userspace processes upto 16TB size.
#	  Normally the limit is just .5TB.

config SGI_SN0_N_MODE
	bool "IP27 N-Mode"
	depends on SGI_IP27
	help
	  The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
	  configured in either N-Modes which allows for more nodes or M-Mode
	  which allows for more memory.  Your system is most probably
	  running in M-Mode, so you should say N here.

config ARCH_DISCONTIGMEM_ENABLE
	bool
	default y if SGI_IP27
	help
	  Say Y to upport efficient handling of discontiguous physical memory,
	  for architectures which are either NUMA (Non-Uniform Memory Access)
	  or have huge holes in the physical address space for other reasons.
	  See <file:Documentation/vm/numa> for more.

config NUMA
	bool "NUMA Support"
	depends on SGI_IP27
	help
	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
	  Access).  This option is for configuring high-end multiprocessor
	  server machines.  If in doubt, say N.

config MAPPED_KERNEL
	bool "Mapped kernel support"
	depends on SGI_IP27
	help
	  Change the way a Linux kernel is loaded into memory on a MIPS64
	  machine.  This is required in order to support text replication and
	  NUMA.  If you need to understand it, read the source code.

config REPLICATE_KTEXT
	bool "Kernel text replication support"
	depends on SGI_IP27
	help
	  Say Y here to enable replicating the kernel text across multiple
	  nodes in a NUMA cluster.  This trades memory for speed.

config REPLICATE_EXHANDLERS
	bool "Exception handler replication support"
	depends on SGI_IP27
	help
	  Say Y here to enable replicating the kernel exception handlers
	  across multiple nodes in a NUMA cluster. This trades memory for
	  speed.

config SGI_IP32
	bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
	depends on MIPS64 && EXPERIMENTAL
	select ARC
	select ARC32
	select BOOT_ELF32
	select OWN_DMA
	select DMA_IP32
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select R5000_CPU_SCACHE
	select RM7000_CPU_SCACHE
	help
	  If you want this kernel to run on SGI O2 workstation, say Y here.

config SOC_AU1X00
	depends on MIPS32
	bool "Support for AMD/Alchemy Au1X00 SOCs"

choice
	prompt "Au1X00 SOC Type"
	depends on SOC_AU1X00
	help
	  Say Y here to enable support for one of three AMD/Alchemy
	  SOCs. For additional documentation see www.amd.com.

config SOC_AU1000
	bool "SOC_AU1000"
config SOC_AU1100
	bool "SOC_AU1100"
config SOC_AU1500
	bool "SOC_AU1500"
config SOC_AU1550
	bool "SOC_AU1550"

endchoice

choice
	prompt "AMD/Alchemy Au1x00 board support"
	depends on SOC_AU1X00
	help
	  These are evaluation boards built by AMD/Alchemy to
	  showcase their Au1X00 Internet Edge Processors. The SOC design
	  is based on the MIPS32 architecture running at 266/400/500MHz
	  with many integrated peripherals. Further information can be
	  found at their website, <http://www.amd.com/>. Say Y here if you
	  wish to build a kernel for this platform.

config MIPS_PB1000
	bool "PB1000 board"
	depends on SOC_AU1000
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select SWAP_IO_SPACE

config MIPS_PB1100
	bool "PB1100 board"
	depends on SOC_AU1100
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select SWAP_IO_SPACE

config MIPS_PB1500
	bool "PB1500 board"
	depends on SOC_AU1500
	select DMA_COHERENT
	select HW_HAS_PCI

config MIPS_PB1550
	bool "PB1550 board"
	depends on SOC_AU1550
	select DMA_COHERENT
	select HW_HAS_PCI
	select MIPS_DISABLE_OBSOLETE_IDE

config MIPS_DB1000
	bool "DB1000 board"
	depends on SOC_AU1000
	select DMA_NONCOHERENT
	select HW_HAS_PCI

config MIPS_DB1100
	bool "DB1100 board"
	depends on SOC_AU1100
	select DMA_NONCOHERENT

config MIPS_DB1500
	bool "DB1500 board"
	depends on SOC_AU1500
	select DMA_COHERENT
	select HW_HAS_PCI
	select MIPS_DISABLE_OBSOLETE_IDE

config MIPS_DB1550
	bool "DB1550 board"
	depends on SOC_AU1550
	select HW_HAS_PCI
	select DMA_COHERENT
	select MIPS_DISABLE_OBSOLETE_IDE

config MIPS_BOSPORUS
	bool "Bosporus board"
	depends on SOC_AU1500
	select DMA_NONCOHERENT

config MIPS_MIRAGE
	bool "Mirage board"
	depends on SOC_AU1500
	select DMA_NONCOHERENT

config MIPS_XXS1500
	bool "MyCable XXS1500 board"
	depends on SOC_AU1500
	select DMA_NONCOHERENT

config MIPS_MTX1
	bool "4G Systems MTX-1 board"
	depends on SOC_AU1500
	select HW_HAS_PCI
	select DMA_NONCOHERENT

endchoice

config SIBYTE_SB1xxx_SOC
	bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	select BOOT_ELF32
	select DMA_COHERENT
	select SWAP_IO_SPACE

choice
	prompt "BCM1xxx SOC-based board"
	depends on SIBYTE_SB1xxx_SOC
	default SIBYTE_SWARM
	help
	  Enable support for boards based on the SiByte line of SOCs
	  from Broadcom.  There are configurations for the known
	  evaluation boards, or you can choose "Other" and add your
	  own board support code.

config SIBYTE_SWARM
	bool "BCM91250A-SWARM"
	select SIBYTE_SB1250

config SIBYTE_SENTOSA
	bool "BCM91250E-Sentosa"
	select SIBYTE_SB1250

config SIBYTE_RHONE
	bool "BCM91125E-Rhone"
	select SIBYTE_BCM1125H

config SIBYTE_CARMEL
	bool "BCM91120x-Carmel"
	select SIBYTE_BCM1120

config SIBYTE_PTSWARM
	bool "BCM91250PT-PTSWARM"
	select SIBYTE_SB1250

config SIBYTE_LITTLESUR
	bool "BCM91250C2-LittleSur"
	select SIBYTE_SB1250

config SIBYTE_CRHINE
	bool "BCM91120C-CRhine"
	select SIBYTE_BCM1120

config SIBYTE_CRHONE
	bool "BCM91125C-CRhone"
	select SIBYTE_BCM1125

config SIBYTE_UNKNOWN
	bool "Other"

endchoice

config SIBYTE_BOARD
	bool
	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
	default y

choice
	prompt "BCM1xxx SOC Type"
	depends on SIBYTE_UNKNOWN
	default SIBYTE_UNK_BCM1250
	help
	  Since you haven't chosen a known evaluation board from
	  Broadcom, you must explicitly pick the SOC this kernel is
	  targetted for.

config SIBYTE_UNK_BCM1250
	bool "BCM1250"
	select SIBYTE_SB1250

config SIBYTE_UNK_BCM1120
	bool "BCM1120"
	select SIBYTE_BCM1120

config SIBYTE_UNK_BCM1125
	bool "BCM1125"
	select SIBYTE_BCM1125

config SIBYTE_UNK_BCM1125H
	bool "BCM1125H"
	select SIBYTE_BCM1125H

endchoice

config SIBYTE_SB1250
	bool
	select HW_HAS_PCI

config SIBYTE_BCM1120
	bool
	select SIBYTE_BCM112X

config SIBYTE_BCM1125
	bool
	select HW_HAS_PCI
	select SIBYTE_BCM112X

config SIBYTE_BCM1125H
	bool
	select HW_HAS_PCI
	select SIBYTE_BCM112X

config SIBYTE_BCM112X
	bool

choice
	prompt "SiByte SOC Stepping"
	depends on SIBYTE_SB1xxx_SOC

config CPU_SB1_PASS_1
	bool "1250 Pass1"
	depends on SIBYTE_SB1250
	select CPU_HAS_PREFETCH

config CPU_SB1_PASS_2_1250
	bool "1250 An"
	depends on SIBYTE_SB1250
	select CPU_SB1_PASS_2
	help
	  Also called BCM1250 Pass 2

config CPU_SB1_PASS_2_2
	bool "1250 Bn"
	depends on SIBYTE_SB1250
	select CPU_HAS_PREFETCH
	help
	  Also called BCM1250 Pass 2.2

config CPU_SB1_PASS_4
	bool "1250 Cn"
	depends on SIBYTE_SB1250
	select CPU_HAS_PREFETCH
	help
	  Also called BCM1250 Pass 3

config CPU_SB1_PASS_2_112x
	bool "112x Hybrid"
	depends on SIBYTE_BCM112X
	select CPU_SB1_PASS_2

config CPU_SB1_PASS_3
	bool "112x An"
	depends on SIBYTE_BCM112X
	select CPU_HAS_PREFETCH

endchoice

config CPU_SB1_PASS_2
	bool

config SIBYTE_HAS_LDT
	bool
	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
	default y

config SIMULATION
	bool "Running under simulation"
	depends on SIBYTE_SB1xxx_SOC
	help
	  Build a kernel suitable for running under the GDB simulator.
	  Primarily adjusts the kernel's notion of time.

config SIBYTE_CFE
	bool "Booting from CFE"
	depends on SIBYTE_SB1xxx_SOC
	help
	  Make use of the CFE API for enumerating available memory,
	  controlling secondary CPUs, and possibly console output.

config SIBYTE_CFE_CONSOLE
	bool "Use firmware console"
	depends on SIBYTE_CFE
	help
	  Use the CFE API's console write routines during boot.  Other console
	  options (VT console, sb1250 duart console, etc.) should not be
	  configured.

config SIBYTE_STANDALONE
	bool
	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
	default y

config SIBYTE_STANDALONE_RAM_SIZE
	int "Memory size (in megabytes)"
	depends on SIBYTE_STANDALONE
	default "32"

config SIBYTE_BUS_WATCHER
	bool "Support for Bus Watcher statistics"
	depends on SIBYTE_SB1xxx_SOC
	help
	  Handle and keep statistics on the bus error interrupts (COR_ECC,
	  BAD_ECC, IO_BUS).

config SIBYTE_BW_TRACE
	bool "Capture bus trace before bus error"
	depends on SIBYTE_BUS_WATCHER
	help
	  Run a continuous bus trace, dumping the raw data as soon as
	  a ZBbus error is detected.  Cannot work if ZBbus profiling
	  is turned on, and also will interfere with JTAG-based trace
	  buffer activity.  Raw buffer data is dumped to console, and
	  must be processed off-line.

config SIBYTE_SB1250_PROF
	bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
	depends on SIBYTE_SB1xxx_SOC

config SIBYTE_TBPROF
	bool "Support for ZBbus profiling"
	depends on SIBYTE_SB1xxx_SOC

config SNI_RM200_PCI
	bool "Support for SNI RM200 PCI"
	select ARC
	select ARC32
	select BOOT_ELF32
	select DMA_NONCOHERENT
	select GENERIC_ISA_DMA
	select HAVE_STD_PC_SERIAL_PORT
	select HW_HAS_PCI
	select I8259
	select ISA
	help
	  The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
	  Nixdorf Informationssysteme (SNI), parent company of Pyramid
	  Technology and now in turn merged with Fujitsu.  Say Y here to
	  support this machine type.

config TOSHIBA_RBTX4927
	bool "Support for Toshiba TBTX49[23]7 board"
	depends on MIPS32
	select DMA_NONCOHERENT
	select HAS_TXX9_SERIAL
	select HW_HAS_PCI
	select I8259
	select ISA
	select SWAP_IO_SPACE
	help
	  This Toshiba board is based on the TX4927 processor. Say Y here to
	  support this machine type

config TOSHIBA_FPCIB0
	bool "FPCIB0 Backplane Support"
	depends on TOSHIBA_RBTX4927

config RWSEM_GENERIC_SPINLOCK
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool

config GENERIC_CALIBRATE_DELAY
	bool
	default y

config HAVE_DEC_LOCK
	bool
	default y

#
# Select some configuration options automatically based on user selections.
#
config ARC
	bool
	depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
	default y

config	DMA_COHERENT
	bool

config	DMA_IP27
	bool

config	DMA_NONCOHERENT
	bool

config EARLY_PRINTK
	bool
	depends on MACH_DECSTATION
	default y

config GENERIC_ISA_DMA
	bool
	depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
	default y

config I8259
	bool
	depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
	default y

config LIMITED_DMA
	bool
	select HIGHMEM

config MIPS_BONITO64
	bool
	depends on MIPS_ATLAS || MIPS_MALTA
	default y

config MIPS_MSC
	bool
	depends on MIPS_ATLAS || MIPS_MALTA
	default y

config MIPS_NILE4
	bool
	depends on LASAT
	default y

config MIPS_DISABLE_OBSOLETE_IDE
	bool

config CPU_LITTLE_ENDIAN
	bool "Generate little endian code"
	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
	default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
	help
	  Some MIPS machines can be configured for either little or big endian
	  byte order. These modes require different kernels. Say Y if your
	  machine is little endian, N if it's a big endian machine.

config IRQ_CPU
	bool

config IRQ_CPU_RM7K
	bool

config IRQ_MV64340
	bool

config DDB5XXX_COMMON
	bool
	depends on DDB5074 || DDB5476 || DDB5477
	default y

config MIPS_BOARDS_GEN
	bool
	depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
	default y

config MIPS_GT64111
	bool
	depends on MIPS_COBALT
	default y

config MIPS_GT64120
	bool
	depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
	default y

config MIPS_TX3927
	bool
	depends on TOSHIBA_JMR3927
	select HAS_TXX9_SERIAL
	default y

config PCI_MARVELL
	bool

config ITE_BOARD_GEN
	bool
	depends on MIPS_IVR || MIPS_ITE8172
	default y

config SWAP_IO_SPACE
	bool

#
# Unfortunately not all GT64120 systems run the chip at the same clock.
# As the user for the clock rate and try to minimize the available options.
#
choice
	prompt "Galileo Chip Clock"
	#default SYSCLK_83 if MIPS_EV64120
	depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
	default SYSCLK_83 if MIPS_EV64120
	default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G

config SYSCLK_75
	bool "75" if MIPS_EV64120

config SYSCLK_83
	bool "83.3" if MIPS_EV64120

config SYSCLK_100
	bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G

endchoice

config AU1X00_USB_DEVICE
	bool
	depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
	default n

config MIPS_GT96100
	bool
	depends on MIPS_EV96100
	default y
	help
	  Say Y here to support the Galileo Technology GT96100 communications
	  controller card.  There is a web page at <http://www.galileot.com/>.

config IT8172_CIR
	bool
	depends on MIPS_ITE8172 || MIPS_IVR
	default y

config IT8712
	bool
	depends on MIPS_ITE8172
	default y

config BOOT_ELF32
	bool
	depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
	default y

config MIPS_L1_CACHE_SHIFT
	int
	default "4" if MACH_DECSTATION
	default "7" if SGI_IP27
	default "5"

config ARC32
	bool
	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
	default y

config HAVE_STD_PC_SERIAL_PORT
	bool

config ARC_CONSOLE
	bool "ARC console support"
	depends on SGI_IP22 || SNI_RM200_PCI

config ARC_MEMORY
	bool
	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
	default y

config ARC_PROMLIB
	bool
	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
	default y

config ARC64
	bool
	depends on SGI_IP27
	default y

config BOOT_ELF64
	bool
	depends on SGI_IP27
	default y

#config MAPPED_PCI_IO y
#	bool
#	depends on SGI_IP27
#	default y

config QL_ISP_A64
	bool
	depends on SGI_IP27
	default y

config TOSHIBA_BOARDS
	bool
	depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
	default y

endmenu

menu "CPU selection"

choice
	prompt "CPU type"
	default CPU_R4X00

config CPU_MIPS32
	bool "MIPS32"

config CPU_MIPS64
	bool "MIPS64"

config CPU_R3000
	bool "R3000"
	depends on MIPS32
	help
	  Please make sure to pick the right CPU type. Linux/MIPS is not
	  designed to be generic, i.e. Kernels compiled for R3000 CPUs will
	  *not* work on R4000 machines and vice versa.  However, since most
	  of the supported machines have an R4000 (or similar) CPU, R4x00
	  might be a safe bet.  If the resulting kernel does not work,
	  try to recompile with R3000.

config CPU_TX39XX
	bool "R39XX"
	depends on MIPS32

config CPU_VR41XX
	bool "R41xx"
	help
	  The options selects support for the NEC VR41xx series of processors.
	  Only choose this option if you have one of these processors as a
	  kernel built with this option will not run on any other type of
	  processor or vice versa.

config CPU_R4300
	bool "R4300"
	help
	  MIPS Technologies R4300-series processors.

config CPU_R4X00
	bool "R4x00"
	help
	  MIPS Technologies R4000-series processors other than 4300, including
	  the R4000, R4400, R4600, and 4700.

config CPU_TX49XX
	bool "R49XX"

config CPU_R5000
	bool "R5000"
	help
	  MIPS Technologies R5000-series processors other than the Nevada.

config CPU_R5432
	bool "R5432"

config CPU_R6000
	bool "R6000"
	depends on MIPS32 && EXPERIMENTAL
	help
	  MIPS Technologies R6000 and R6000A series processors.  Note these
	  processors are extremly rare and the support for them is incomplete.

config CPU_NEVADA
	bool "RM52xx"
	help
	  QED / PMC-Sierra RM52xx-series ("Nevada") processors.

config CPU_R8000
	bool "R8000"
	depends on MIPS64 && EXPERIMENTAL
	help
	  MIPS Technologies R8000 processors.  Note these processors are
	  uncommon and the support for them is incomplete.

config CPU_R10000
	bool "R10000"
	help
	  MIPS Technologies R10000-series processors.

config CPU_RM7000
	bool "RM7000"

config CPU_RM9000
	bool "RM9000"

config CPU_SB1
	bool "SB1"

endchoice

choice
	prompt "Kernel page size"
	default PAGE_SIZE_4KB

config PAGE_SIZE_4KB
	bool "4kB"
	help
	 This option select the standard 4kB Linux page size.  On some
	 R3000-family processors this is the only available page size.  Using
	 4kB page size will minimize memory consumption and is therefore
	 recommended for low memory systems.

config PAGE_SIZE_8KB
	bool "8kB"
	depends on EXPERIMENTAL && CPU_R8000
	help
	  Using 8kB page size will result in higher performance kernel at
	  the price of higher memory consumption.  This option is available
	  only on the R8000 processor.  Not that at the time of this writing
	  this option is still high experimental; there are also issues with
	  compatibility of user applications.

config PAGE_SIZE_16KB
	bool "16kB"
	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
	help
	  Using 16kB page size will result in higher performance kernel at
	  the price of higher memory consumption.  This option is available on
	  all non-R3000 family processor.  Not that at the time of this
	  writing this option is still high experimental; there are also
	  issues with compatibility of user applications.

config PAGE_SIZE_64KB
	bool "64kB"
	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
	help
	  Using 64kB page size will result in higher performance kernel at
	  the price of higher memory consumption.  This option is available on
	  all non-R3000 family processor.  Not that at the time of this
	  writing this option is still high experimental; there are also
	  issues with compatibility of user applications.

endchoice

config BOARD_SCACHE
	bool

config IP22_CPU_SCACHE
	bool
	select BOARD_SCACHE

config R5000_CPU_SCACHE
	bool
	select BOARD_SCACHE

config RM7000_CPU_SCACHE
	bool
	select BOARD_SCACHE

config SIBYTE_DMA_PAGEOPS
	bool "Use DMA to clear/copy pages"
	depends on CPU_SB1
	help
	  Instead of using the CPU to zero and copy pages, use a Data Mover
	  channel.  These DMA channels are otherwise unused by the standard
	  SiByte Linux port.  Seems to give a small performance benefit.

config CPU_HAS_PREFETCH
	bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
	default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000

config VTAG_ICACHE
	bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
	default y if CPU_SB1

config SB1_PASS_1_WORKAROUNDS
	bool
	depends on CPU_SB1_PASS_1
	default y

config SB1_PASS_2_WORKAROUNDS
	bool
	depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
	default y

config SB1_PASS_2_1_WORKAROUNDS
	bool
	depends on CPU_SB1 && CPU_SB1_PASS_2
	default y

config 64BIT_PHYS_ADDR
	bool "Support for 64-bit physical address space"
	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32

config CPU_ADVANCED
	bool "Override CPU Options"
	depends on MIPS32
	help
	  Saying yes here allows you to select support for various features
	  your CPU may or may not have.  Most people should say N here.

config CPU_HAS_LLSC
	bool "ll/sc Instructions available" if CPU_ADVANCED
	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX
	help
	  MIPS R4000 series and later provide the Load Linked (ll)
	  and Store Conditional (sc) instructions. More information is
	  available at <http://www.go-ecs.com/mips/miptek1.htm>.

	  Say Y here if your CPU has the ll and sc instructions.  Say Y here
	  for better performance, N if you don't know.  You must say Y here
	  for multiprocessor machines.

config CPU_HAS_LLDSCD
	bool "lld/scd Instructions available" if CPU_ADVANCED
	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
	help
	  Say Y here if your CPU has the lld and scd instructions, the 64-bit
	  equivalents of ll and sc.  Say Y here for better performance, N if
	  you don't know.  You must say Y here for multiprocessor machines.

config CPU_HAS_WB
	bool "Writeback Buffer available" if CPU_ADVANCED
	default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION
	help
	  Say N here for slightly better performance.  You must say Y here for
	  machines which require flushing of write buffers in software.  Saying
	  Y is the safe option; N may result in kernel malfunction and crashes.

config CPU_HAS_SYNC
	bool
	depends on !CPU_R3000
	default y

#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
#   caches such as R3000, SB1, R7000 or those that look like they're virtually
#   indexed such as R4000/R4400 SC and MC versions or R10000.  So for the
#   moment we protect the user and offer the highmem option only on machines
#   where it's known to be safe.  This will not offer highmem on a few systems
#   such as MIPS32 and MIPS64 CPUs which may have virtual and physically
#   indexed CPUs but we're playing safe.
# - We should not offer highmem for system of which we already know that they
#   don't have memory configurations that could gain from highmem support in
#   the kernel because they don't support configurations with RAM at physical
#   addresses > 0x20000000.
#
config HIGHMEM
	bool "High Memory Support"
	depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)

config ARCH_FLATMEM_ENABLE
	def_bool y
	depends on !NUMA

source "mm/Kconfig"

config SMP
	bool "Multi-Processing support"
	depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
	---help---
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, like most personal computers, say N. If
	  you have a system with more than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all,
	  singleprocessor machines. On a singleprocessor machine, the kernel
	  will run faster if you say N here.

	  People using multiprocessor machines who say Y here should also say
	  Y to "Enhanced Real Time Clock Support", below.

	  See also the <file:Documentation/smp.txt> and the SMP-HOWTO
	  available at <http://www.tldp.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config NR_CPUS
	int "Maximum number of CPUs (2-64)"
	range 2 64
	depends on SMP
	default "64" if SGI_IP27
	default "2"
	help
	  This allows you to specify the maximum number of CPUs which this
	  kernel will support.  The maximum supported value is 32 for 32-bit
	  kernel and 64 for 64-bit kernels; the minimum value which makes
	  sense is 2.

	  This is purely to save memory - each supported CPU adds
	  approximately eight kilobytes to the kernel image.

config PREEMPT
	bool "Preemptible Kernel"
	help
	  This option reduces the latency of the kernel when reacting to
	  real-time or interactive events by allowing a low priority process to
	  be preempted even if it is in kernel mode executing a system call.
	  This allows applications to run more reliably even when the system is
	  under load.

config RTC_DS1742
	bool "DS1742 BRAM/RTC support"
	depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927

config MIPS_INSANE_LARGE
	bool "Support for large 64-bit configurations"
	depends on CPU_R10000 && MIPS64
	help
	  MIPS R10000 does support a 44 bit / 16TB address space as opposed to
	  previous 64-bit processors which only supported 40 bit / 1TB. If you
	  need processes of more than 1TB virtual address space, say Y here.
	  This will result in additional memory usage, so it is not
	  recommended for normal users.

config RWSEM_GENERIC_SPINLOCK
	bool
	default y

endmenu

menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"

config HW_HAS_PCI
	bool

config PCI
	bool "Support for PCI controller"
	depends on HW_HAS_PCI
	help
	  Find out whether you have a PCI motherboard. PCI is the name of a
	  bus system, i.e. the way the CPU talks to the other stuff inside
	  your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
	  say Y, otherwise N.

	  The PCI-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>, contains valuable
	  information about which PCI hardware does work under Linux and which
	  doesn't.

config PCI_DOMAINS
	bool
	depends on PCI

source "drivers/pci/Kconfig"

#
# ISA support is now enabled via select.  Too many systems still have the one
# or other ISA chip on the board that users don't know about so don't expect
# users to choose the right thing ...
#
config ISA
	bool

config EISA
	bool "EISA support"
	depends on SGI_IP22 || SNI_RM200_PCI
	select ISA
	---help---
	  The Extended Industry Standard Architecture (EISA) bus was
	  developed as an open alternative to the IBM MicroChannel bus.

	  The EISA bus provided some of the features of the IBM MicroChannel
	  bus while maintaining backward compatibility with cards made for
	  the older ISA bus.  The EISA bus saw limited use between 1988 and
	  1995 when it was made obsolete by the PCI bus.

	  Say Y here if you are building a kernel for an EISA-based machine.

	  Otherwise, say N.

source "drivers/eisa/Kconfig"

config TC
	bool "TURBOchannel support"
	depends on MACH_DECSTATION
	help
	  TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
	  processors.  Documentation on writing device drivers for TurboChannel
	  is available at:
	  <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.

#config ACCESSBUS
#	bool "Access.Bus support"
#	depends on TC

config MMU
	bool
	default y

config MCA
	bool

config SBUS
	bool

source "drivers/pcmcia/Kconfig"

source "drivers/pci/hotplug/Kconfig"

endmenu

menu "Executable file formats"

source "fs/Kconfig.binfmt"

config TRAD_SIGNALS
	bool
	default y if MIPS32

config BUILD_ELF64
	bool "Use 64-bit ELF format for building"
	depends on MIPS64
	help
	  A 64-bit kernel is usually built using the 64-bit ELF binary object
	  format as it's one that allows arbitrary 64-bit constructs.  For
	  kernels that are loaded within the KSEG compatibility segments the
	  32-bit ELF format can optionally be used resulting in a somewhat
	  smaller binary, but this option is not explicitly supported by the
	  toolchain and since binutils 2.14 it does not even work at all.

	  Say Y to use the 64-bit format or N to use the 32-bit one.

	  If unsure say Y.

config BINFMT_IRIX
	bool "Include IRIX binary compatibility"
	depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN

config MIPS32_COMPAT
	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
	depends on MIPS64
	help
	  Select this option if you want Linux/MIPS 32-bit binary
	  compatibility. Since all software available for Linux/MIPS is
	  currently 32-bit you should say Y here.

config COMPAT
	bool
	depends on MIPS32_COMPAT
	default y

config MIPS32_O32
	bool "Kernel support for o32 binaries"
	depends on MIPS32_COMPAT
	help
	  Select this option if you want to run o32 binaries.  These are pure
	  32-bit binaries as used by the 32-bit Linux/MIPS port.  Most of
	  existing binaries are in this format.

	  If unsure, say Y.

config MIPS32_N32
	bool "Kernel support for n32 binaries"
	depends on MIPS32_COMPAT
	help
	  Select this option if you want to run n32 binaries.  These are
	  64-bit binaries using 32-bit quantities for addressing and certain
	  data that would normally be 64-bit.  They are used in special
	  cases.

	  If unsure, say N.

config BINFMT_ELF32
	bool
	default y if MIPS32_O32 || MIPS32_N32

config PM
	bool "Power Management support (EXPERIMENTAL)"
	depends on EXPERIMENTAL && MACH_AU1X00

endmenu

source "net/Kconfig"

source "drivers/Kconfig"

source "fs/Kconfig"

source "arch/mips/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"

#
# Use the generic interrupt handling code in kernel/irq/:
#
config GENERIC_HARDIRQS
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

config ISA_DMA_API
	bool
	default y